C0603C200C2GAC7411 [KEMET]
Ceramic Capacitor, Multilayer, Ceramic, 200V, 1.25% +Tol, 1.25% -Tol, C0G, -/+30ppm/Cel TC, 0.00002uF, 0603,;
| 型号： | C0603C200C2GAC7411 |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Ceramic Capacitor, Multilayer, Ceramic, 200V, 1.25% +Tol, 1.25% -Tol, C0G, -/+30ppm/Cel TC, 0.00002uF, 0603, |
| 文件： | 总19页 (文件大小：1011K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Overview
KEMET’s C0G dielectric features a 125°C maximum operating
temperature and is considered “stable.” The Electronics
temperature. Capacitance change is limited to ±30ppm/ºC from
-55°C to +125°C.
Components, Assemblies & Materials Association (EIA)
characterizes C0G dielectric as a Class I material. Components
of this classification are temperature compensating and are suited
for resonant circuit applications or those where Q and stability of
capacitance characteristics are required. C0G exhibits no change
in capacitance with respect to time and voltage and boasts a
negligible change in capacitance with reference to ambient
Benefits
• Negligible capacitance change with respect to temperature from
-55°C to +125°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for
excellent solderability
• -55°C to +125°C operating temperature range
• RoHS compliant
• EIA 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825,
2220 and 2225 case sizes
• DC voltage ratings of 10V, 16V, 25V, 50V,100V and 200V
• Capacitance offerings ranging from 0.5pF up to 0.47μF
• Available capacitance tolerances of ±0.25pF, ±0.5pF, ±1%,
±2%, ±5%, ±10% and ±20%
• SnPb plated termination finish option available upon request (5% min)
Applications
• No piezoelectric noise
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
• Preferred capacitance solution at line frequencies and into the
MHz range
Typical applications include critical timing, tuning, circuits requiring
low loss, circuits with pulse, high current, decoupling, bypass,
filtering, transient voltage suppression, blocking and energy
storage.
• No capacitance change with respect to applied rated DC voltage
Ordering Information
C
1206
C
104
J
3
G
A
C
TU
Case Size Specification/
Capacitance
Code (pF)
Capacitance
Tolerance1
Failure Rate/
Design
Packaging/Grade
(C-Spec)3
Ceramic
Voltage
Dielectric
G = C0G
Termination Finish2
(L" x W")
Series
0201
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
C = Standard
2 Sig. Digits +
Number of Zeros
Use 9 for
1.0 - 9.9pF
Use 8 for
0.5 - .99pF
ex. 2.2pF = 229
ex. 0.5pF = 508
C = ±0.25pF 8 = 10V
A = N/A
C = 100% Matte Sn Blank = Bulk
TU = 7" Reel
D = ±0.5pF
F = ± 1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
4 = 16V
3 = 25V
5 = 50V
1 = 100V
2 = 200V
Unmarked
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2 Additional termination finish options may be available. Contact KEMET for details.
3 Additional reeling or packaging options may be available. Contact KEMET for details.
One WORLD
One Brand
One Strategy
One Focus
One Team
One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
100% Tin or SnPb Plate
L
Dimensions – Millimeters (Inches)
W
B
T
Nickel Plate
S
Conductive Metalization
Electrodes
EIA
Size
Code
0201
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
Metric
Size
Code
0603
1005
1608
2012
S
L
W
Width
T
B
Mounting
Technique
Separation
Min.
Length
Thickness
Bandwidth
0.60 (.024) ± 0.03 (.001) 0.30 (.012) ± 0.03 (.001)
1.00 (.040) ± 0.05 (.002) 0.50 (.020) ± 0.05 (.002)
1.60 (.063) ± 0.15 (.006) 0.80 (.032) ± 0.15 (.006)
2.00 (.079) ± 0.20 (.008) 1.25 (.049) ± 0.20 (.008)
3.20 (.126) ± 0.20 (.008) 1.60 (.063) ± 0.20 (.008)
3.20 (.126) ± 0.20 (.008) 2.50 (.098) ± 0.20 (.008)
4.70 (.185) ± 0.50 (.020) 2.00 (.079) ± 0.20 (.008)
4.50 (.177) ± 0.30 (.012) 3.20 (.126) ± 0.30 (.012)
4.50 (.177) ± 0.30 (.012) 6.40 (.252) ± 0.40 (.016)
5.70 (.224) ± 0.40 (.016) 5.00 (.197) ± 0.40 (.016)
5.60 (.220) ± 0.40 (.016) 6.40 (.248) ± 0.40 (.016)
0.15 (.006) ± 0.05 (.002)
0.30 (.012) ± 0.10 (.004)
0.35 (.014) ± 0.15 (.006)
0.50 (0.02) ± 0.25 (.010)
0.50 (0.02) ± 0.25 (.010)
0.50 (0.02) ± 0.25 (.010)
0.60 (.024) ± 0.35 (.014)
0.60 (.024) ± 0.35 (.014)
0.60 (.024) ± 0.35 (.014)
0.60 (.024) ± 0.35 (.014)
0.60 (.024) ± 0.35 (.014)
N/A
Solder Reflow Only
0.30 (.012)
0.70 (.028)
0.75 (.030)
Solder Wave or
Solder Reflow
3216
3225
4520
4532
4564
5650
5664
N/A
Solder Reflow Only
Qualification/Certification
Commercial grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table
4, Performance and Reliability.
Environmental Compliance
RoHS compliant
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
-55°C to +125°C
±30PPM/ºC
0%
Capacitance Change with Reference to +25°C and 0 Vdc Applied (TCC)
Aging Rate (Max % Cap Loss/Decade Hour)
250% of rated voltage
(5 ± 1 seconds and charge/discharge not exceeding 50mA)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit @ 25ºC
0.1%
1000 megohm microfarads or 100GΩ
(Rated voltage applied for 120 ± 5 secs @ 25°C)
Insulation Resistance (IR) Limit @ 25°C
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and Dissipation Factor (DF) measured under the following conditions:
1MHz ± 100kHz and 1.0Vrms ± 0.2V if capacitance ≤1000pF
1kHz ± 50Hz and 1.0Vrms ± 0.2V if capacitance >1000pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic
Level Control (ALC). The ALC feature should be switched to "ON".
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
C0G
Rated DC Voltage Capacitance Value
All All
DF (%)
0.5
Cap Shift
IR
0.3% or ± 0.25 pF
10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Table 1A – (0201 - 1206 Case Sizes)
Series
Voltage Code
Voltage DC
C0201
C0402
C0603
C0805
C1206
Cap
Code
8
4
3
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
Cap
Cap Tolerance
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions
0.50-0.75 pF 508-758
1.0-2.4 pF 109-249
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
BB BB BB BB
CB CB CB CB CB CB DC DC DC DC DC DC
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
2.7-5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
279
569
629
689
759
829
919
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB¹ AB¹ AB¹ BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
AB² AB² AB² BB BB BB BB
BB BB BB BB
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
AB² AB² AB² BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
BB BB BB BB BB
UD
UD
UD
110-180 pF 111-181
200-330 pF 201-331
360-430 pF 361-431
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
DC DC DC DC DC DC EB EB EB EB EB EB
DC DC DC DC DC DC EB EB EB EB EB EB
DC DC DC DC DC DD EB EB EB EB EB EB
DC DC DC DC DC DC EB EB EB EB EB EB
DC DC DC DC DC DC EB EB EB EB EB EB
DC DC DC DC DC DC EB EB EB EB EB EB
DC DC DC DC DD DD EB EB EB EB EB EB
UD
UD
UD
UD
UD
UD
UD
UD
470 pF
510 pF
560 pF
471
511
561
620-820 pF 621-821
910 pF
911
1,0
1,1
1,2
1,3
1,5
1,6
1,8
2,0
2,2
2,4
2,7
3,0
C
1206
C
104
J
3
G
A
C
TU
Case Size Specification/
Capacitance
Capacitance
Tolerance1
Failure Rate/
Packaging/Grade
2
Ceramic
Voltage
Dielectric
Termination Finish
(L" x W")
Series
Code (pF)
Design
(C-Spec)3
C = 100% Matte Sn Blank = Bulk
0201
0402
0603
0805
1206
1210
1808
1812
1825
C = Standard
2 Sig. Digits +
C = ±0.25pF 8 = 10V
G = C0G
A = N/A
4 = 16V
Number of Zeros
D = ±0.5pF
F = ± 1%
G = ±2%
J = ±5%
TU = 7" Reel
3 = 25V
Use 9 for
Unmarked
5 = 50V
1.0 - 9.9pF
Use 8 for
1 = 100V
2 = 200V
0.5 - .99pF
ex. 2.2pF = 229
K = ±10%
M = ±20%
ex. 0.5pF = 508
C
2220
2225
UD
xx¹ A
xx²
The
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
4
Roll Over for
Order Info.
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Table 1A – (0201 - 1206 Case Sizes) con't
Series
Voltage Code
Voltage DC
C0201
C0402
C0603
C0805
C1206
Cap
Code
8
4
3
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
Cap
Cap Tolerance
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,600 pF
6,200 pF
6,800 pF
7,500 pF
8,200 pF
9,100 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
27,000 pF
33,000 pF
39,000 pF
47,000 pF
56,000 pF
68,000 pF
82,000 pF
0.10 µF
332
362
392
432
472
512
562
622
682
752
822
912
103
123
153
183
223
273
333
393
473
563
683
823
104
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB CB
CB CB CB CB
CB CB CB CB
CB CB CB CB
CB CB CB CB
CB CB CB
DD DD DD DD DC
DD DD DD DD DC
DE DE DE DE DC
DE DE DE DE DC
DE DE DE DE DC
DE DE DE DE DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DD
DC DC DC DC DE
DC DC DC DD DG
DC DC DC DD
EC EC EC EC EE
EC EC EC EC EE
EC EC EC EC EF
EC EC EC EC EC
EC EC EC EC EC
ED ED ED ED ED
ED ED ED ED ED
EB EB EB EB EB
EB EB EB EB EB
EB EB EB EB EB
EC EC EC EC EB
EC EC EC EC EB
ED ED ED ED EB
EB EB EB EB EB
EB EB EB EB EB
EB EB EB EB EB
EB EB EB EB EC
EB EB EB EB EE
EB EB EB EB EE
EC EC EC EE EH
EC EC EC EE EH
ED ED ED EF
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
DD DD DD DF
DF DF DF
DG DG DG
DG DG DG
DG DG DG
EF EF EF EH
EH EH EH EH
EH EH EH
Voltage DC
Cap
Code
Voltage Code
8
4
3
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
8
4
3
5
1
2
Cap
Series
C0201
C0402
C0603
C0805
C1206
Table 1B – (1210 - 2225 Case Sizes)
Series
C1210
C1808
C1812
C1825
C2220
C2225
Cap
Code
Voltage Code
8
4
3
5
1
2
5
1
2
5
1
2
5
1
2
3
1
2
5
1
2
Cap
Voltage DC
Cap Tolerance
Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions
0.5-0.75 pF 508-758
1.0-2.4 pF 109-249
2.7
D
M
FB
FB
FB
FB
FB
FB
10
C
1206
C
104
J
3
G
A
C
TU
15
Case Size Specification/
Capacitance
Capacitance
Failure Rate/
Design
Packaging/Grade
(C-Spec)3
27
Ceramic
Voltage
Dielectric
G = C0G
Termination Finish2
1
56
(L" x W")
0201
0402
0603
0805
1206
Series
Code (pF)
Tolerance
91-
220
330
470
C = Standard
2 Sig. Digits +
C = ±0.25pF 8 = 10V
A = N/A
C = 100% Matte Sn Blank = Bulk
TU = 7" Reel
Number of Zeros
D = ±0.5pF
4 = 16V
Use 9 for
F = ± 1%
3 = 25V
Unmarked
1,0
1,1
1,2
1,3
1,5
1.0 - 9.9pF
G = ±2%
5 = 50V
Use 8 for
J = ±5%
1 = 100V
1210
0.5 - .99pF
K = ±10%
2 = 200V
1808
ex. 2.2pF = 229
M = ±20%
1812
ex. 0.5pF = 508
1825
2220
2225
C
UD
The
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
5
Roll Over for
Order Info.
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Table 1B – (1210 - 2225 Case Sizes) con't
Series
C1210
C1808
C1812
C1825
C2220
C2225
Cap
Code
Voltage Code
8
4
3
5
1
2
5
1
2
5
1
2
5
1
2
3
1
2
5
1
2
Cap
Voltage DC
Cap Tolerance
Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions
1,600 pF
1,800 pF
2,000 pF
2,200 pF
2,400 pF
2,700 pF
3,000 pF
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,600 pF
6,200 pF
6,800 pF
7,500 pF
8,200 pF
9,100 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
27,000 pF
33,000 pF
39,000 pF
47,000 pF
56,000 pF
68,000 pF
82,000 pF
0.10 µF
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
474
564
684
824
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FF
FB
FB
FB
FB
FC
FC
FE
FF
FG
FG
FB
FB
FB
FB
FB
FB
FB
FB
FC
FE
FG
FH
FJ
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FF
FB
FB
FB
FB
FC
FC
FE
FF
FG
FG
FB
FB
FB
FB
FB
FB
FB
FB
FC
FE
FG
FH
FJ
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FF
FB
FB
FB
FB
FC
FC
FE
FF
FG
FG
FB
FB
FB
FB
FB
FB
FB
FB
FC
FE
FG
FH
FJ
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FF
FB
FB
FB
FB
FC
FC
FE
FF
FG
FG
FB
FB
FB
FB
FB
FB
FB
FC
FF
FG
FH
FM
FB
FB
FC
FC
FC
FC
FC
FF
FF
FF
FF
FG
FG
FG
FG
FG
FC
FC
FE
FF
FB
FB
FB
FB
FB
FB
FE
FE
FF
FG
FH
FM
FE
FE
FE
FG
FC
FC
FF
FF
FF
FF
FF
FG
FG
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
LF
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
GB GD
GB GH
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
KE
FG
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
GB
GJ
JB
JB
JB
JB
UD
UD
GB GH
UD
GB GH
GB GG
HB
HB
HB
HB
HB
HB
HB
HB
HB
HE
HE
HG
HE
HE
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JD
JG
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JD
JD
JF
JG
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB GD
GB GH
GD GN
GH
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.47 µF
0.56 µF
FK
FK
FK
GK
0.68 µF
0.82 µF
C
G
1206
C
104
J
3
A
C
TU
Case Size Specification/
Voltage
Capacitance
Capacitance
Tolerance1
Failure Rate/
Design
Packaging/Grade
(C-Spec)3
Ceramic
Dielectric
Termination Finish2
(L" x W")
Series
Code (pF)
0201
C = Standard
2 Sig. Digits +
Number of Zeros
Use 9 for
1.0 - 9.9pF
Use 8 for
0.5 - .99pF
ex. 2.2pF = 229
ex. 0.5pF = 508
C = ±0.25pF 8 = 10V
G = C0G
A = N/A
C = 100% Matte Sn Blank = Bulk
T
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
D = ±0.5pF
F = ± 1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
4 = 16V
3 = 25V
5 = 50V
1 = 100V
2 = 200V
TU = 7" Reel
Unmarked
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
6
Roll Over for
Order Info.
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Table 2 – Chip Thickness/Packaging Quantities
Thickness
Code
Chip
Size
Thickness ±
Range (mm)
QTY per Reel QTY per Reel QTY per Reel QTY per Reel QTY per Bulk
7" Plastic
13" Plastic
7" Paper
15000
15000
10000
10000
13" Paper
Cassette
AA
AB
BB
BC
PA
CB
CC
CD
MA
DB
DC
DD
DL
1005
0201
0402
0402
0508
0603
0603
0603
0612
0805
0805
0805
0805
0805
0805
0805
0805
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1220
1632
1706
1706
1706
1808
1808
1808
1808
1808
1808
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1825
1825
1825
1825
1825
Chip
0.20 ± 0.02
0.30 ± 0.03
0.50 ± 0.05
0.50 ± 0.10
0.80 ± 0.10
0.80 ± 0.07
0.80 ± 0.10
0.80 ± 0.15
0.80 ± 0.10
0.60 ± 0.10
0.78 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.25 ± 0.20
0.78 ± 0.10
0.80 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.20 ± 0.15
1.25 ± 0.15
1.60 ± 0.15
1.60 ± 0.20
1.70 ± 0.20
0.78 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.40 ± 0.15
1.50 ± 0.20
1.55 ± 0.15
1.60 ± 0.20
1.70 ± 0.20
1.85 ± 0.20
1.85 ± 0.20
1.90 ± 0.20
2.10 ± 0.20
2.25 ± 0.20
2.50 ± 0.20
3.35 ± 0.10
6.15 ± 0.15
0.80 ± 0.10
0.80 ± 0.10
0.90 ± 0.10
1.00 ± 0.10
1.00 ± 0.15
0.90 ± 0.10
1.00 ± 0.10
1.00 ± 0.15
1.40 ± 0.15
1.60 ± 0.15
2.00 ± 0.15
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.30 ± 0.10
1.40 ± 0.15
1.50 ± 0.10
1.55 ± 0.10
1.60 ± 0.20
1.70 ± 0.15
1.70 ± 0.20
1.90 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
2.65 ± 0.35
5.00 ± 0.50
1.10 ± 0.15
1.15 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.50 ± 0.15
Thickness ±
50000
50000
50000
50000
4000
4000
10000
10000
4000
4000
4000
10000
10000
10000
15000
15000
15000
4000
4000
4000
10000
10000
10000
15000
15000
15000
4000
2500
2500
2500
2500
4000
2000
4000
4000
2500
2500
2500
2500
2000
2000
2000
4000
4000
4000
2500
2500
2500
2000
2000
2000
2000
2000
2000
2000
1500
2000
2000
1000
500
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
8000
DE
DF
DG
DH
EB
4000
10000
EK
EC
EN
ED
EE
EF
EM
EG
EH
EJ
Package Quantity
Based on Finished Chip
Thickness Specifications
8000
8000
FB
10000
10000
10000
10000
10000
10000
8000
FC
FD
FE
FF
FG
FL
FO
FH
FP
8000
8000
8000
FM
FJ
8000
8000
FN
8000
FT
4000
FK
8000
FR
8000
FS
4000
FV
1800
FW
PA
200
1000
4000
4000
4000
4000
4000
2500
2500
2500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
10000
10000
10000
10000
10000
10000
10000
10000
4000
MA
NA
NB
NC
LD
LE
LF
LA
LB
4000
LC
4000
GB
GC
GD
GE
GH
GF
GG
GK
GJ
4000
4000
4000
4000
4000
4000
4000
4000
4000
GN
GL
GM
GO
GP
GR
HB
HC
HD
HE
HF
4000
4000
4000
2000
500
1400
350
1000
1000
1000
1000
1000
1000
QTY per Reel
4000
4000
4000
4000
4000
Thickness
Code
QTY per Reel
QTY per Reel
7" Paper
QTY per Reel
13" Paper
QTY per Bulk
Cassette
Size
Range (mm)
7" Plastic
13" Plastic
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Table 2 – Chip Thickness/Packaging Quantities con’t
Thickness
Code
Chip
Size
Thickness ±
Range (mm)
QTY per Reel QTY per Reel QTY per Reel QTY per Reel QTY per Bulk
7" Plastic
13" Plastic
7" Paper
13" Paper
Cassette
HG
1825
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2220
2225
2225
2225
2225
2225
Chip
1.60 ± 0.20
1.00 ± 0.15
1.10 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.50 ± 0.15
1.60 ± 0.20
1.70 ± 0.15
1.80 ± 0.15
2.40 ± 0.15
3.50 ± 0.30
5.00 ± 0.50
1.00 ± 0.15
1.10 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.60 ± 0.20
Thickness ±
1000
1000
4000
4000
JB
JC
1000
4000
JD
1000
4000
JE
1000
4000
JF
1000
4000
JP
1000
4000
JG
1000
4000
JH
1000
4000
JO
500
2000
JP
250
850
600
JR
150
KB
1000
4000
KC
1000
4000
KD
1000
4000
KE
1000
4000
KF
1000
4000
Thickness
Code
QTY per Reel
7" Plastic
QTY per Reel
13" Plastic
QTY per Reel
7" Paper
QTY per Reel
13" Paper
QTY per Bulk
Cassette
Size
Range (mm)
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC-7351
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
EIA
Size
Code
Metric
Size
Code
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
01005
0201
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
0402
0603
1005
1608
2012
3216
3225
4520
4532
4564
5650
5664
0.33
0.38
0.50
0.90
1.00
1.60
1.60
2.30
2.15
2.15
2.75
2.70
0.46
0.56
0.72
1.15
1.35
1.35
1.35
1.75
1.60
1.60
1.70
1.70
0.43
0.52
0.72
1.10
1.55
1.90
2.80
2.30
3.60
6.90
5.50
6.90
1.60
1.80
2.20
4.00
4.40
5.60
5.65
7.40
6.90
6.90
8.20
8.10
0.90
1.00
1.20
2.10
2.60
2.90
3.80
3.30
4.60
7.90
6.50
7.90
0.28
0.33
0.45
0.80
0.90
1.50
1.50
2.20
2.05
2.05
2.65
2.60
0.36
0.46
0.62
0.95
1.15
1.15
1.15
1.55
1.40
1.40
1.50
1.50
0.33
0.42
0.62
1.00
1.45
1.80
2.70
2.20
3.50
6.80
5.40
6.80
1.30
1.50
1.90
3.10
3.50
4.70
4.70
6.50
6.00
6.00
7.30
7.20
0.70
0.80
1.00
1.50
2.00
2.30
3.20
2.70
4.00
7.30
5.90
7.30
0.23
0.28
0.40
0.60
0.75
1.40
1.40
2.10
1.95
1.95
2.55
2.50
0.26
0.36
0.52
0.75
0.95
0.95
0.95
1.35
1.20
1.20
1.30
1.30
0.23
0.32
0.52
0.90
1.35
1.70
2.60
2.10
3.40
6.70
5.30
6.70
1.00
1.20
1.60
2.40
2.80
4.00
4.00
5.80
5.30
5.30
6.60
6.50
0.50
0.60
0.80
1.20
1.70
2.00
2.90
2.40
3.70
7.00
5.60
7.00
Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder
processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206
• All other EIA case sizes are limited to solder reflow only
Recommended Soldering Profile:
• KEMET recommends following the guidelines outlined in IPC/JEDEC J-STD-020
Table 4 – Performance & Reliability: Test Methods and Conditions
Stress
Terminal Strength
Board Flex
Reference
JIS-C-6429
JIS-C-6429
Test or Inspection Method
Appendix 1, Note: Force of 1.8kg for 60 seconds.
Appendix 2, Note: 2mm (min) for all except 3mm for C0G.
Magnification 50 X. Conditions:
a) Method B, 4 hours @ 155°C, dry heat @ 235°C
b) Method B @ 215°C category 3
Solderability
J-STD-002
c) Method D, category 3 @ 260°C
Temperature Cycling
Biased Humidity
JESD22 Method JA-104
MIL-STD-202 Method 103
1000 Cycles (-55°C to +125°C), Measurement at 24 hours. +/- 2 hours after test conclusion.
Load Humidity: 1000 hours 85°C/85%RH and Rated Voltage. Add 100K ohm resistor. Measurement
at 24 hours. +/- 2 hours after test conclusion.
Low Volt Humidity: 1000 hours 85°C/85%RH and 1.5V. Add 100K ohm resistor.
Measurement at 24 hours. +/- 2 hours after test conclusion.
t = 24 hours/cycle. Steps 7a & 7b not required. Unpowered.
Measurement at 24 hours. +/- 2 hours after test conclusion.
-55°C/+125°C. Note: Number of cycles required-300, Maximum transfer time-20 seconds, Dwell
time-15 minutes. Air-Air.
Moisture Resistance
Thermal Shock
MIL-STD-202 Method 106
MIL-STD-202 Method 107
MIL-STD-202 Method 108
/ EIA -198
High Temperature Life
1000 hours at 125°C (85°C for X5R, Z5U and Y5V) with 2 X rated voltage applied.
Storage Life
MIL-STD-202 Method 108
MIL-STD-202 Method 213
MIL-STD-202 Method 215
150°C, 0VDC, for 1000 Hours.
Mechanical Shock
Resistance to Solvents
Figure 1 of Method 213, Condition F.
Add aqueous wash chemical - OKEM Clean or equivalent.
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC, and maximum storage humidity not exceed
70% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres
should be free of chlorine and sulfur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably
within 1.5 years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Tape & Reel Packaging Information
KEMET offers Multilayer Ceramic Chip Capacitors packaged in
8mm, 12mm and 16mm tape on 7" and 13" reels in accordance
with EIA standard 481. This packaging system is compatible with
all tape fed automatic pick and place systems. See Table 2 for
details on reeling quantities for commercial chips.
Bar Code Label
Anti-Static Reel
®
Embossed Plastic* or
Punched Paper Carrier.
Chip and KPS Orientation in Pocket
(except 1825 Commercial, and 1825 & 2225 Military)
KEMET
Sprocket Holes
Embossment or Punched Cavity
8mm, 12mm
or 16mm Carrier Tape
Anti-Static Cover Tape
(.10mm (.004") Max Thickness)
178mm (7.00")
or
330mm (13.00")
*EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only.
Table 5 – Carrier Tape Configuration (mm)
EIA Case Size
Tape size (W)*
Pitch (P1)*
01005 - 0402
0603 - 1210
8
8
2
4
1805 - 1808
12
12
12
16
8
4
≥ 1812
8
KPS 1210
8
KPS 1812 & 2220
Array 0508 & 0612
12
4
*Refer to Figure 1 for W and P1 carrier tape reference locations.
*Refer to Table 6 for tolerance specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ±0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 5
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 6 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Min.
Note 1
1.0
(0.039)
R Ref.
Note 2
25.0
(0.984)
S1 Min.
Note 3
Tape Size
8mm
D0
E1
P0
P2
T Max. T1 Max.
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ± 0.10
4.0 ± 0.10
2.0 ± 0.05
0.600
(0.024)
0.600
0.100
12mm
(0.069 ± 0.004) (0.157 ± 0.004) (0.079 ± 0.002)
(0.024) (0.004)
1.5
(0.059)
30
(1.181)
16mm
Variable Dimensions — Millimeters (Inches)
B1 Max.
Note 4
4.35
(0.171)
Tape Size
8mm
Pitch
E2 Min.
F
P1
T2 Max
W Max
A0,B0 & K0
Note 5
6.25
(0.246)
3.5 ± 0.05
(0.138 ± 0.002) (0.157 ± 0.004)
4.0 ± 0.10
2.5
(0.098)
8.3
(0.327)
Single (4mm)
Single (4mm) &
Double (8mm)
8.2
(0.323)
10.25
(0.404)
5.5 ± 0.05
(0.217 ± 0.002) (0.315 ± 0.004)
8.0 ± 0.10
4.6
(0.181)
12.3
(0.484)
12mm
12.1
(0.476)
14.25
(0.561)
5.5 ± 0.05 8.0 ± 0.10
(0.217 ± 0.002) (0.315 ± 0.004)
4.6
(0.181)
16.3
(0.642)
16mm
Triple (12mm)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4).
(e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket.
(f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Figure 2 – Punched (Paper) Carrier Tape Dimensions
T
P2
[10 pitches cumulative
tolerance on tape ±0.2 mm]
E
1
Po
ØDo
0
A
F
W
2
E
0
B
Bottom Cover Tape
P
1
G
Cavity Size,
See
1
T
1
T
Top Cover Tape
Center Lines of Cavity
Note 1, Table 7
Bottom Cover Tape
User Direction of Unreeling
Table 7 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
R Ref.
Note 2
Tape Size
8mm
D0
E1
P0
P2
T1Max
G Min
1.5 +0.10-0.0
(0.059 +0.004, -0.0)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
0.10
(.004) Max.
0.75
(.030)
25
(.984)
Variable Dimensions — Millimeters (Inches)
Tape Size
8mm
Pitch
E2 Min
F
P1
T Max
W Max
A0 B0
2.0 ± 0.05
(0.079 ± 0.002)
4.0 ± 0.10
8.3
(0.327)
8.3
Half (2mm)
Single (4mm)
6.25
(0.246)
3.5 ± 0.05
(0.138 ± 0.002)
1.1
(0.098)
Note 5
8mm
(0.157 ± 0.004)
(0.327)
1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that:
a) the component does not protrude beyond either surface of the carrier tape.
b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4).
e) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
2. The tape with or without components shall pass around R without damage (see Figure 5).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8mm
0.1 Newton to 1.0 Newton (10gf to 100gf)
0.1 Newton to 1.3 Newton (10gf to 130gf)
12mm & 16mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16-200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16-56
72-200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Maximum Lateral Movement
8mm & 12mm Tape
16mm Tape
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
0.5 mm maximum
Figure 5 – Bending Radius
Embossed
Carrier
Punched
Carrier
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Figure 6 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm min.)
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 8 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8mm
A
B Min
C
D Min
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12mm
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8mm
N Min
W1
W2 Max
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
50
(1.969)
12.4 +2.0/-0.0
18.4
Shall accommodate tape width
without interference
12mm
16mm
(0.488 +0.078/-0.0)
(0.724)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Figure 7 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
Round Sprocket Holes
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm Min.
Leader
Trailer
160 mm minimum,
Components
400 mm Minimum,
Top Cover Tape
Figure 8 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Figure 9 – Bulk Cassette Packaging (Ceramic Chips Only)
Meets Dimensional Requirements IEC-286 and EIAJ 7201
Unit mm *Reference
53 3*
10*
1.5 ± 00.1
2.0 ± 00.1
3.0 ± 00.2
5 0*
110 ± 0.7
Table 9 – Capacitor Dimensions for Bulk Cassette
Cassette Packaging – Millimeters
EIA Size Metric Size
S Separation
minimum
0.3
Number of
Pcs/Cassette
W Width
B Bandwidth
T Thickness
L Length
Code
Code
0402
1005
1.0 ± 0.05
1.6 ± 0.07
0.5 ± 0.05
0.8 ± 0.07
0.2 to 0.4
0.2 to 0.5
0.5 ± .05
0.8 ± .07
50,000
0603
1608
0.7
15,000
Table 10 – Capacitor Marking
Laser marking is available as an extra-cost option for most KEMET ceramic chips. Such marking is two sided, and includes a K to
identify KEMET, followed by two characters (per EIA-198) to identify the capacitance value. Note that marking is not available for any
Y5V chip. ln addition, the 0603 marking option is limited to the K only. (Marking Optional – Not Available for 0402 Size)
N u m e r a l
Alpha
Character
Capacitance (pF) For Various Numeral Identifiers
9
0
1
2
3
4
5
6
7
A
B
C
D
E
F
G
H
J
0.1
1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
25
35
40
45
50
60
70
80
90
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
250
350
400
450
500
600
700
800
900
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
2500
3500
4000
4500
5000
6000
7000
8000
9000
10000
11000
12000
13000
15000
16000
18000
20000
22000
24000
27000
30000
33000
36000
39000
43000
47000
51000
56000
62000
68000
75000
82000
91000
25000
35000
40000
45000
50000
60000
70000
80000
90000
100000
110000
120000
130000
150000
160000
180000
200000
220000
240000
270000
300000
330000
360000
390000
430000
470000
510000
560000
620000
680000
750000
820000
910000
250000
350000
400000
450000
500000
600000
700000
800000
900000
1000000
1100000
1200000
1300000
1500000
1600000
1800000
2000000
2200000
2400000
2700000
3000000
3300000
3600000
3900000
4300000
4700000
5100000
5600000
6200000
6800000
7500000
8200000
9100000
2500000
3500000
4000000
4500000
5000000
6000000
7000000
8000000
9000000
10000000
11000000
12000000
13000000
15000000
16000000
18000000
20000000
22000000
24000000
27000000
30000000
33000000
36000000
39000000
43000000
47000000
51000000
56000000
62000000
68000000
75000000
82000000
91000000
25000000
35000000
40000000
45000000
50000000
60000000
70000000
80000000
90000000
0.11
0.12
0.13
0.15
0.16
0.18
0.2
0.22
0.24
0.27
0.3
0.33
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
0.25
0.35
0.4
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
2.5
3.5
4
Example shown is 1,000 pF capacitor
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
0.45
0.5
0.6
0.7
0.8
4.5
5
6
7
8
y
0.9
9
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
Madrid, Spain
Tel: 34-91-804-4303
North America
Southeast Asia
Singapore
Tel: 65-6586-1900
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Dortmund, Germany
Tel: 49-2307-3619672
West Chester, PA
Tel: 610-692-4642
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Schaumburg, IL
Tel: 847-882-3590
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Carmel, IN
Tel: 317-706-6742
Weymouth, United Kingdom
Tel: 44-1305-830747
West
Milpitas, CA
Tel: 408-433-9950
Coatbridge, Scotland
Tel: 44-1236-434455
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
Search Our FAQs: KnowledgeEdge
Product Information
Resource
Products
Location
http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques)
http://www.kemet.com/technicalpapers
RoHS Statement
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Website
Location
www.kemet.com
Contact Us
Investor Relations
Call Us
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand,
email=marcybrand@kemet.com
Date: 2011.08.12 13:44:02 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
19
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明