ALT22A152CB200 [KEMET]

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 1500uF, Chassis Mount, CAN;


型号：	ALT22A152CB200
厂家：	KEMET CORPORATION
描述：	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 1500uF, Chassis Mount, CAN
文件：	总4页 (文件大小：307K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

series

Listed here are only samples of the range

of Solder Pin and Tag Capacitors we can

produce.

It should be pointed out that the ALP, sol-

der pin, ranges are an older design and as

such should not be considered for any new

applications. Details are incorporated here,

primarily, for maintenance/replacement

purposes.

Capacitance 100µF to

Range 68,000µF

22µF to

47µF to

68,000µF

150,000µF

ALP/T 10, 20 and 22 Series

Capacitance

-10% +30%

(200V ±20%)

A range of 85°C capacitors designed to meet the demands of

inverters, switch mode power supplies and energy storage

circuits. It should be noted that for any new applications

requiring board mounting terminations, ALP, the ALC ranges

of snap-in capacitors produced by BHC should be considered.

The ALP/T10 is the older “General Purpose” range whereas

the ALP/T20 is the “Long Life” equivalent. ALP/T22 is a

higher CV version of ALP/T20 with the same long life

characteristics.

Tolerance -10% +30%

±20%

10V to

450V d.c.

-40°C to

+85°C

22 x 35 to

40 x 105

Voltage 10V to

Range 385V d.c.

Temperature -40°C to

range +85°C

10V to

450V d.c.

-40°C to

+85°C

22 x 35 to

40 x 105

Case sizes 22 x 35 to

mm 40 x 105

case sizes

ALP Pin style

Designed for PCB mounting to DIN 41238.

ALT Tag style

Designed for flying lead connection.

ALT11\21\23

Stud Mounting

Max torque: stud M8:4NM

DIMENSIONS (sleeved) mm

Capacitor marking

CASE

CODE

±2

105

MOUNTING CLIP

FOR ALT STYLE

WEIGHT grams

The capacitors are marked with items 1 to 6 from the

following list as a minimum, and as much of the remaining

information as is practical.

±1

nom.

V2/H1

V3/H2

1. Rated capacitance in µF

2. Rated voltage d.c.

3. Polarity of terminations

4. Tolerance on rated capacitance

5. Date code/Batch number

6. BHC part number

7. Environmental classification

125

170

For details of mounting clips and stud mounting kits see

pages 52 & 53.

Ordering information

For details of ordering see pages 54 & 55.

technical data

ALP Pin and mounting configurations

25mm dia can

30mm dia can

35mm dia can

40mm dia can

Printed circuit board hole positions, viewed from component side.

Connections: Hole 1 represents +ve, Hole 5 represents -ve. Terminals 2,3 and 4 may be at negative terminal potential due

to the presence of electrolyte. They are intended for mechanical connections only. It is recommended that they are

soldered to the printed circuit board. Additional dummy pins are provided for stability. Note that the case and dummy pins

may be at negative terminal potential.

TECHNICAL DATA

Vibration

相关型号：