JME016-20 [JIEJIE]
Chip - double mesa SCRs of reverse blocking high-voltage;型号: | JME016-20 |
厂家: | JIEJIE MICROELECTRONICS CO.,Ltd |
描述: | Chip - double mesa SCRs of reverse blocking high-voltage |
文件: | 总3页 (文件大小:176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JIEJIE MICROELECTRONICS CO.,Ltd
JME016-16/18/20
Description:
1) Chip: double mesa SCRs of reverse blocking high-voltage
2) Chip area: 4.5mm×4.5mm (corner gate thyristor)
3) Technology: mesa glass passivation technology, multilayer metallization
technology and non-void welding by vacuum welding technology
Typical Application:
Reactive power compensation, solid state relay, power module, etc.
Absolute Maximum Ratings (Packaged into modules, unless otherwise specified, TC=25℃)
Parameter
Test Conditions
Symbol
Tj
Values
-40-125
Unit
℃
V
Operating junction temperature range
Repetitive peak off-state voltage
Repetitive peak reverse voltage
Average on-state current
Tj=25℃
VDRM
VRRM
IT(AV)
ITSM
1600/1800/2000
1600/1800/2000
16
Tj=25℃
TC=80℃
tp=10ms
tp=10ms
V
A
Peak on-state surge current
I2t value for fusing
190
A
I2t
180
A2s
VD=2/3VDRM tp=200μs
IG=0.3A Tj=125℃
dIG/dt=0.3A/μs
Critical rate of rise of on-state current
dI/dt
150
A/μs
Electrical Characteristics (Packaged into modules, unless otherwise specified, TC=25℃)
Parameter
Peak on-state voltage
Test Conditions
Symbol
Values
Unit
IT=48A tp=380μs
VTM
≤1.8
V
VD=VDRM
TC=25℃
TC=125℃
VR=VRRM
TC=25℃
TC=125℃
Repetitive peak off-state current
Repetitive peak reverse current
IDRM1
IDRM2
≤10
≤3
μA
mA
IRRM1
IRRM2
IGT
≤10
≤3
μA
mA
Triggering gate current
Latching current
VD=12V RL=30Ω
20-50
≤80
mA
mA
mA
V
IG=1.2 IGT
IL
Holding current
IT=1A
IH
≤70
VD=12V RL=30Ω
Triggering gate voltage
VGT
≤1.5
TEL:+86-513-83639777
- 1 / 3-
http://www.jjwdz.com
JIEJIE MICROELECTRONICS CO.,Ltd
VD=VDRM Tj=125℃
Non triggering gate voltage
Critical rate of rise of voltage
VGD
≥0.25
V
VD=2/3VDRM Tj=125℃
dV/dt
≥1000
V/μs
Gate Open
Mechanical Characteristics
Module size
5.1 mm×5.1mm
1.6 mm
Module thickness
3mm×3mm×1.14mm
1×1mm
Welding area of cathode electrode
Welding area of control electrode
A
K
G
symbol
Working Conditions
1) No severe mechanical shock as impact and drop off in the process of transportation, storage and
working of product.
2) Storage conditions
Temperature: 5~40℃
Relative humidity: ≤45%
Storage time: 3 days for the open package; 3 months for the closed package
3) Welding conditions
Recommended solder component: Sn63Sb37 (or lead-free solder of liquid quadrant less than 240℃)
Recommended soldering conditions: shown in Table 1
4) Welding in the gate spot is recommended to be completed one-time by using fixture. If it is necessary
to use a soldering iron, the temperature of soldering iron is controlled within 280℃ and time is controlled
within 20s.
TEL:+86-513-83639777
- 2 / 3-
http://www.jjwdz.com
JIEJIE MICROELECTRONICS CO.,Ltd
Table 1
Sn63Sb37 Soldering conditions
Average heating rate
3℃/s (Max)
Low limit of temperature
TS(Min)
100℃
Preheating activation Upper limit of temperature TS(Max) 150℃
Time (min ~ max)
tS
60 ~ 90s
Melting point temperature
Peak temperature
TL
183℃ (Sn63Sb37)
240℃ (+0/-5℃)
TP
tp
Reflow zone
Reflow time
10~30s
(Peak temperature ±5℃)
Melting time
TL
40~60s
3.5℃/s
Maximum cooling rate
Recommended process time
300 ~ 360s
Sn63Pb37
T
p
250℃
t
P
T
L
(10-30S)
200℃
150℃
100℃
t
L
Ts(max)
(40-60S)
Ts(min)
ts
60-90S
Ordering Information
J M E 016 -16
JieJie Microelectronics Co.,Ltd
16:VDRM/VRRM≥1600V
18:VDRM/VRRM≥1800V
20:VDRM/VRRM≥2000V
Module of series
E:Edge and corner gate
IT(AV)=16A
TEL:+86-513-83639777
- 3 / 3-
http://www.jjwdz.com
相关型号:
©2020 ICPDF网 联系我们和版权申明