C066G102F2CG5CS [KEMET]
CERAMIC MOLDED/AXIAL & RADIAL - MIL-PRF-20; 陶瓷模压/推力和径向 - MIL -PRF- 20
| 型号： | C066G102F2CG5CS |
| 厂家： | 
KEMET CORPORATION |
| 描述： | CERAMIC MOLDED/AXIAL & RADIAL - MIL-PRF-20 |
| 文件： | 总23页 (文件大小：1277K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
F-3113 5/06
CERAMIC LEADED CAPACITORS
Ceramic Leaded Capacitors
KEMET Series
Page
Performance Information
1-6
MIL-PRF-20
C052G/C062G/C114G/
C124G/192G/C202G/C222G
7-12
MIL-PRF-39014/01/02/05
MIL-C-11015
C052T/C062T/C114T/
C124T/192T/C202T/C222T
13-18
C052K/C062K/C114K/
C124K/192K/C202K/C222K
13-18
19-21
Ceramic Leaded Packaging
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
ELECTRICAL CHARACTERISTICS
The variation of a capacitor’s impedance with frequency
determines its effectiveness in many applications.
The fundamental electrical properties of multilayer
ceramic capacitors are as follows:
Dissipation Factor: Dissipation Factor (DF) is a mea-
sure of the losses in a capacitor under AC application. It is the
ratio of the equivalent series resistance to the capacitive reac-
tance, and is usually expressed in percent. It is usually mea-
sured simultaneously with capacitance, and under the same
conditions. The vector diagram in Figure 2 illustrates the rela-
tionship between DF, ESR, and impedance. The reciprocal of
the dissipation factor is called the “Q”, or quality factor. For
convenience, the “Q” factor is often used for very low values
of dissipation factor. DF is sometimes called the “loss tangent”
or “tangent ␦”, as derived from this diagram.
Polarity: Multilayer ceramic capacitors are not polar,
and may be used with DC voltage applied in either direction.
Rated Voltage: This term refers to the maximum con-
tinuous DC working voltage permissible across the entire
operating temperature range. Multilayer ceramic capacitors
are not extremely sensitive to voltage, and brief applications
of voltage above rated will not result in immediate failure.
However, reliability will be reduced by exposure to sustained
voltages above rated.
Capacitance: The standard unit of capacitance is the
farad. For practical capacitors, it is usually expressed in
-6
-9
ESR
microfarads (10 farad), nanofarads (10 farad), or picofarads
Figure 2
-12
(10 farad). Standard measurement conditions are as
follows:
O
ESR
DF =
Class I (up to 1,000 pF):
1MHz and 1.2 VRMS
maximum.
X
c
δ
Class I (over 1,000 pF):
1kHz and 1.2 VRMS
maximum.
X
Ζ
c
Class II:
Class III:
1 kHz and 1.0 0.2 VRMS.
1 kHz and 0.5 0.1 VRMS.
1
2πfC
=
X
c
Like all other practical capacitors, multilayer ceramic
capacitors also have resistance and inductance. A simplified
schematic for the equivalent circuit is shown in Figure 1.
Other significant electrical characteristics resulting from
these additional properties are as follows:
Insulation Resistance: Insulation Resistance (IR) is the
DC resistance measured across the terminals of a capacitor,
represented by the parallel resistance (Rp) shown in Figure 1.
For a given dielectric type, electrode area increases with
capacitance, resulting in a decrease in the insulation resis-
tance. Consequently, insulation resistance is usually specified
as the “RC” (IR x C) product, in terms of ohm-farads or
megohm-microfarads. The insulation resistance for a specific
capacitance value is determined by dividing this product by
the capacitance. However, as the nominal capacitance values
become small, the insulation resistance calculated from the
RC product reaches values which are impractical.
Consequently, IR specifications usually include both a mini-
mum RC product and a maximum limit on the IR calculated
from that value. For example, a typical IR specification might
read “1,000 megohm-microfarads or 100 gigohms, whichever
is less.”
R
Figure 1
P
R
L
S
C
C = Capacitance
L = Inductance
R
R
= Equivalent Series Resistance (ESR)
= Insulation Resistance (IR)
S
P
Impedance: Since the parallel resistance (Rp) is nor-
mally very high, the total impedance of the capacitor is:
Insulation Resistance is the measure of a capacitor to
resist the flow of DC leakage current. It is sometimes referred
to as “leakage resistance.” The DC leakage current may be
calculated by dividing the applied voltage by the insulation
resistance (Ohm’s Law).
2
RS + (XC - XL)2
Z =
Dielectric Withstanding Voltage: Dielectric withstand-
ing voltage (DWV) is the peak voltage which a capacitor is
designed to withstand for short periods of time without dam-
age. All KEMET multilayer ceramic capacitors will withstand a
test voltage of 2.5 x the rated voltage for 60 seconds.
Where Z =Total Impedance
RS = Equivalent Series Resistance
1
XC = Capacitive Reactance =
2πfC
KEMET specification limits for these characteristics at
standard measurement conditions are shown on page 2.
Variations in these properties caused by changing conditions
of temperature, voltage, frequency, and time are covered in
the following sections.
XL = Inductive Reactance = 2πfL
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
TABLE 1
EIA TEMPERATURE CHARACTERISTIC CODES
FOR CLASS I DIELECTRICS
EFFECT OF TEMPERATURE
Significant Figure
of Temperature
Coefficient
Multiplier Applied
to Temperature
Coefficient
Tolerance of
Temperature
Coefficient *
0.20
0.10
0.0
+0.2
+0.1
%∆C
PPM per
Degree C
Letter
Symbol
Multi-
plier
Number
Symbol
PPM per
Letter
0
-0.1
-0.2
Degree C
Symbol
%DF
0.0
0.3
0.9
1.0
1.5
2.2
3.3
4.7
7.5
C
B
A
M
P
R
S
T
-1
-10
-100
-1000
-100000
+1
0
1
2
3
4
5
6
7
8
9
3 0
60
G
H
J
K
L
-55 -40 -20
0
+20
+40
+60
+80 +100
+125
120
250
500
1000
2500
Figure 3.
Temperature °C
Capacitance & DF vs Temperature - C0G
M
N
+10
+100
+1000
+10000
U
* These symetrical tolerances apply to a two-point measurement of
temperature coefficient: one at 25ºC and one at 85ºC. Some deviation
is permitted at lower temperatures. For example, the PPM tolerance
for C0G at -55 is +30 / -72 PPM.
+20
+10
0
8.0
6.0
%∆C
4.0
2.0
0.0
-10
-20
TABLE 2
%DF
EIA TEMPERATURE CHARACTERISTIC CODES
FOR CLASS II & III DIELECTRICS
-60
-40 -20
0
+20 +40 +60 +80 +100 +120 +140
Figure 4.
Temperature °C
Low Temperature
Rating
High Temperature Maximum Capacitance
Rating Shift
Capacitance & DF vs Temperature - X7R
Degree
Celcius
Letter
Symbol Celcius
Degree
Number
Symbol
Letter
Symbol
Percent
+10C
-30C
-55C
Z
Y
X
+45C
+65C
+85C
+105C
+125C
+150C
+200C
2
4
5
6
7
8
9
1.0%
1.5%
2.2%
3.3%
4.7%
7.5%
10.0%
15.0%
22.0%
A
B
C
D
E
F
P
R
S
T
+22/-33%
+22/-56%
+22/-82%
U
V
SPECIFIED ELECTRICAL LIMITS
TEMPERATURE CHARACTERISTICS
PARAMETER
C0G
X7R
Dissipation Factor: Measured at following conditions:
C0G - 1 kHz and 1 vrms if capacitance > 1000 pF
1 Mhz and 1 vrms if capacitance ≤ 1000 pF
0.15%
2.5%
X7R - 1 kHz and 1 vrms* or if extended cap range 0.5 vrms
Dielectric Strength: 2.5 times rated DC voltage
Pass Subsequent IR Test
Insulation Resistance (IR): At rated DC voltage,
or whichever of the two is smaller
1,000 MΩ−µF
or 100 GΩ
1,000 MΩ−µF
or 100 GΩ
Temperature Characteristics: Range, °C
Capacitance Change without DC voltage
-55 to +125
0 ± 30 ppm/°C
-55 to +125
±15%
2
* 1 MHz and 1 vrms if capacitance ≤ 100 pF on military product.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
Effect of Frequency: Frequency affects both capaci-
tance and dissipation factor. Typical curves for KEMET multi-
layer ceramic capacitors are shown in Figures 8 and 9.
EFFECT OF APPLIED VOLTAGE
+10
AC
DC
T
he variation of impedance with frequency is an impor-
tant consideration in the application of multilayer ceramic
capacitors. Total impedance of the capacitor is the vector of the
capacitive reactance, the inductive reactance, and the ESR, as
illustrated in Figure 2. As frequency increases, the capacitive
reactance decreases. However, the series inductance (L)
shown in Figure 1 produces inductive reactance, which
increases with frequency. At some frequency, the impedance
ceases to be capacitive and becomes inductive. This point, at
the bottom of the V-shaped impedance versus frequency
curves, is the self-resonant frequency. At the self-resonant fre-
quency, the reactance is zero, and the impedance consists of
the ESR only.
+5
0
-5
-10
4
3
2
1
AC
DC
0.1
10
1
100
Typical impedance versus frequency curves for KEMET
multilayer ceramic capacitors are shown in Figures 10 and 11.
These curves apply to KEMET capacitors in chip form, without
leads. Lead configuration and lead length have a significant
impact on the series inductance. The lead inductance is
approximately 10nH/inch, which is large compared to the
inductance of the chip. The effect of this additional inductance
is a decrease in the self-resonant frequency, and an increase
in impedance in the inductive region above the self-resonant
frequency.
Figure 6.
AC or DC Volts Applied
Typical Effects of 1000 Hz AC and DC Voltage Level on
Capacitance and Dissipation Factor - X7R
Note: C0G Dielectric capacitance and dissipation factor are
stable with voltage.
Effect of Temperature: Both capacitance and dissipa-
tion factor are affected by variations in temperature. The max-
imum capacitance change with temperature is defined by the
temperature characteristic. However, this only defines a “box”
bounded by the upper and lower operating temperatures and
the minimum and maximum capacitance values. Within this
“box”, the variation with temperature depends upon the spe-
cific dielectric formulation. Typical curves for KEMET capaci-
tors are shown in Figures 3 and 4. These figures also include
the typical change in dissipation factor for KEMET capacitors.
Effect of Time: The capacitance of Class II and III
dielectrics change with time as well as with temperature, volt-
age and frequency. This change with time is known as “aging.”
It is caused by gradual realignment of the crystalline structure
of the ceramic dielectric material as it is cooled below its Curie
temperature, which produces a loss of capacitance with time.
The aging process is predictable and follows a logarithmic
decay. Typical aging rates for C0G and X7R dielectrics are as
follows:
Insulation resistance decreases with temperature.
Typically, the insulation resistance at maximum rated temper-
ature is 10% of the 25ºC value.
C0G
X7R
None
Effect of Voltage: Class I ceramic capacitors are not
affected by variations in applied AC or DC voltages. For Class
II and III ceramic capacitors, variations in voltage affect only
the capacitance and dissipation factor. The application of DC
voltage higher than 5 vdc reduces both the capacitance and
dissipation factor. The application of AC voltages up to 10-20
Vac tends to increase both capacitance and dissipation factor
At higher AC voltages, both capacitance and dissipation factor
begin to decrease.
2.0% per decade of time
Typical aging curves for X7R dielectrics is shown in
Figure 12.
The aging process is reversible. If the capacitor is heat-
ed to a temperature above its Curie point for some period of
time, de-aging will occur and the capacitor will regain the
capacitance lost during the aging process. The amount of de-
aging depends on both the elevated temperature and the
length of time at that temperature. Exposure to 150ºC for one-
half hour or 125ºC for two hours is usually sufficient to return
the capacitor to its initial value.
Typical curves showing the effect of applied AC and DC
voltage are shown in Figure 6 for KEMET X7R capacitors.
Because the capacitance changes rapidly immediately
after de-aging, capacitance measurements are usually delayed
for at least 10 hours after the de-aging process, which is often
referred to as the “last heat.” In addition, manufacturers utilize
3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
The data necessary to make this calculation is included in
Engineering Bulletin F-2013. However, the following criteria
must be observed:
the aging rates to set factory test limits which will bring the
capacitance within the specified tolerance at some future time,
to allow for customer receipt and use. Typically, the test limits
are adjusted so that the capacitance will be within the specified
tolerance after either 1,000 hours or 100 days, depending on
the manufacturer and the product type.
1. The temperature rise due to power dissipation
should be limited to 20ºC.
2. The peak AC voltage plus the DC voltage must not
exceed the maximum working voltage of the
capacitor.
POWER DISSIPATION
Provided that these criteria are met, multilayer ceramic
capacitors may be operated with AC voltage applied without
need for DC bias.
Power dissipation has been empirically determined for
two representative KEMET series: C052 and C062. Power dis-
sipation capability for various mounting configurations is shown
in Table 3. This table was extracted from Engineering Bulletin
F-2013, which provides a more detailed treatment of this sub-
ject.
Note that no significant difference was detected between
the two sizes in spite of a 2 to 1 surface area ratio. Due to the
materials used in the construction of multilayer ceramic capac-
itors, the power dissipation capability does not depend greatly
on the surface area of the capacitor body, but rather on how
well heat is conducted out of the capacitor lead wires.
Consequently, this power dissipation capability is applicable to
other leaded multilayer styles and sizes.
RELIABILITY
A well constructed multilayer ceramic capacitor is
extremely reliable and, for all practical purposes, has an infi-
nite life span when used within the maximum voltage and
temperature ratings. Capacitor failure may be induced by sus-
tained operation at voltages that exceed the rated DC voltage,
voltage spikes or transients that exceed the dielectric with-
standing voltage, sustained operation at temperatures above
the maximum rated temperature, or the excessive tempera-
ture rise due to power dissipation.
Failure rate is usually expressed in terms of percent per
1,000 hours or in FITS (failure per billion hours). Some
KEMET series are qualified under U.S. military established
reliability specifications MIL-PRF-20, MIL-PRF-123, MIL-
PRF-39014, and MIL-PRF-55681. Failure rates as low as
0.001% per 1,000 hours are available for all capacitance /
voltage ratings covered by these specifications. These spec-
ifications and accompanying Qualified Products List should
be consulted for details.
TABLE 3
POWER DISSIPATION CAPABILITY
(Rise in Celsius degrees per Watt)
Power
Dissipation
of C052 & C062
Mounting Configuration
1.00" leadwires attached to binding post
of GR-1615 bridge (excellent heat sink)
90 Celsius degrees
rise per Watt 10%
For series not covered by these military specifications,
an internal testing program is maintained by KEMET Quality
Assurance. Samples from each week’s production are sub-
jected to a 2,000 hour accelerated life test at 2 x rated voltage
and maximum rated temperature. Based on the results of
these tests, the average failure rate for all non-military series
covered by this test program is currently 0.06% per 1,000
hours at maximum rated conditions. The failure rate would be
much lower at typical use conditions. For example, using MIL-
HDBK-217D this failure rate translates to 0.9 FITS at 50%
rated voltage and 50ºC.
0.25" leadwires attached to binding post
of GR-1615 bridge
55 Celsius degrees
rise per Watt 10%
Capacitor mounted flush to 0.062" glass-
epoxy circuit board with small copper traces
77 Celsius degrees
rise per Watt 10%
Capacitor mounted flush to 0.062" glass-
epoxy circuit board with four square inches
of copper land area as a heat sink
53 Celsius degrees
rise per Watt 10%
As shown in Table 3, the power dissipation capability of
the capacitor is very sensitive to the details of its use environ-
ment. The temperature rise due to power dissipation should not
exceed 20ºC. Using that constraint, the maximum permissible
power dissipation may be calculated from the data provided in
Table 3.
It is often convenient to translate power dissipation capa-
bility into a permissible AC voltage rating. Assuming a sinu-
soidal wave form, the RMS “ripple voltage” may be calculated
from the following formula:
Current failure rate details for specific KEMET multilay-
er ceramic capacitor series are available on request.
MISAPPLICATION
Ceramic capacitors, like any other capacitors, may fail
if they are misapplied. Typical misapplications include expo-
sure to excessive voltage, current or temperature. If the
dielectric layer of the capacitor is damaged by misapplication
the electrical energy of the circuit can be released as heat,
which may damage the circuit board and other components
as well.
If potential for misapplication exists, it is recommended
that precautions be taken to protect personnel and equipment
during initial application of voltage. Commonly used precau-
tions include shielding of personnel and sensing for excessive
power drain during board testing.
PMAX
E = Z x
R
Where E = RMS Ripple Voltage (volts)
P = Power Dissipation (watts)
Z = Impedence
R = ESR
4
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
Figure 12
5
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
Insulation Resistance:
GENERAL
C0G – 10K megohms or 100 megohm - µF, whichever
Working Voltage:
is less
C0G – 50, 100 & 200 Volts
X7R – 50, 100 & 200 Volts
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Temperature Characteristics:
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
C0G – 0 30 PPM/ºC from -55ºC to +125ºC
X7R – 15% from -55ºC to +125ºC
Capacitance Tolerance:
C0G – 0.5 pF, 1%, 2%, 5%, 10%, 20%
( 0.5 pF is tightest available tolerance)
X7R – 10%, 20%, -0 +100%, -20% +80%
ENVIRONMENTAL
Moisture Resistance:
MIL-STD-202, Method 106, or EIA-198, Method 204,
Condition A, except 20 cycles.
Construction:
Monolithic block of ceramic dielectric with interdigitated
internal electrodes, encapsulated in a molded case, and
having axial or radial leads. Meets flame test requirements
of UL Standard 94V-0.
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Terminal Strength:
EIA-198 Method 303 Condition A (2.2 kg)
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
ELECTRICAL
Capacitance:
Immersion Cycling:
Within specified tolerance when measured with 1 volt rms
at 1 kHz (1000 pF or less at 1 MHz for C0G).
MIL-STD-202, Method 104, Condition B. Post-Test limits
at 25°C are:
Dissipation Factor:
Insulation Resistance:
25ºC at 1 kHz (1000 pF or less at 1 MHz for C0G).
C0G – .15% maximum
X7R – 2.5% maximum
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Insulation Resistance:
After 2 minutes electrification at 25ºC and rated voltage
C0G – 100K megohms or 1000 megohm - µF, whichever
Solderability:
MIL-STD-202, Method 208, Sn62 solder, 245ºC for 5 1/2
seconds.
is less.
X7R – 100K megohms or 1000 megohm - µF, whichever
is less.
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Condition B (260ºC, 10 secs).
Depth of immersion — to a minimum of .050" from the
capacitor body.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited
to 50 mA at 25ºC.
Lead Material:
Axial: Solder-coated copper clad steel
Radial: Solder-coated copper
Life Test:
2000 hours at 200% of rated voltage at 125ºC. Post-Test
limits at 25ºC are:
Capacitance Change:
C0G – less than 3% or 0.25 pF, whichever is higher
X7R – 20% of initial value
Dissipation Factor:
C0G – .25% maximum
X7R – 3.0% maximum
6
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL & RADIAL - MIL-PRF-20
CAPACITOR OUTLINE DRAWINGS (AXIAL LEADS)
1.50 Min.
(38.10)
L
1.50 Min.
(38.10)
D
C
DIMENSIONS — INCHES & (MILLIMETERS)
CASE
SIZE
MILITARY
EQUIVALENT STYLES
L
D
C
C114
C124
C192
C202
C222
CC75, CCR75
CC76, CCR76
CC77, CCR77
CC78, CCR78
CC79, CCR79
.160 .010 (4.06 .25)
.250 .010 (6.35 .25)
.390 .010 (9.91 .25)
.500 .020 (12.70 .51)
.690 .030 (17.53 .76)
.090 .010 (2.29 .25)
.090 .010 (2.29 .25)
.140 .010 (3.56 .25)
.250 .015 (6.35 .38)
.350 .020 (8.89 .51)
.020, +.000, -.003 (.51, +.00, -.08)
.020, +.000, -.003 (.51, +.00, -.08)
.025, +.002, -.002 (.64, +.05, -.05)
.025, +.002, -.002 (.64, +.05, -.05)
.025, +.002, -.002 (.64, +.05, -.05)
CAPACITOR OUTLINE DRAWINGS (RADIAL LEADS)
C062 (CC06, CCR06), C512 (CC07, CCR07),
C052 (CC05, CCR05)
C056 (CCR05)
L
C522 (CC08, CCR08)
C066 (CCR06)
L W
L
L
W
W
W
.026
MIN.
H
H
H
.026
MIN.
Lead Dia.
.025
(+.004
-.002)
.045
MAX.
Lead Dia.
.025
(+.004
-.002)
1.25
MIN.
1.25
MIN.
Lead Dia.
.025
(+.004
Lead Dia.
.025
(+.004
-.002)
1.25
MIN.
1.25
MIN.
-.002)
S
S
S
S
Center Line of leads within .030" of Center Line of case.
* Leads are .625 minimum when tape and reel packaged
DIMENSIONS — INCHES & (MILLIMETERS)
MILITARY
EQUIVALENT
STYLES
S
CASE
SIZE
H
L
W
WIDTH
LEAD
HEIGHT
LENGTH
SPACING
C052/
C056
CC05, CCR05
.190 .010 (4.83 .25)
.190 .010 (4.83 .25)
.090 .010 (2.29 .25)
.200 .015 (5.08 .38)
C062/
C066
CC06, CCR06
.290 .010 (7.37 .25)
.290 .010 (7.37 .25)
.090 .010 (2.29 . 25)
.200 .015 (5.08 .38)
C512
C522
CC07, CCR07
CC08, CCR08
.480 .020 (12.19 .51)
.480 .020 (12.19 .51)
.480 .020 (12.19 .51)
.480 .020 (12.19 .51)
.140 . 010 (3.56 .25)*
.240 .010 (6.10 .25)
.400 .020 (10.16 .51)
.400 .020 (10.16 .51)
* 0.200 (5.08) maximum for 100,000 pF only.
7
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL & RADIAL - MIL-PRF-20
ORDERING INFORMATION
**
C
R
C 052 G 102
J
G 5
1
CERAMIC
FAILURE RATE
A — Not Applicable (Std.)
M — 1.0%
*CASE SIZE
(See Table Below)
P — 0.1%
R — 0.01%
S — 0.001%
SPECIFICATION
Military
G — MIL-PRF-20
LEAD MATERIAL
CAPACITANCE
C — Standard
In picofarad code: First two digits are significant
figures and third is number of zeroes following
(except 9 indicates division by 10). Examples:
0.1 F = 100,000 pF = 104 and 9.1 pF = 919.
See tables for Standard Values.
INTERNAL CONSTRUCTION
5 — Standard
CAPACITANCE TOLERANCE
Standard
K — 10%
J — 5%
Others
C — 0.25 pF
D — 0.5 pF
WORKING
G — 2%
VOLTAGE
1 — 100
2 — 200
5 — 50
F — 1%
TEMPERATURE CHARACTERISTIC
B — 0.1 pF
Capacitance Change WithTemp.
Measured Measured
Without
DC Bias
Voltage
With Bias
(Rated
KEMET
Military
EIA
Temp.
Standard tolerances for each Series are
shown in the repetitive parts lists.
Designator Equivalent Equivalent Range, °C
Voltage)
G
*CG
C0G
-55 to
+125
30
30
*CASE SIZES
(Ultra
Stable)
(See below)
(NPO)
ppm/°C*
ppm/°C*
RADIAL
C052
C056
C062
C066
C512
C522
AXIAL
C114
C124
C192
C202
C222
*CH— 60 ppm/°C 8.2 pF-18.0 pF.
*CJ — 120 ppm/°C 4.3 pF-7.5 pF.
*CK — 250 ppm/°C 2.2 pF-3.9 pF
*CX — not measurable 0.1 pF-2.0 pF.
**Part Number Example: C052G102J1G5CR (14 digits – no spaces)
CAPACITOR MARKING
CC(R) 75, 76
CC(R) 05
FRONT
JCK
2R2
CM5
“J” Brand (CCR only), Temperature Characteristic
Capacitance
Capacitance Tolerance, Failure Rate (CCR only),
Year Code
CCR0
5CH1
00FR
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
** For the standoff style, a “V” is added after the
failure rate, or last character.
11AK
REAR
Lot Code, Trademark (K)
0504
AJ3
1433
Date Code
Lot Code, “J” Brand (CCR only),
FSCM (Federal Source Code)
CC(R) 77
CCR77C
G102JM
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
“J” Brand (CCR only), FSCM (Federal Source Code)
CC(R) 06
J31433
FRONT
CCR06
CG102
JS
0504A
Date/Lot Code
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
** For the standoff style, a “V” is added after the
failure rate, or last character.
CC(R) 78
REAR
CCR78CG
103FR
JAN K
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
“JAN” Brand (CCR only), Trademark (K)
FSCM (Federal Source Code)
Voltage
0504A
J100V
31433
Date/LotCode
“J” Brand (CCR only), Voltage
FSCM (Federal Source Code)
31433
100V
Date/Lot Code
CC(R) 07
0504A
CCR07CG
472KM
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
“JAN” Brand, Trademark
FSCM (Federal Source Code)
Voltage, Date/Lot Code
CC(R) 79
JAN KEMET
CCR79CG
103KM
JAN K
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
“JAN” Brand (CCR only), Trademark
31433
200V 0504A
31433
200V
FSCM (Federal Source Code)
Voltage
CC(R) 08
Date/Lot Code
0504A
CCR08CG
472KM
JAN KEMET
Military Designation (Type, Temperature Characteristic,
Capacitance, Tolerance, Failure Rate)
“JAN” Brand, Trademark
31433
FSCM (Federal Source Code)
Voltage, Date/Lot Code
200V 0509A
8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC - CG (EIA-C0G)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
200 VOLT — C114 (CC(R)75 PER MIL-PRF-20/27)
100 VOLT — C114 (CC(R)75 PER MIL-PRF-20/27)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
C114G109(2)2G5C(1) CC75CX1R0(2) CCR75CX1R0(2)(1)
C114G119(2)2G5C(1) CC75CX1R1(2) CCR75CX1R1(2)(1)
C114G129(2)2G5C(1) CC75CX1R2(2) CCR75CX1R2(2)(1)
C114G139(2)2G5C(1) CC75CX1R3(2) CCR75CX1R3(2)(1)
C114G159(2)2G5C(1) CC75CX1R5(2) CCR75CX1R5(2)(1)
C114G169(2)2G5C(1) CC75CX1R6(2) CCR75CX1R6(2)(1)
C114G189(2)2G5C(1) CC75CX1R8(2) CCR75CX1R8(2)(1)
C114G209(2)2G5C(1) CC75CX2R0(2) CCR75CX2R0(2)(1)
C114G229(2)2G5C(1) CC75CK2R2(2) CCR75CK2R2(2)(1)
C114G249(2)2G5C(1) CC75CK2R4(2) CCR75CK2R4(2)(1)
C114G279(3)2G5C(1) CC75CK2R7(3) CCR75CK2R7(3)(1)
C114G309(3)2G5C(1) CC75CK3R0(3) CCR75CK3R0(3)(1)
C114G339(3)2G5C(1) CC75CK3R3(3) CCR75CK3R3(3)(1)
C114G369(3)2G5C(1) CC75CK3R6(3) CCR75CK3R6(3)(1)
C114G399(3)2G5C(1) CC75CK3R9(3) CCR75CK3R9(3)(1)
C114G439(3)2G5C(1) CC75CJ4R3(3) CCR75CJ4R3(3)(1)
C114G479(3)2G5C(1) CC75CJ4R7(3) CCR75CJ4R7(3)(1)
C114G519(3)2G5C(1) CC75CJ5R1(3) CCR75CJ5R1(3)(1)
C114G569(3)2G5C(1) CC75CJ5R6(3) CCR75CJ5R6(3)(1)
C114G629(3)2G5C(1) CC75CJ6R2(3) CCR75CJ6R2(3)(1)
C114G689(3)2G5C(1) CC75CJ6R8(3) CCR75CJ6R8(3)(1)
C114G759(3)2G5C(1) CC75CJ7R5(3) CCR75CJ7R5(3)(1)
C114G829(3)2G5C(1) CC75CH8R2(3) CCR75CH8R2(3)(1)
C114G919(3)2G5C(1) CC75CH9R1(3) CCR75CH9R1(3)(1)
C114G100(4)2G5C(1) CC75CH100(4) CCR75CH100(4)(1)
C114G110(4)2G5C(1) CC75CH110(4) CCR75CH110(4)(1)
C114G120(4)2G5C(1) CC75CH120(4) CCR75CH120(4)(1)
C114G130(4)2G5C(1) CC75CH130(4) CCR75CH130(4)(1)
C114G150(4)2G5C(1) CC75CH150(4) CCR75CH150(4)(1)
C114G160(4)2G5C(1) CC75CH160(4) CCR75CH160(4)(1)
C114G180(4)2G5C(1) CC75CH180(4) CCR75CH180(4)(1)
C114G200(4)2G5C(1) CC75CG200(4) CCR75CG200(4)(1)
C114G220(4)2G5C(1) CC75CG220(4) CCR75CG220(4)(1)
C114G240(4)2G5C(1) CC75CG240(4) CCR75CG240(4)(1)
C114G270(4)2G5C(1) CC75CG270(4) CCR75CG270(4)(1)
C114G300(4)2G5C(1) CC75CG300(4) CCR75CG300(4)(1)
C114G330(4)2G5C(1) CC75CG330(4) CCR75CG330(4)(1)
C114G360(4)2G5C(1) CC75CG360(4) CCR75CG360(4)(1)
C114G390(4)2G5C(1) CC75CG390(4) CCR75CG390(4)(1)
C114G430(4)2G5C(1) CC75CG430(4) CCR75CG430(4)(1)
C114G470(4)2G5C(1) CC75CG470(4) CCR75CG470(4)(1)
C114G510(4)2G5C(1) CC75CG510(4) CCR75CG510(4)(1)
C114G560(4)2G5C(1) CC75CG560(4) CCR75CG560(4)(1)
C114G620(4)2G5C(1) CC75CG620(4) CCR75CG620(4)(1)
C114G680(4)2G5C(1) CC75CG680(4) CCR75CG680(4)(1)
C114G750(4)2G5C(1) CC75CG750(4) CCR75CG750(4)(1)
82.0 C114G820(4)1G5C(1) CC75CG820(4) CCR75CG820(4)(1)
91.0 C114G910(4)1G5C(1) CC75CG910(4) CCR75CG910(4)(1)
100.0 C114G101(4)1G5C(1) CC75CG101(4) CCR75CG101(4)(1)
110.0 C114G111(4)1G5C(1) CC75CG111(4) CCR75CG111(4)(1)
120.0 C114G121(4)1G5C(1) CC75CG121(4) CCR75CG121(4)(1)
130.0 C114G131(4)1G5C(1) CC75CG131(4) CCR75CG131(4)(1)
150.0 C114G151(4)1G5C(1) CC75CG151(4) CCR75CG151(4)(1)
160.0 C114G161(4)1G5C(1) CC75CG161(4) CCR75CG161(4)(1)
180.0 C114G181(4)1G5C(1) CC75CG181(4) CCR75CG181(4)(1)
200.0 C114G201(4)1G5C(1) CC75CG201(4) CCR75CG201(4)(1)
220.0 C114G221(4)1G5C(1) CC75CG221(4) CCR75CG221(4)(1)
240.0 C114G241(4)1G5C(1) CC75CG241(4) CCR75CG241(4)(1)
50 VOLT — C114 (CC(R)75 PER MIL-PRF-20/27)
270.0 C114G271(4)5G5C(1) CC75CG271(4) CCR75CG271(4)(1)
300.0 C114G301(4)5G5C(1) CC75CG301(4) CCR75CG301(4)(1)
330.0 C114G331(4)5G5C(1) CC75CG331(4) CCR75CG331(4)(1)
360.0 C114G361(4)5G5C(1) CC75CG361(4) CCR75CG361(4)(1)
390.0 C114G391(4)5G5C(1) CC75CG391(4) CCR75CG391(4)(1)
430.0 C114G431(4)5G5C(1) CC75CG431(4) CCR75CG431(4)(1)
470.0 C114G471(4)5G5C(1) CC75CG471(4) CCR75CG471(4)(1)
510.0 C114G511(4)5G5C(1) CC75CG511(4) CCR75CG511(4)(1)
560.0 C114G561(4)5G5C(1) CC75CG561(4) CCR75CG561(4)(1)
620.0 C114G621(4)5G5C(1) CC75CG621(4) CCR75CG621(4)(1)
680.0 C114G681(4)5G5C(1) CC75CG681(4) CCR75CG681(4)(1)
200 VOLT — C124 (CC(R)76 PER MIL-PRF-20/28)
82.0 C124G820(4)2G5C(1) CC76CG820(4) CCR76CG820(4)(1)
91.0 C124G910(4)2G5C(1) CC76CG910(4) CCR76CG910(4)(1)
100.0 C124G101(4)2G5C(1) CC76CG101(4) CCR76CG101(4)(1)
110.0 C124G111(4)2G5C(1) CC76CG111(4) CCR76CG111(4)(1)
120.0 C124G121(4)2G5C(1) CC76CG121(4) CCR76CG121(4)(1)
130.0 C124G131(4)2G5C(1) CC76CG131(4) CCR76CG131(4)(1)
100 VOLT — C124 (CC(R)76 PER MIL-PRF-20/28)
270.0 C124G271(4)1G5C(1) CC76CG271(4) CCR76CG271(4)(1)
300.0 C124G301(4)1G5C(1) CC76CG301(4) CCR76CG301(4)(1)
330.0 C124G331(4)1G5C(1) CC76CG331(4) CCR76CG331(4)(1)
360.0 C124G361(4)1G5C(1) CC76CG361(4) CCR76CG361(4)(1)
390.0 C124G391(4)1G5C(1) CC76CG391(4) CCR76CG391(4)(1)
430.0 C124G431(4)1G5C(1) CC76CG431(4) CCR76CG431(4)(1)
470.0 C124G471(4)1G5C(1) CC76CG471(4) CCR76CG471(4)(1)
510.0 C124G511(4)1G5C(1) CC76CG511(4) CCR76CG511(4)(1)
560.0 C124G561(4)1G5C(1) CC76CG561(4) CCR76CG561(4)(1)
620.0 C124G621(4)1G5C(1) CC76CG621(4) CCR76CG621(4)(1)
680.0 C124G681(4)1G5C(1) CC76CG681(4) CCR76CG681(4)(1)
50 VOLT — C124 (CC(R)76 PER MIL-PRF-20/28)
750.0 C124G751(4)5G5C(1) CC76CG751(4) CCR76CG751(4)(1)
820.0 C124G821(4)5G5C(1) CC76CG821(4) CCR76CG821(4)(1)
910.0 C124G911(4)5G5C(1) CC76CG911(4) CCR76CG911(4)(1)
1,000.0 C124G102(4)5G5C(1) CC76CG102(4) CCR76CG102(4)(1)
To complete Part Number, insert the following letters:
(1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only).
(2) Available Capacitance Tolerances: B, C.
(3) Available Capacitance Tolerances: B, C, D.
(4) Available Capacitance Tolerances: F, G, J.
200 VOLT — C192 (CC(R)77 PER MIL-PRF-20/29)
150.0 C192G151(4)2G5C(1) CC77CG151(4) CCR77CG151(4)(1)
160.0 C192G161(4)2G5C(1) CC77CG161(4) CCR77CG161(4)(1)
180.0 C192G181(4)2G5C(1) CC77CG181(4) CCR77CG181(4)(1)
200.0 C192G201(4)2G5C(1) CC77CG201(4) CCR77CG201(4)(1)
220.0 C192G221(4)2G5C(1) CC77CG221(4) CCR77CG221(4)(1)
240.0 C192G241(4)2G5C(1) CC77CG241(4) CCR77CG241(4)(1)
270.0 C192G271(4)2G5C(1) CC77CG271(4) CCR77CG271(4)(1)
300.0 C192G301(4)2G5C(1) CC77CG301(4) CCR77CG301(4)(1)
330.0 C192G331(4)2G5C(1) CC77CG331(4) CCR77CG331(4)(1)
360.0 C192G361(4)2G5C(1) CC77CG361(4) CCR77CG361(4)(1)
390.0 C192G391(4)2G5C(1) CC77CG391(4) CCR77CG391(4)(1)
430.0 C192G431(4)2G5C(1) CC77CG431(4) CCR77CG431(4)(1)
470.0 C192G471(4)2G5C(1) CC77CG471(4) CCR77CG471(4)(1)
510.0 C192G511(4)2G5C(1) CC77CG511(4) CCR77CG511(4)(1)
560.0 C192G561(4)2G5C(1) CC77CG561(4) CCR77CG561(4)(1)
620.0 C192G621(4)2G5C(1) CC77CG621(4) CCR77CG621(4)(1)
680.0 C192G681(4)2G5C(1) CC77CG681(4) CCR77CG681(4)(1)
9
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC - CG (EIA-C0G)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
100 VOLT — C192 (CC(R)77 PER MIL-PRF-20/29)
100 VOLT — C202 (CC(R)78 PER MIL-PRF-20/30)
750.0 C192G751(4)1G5C(1) CC77CG751(4) CCR77CG751(4)(1)
820.0 C192G821(4)1G5C(1) CC77CG821(4) CCR77CG821(4)(1)
910.0 C192G911(4)1G5C(1) CC77CG911(4) CCR77CG911(4)(1)
1,000.0 C192G102(4)1G5C(1) CC77CG102(4) CCR77CG102(4)(1)
1,100.0 C192G112(4)1G5C(1) CC77CG112(4) CCR77CG112(4)(1)
1,200.0 C192G122(4)1G5C(1) CC77CG122(4) CCR77CG122(4)(1)
1,300.0 C192G132(4)1G5C(1) CC77CG132(4) CCR77CG132(4)(1)
1,500.0 C192G152(4)1G5C(1) CC77CG152(4) CCR77CG152(4)(1)
1,600.0 C192G162(4)1G5C(1) CC77CG162(4) CCR77CG162(4)(1)
1,800.0 C192G182(4)1G5C(1) CC77CG182(4) CCR77CG182(4)(1)
2,000.0 C192G202(4)1G5C(1) CC77CG202(4) CCR77CG202(4)(1)
2,200.0 C192G222(4)1G5C(1) CC77CG222(4) CCR77CG222(4)(1)
3,900.0 C202G392(5)1G5C(1) CC78CG392(5) CCR78CG392(5)(1)
4,700.0 C202G472(5)1G5C(1) CC78CG472(5) CCR78CG472(5)(1)
5,600.0 C202G562(5)1G5C(1) CC78CG562(5) CCR78CG562(5)(1)
6,800.0 C202G682(5)1G5C(1) CC78CG682(5) CCR78CG682(5)(1)
8,200.0 C202G822(5)1G5C(1) CC78CG822(5) CCR78CG822(5)(1)
10,000.0 C202G103(5)1G5C(1) CC78CG103(5) CCR78CG103(5)(1)
12,000.0 C202G123(5)1G5C(1) CC78CG123(5) CCR78CG123(5)(1)
50 VOLT — C202 (CC(R)78 PER MIL-PRF-20/30)
15,000.0 C202G153(5)5G5C(1) CC78CG153(5) CCR78CG153(5)(1)
18,000.0 C202G183(5)5G5C(1) CC78CG183(5) CCR78CG183(5)(1)
22,000.0 C202G223(5)5G5C(1) CC78CG223(5) CCR78CG223(5)(1)
27,000.0 C202G273(5)5G5C(1) CC78CG273(5) CCR78CG273(5)(1)
50 VOLT — C192 (CC(R)77 PER MIL-PRF-20/29)
200 VOLT — C222 (CC(R)79 PER MIL-PRF-20/31)
3,900.0 C222G392(5)2G5C(1) CC79CG392(5) CCR79CG392(5)(1)
4,700.0 C222G472(5)2G5C(1) CC79CG472(5) CCR79CG472(5)(1)
5,600.0 C222G562(5)2G5C(1) CC79CG562(5) CCR79CG562(5)(1)
6,800.0 C222G682(5)2G5C(1) CC79CG682(5) CCR79CG682(5)(1)
8,200.0 C222G822(5)2G5C(1) CC79CG822(5) CCR79CG822(5)(1)
10,000.0 C222G103(5)2G5C(1) CC79CG103(5) CCR79CG103(5)(1)
2,400.0 C192G242(4)5G5C(1) CC77CG242(4) CCR77CG242(4)(1)
2,700.0 C192G272(4)5G5C(1) CC77CG272(4) CCR77CG272(4)(1)
3,000.0 C192G302(4)5G5C(1) CC77CG302(4) CCR77CG302(4)(1)
3,300.0 C192G332(4)5G5C(1) CC77CG332(4) CCR77CG332(4)(1)
3,600.0 C192G362(4)5G5C(1) CC77CG362(4) CCR77CG362(4)(1)
3,900.0 C192G392(4)5G5C(1) CC77CG392(4) CCR77CG392(4)(1)
4,300.0 C192G432(4)5G5C(1) CC77CG432(4) CCR77CG432(4)(1)
4,700.0 C192G472(4)5G5C(1) CC77CG472(4) CCR77CG472(4)(1)
5,100.0 C192G512(5)5G5C(1) CC77CG512(5) CCR77CG512(5)(1)
5,600.0 C192G562(5)5G5C(1) CC77CG562(5) CCR77CG562(5)(1)
100 VOLT — C222 (CC(R)79 PER MIL-PRF-20/31)
15,000.0 C222G153(5)1G5C(1) CC79CG153(5) CCR79CG153(5)(1)
18,000.0 C222G183(5)1G5C(1) CC79CG183(5) CCR79CG183(5)(1)
22,000.0 C222G223(5)1G5C(1) CC79CG223(5) CCR79CG223(5)(1)
27,000.0 C222G273(5)1G5C(1) CC79CG273(5) CCR79CG273(5)(1)
33,000.0 C222G333(5)1G5C(1) CC79CG333(5) CCR79CG333(5)(1)
39,000.0 C222G393(5)1G5C(1) CC79CG393(5) CCR79CG393(5)(1)
200 VOLT — C202 (CC(R)78 PER MIL-PRF-20/30)
820.0 C202G821(5)2G5C(1) CC78CG821(5) CCR78CG821(5)(1)
1,000.0 C202G102(5)2G5C(1) CC78CG102(5) CCR78CG102(5)(1)
1,200.0 C202G122(5)2G5C(1) CC78CG122(5) CCR78CG122(5)(1)
1,500.0 C202G152(5)2G5C(1) CC78CG152(5) CCR78CG152(5)(1)
1,800.0 C202G182(5)2G5C(1) CC78CG182(5) CCR78CG182(5)(1)
2,200.0 C202G222(5)2G5C(1) CC78CG222(5) CCR78CG222(5)(1)
2,700.0 C202G272(5)2G5C(1) CC78CG272(5) CCR78CG272(5)(1)
3,300.0 C202G332(5)2G5C(1) CC78CG332(5) CCR78CG332(5)(1)
50 VOLT — C222 (CC(R)79 PER MIL-PRF-20/31)
47,000.0 C222G473(5)5G5C(1) CC79CG473(5) CCR79CG473(5)(1)
56,000.0 C222G563(5)5G5C(1) CC79CG563(5) CCR79CG563(5)(1)
68,000.0 C222G683(5)5G5C(1) CC79CG683(5) CCR79CG683(5)(1)
82,000.0 C222G823(5)5G5C(1) CC79CG823(5) CCR79CG823(5)(1)
To complete Part Number, insert the following letters:
(1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only).
(2) Available Capacitance Tolerances: B, C.
(3) Available Capacitance Tolerances: B, C, D.
(4) Available Capacitance Tolerances: F, G, J.
(5) Available Capacitance Tolerances: F, G, J, K.
10
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC - CG (EIA-C0G)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
200 VOLT — C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35)
200 VOLT — C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
C05(6)G109(2)2G5C(1) CC05CX1R0(2) CCR05CX1R0(2)(1)(7)
C05(6)G119(2)2G5C(1) CC05CX1R1(2) CCR05CX1R1(2)(1)(7)
C05(6)G129(2)2G5C(1) CC05CX1R2(2) CCR05CX1R2(2)(1)(7)
C05(6)G139(2)2G5C(1) CC05CX1R3(2) CCR05CX1R3(2)(1)(7)
C05(6)G159(2)2G5C(1) CC05CX1R5(2) CCR05CX1R5(2)(1)(7)
C05(6)G169(2)2G5C(1) CC05CX1R6(2) CCR05CX1R6(2)(1)(7)
C05(6)G189(2)2G5C(1) CC05CX1R8(2) CCR05CX1R8(2)(1)(7)
C05(6)G209(2)2G5C(1) CC05CX2R0(2) CCR05CX2R0(2)(1)(7)
C05(6)G229(2)2G5C(1) CC05CK2R2(2) CCR05CK2R2(2)(1)(7)
C05(6)G249(2)2G5C(1) CC05CK2R4(2) CCR05CK2R4(2)(1)(7)
C05(6)G279(3)2G5C(1) CC05CK2R7(3) CCR05CK2R7(3)(1)(7)
C05(6)G309(3)2G5C(1) CC05CK3R0(3) CCR05CK3R0(3)(1)(7)
C05(6)G339(3)2G5C(1) CC05CK3R3(3) CCR05CK3R3(3)(1)(7)
C05(6)G369(3)2G5C(1) CC05CK3R6(3) CCR05CK3R6(3)(1)(7)
C05(6)G399(3)2G5C(1) CC05CK3R9(3) CCR05CK3R9(3)(1)(7)
C05(6)G439(3)2G5C(1) CC05CJ4R3(3) CCR05CJ4R3(3)(1)(7)
C05(6)G479(3)2G5C(1) CC05CJ4R7(3) CCR05CJ4R7(3)(1)(7)
C05(6)G519(3)2G5C(1) CC05CJ5R1(3) CCR05CJ5R1(3)(1)(7)
C05(6)G569(3)2G5C(1) CC05CJ5R6(3) CCR05CJ5R6(3)(1)(7)
C05(6)G629(3)2G5C(1) CC05CJ6R2(3) CCR05CJ6R2(3)(1)(7)
C05(6)G689(3)2G5C(1) CC05CJ6R8(3) CCR05CJ6R8(3)(1)(7)
C05(6)G759(3)2G5C(1) CC05CJ7R5(3) CCR05CJ7R5(3)(1)(7)
C05(6)G829(3)2G5C(1) CC05CH8R2(3) CCR05CH8R2(3)(1)(7)
C05(6)G919(3)2G5C(1) CC05CH9R1(3) CCR05CH9R1(3)(1)(7)
C05(6)G100(4)2G5C(1) CC05CH100(4) CCR05CH100(4)(1)(7)
C05(6)G110(4)2G5C(1) CC05CH110(4) CCR05CH110(4)(1)(7)
C05(6)G120(4)2G5C(1) CC05CH120(4) CCR05CH120(4)(1)(7)
C05(6)G130(4)2G5C(1) CC05CH130(4) CCR05CH130(4)(1)(7)
C05(6)G150(4)2G5C(1) CC05CH150(4) CCR05CH150(4)(1)(7)
C05(6)G160(4)2G5C(1) CC05CH160(4) CCR05CH160(4)(1)(7)
C05(6)G180(4)2G5C(1) CC05CH180(4) CCR05CH180(4)(1)(7)
C05(6)G200(4)2G5C(1) CC05CG200(4) CCR05CG200(4)(1)(7)
C05(6)G220(4)2G5C(1) CC05CG220(4) CCR05CG220(4)(1)(7)
C05(6)G240(4)2G5C(1) CC05CG240(4) CCR05CG240(4)(1)(7)
C05(6)G270(4)2G5C(1) CC05CG270(4) CCR05CG270(4)(1)(7)
C05(6)G300(4)2G5C(1) CC05CG300(4) CCR05CG300(4)(1)(7)
C05(6)G330(4)2G5C(1) CC05CG330(4) CCR05CG330(4)(1)(7)
C05(6)G360(4)2G5C(1) CC05CG360(4) CCR05CG360(4)(1)(7)
C05(6)G390(4)2G5C(1) CC05CG390(4) CCR05CG390(4)(1)(7)
C05(6)G430(4)2G5C(1) CC05CG430(4) CCR05CG430(4)(1)(7)
C05(6)G470(4)2G5C(1) CC05CG470(4) CCR05CG470(4)(1)(7)
C05(6)G510(4)2G5C(1) CC05CG510(4) CCR05CG510(4)(1)(7)
56.0 C05(6)G560(4)2G5C(1) CC05CG560(4) CCR05CG560(4)(1)(7)
62.0 C05(6)G620(4)2G5C(1) CC05CG620(4) CCR05CG620(4)(1)(7)
68.0 C05(6)G680(4)2G5C(1) CC05CG680(4) CCR05CG680(4)(1)(7)
75.0 C05(6)G750(4)2G5C(1) CC05CG750(4) CCR05CG750(4)(1)(7)
82.0 C05(6)G820(4)2G5C(1) CC05CG820(4) CCR75CG820(4)(1)(7)
91.0 C05(6)G910(4)2G5C(1) CC05CG910(4) CCR05CG910(4)(1)(7)
100.0 C05(6)G101(4)2G5C(1) CC05CG101(4) CCR05CG101(4)(1)(7)
110.0 C05(6)G111(4)2G5C(1) CC05CG111(4) CCR05CG111(4)(1)(7)
120.0 C05(6)G121(4)2G5C(1) CC05CG121(4) CCR05CG121(4)(1)(7)
130.0 C05(6)G131(4)2G5C(1) CC05CG131(4) CCR05CG131(4)(1)(7)
150.0 C05(6)G151(4)2G5C(1) CC05CG151(4) CCR05CG151(4)(1)(7)
160.0 C05(6)G161(4)2G5C(1) CC05CG161(4) CCR05CG161(4)(1)(7)
180.0 C05(6)G181(4)2G5C(1) CC05CG181(4) CCR05CG181(4)(1)(7)
200.0 C05(6)G201(4)2G5C(1) CC05CG201(4) CCR05CG201(4)(1)(7)
220.0 C05(6)G221(4)2G5C(1) CC05CG221(4) CCR05CG221(4)(1)(7)
240.0 C05(6)G241(4)2G5C(1) CC05CG241(4) CCR05CG241(4)(1)(7)
270.0 C05(6)G271(4)2G5C(1) CC05CG271(4) CCR05CG271(4)(1)(7)
300.0 C05(6)G301(4)2G5C(1) CC05CG301(4) CCR05CG301(4)(1)(7)
330.0 C05(6)G331(4)2G5C(1) CC05CG331(4) CCR05CG331(4)(1)(7)
100 VOLT — C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35)
360.0 C05(6)G361(4)1G5C(1) CC05CG361(4) CCR05CG361(4)(1)(7)
390.0 C05(6)G391(4)1G5C(1) CC05CG391(4) CCR05CG391(4)(1)(7)
430.0 C05(6)G431(4)1G5C(1) CC05CG431(4) CCR05CG431(4)(1)(7)
470.0 C05(6)G471(4)1G5C(1) CC05CG471(4) CCR05CG471(4)(1)(7)
510.0 C05(6)G511(4)1G5C(1) CC05CG511(4) CCR05CG511(4)(1)(7)
560.0 C05(6)G561(4)1G5C(1) CC05CG561(4) CCR05CG561(4)(1)(7)
620.0 C05(6)G621(4)1G5C(1) CC05CG621(4) CCR05CG621(4)(1)(7)
680.0 C05(6)G681(4)1G5C(1) CC05CG681(4) CCR05CG681(4)(1)(7)
750.0 C05(6)G751(4)1G5C(1) CC05CG751(4) CCR05CG751(4)(1)(7)
820.0 C05(6)G821(4)1G5C(1) CC05CG821(4) CCR05CG821(4)(1)(7)
910.0 C05(6)G911(4)1G5C(1) CC05CG911(4) CCR05CG911(4)(1)(7)
1,000.0 C05(6)G102(4)1G5C(1) CC05CG102(4) CCR05CG102(4)(1)(7)
1,100.0 C05(6)G112(4)1G5C(1) CC05CG112(4) CCR05CG112(4)(1)(7)
1,200.0 C05(6)G122(4)1G5C(1) CC05CG122(4) CCR05CG122(4)(1)(7)
1,300.0 C05(6)G132(4)1G5C(1) CC05CG132(4) CCR05CG132(4)(1)(7)
1,500.0 C05(6)G152(4)1G5C(1) CC05CG152(4) CCR05CG152(4)(1)(7)
1,600.0 C05(6)G162(4)1G5C(1) CC05CG162(4) CCR05CG162(4)(1)(7)
1,800.0 C05(6)G182(4)1G5C(1) CC05CG182(4) CCR05CG182(4)(1)(7)
50 VOLT — C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35)
2,000.0 C05(6)G202(4)5G5C(1) CC05CG202(4) CCR05CG202(4)(1)(7)
2,200.0 C05(6)G222(4)5G5C(1) CC05CG222(4) CCR05CG222(4)(1)(7)
2,400.0 C05(6)G242(4)5G5C(1) CC05CG242(4) CCR05CG242(4)(1)(7)
2,700.0 C05(6)G272(4)5G5C(1) CC05CG272(4) CCR05CG272(4)(1)(7)
3,000.0 C05(6)G302(4)5G5C(1) CC05CG302(4) CCR05CG302(4)(1)(7)
3,300.0 C05(6)G332(4)5G5C(1) CC05CG332(4) CCR05CG332(4)(1)(7)
To complete Part Number, insert the following letters:
(1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only).
(2) Available Capacitance Tolerances: B, C.
(3) Available Capacitance Tolerances: B, C, D.
(4) Available Capacitance Tolerances: F, G, J.
(5) Available Capacitance Tolerances: F, G, J, K.
(6) Insert “2” for standard design, Style C052G
Insert “6” for stand-off design, Style C056G
(7) Add “V” for stand-off design, Style C056G
Stand-offs are available
only as CCR’s, not available as CC.
}
And leave blank for the flat bottom design (C052G)
11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC - CG (EIA-C0G)
RATINGS & PART NUMBER REFERENCE
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
CAP.
pF
KEMET
PART NUMBER
MILITARY STYLE
CC
MILITARY STYLE
CCR
50 VOLT — C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36)
8,200.0 C06(6)G822(5)5G5C(1) CC06CG822(5) CCR06CG822(5)(1)(7)
9,100.0 C06(6)G912(5)5G5C(1) CC06CG912(5) CCR06CG912(5)(1)(7)
10,000.0 C06(6)G103(5)5G5C(1) CC06CG103(5) CCR06CG103(5)(1)(7)
12,000.0 C06(6)G123(5)5G5C(1) CC06CG123(5) CCR06CG123(5)(1)(7)
15,000.0 C06(6)G153(5)5G5C(1) CC06CG153(5) CCR06CG153(5)(1)(7)
18,000.0 C06(6)G183(5)5G5C(1) CC06CG183(5) CCR06CG183(5)(1)(7)
200 VOLT — C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36)
360.0 C06(6)G361(4)2G5C(1) CC06CG361(4) CCR06CG361(4)(1)(7)
390.0 C06(6)G391(4)2G5C(1) CC06CG391(4) CCR06CG391(4)(1)(7)
430.0 C06(6)G431(4)2G5C(1) CC06CG431(4) CCR06CG431(4)(1)(7)
470.0 C06(6)G471(4)2G5C(1) CC06CG471(4) CCR06CG471(4)(1)(7)
510.0 C06(6)G511(4)2G5C(1) CC06CG511(4) CCR06CG511(4)(1)(7)
560.0 C06(6)G561(4)2G5C(1) CC06CG561(4) CCR06CG561(4)(1)(7)
620.0 C06(6)G621(4)2G5C(1) CC06CG621(4) CCR06CG621(4)(1)(7)
680.0 C06(6)G681(4)2G5C(1) CC06CG681(4) CCR06CG681(4)(1)(7)
750.0 C06(6)G751(4)2G5C(1) CC06CG751(4) CCR06CG751(4)(1)(7)
820.0 C06(6)G821(4)2G5C(1) CC06CG821(4) CCR06CG821(4)(1)(7)
910.0 C06(6)G911(4)2G5C(1) CC06CG911(4) CCR06CG911(4)(1)(7)
1,000.0 C06(6)G102(4)2G5C(1) CC06CG102(4) CCR06CG102(4)(1)(7)
1,100.0 C06(6)G112(4)2G5C(1) CC06CG112(4) CCR06CG112(4)(1)(7)
1,200.0 C06(6)G122(4)2G5C(1) CC06CG122(4) CCR06CG122(4)(1)(7)
1,300.0 C06(6)G132(4)2G5C(1) CC06CG132(4) CCR06CG132(4)(1)(7)
1,500.0 C06(6)G152(4)2G5C(1) CC06CG152(4) CCR06CG152(4)(1)(7)
1,600.0 C06(6)G162(4)2G5C(1) CC06CG162(4) CCR06CG162(4)(1)(7)
1,800.0 C06(6)G182(4)2G5C(1) CC06CG182(4) CCR06CG182(4)(1)(7)
200 VOLT — C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
2,200.0 C512G222(5)2G5C(1) CC07CG222(5) CCR07CG222(5)(1)
2,700.0 C512G272(5)2G5C(1) CC07CG272(5) CCR07CG272(5)(1)
3,300.0 C512G332(5)2G5C(1) CC07CG332(5) CCR07CG332(5)(1)
3,900.0 C512G392(5)2G5C(1) CC07CG392(5) CCR07CG392(5)(1)
4,700.0 C512G472(5)2G5C(1) CC07CG472(5) CCR07CG472(5)(1)
100 VOLT — C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
5,600.0 C512G562(5)1G5C(1) CC07CG562(5) CCR07CG562(5)(1)
6,800.0 C512G682(5)1G5C(1) CC07CG682(5) CCR07CG682(5)(1)
8,200.0 C512G822(5)1G5C(1) CC07CG822(5) CCR07CG822(5)(1)
10,000.0 C512G103(5)1G5C(1) CC07CG103(5) CCR07CG103(5)(1)
12,000.0 C512G123(5)1G5C(1) CC07CG123(5) CCR07CG123(5)(1)
100 VOLT — C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36)
2,000.0 C06(6)G202(4)1G5C(1) CC06CG202(4) CCR06CG202(4)(1)(7)
2,200.0 C06(6)G222(4)1G5C(1) CC06CG222(4) CCR06CG222(4)(1)(7)
2,400.0 C06(6)G242(4)1G5C(1) CC06CG242(4) CCR06CG242(4)(1)(7)
2,700.0 C06(6)G272(4)1G5C(1) CC06CG272(4) CCR06CG272(4)(1)(7)
3,000.0 C06(6)G302(4)1G5C(1) CC06CG302(4) CCR06CG302(4)(1)(7)
3,300.0 C06(6)G332(4)1G5C(1) CC06CG332(4) CCR06CG332(4)(1)(7)
3,600.0 C06(6)G362(4)1G5C(1) CC06CG362(4) CCR06CG362(4)(1)(7)
3,900.0 C06(6)G392(4)1G5C(1) CC06CG392(4) CCR06CG392(4)(1)(7)
4,300.0 C06(6)G432(4)1G5C(1) CC06CG432(4) CCR06CG432(4)(1)(7)
4,700.0 C06(6)G472(4)1G5C(1) CC06CG472(4) CCR06CG472(4)(1)(7)
50 VOLT — C512 SIZE (CC(R)07 PER MIL-PRF-20/37)
15,000.0 C512G153(5)5G5C(1) CC07CG153(5) CCR07CG153(5)(1)
18,000.0 C512G183(5)5G5C(1) CC07CG183(5) CCR07CG183(5)(1)
22,000.0 C512G223(5)5G5C(1) CC07CG223(5) CCR07CG223(5)(1)
27,000.0 C512G273(5)5G5C(1) CC07CG273(5) CCR07CG273(5)(1)
33,000.0 C512G333(5)5G5C(1) CC07CG333(5) CCR07CG333(5)(1)
39,000.0 C512G393(5)5G5C(1) CC07CG393(5) CCR07CG393(5)(1)
47,000.0 C512G473(5)5G5C(1) CC07CG473(5) CCR07CG473(5)(1)
56,000.0 C512G563(5)5G5C(1) CC07CG563(5) CCR07CG563(5)(1)
68,000.0 C512G683(5)5G5C(1) CC07CG683(5) CCR07CG683(5)(1)
83,000.0 C512G823(5)5G5C(1) CC07CG823(5) CCR07CG823(5)(1)
100,000.0 C512G104(5)5G5C(1) CC07CG104(5) CCR07CG104(5)(1)
50 VOLT — C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36)
5,100.0 C06(6)G512(5)5G5C(1) CC06CG512(5) CCR06CG512(5)(1)(7)
5,600.0 C06(6)G562(5)5G5C(1) CC06CG562(5) CCR06CG562(5)(1)(7)
6,200.0 C06(6)G622(5)5G5C(1) CC06CG622(5) CCR06CG622(5)(1)(7)
6,800.0 C06(6)G682(5)5G5C(1) CC06CG682(5) CCR06CG682(5)(1)(7)
7,500.0 C06(6)G752(5)5G5C(1) CC06CG752(5) CCR06CG752(5)(1)(7)
200 VOLT — C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
3,900.0 C522G392(8)2G5C(1) CC08CG392(8) CCR08CG392(8)(1)
4,700.0 C522G472(8)2G5C(1) CC08CG472(8) CCR08CG472(8)(1)
100 VOLT — C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
15,000.0 C522G153(8)1G5C(1) CC08CG153(8) CCR08CG153(8)(1)
18,000.0 C522G183(8)1G5C(1) CC08CG183(8) CCR08CG183(8)(1)
To complete Part Number, insert the following letters:
(1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only).
(2) Available Capacitance Tolerances: B, C.
(3) Available Capacitance Tolerances: B, C, D.
(4) Available Capacitance Tolerances: F, G, J.
50 VOLT — C522 SIZE (CC(R)08 PER MIL-PRF-20/38)
56,000.0 C522G563(8)5G5C(1) CC08CG563(8) CCR08CG563(8)(1)
68,000.0 C522G683(8)5G5C(1) CC08CG683(8) CCR08CG683(8)(1)
(5) Available Capacitance Tolerances: F, G, J, K.
(6) Insert “2” for standard design, Style C062G
Insert “6” for stand-off design, Style C066G
(7) Add “V” for stand-off design, Style C066G
Stand-offs are available
only as CCR’s, not available as CC.
}
And leave blank for the flat bottom design (C062G)
(8) Available Capacitance Tolerances: G, J, K
12
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/MIL-C-11015 (CK) & MIL-PRF-39014 (CKR)
CAPACITOR OUTLINE DRAWINGS (AXIAL LEADS)
1.50 Min.
(38.10)
L
1.50 Min.
(38.10)
D
C
DIMENSIONS — INCHES & (MILLIMETERS)
CASE
SIZE
MILITARY
EQUIVALENT STYLES
L
C
D
C114
C124
C192
C202
C222
CK12, CKR11
CK13, CKR12
CK14, CKR14
CK15, CKR15
CK16, CKR16
.160 .010 (4.06 .25)
.250 .010 (6.35 .25)
.390 .010 (9.91 .25)
.500 .020 (12.70 .51)
.690 .030 (17.53 .76)
.090 .010 (2.29 .25)
.090 .010 (2.29 .25)
.140 .010 (3.56 .25)
.250 .015 (6.35 .38)
.350 .020 (8.89 .51)
.020, +.000, -.003 (.51, +.00, -.08)
.020, +.000, -.003 (.51, +.00, -.08)
.025, +.002, -.002 (.64, +.05, -.05)
.025, +.002, -.002 (.64, +.05, -.05)
.025, +.002, -.002 (.64, +.05, -.05)
CAPACITOR OUTLINE DRAWINGS (RADIAL LEADS)
C052 (CK05, CKR05)
C056 (CKR05)
L
C062 (CK06, CKR06)
C066 (CKR06)
L W
L
L
W
W
W
.026
MIN.
H
H
H
H
.026
MIN.
Lead Dia.
.025
(+.004
-.002)
.045
MAX.
Lead Dia.
.025
(+.004
-.002)
1.25
*
1.25
Lead Dia.
.025
(+.004
*
Lead Dia.
.025
(+.004
-.002)
*1.25
MIN.
*1.25
MIN.
MIN.
MIN.
-.002)
S
S
S
S
Center Line of leads within .030" of Center Line of case.
* Leads are .625 minimum when tape and reel packaged.
DIMENSIONS — INCHES & (MILLIMETERS)
MILITARY
EQUIVALENT
STYLES
S
CASE
SIZE
H
L
W
WIDTH
LEAD
HEIGHT
LENGTH
SPACING
C052/
C056
CK05, CKR05
CK06, CKR06
.190 .010 (4.83 .25)
.290 .010 (7.37 .25)
.190 .010 (4.83 .25)
.290 .010 (7.37 .25)
.090 .010 (2.29 .25)
.090 .010 (2.29 .25)
.200 .015 (5.08 .38)
.200 .015 (5.08 .38)
C062/
C066
13
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/MIL-C-11015 (CK) & MIL-PRF-39014 (CKR)
ORDERING INFORMATION
**
A
C
C 052 K 102
K
X 5
2
CERAMIC
FAILURE RATE
A — Not Applicable (Std.)
M — 1.0%
*CASE SIZE
(See Table Below)
P — 0.1%
R — 0.01%
S — 0.001%
SPECIFICATION
Military
T — MIL-PRF-39014
K — MIL-C-11015
LEAD MATERIAL
C — Standard
CAPACITANCE
In picofarad code: First two digits are significant
figures and third is number of zeroes following
(except 9 indicates division by 10). Examples:
0.1 F = 100,000 pF = 104 and 9.1 pF = 919.
See tables for Standard Values.
INTERNAL CONSTRUCTION
5 — Standard
CAPACITANCE TOLERANCE
Standard
M — 20%
K — 10%
TEMPERATURE CHARACTERISTIC
Capacitance Change WithTemp.
WORKING
Measured Measured
VOLTAGE
1 — 100
2 — 200
5 — 50
Without
DC Bias
Voltage
With Bias
(Rated
KEMET
Military
EIA
Temp.
Designator Equivalent Equivalent Range, °C
Voltage)
+15%
-25%
+15%
-40%
Standard tolerances for each Series are
shown in the repetitive parts lists.
X
BX
BR
X7R
X7R
-55 to
15%
(Stable)
+125
R
-55 to
+125
15%
*CASE SIZES
(Stable)
RADIAL
C052
C056
C062
C066
AXIAL
C114
C124
C192
C202
C222
**Part Number Example: C052K102K2X5CA (14 digits – no spaces)
MARKING INFORMATION
C114T (CKR11) THROUGH C222T (CKR16) PER MIL-PRF-39014
C114T (CKR11)
C124T (CKR12)
C192T (CKR14) C202T (CKR15) C222T (CKR16)
Style
Complete Part Number
Manufacturer’s Name
CKR12
2657J
0537A
31433
M39014
5-2125
KEMET
0537A
J50V
J for JAN
K for KEMET
Capacitance
Capacitance Tolerance, FR Level
& Date Code (Yr.)
JK
Dash No., J for JAN
103
KP5
37A
Date & Lot Code
Source Code
Date & Lot Code
JAN & Voltage
(Federal Supply Code
for Manufacturers,
FSCM)
Date and Lot Code
105K
Capacitance, pF Code, Capacitance
Tolerance
C052/56T (CKR05) PER MIL-PRF-39014/01
FRONT
BACK
Specification
Sheet No.
JK
JAN-KEMET
M390
Date Code
Lot Code
14/01
0537
A
Four Digit Part No.
1579*
*Add “V” as the last
digit for stand-off leads.
C062/66T (CKR06) PER MIL-PRF-39014/02
FRONT
BACK
0537A
J200V
103K
Complete MIL Part No.
Manufacturer’s Name
Date & Lot Code
M39014
2-1338
JAN & Voltage
Capacitance, pF Code, Capacitance Tolerance
*KEMET
*Add “V” as the last digit
for stand-off leads.
C114K (CK12) THROUGH C222K (CK16) PER MIL-C-11015
C114K (CK12) C124K (CK13)
KCK
C192K (CK14) C202K (CK15) C222K (CK16)
KEMET, CK
KEMET, Voltage
K100V
CK14BX
123K
12BX
102K
0537
Style (12 or 13), Temp. Char. (BX or BR)
Capacitance, pF Code, Capacitance Tolerance
Date Code
Style (14, 15 or 16), Temp. Char. (BX or BR)
Capacitance, pF Code, Capacitance Tolerance
Date Code
0537
C052K (CK05) PER MIL-C-11015/18 & C062K (CK06) PER MIL-C-11015/19
FRONT
BACK
Voltage
200V
K
0501
Style
CK05
BX
102K
KEMET
Temperature Characteristic
Date Code
14
Capacitance, pF Code, Capacitance Tolerance
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-C-11015 & MIL-PRF-39014
STABLE TEMPERATURE CHARACTERISTICS - BX & BR (EIA-X7R)
RATINGS & PART NUMBER REFERENCE
MIL-PRF-39014/05 For Failure Rate Levels (2)
CAP.
pF
TOL.
%
KEMET
PART NUMBER
MIL-C-11015/20
MIL-PRF-39014/05
M
P
R
S
100 VOLT — C114 SIZE (MILITARY—CK12 or CKR11)
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C114(1)100K1X5C(2)
C114(1)100M1X5C(2)
C114(1)120K1X5C(2)
C114(1)150K1X5C(2)
C114(1)150M1X5C(2)
C114(1)180K1X5C(2)
C114(1)220K1X5C(2)
C114(1)220M1X5C(2)
C114(1)270K1X5C(2)
C114(1)330K1X5C(2)
C114(1)330M1X5C(2)
C114(1)390K1X5C(2)
C114(1)470K1X5C(2)
C114(1)470M1X5C(2)
C114(1)560K1X5C(2)
C114(1)680K1X5C(2)
C114(1)680M1X5C(2)
C114(1)820K1X5C(2)
C114(1)101K1X5C(2)
C114(1)101M1X5C(2)
C114(1)121K1X5C(2)
C114(1)151K1X5C(2)
C114(1)151M1X5C(2)
C114(1)181K1X5C(2)
C114(1)221K1X5C(2)
C114(1)221M1X5C(2)
C114(1)271K1X5C(2)
C114(1)331K1X5C(2)
C114(1)331M1X5C(2)
C114(1)391K1X5C(2)
C114(1)471K1X5C(2)
C114(1)471M1X5C(2)
C114(1)561K1X5C(2)
C114(1)681K1X5C(2)
C114(1)681M1X5C(2)
C114(1)821K1X5C(2)
C114(1)102K1X5C(2)
C114(1)102M1X5C(2)
C114(1)122K1X5C(2)
C114(1)152K1X5C(2)
C114(1)152M1X5C(2)
C114(1)182K1X5C(2)
C114(1)222K1X5C(2)
C114(1)222M1X5C(2)
C114(1)272K1X5C(2)
C114(1)332K1X5C(2)
C114(1)332M1X5C(2)
C114(1)392K1X5C(2)
C114(1)472K1X5C(2)
C114(1)472M1X5C(2)
CK12BX100K
CK12BX100M
CK12BX120K
CK12BX150K
CK12BX150M
CK12BX180K
CK12BX220K
CK12BX220M
CK12BX270K
CK12BX330K
CK12BX330M
CK12BX390K
CK12BX470K
CK12BX470M
CK12BX560K
CK12BX680K
CK12BX680M
CK12BX820K
CK12BX101K
CK12BX101M
CK12BX121K
CK12BX151K
CK12BX151M
CK12BX181K
CK12BX221K
CK12BX221M
CK12BX271K
CK12BX331K
CK12BX331M
CK12BX391K
CK12BX471K
CK12BX471M
CK12BX561K
CK12BX681K
CK12BX681M
CK12BX821K
CK12BX102K
CK12BX102M
CK12BX122K
CK12BX152K
CK12BX152M
CK12BX182K
CK12BX222K
CK12BX222M
CK12BX272K
CK12BX332K
CK12BX332M
CK12BX392K
CK12BX472K
CK12BX472M
CKR11BX100K(2)
CKR11BX100M(2)
CKR11BX120K(2)
CKR11BX150K(2)
CKR11BX150M(2)
CKR11BX180K(2)
CKR11BX220K(2)
CKR11BX220M(2)
CKR11BX270K(2)
CKR11BX330K(2)
CKR11BX330M(2)
CKR11BX390K(2)
CKR11BX470K(2)
CKR11BX470M(2)
CKR11BX560K(2)
CKR11BX680K(2)
CKR11BX680M(2)
CKR11BX820K(2)
CKR11BX101K(2)
CKR11BX101M(2)
CKR11BX121K(2)
CKR11BX151K(2)
CKR11BX151M(2)
CKR11BX181K(2)
CKR11BX221K(2)
CKR11BX221M(2)
CKR11BX271K(2)
CKR11BX331K(2)
CKR11BX331M(2)
CKR11BX391K(2)
CKR11BX471K(2)
CKR11BX471M(2)
CKR11BX561K(2)
CKR11BX681K(2)
CKR11BX681M(2)
CKR11BX821K(2)
CKR11BX102K(2)
CKR11BX102M(2)
CKR11BX122K(2)
CKR11BX152K(2)
CKR11BX152M(2)
CKR11BX182K(2)
CKR11BX222K(2)
CKR11BX222M(2)
CKR11BX272K(2)
CKR11BX332K(2)
CKR11BX332M2)
CKR11BX392K(2)
CKR11BX472K(2)
CKR11BX472M2)
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
10
12
15
15
18
22
22
27
33
33
39
47
47
56
68
68
82
100
100
120
150
150
180
220
220
270
330
330
390
470
470
560
680
680
820
1,000
1,000
1,200
1,500
1,500
1,800
2,200
2,200
2,700
3,300
3,300
3,900
4,700
4,700
50 VOLT — C114 SIZE (MILITARY—CK12 or CKR11)
5,600
6,800
10
10
20
10
10
20
C114(1)562K5X5C(2)
C114(1)682K5X5C(2)
C114(1)682M5X5C(2)
C114(1)822K5X5C(2)
C114(1)103K5X5C(2)
C114(1)103M5X5C(2)
CK12BX562K
CK12BX682K
CK12BX682M
CK12BX822K
CK12BX103K
CK12BX103M
CKR11BX562K(2)
CKR11BX682K(2)
CKR11BX682M(2)
CKR11BX822K(2)
CKR11BX103K(2)
CKR11BX103M(2)
2651
2652
2653
2654
2655
2656
2851
2852
2853
2854
2855
2856
2051
2052
2053
2054
2055
2056
2251
2252
2253
2254
2255
2256
6,800
8,200
10,000
10,000
100 VOLT — C124 SIZE (MILITARY—CK13 or CKR12)
5,600
6,800
10
10
20
10
10
20
C124(1)562K1X5C(2)
C124(1)682K1X5C(2)
C124(1)682M1X5C(2)
C124(1)822K1X5C(2)
C124(1)103K1X5C(2)
C124(1)103M1X5C(2)
CK13BX562K
CK13BX682K
CK13BX682M
CK13BX822K
CK13BX103K
CK13BX103M
CKR12BX562K(2)
CKR12BX682K(2)
CKR12BX682M(2)
CKR12BX822K(2)
CKR12BX103K(2)
CKR12BX103M(2)
2657
2658
2659
2660
2661
2662
2857
2858
2859
2860
2861
2862
2057
2058
2059
2060
2061
2062
2257
2258
2259
2260
2261
2262
6,800
8,200
10,000
10,000
50 VOLT — C124 SIZE (MILITARY—CK13 or CKR12)
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
10
10
20
10
10
20
10
10
20
10
10
20
C124(1)123K5X5C(2)
C124(1)153K5X5C(2)
C124(1)153M5X5C(2)
C124(1)183K5X5C(2)
C124(1)223K5X5C(2)
C124(1)223M5X5C(2)
C124K273K5R5CA
C124K333K5R5CA
C124K333M5R5CA
C124K393K5R5CA
C124K473K5R5CA
C124K473M5R5CA
CK13BX123K
CK13BX153K
CK13BX153M
CK13BX183K
CK13BX223K
CK13BX223M
CK13BR273K
CK13BR333K
CK13BR333M
CK13BR393K
CK13BR473K
CK13BR473M
CKR12BX123K(2)
CKR12BX153K(2)
CKR12BX153M(2)
CKR12BX183K(2)
CKR12BX223K(2)
CKR12BX223M(2)
2663
2664
2665
2666
2667
2668
2863
2864
2865
2866
2867
2868
2063
2064
2065
2066
2067
2068
2263
2264
2265
2266
2267
2268
(1) Insert proper letter for specification: K — MIL-C-11015; T — MIL-PRF-39014 (2) Failure Rate Designator: A — Not applicable (MIL-C-11015); M — 1%/1000 Hours,
P — .1%/1000 Hours, R — .01%/1000 Hours, S — .001%/1000 Hours (MIL-PRF-39014)
15
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/AXIAL - MIL-C-11015 & MIL-PRF-39014
STABLE TEMPERATURE CHARACTERISTICS - BX & BR (EIA-X7R)
RATINGS & PART NUMBER REFERENCE
MIL-PRF-39014/05 For Failure Rate Levels (2)
CAP.
pF
TOL.
%
KEMET
PART NUMBER
MIL-C-11015/20
MIL-PRF-39014/05
M
P
R
S
50 VOLT — C124 SIZE (MILITARY—CK13 or CKR12) (Cont’d)
27,000
33,000
33,000
39,000
47,000
47,000
10
10
20
10
10
20
C124T273K5X5C(2)
CKR12BX273K(2)
CKR12BX333K(2)
CKR12BX333M(2)
CKR12BX393K(2)
CKR12BX473K(2)
CKR12BX473M(2)
2669
2670
2671
2672
2673
2674
2869
2870
2871
2872
2873
2874
2069
2070
2071
2072
2073
2074
2269
2270
2271
2272
2273
2274
C124T333K5X5C(2)
C124T333M5X5C(2)
C124T393K5X5C(2)
C124T473K5X5C(2)
C124T473M5X5C(2)
100 VOLT — C192 SIZE (MILITARY—CK14 or CKR14)
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C192(1)123K1X5C(2)
C192(1)153K1X5C(2)
C192(1)153M1X5C(2)
C192(1)183K1X5C(2)
C192(1)223K1X5C(2)
C192(1)223M1X5C(2)
C192(1)273K1X5C(2)
C192(1)333K1X5C(2)
C192(1)333M1X5C(2)
C192(1)393K1X5C(2)
C192(1)473K1X5C(2)
C192(1)473M1X5C(2)
C192(1)563K1R5C(2)
C192(1)683K1R5C(2)
C192(1)683M1R5C(2)
C192(1)823K1R5C(2)
C192(1)104K1R5C(2)
C192(1)104M1R5C(2)
CK14BX123K
CK14BX153K
CK14BX153M
CK14BX183K
CK14BX223K
CK14BX223M
CK14BX273K
CK14BX333K
CK14BX333M
CK14BX393K
CK14BX473K
CK14BX473M
CK14BR563K
CK14BR683K
CK14BR683M
CK14BR823K
CK14BR104K
CK14BR104M
CKR14BX123K(2)
CKR14BX153K(2)
CKR14BX153M(2)
CKR14BX183K(2)
CKR14BX223K(2)
CKR14BX223M(2)
CKR14BX273K(2)
CKR14BX333K(2)
CKR14BX333M(2)
CKR14BX393K(2)
CKR14BX473K(2)
CKR14BX473M(2)
CKR14BR563K(2)
CKR14BR683K(2)
CKR14BR683M(2)
CKR14BR823K(2)
CKR14BR104K(2)
CKR14BR104M(2)
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2693
2694
2695
2696
2697
2698
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2893
2894
2895
2896
2897
2898
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2093
2094
2095
2096
2097
2098
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2293
2294
2295
2296
2297
2298
50 VOLT — C192 SIZE (MILITARY—CK14 or CKR14)
CKR14BX563K(2)
56,000
68,000
10
10
20
10
10
20
10
10
20
10
10
20
10
C192T563K5X5C(2)
C192T683K5X5C(2)
C192T683M5X5C(2)
C192T823K5X5C(2)
C192T104K5X5C(2)
C192T104M5X5C(2)
2687
2688
2689
2690
2691
2692
2699
2700
2701
2702
2703
2704
2705
2887
2888
2889
2890
2891
2892
2899
2900
2901
2902
2903
2904
2905
2087
2088
2089
2090
2091
2092
2099
2100
2101
2102
2103
2104
2105
2287
2288
2289
2290
2291
2292
2299
2300
2301
2302
2303
2304
2305
CKR14BX683K(2)
68,000
CKR14BX683M(2)
82,000
CKR14BX823K(2)
100,000
100,000
120,000
150,000
150,000
180,000
220,000
220,000
270,000
CKR14BX104K(2)
CKR14BX104M(2)
C192(1)124K5R5C(2)
C192(1)154K5R5C(2)
C192(1)154M5R5C(2)
C192(1)184K5R5C(2)
C192(1)224K5R5C(2)
C192(1)224M5R5C(2)
C192(1)274K5R5C(2)
CK14BR124K
CK14BR154K
CK14BR154M
CK14BR184K
CK14BR224K
CK14BR224M
CK14BR274K
CKR14BR124K(2)
CKR14BR154K(2)
CKR14BR154M(2)
CKR14BR184K(2)
CKR14BR224K(2)
CKR14BR224M(2)
CKR14BR274K(2)
100 VOLT — C202 SIZE (MILITARY—CK15 or CKR15)
CKR15BX563K(2)
56,000
68,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C202T563K1X5C(2)
C202T683K1X5C(2)
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
CKR15BX683K(2)
68,000
C202T683M1X5C(2)
C202T823K1X5C(2)
C202(1)104K1X5C(2)
C202(1)104M1X5C(2)
C202(1)124K1R5C(2)
C202(1)154K1R5C(2)
C202(1)154M1R5C(2)
C202(1)184K1R5C(2)
C202(1)224K1R5C(2)
C202(1)224M1R5C(2)
C202(1)274K1R5C(2)
C202(1)334K1R5C(2)
C202(1)334M1R5C(2)
CKR15BX683M(2)
CKR15BX823K(2)
CKR15BX104K(2)
CKR15BX104M(2)
CKR15BR124K(2)
CKR15BR154K(2)
CKR15BR154M(2)
CKR15BR184K(2)
CKR15BR224K(2)
CKR15BR224M(2)
CKR15BR274K(2)
CKR15BR334K(2)
CKR15BR334M(2)
82,000
100,000
100,000
120,000
150,000
150,000
180,000
220,000
220,000
270,000
330,000
330,000
CK15BX104K
CK15BX104M
CK15BR124K
CK15BR154K
CK15BR154M
CK15BR184K
CK15BR224K
CK15BR224M
CK15BR274K
CK15BR334K
CK15BR334M
50 VOLT — C202 SIZE (MILITARY—CK15 or CKR15)
470,000
470,000
10
20
10
20
10
20
C202(1)474K5R5C(2)
C202(1)474M5R5C(2)
C202T684K5R5C(2)
C202T684M5R5C(2)
C202(1)105K5R5C(2)
C202(1)105M5R5C(2)
CK15BR474K
CK15BR474M
CKR15BR474K(2)
CKR15BR474M(2)
CKR15BR684K(2)
CKR15BR684M(2)
CKR15BR105K(2)
CKR15BR105M(2)
2721
2722
2723
2724
2725
2726
2921
2922
2923
2924
2925
2926
2121
2122
2123
2124
2125
2126
2321
2322
2323
2324
2325
2326
680,000
680,000
1,000,000
1,000,000
CK15BR105K
CK15BR105M
100 VOLT — C222 SIZE (MILITARY—CK16 or CKR16)
470,000
470,000
10
20
10
20
10
20
C222(1)474K1R5C(2)
C222(1)474M1R5C(2)
C222T684K1R5C(2)
C222T684M1R5C(2)
C222(1)105K1R5C(2)
C222(1)105M1R5C(2)
CK16BR474K
CKR16BR474K(2)
CKR16BR474M(2)
CKR16BR684K(2)
CKR16BR684M(2)
CKR16BR105K(2)
CKR16BR105M(2)
2727
2728
2729
2730
2731
2732
2927
2928
2929
2930
2931
2932
2127
2128
2129
2130
2131
2132
2327
2328
2329
2330
2331
2332
CK16BR474M
680,000
680,000
1,000,000
1,000,000
CK16BR105K
CK16BR105M
50 VOLT — C222 SIZE (MILITARY—CK16 or CKR16)
2,200,000
2,200,000
3,300,000
3,300,000
10
20
10
20
C222(1)225K5R5C(2)
C222(1)225M5R5C(2)
C222(1)335K5R5C(2)
C222(1)335M5R5C(2)
CK16BR225K
CK16BR225M
CK16BR335M
CK16BR335M
CKR16BR225K(2)
CKR16BR225M(2)
CKR16BR335K(2)
CKR16BR335M(2)
2733
2734
2735
2736
2933
2934
2935
2936
2133
2134
2135
2136
2333
2334
2335
2336
(1) Insert proper letter for specification: K — MIL-C-11015; T — MIL-PRF-39014 (2) Failure Rate Designator: A — Not applicable (MIL-C-11015); M — 1%/1000 Hours,
P — .1%/1000 Hours, R — .01%/1000 Hours, S — .001%/1000 Hours (MIL-PRF-39014)
16
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL - MIL-C-11015 & MIL-PRF-39014
STABLE TEMPERATURE CHARACTERISTICS - BX & BR (EIA-X7R)
RATINGS & PART NUMBER REFERENCE
MIL-PRF-39014/01 For Failure Rate Levels (2)
CAP.
pF
TOL.
%
KEMET
PART NUMBER
MIL-C-11015/18
MIL-PRF-39014/01
M
P
R
S
200 VOLT — C052/C056 SIZE (MILITARY—CK05 or CKR05)
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C05(4)(1)100K2X5C(2)
C05(4)(1)100M2X5C(2)
C05(4)(1)120K2X5C(2)
C05(4)(1)150K2X5C(2)
C05(4)(1)150M2X5C(2)
C05(4)(1)180K2X5C(2)
C05(4)(1)220K2X5C(2)
C05(4)(1)220M2X5C(2)
C05(4)(1)270K2X5C(2)
C05(4)(1)330K2X5C(2)
C05(4)(1)330M2X5C(2)
C05(4)(1)390K2X5C(2)
C05(4)(1)470K2X5C(2)
C05(4)(1)470M2X5C(2)
C05(4)(1)560K2X5C(2)
C05(4)(1)680K2X5C(2)
C05(4)(1)680M2X5C(2)
C05(4)(1)820K2X5C(2)
C05(4)(1)101K2X5C(2)
C05(4)(1)101M2X5C(2)
C05(4)(1)121K2X5C(2)
C05(4)(1)151K2X5C(2)
C05(4)(1)151M2X5C(2)
C05(4)(1)181K2X5C(2)
C05(4)(1)221K2X5C(2)
C05(4)(1)221M2X5C(2)
C05(4)(1)271K2X5C(2)
C05(4)(1)331K2X5C(2)
C05(4)(1)331M2X5C(2)
C05(4)(1)391K2X5C(2)
C05(4)(1)471K2X5C(2)
C05(4)(1)471M2X5C(2)
C05(4)(1)561K2X5C(2)
C05(4)(1)681K2X5C(2)
C05(4)(1)681M2X5C(2)
C05(4)(1)821K2X5C(2)
C05(4)(1)102K2X5C(2)
C05(4)(1)102M2X5C(2)
CK05BX100K
CK05BX100M
CK05BX120K
CK05BX150K
CK05BX150M
CK05BX180K
CK05BX220K
CK05BX220M
CK05BX270K
CK05BX330K
CK05BX330M
CK05BX390K
CK05BX470K
CK05BX470M
CK05BX560K
CK05BX680K
CK05BX680M
CK05BX820K
CK05BX101K
CK05BX101M
CK05BX121K
CK05BX151K
CK05BX151M
CK05BX181K
CK05BX221K
CK05BX221M
CK05BX271K
CK05BX331K
CK05BX331M
CK05BX391K
CK05BX471K
CK05BX471M
CK05BX561K
CK05BX681K
CK05BX681M
CK05BX821K
CK05BX102K
CK05BX102M
CKR05BX100K(2)(3)
CKR05BX100M(2)(3)
CKR05BX120K(2)(3)
CKR05BX150K(2)(3)
CKR05BX150M(2)(3)
CKR05BX180K(2)(3)
CKR05BX220K(2)(3)
CKR05BX220M(2)(3)
CKR05BX270K(2)(3)
CKR05BX330K(2)(3)
CKR05BX330M(2)(3)
CKR05BX390K(2)(3)
CKR05BX470K(2)(3)
CKR05BX470M(2)(3)
CKR05BX560K(2)(3)
CKR05BX680K(2)(3)
CKR05BX680M(2)(3)
CKR05BX820K(2)(3)
CKR05BX101K(2)(3)
CKR05BX101M(2)(3)
CKR05BX121K(2)(3)
CKR05BX151K(2)(3)
CKR05BX151M(2)(3)
CKR05BX181K(2)(3)
CKR05BX221K(2)(3)
CKR05BX221M(2)(3)
CKR05BX271K(2)(3)
CKR05BX331K(2)(3)
CKR05BX331M(2)(3)
CKR05BX391K(2)(3)
CKR05BX471K(2)(3)
CKR05BX471M(2)(3)
CKR05BX561K(2)(3)
CKR05BX681K(2)(3)
CKR05BX681M(2)(3)
CKR05BX821K(2)(3)
CKR05BX102K(2)(3)
CKR05BX102M(2)(3)
1201(3)
1202(3)
1203(3)
1204(3)
1205(3)
1206(3)
1207(3)
1208(3)
1209(3)
1210(3)
1211(3)
1212(3)
1213(3)
1214(3)
1215(3)
1216(3)
1217(3)
1218(3)
1219(3)
1220(3)
1221(3)
1222(3)
1223(3)
1224(3)
1225(3)
1226(3)
1227(3)
1228(3)
1229(3)
1230(3)
1231(3)
1232(3)
1233(3)
1234(3)
1235(3)
1236(3)
1237(3)
1238(3)
1241(3) 1281(3) 1321(3)
1242(3) 1282(3) 1322(3)
1243(3) 1283(3) 1323(3)
1244(3) 1284(3) 1324(3)
1245(3) 1285(3) 1325(3)
1246(3) 1286(3) 1326(3)
1247(3) 1287(3) 1327(3)
1248(3) 1288(3) 1328(3)
1249(3) 1289(3) 1329(3)
1250(3) 1290(3) 1330(3)
1251(3) 1291(3) 1331(3)
1252(3) 1292(3) 1332(3)
1253(3) 1293(3) 1333(3)
1254(3) 1294(3) 1334(3)
1255(3) 1295(3) 1335(3)
1256(3) 1296(3) 1336(3)
1257(3) 1297(3) 1337(3)
1258(3) 1298(3) 1338(3)
1259(3) 1299(3) 1339(3)
1260(3) 1300(3) 1340(3)
1261(3) 1301(3) 1341(3)
1262(3) 1302(3) 1342(3)
1263(3) 1303(3) 1343(3)
1264(3) 1304(3) 1344(3)
1265(3) 1305(3) 1345(3)
1266(3) 1306(3) 1346(3)
1267(3) 1307(3) 1347(3)
1268(3) 1308(3) 1348(3)
1269(3) 1309(3) 1349(3)
1270(3) 1310(3) 1350(3)
1271(3) 1311(3) 1351(3)
1272(3) 1312(3) 1352(3)
1273(3) 1313(3) 1353(3)
1274(3) 1314(3) 1354(3)
1275(3) 1315(3) 1355(3)
1276(3) 1316(3) 1356(3)
1277(3) 1317(3) 1357(3)
1278(3) 1318(3) 1358(3)
10
12
15
15
18
22
22
27
33
33
39
47
47
56
68
68
82
100
100
120
150
150
180
220
220
270
330
330
390
470
470
560
680
680
820
1,000
1,000
100 VOLT — C052/C056 SIZE (MILITARY—CK05 or CKR05)
1,200
1,500
1,500
1,800
2,200
2,200
2,700
3,300
3,300
3,900
4,700
4,700
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C05(4)(1)122K1X5C(2)
C05(4)(1)152K1X5C(2)
C05(4)(1)152M1X5C(2)
C05(4)(1)182K1X5C(2)
C05(4)(1)222K1X5C(2)
C05(4)(1)222M1X5C(2)
C05(4)(1)272K1X5C(2)
C05(4)(1)332K1X5C(2)
C05(4)(1)332M1X5C(2)
C05(4)(1)392K1X5C(2)
C05(4)(1)472K1X5C(2)
C05(4)(1)472M1X5C(2)
C05(4)(1)562K1X5C(2)
C05(4)(1)682K1X5C(2)
C05(4)(1)682M1X5C(2)
C05(4)(1)822K1X5C(2)
C05(4)(1)103K1X5C(2)
C05(4)(1)103M1X5C(2)
CK05BX122K
CK05BX152K
CK05BX152M
CK05BX182K
CK05BX222K
CK05BX222M
CK05BX272K
CK05BX332K
CK05BX332M
CK05BX392K
CK05BX472K
CK05BX472M
CK05BX562K
CK05BX682K
CK05BX682M
CK05BX822K
CK05BX103K
CK05BX103M
CKR05BX122K(2)(3)
CKR05BX152K(2)(3)
CKR05BX152M(2)(3)
CKR05BX182K(2)(3)
CKR05BX222K(2)(3)
CKR05BX222M(2)(3)
CKR05BX272K(2)(3)
CKR05BX332K(2)(3)
CKR05BX332M(2)(3)
CKR05BX392K(2)(3)
CKR05BX472K(2)(3)
CKR05BX472M(2)(3)
CKR05BX562K(2)(3)
CKR05BX682K(2)(3)
CKR05BX682M(2)(3)
CKR05BX822K(2)(3)
CKR05BX103K(2)(3)
CKR05BX103M(2)(3)
1239(3)
1240(3)
1441(3)
1442(3)
1443(3)
1444(3)
1445(3)
1446(3)
1447(3)
1448(3)
1449(3)
1450(3)
1451(3)
1452(3)
1453(3)
1454(3)
1455(3)
1456(3)
1279(3) 1319(3) 1359(3)
1280(3) 1320(3) 1360(3)
1481(3) 1521(3) 1561(3)
1482(3) 1522(3) 1562(3)
1483(3) 1523(3) 1563(3)
1484(3) 1524(3) 1564(3)
1485(3) 1525(3) 1565(3)
1486(3) 1526(3) 1566(3)
1487(3) 1527(3) 1567(3)
1488(3) 1528(3) 1568(3)
1489(3) 1529(3) 1569(3)
1490(3) 1530(3) 1570(3)
1491(3) 1531(3) 1571(3)
1492(3) 1532(3) 1572(3)
1493(3) 1533(3) 1573(3)
1494(3) 1534(3) 1574(3)
1495(3) 1535(3) 1575(3)
1496(3) 1536(3) 1576(3)
50 VOLT — C052/C056 SIZE (MILITARY—CK05 or CKR05)
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C05(4)(1)123K5X5C(2)
C05(4)(1)153K5X5C(2)
C05(4)(1)153M5X5C(2)
C05(4)(1)183K5X5C(2)
C05(4)(1)223K5X5C(2)
C05(4)(1)223M5X5C(2)
C05(4)(1)273K5X5C(2)
C05(4)(1)333K5X5C(2)
C05(4)(1)333M5X5C(2)
C05(4)(1)393K5X5C(2)
C05(4)(1)473K5X5C(2)
C05(4)(1)473M5X5C(2)
C05(4)(1)563K5X5C(2)
C05(4)(1)683K5X5C(2)
C05(4)(1)683M5X5C(2)
C05(4)(1)823K5X5C(2)
C05(4)(1)104K5X5C(2)
C05(4)(1)104M5X5C(2)
CK05BX123K
CK05BX153K
CK05BX153M
CK05BX183K
CK05BX223K
CK05BX223M
CK05BX273K
CK05BX333K
CK05BX333M
CK05BX393K
CK05BX473K
CK05BX473M
CK05BX563K
CK05BX683K
CK05BX683M
CK05BX823K
CK05BX104K
CK05BX104M
CKR05BX123K(2)(3)
CKR05BX153K(2)(3)
CKR05BX153M(2)(3)
CKR05BX183K(2)(3)
CKR05BX223K(2)(3)
CKR05BX223M(2)(3)
CKR05BX273K(2)(3)
CKR05BX333K(2)(3)
CKR05BX333M(2)(3)
CKR05BX393K(2)(3)
CKR05BX473K(2)(3)
CKR05BX473M(2)(3)
CKR05BX563K(2)(3)
CKR05BX683K(2)(3)
CKR05BX683M(2)(3)
CKR05BX823K(2)(3)
CKR05BX104K(2)(3)
CKR05BX104M(2)(3)
1457(3)
1458(3)
1459(3)
1460(3)
1461(3)
1462(3)
1463(3)
1464(3)
1465(3)
1466(3)
1467(3)
1468(3)
1469(3)
1470(3)
1471(3)
1472(3)
1473(3)
1474(3)
1497(3) 1537(3) 1577(3)
1498(3) 1538(3) 1578(3)
1499(3) 1539(3) 1579(3)
1500(3) 1540(3) 1580(3)
1501(3) 1541(3) 1581(3)
1502(3) 1542(3) 1582(3)
1503(3) 1543(3) 1583(3)
1504(3) 1544(3) 1584(3)
1505(3) 1545(3) 1585(3)
1506(3) 1546(3) 1586(3)
1507(3) 1547(3) 1587(3)
1508(3) 1548(3) 1588(3)
1509(3) 1549(3) 1589(3)
1510(3) 1550(3) 1590(3)
1511(3) 1551(3) 1591(3)
1512(3) 1552(3) 1592(3)
1513(3) 1553(3) 1593(3)
1514(3) 1554(3) 1594(3)
(1) Insert proper letter for specification: K — MIL-C-11015; T — MIL-PRF-39014 (2) Failure Rate Designator: A — Not applicable (MIL-C-11015); M — 1%/1000 Hours,
P — .1%/1000 Hours, R — .01%/1000 Hours, S — .001%/1000 Hours (MIL-PRF-39014)
(3) Insert “V” for standard design (C056). Leave blank for the flat bottom design (C052).
(4) Insert “2” for standard design (Style C052)
Insert “6” for stand-off design (Style C056)
Note: Stand-offs are available only
with the CKR, not the CK.
17
}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC MOLDED/RADIAL - MIL-C-11015 & MIL-PRF-39014
STABLE TEMPERATURE CHARACTERISTICS - BX & BR (EIA-X7R)
RATINGS & PART NUMBER REFERENCE
MIL-PRF-39014/02 For Failure Rate Levels (2)
CAP.
pF
TOL.
%
KEMET
PART NUMBER
MIL-C-11015/19
MIL-PRF-39014/02
M
P
R
S
200 VOLT — C062/C066 SIZE (MILITARY—CK06 or CKR06)
1,200
1,500
1,500
1,800
2,200
2,200
2,700
3,300
3,300
3,900
4,700
4,700
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C06(4)(1)122K2X5C(2)
C06(4)(1)152K2X5C(2)
C06(4)(1)152M2X5C(2)
C06(4)(1)182K2X5C(2)
C06(4)(1)222K2X5C(2)
C06(4)(1)222M2X5C(2)
C06(4)(1)272K2X5C(2)
C06(4)(1)332K2X5C(2)
C06(4)(1)332M2X5C(2)
C06(4)(1)392K2X5C(2)
C06(4)(1)472K2X5C(2)
C06(4)(1)472M2X5C(2)
C06(4)(1)562K2X5C(2)
C06(4)(1)682K2X5C(2)
C06(4)(1)682M2X5C(2)
C06(4)(1)822K2X5C(2)
C06(4)(1)103K2X5C(2)
C06(4)(1)103M2X5C(2)
CK06BX122K
CK06BX152K
CK06BX152M
CK06BX182K
CK06BX222K
CK06BX222M
CK06BX272K
CK06BX332K
CK06BX332M
CK06BX392K
CK06BX472K
CK06BX472M
CK06BX562K
CK06BX682K
CK06BX682M
CK06BX822K
CK06BX103K
CK06BX103M
CKR06BX122K(2)(3)
CKR06BX152K(2)(3)
CKR06BX152M(2)(3)
CKR06BX182K(2)(3)
CKR06BX222K(2)(3)
CKR06BX222M(2)(3)
CKR06BX272K(2)(3)
CKR06BX332K(2)(3)
CKR06BX332M(2)(3)
CKR06BX392K(2)(3)
CKR06BX472K(2)(3)
CKR06BX472M(2)(3)
CKR06BX562K(2)(3)
CKR06BX682K(2)(3)
CKR06BX682M(2)(3)
CKR06BX822K(2)(3)
CKR06BX103K(2)(3)
CKR06BX103M(2)(3)
1201(3)
1202(3)
1203(3)
1204(3)
1206(3)
1207(3)
1208(3)
1209(3)
1210(3)
1211(3)
1212(3)
1213(3)
1214(3)
1215(3)
1216(3)
1217(3)
1218(3)
1219(3)
1241(3) 1281(3) 1321(3)
1242(3) 1282(3) 1322(3)
1243(3) 1283(3) 1323(3)
1244(3) 1284(3) 1324(3)
1246(3) 1286(3) 1326(3)
1247(3) 1287(3) 1327(3)
1248(3) 1288(3) 1328(3)
1249(3) 1289(3) 1329(3)
1250(3) 1290(3) 1330(3)
1251(3) 1291(3) 1331(3)
1252(3) 1292(3) 1332(3)
1253(3) 1293(3) 1333(3)
1254(3) 1294(3) 1334(3)
1255(3) 1295(3) 1335(3)
1256(3) 1296(3) 1336(3)
1257(3) 1297(3) 1337(3)
1258(3) 1298(3) 1338(3)
1259(3) 1299(3) 1339(3)
100 VOLT — C062/C066 SIZE (MILITARY—CK06 or CKR06)
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C06(4)(1)123K1X5C(2)
C06(4)(1)153K1X5C(2)
C062K153M1X5CA
C06(4)(1)183K1X5C(2)
C06(4)(1)223K1X5C(2)
C062K223M1X5CA
C06(4)(1)273K1X5C(2)
C06(4)(1)333K1X5C(2)
C062K333M1X5CA
C06(4)(1)393K1X5C(2)
C06(4)(1)473K1X5C(2)
C062K473M1X5CA
C06(4)(1)563K1X5C(2)
C06(4)(1)683K1X5C(2)
C062K683M1X5CA
C06(4)(1)823K1X5C(2)
C06(4)(1)104K1X5C(2)
C062K104M1X5CA
CK06BX123K
CK06BX153K
CK06BX153M
CK06BX183K
CK06BX223K
CK06BX223M
CK06BX273K
CK06BX333K
CK06BX333M
CK06BX393K
CK06BX473K
CK06BX473M
CK06BX563K
CK06BX683K
CK06BX683M
CK06BX823K
CK06BX104K
CK06BX104M
CKR06BX123K(2)(3)
1231(3)
1220(3)
1271(3) 1311(3) 1351(3)
1260(3) 1300(3) 1340(3)
CKR06BX153K(2)(3)
CKR06BX183K(2)(3)
CKR06BX223K(2)(3)
1221(3)
1222(3)
1261(3) 1301(3) 1341(3)
1262(3) 1302(3) 1342(3)
CKR06BX273K(2)(3)
CKR06BX333K(2)(3)
1232(3)
1223(3)
1272(3) 1312(3) 1352(3)
1263(3) 1303(3) 1343(3)
CKR06BX393K(2)(3)
CKR06BX473K(2)(3)
1224(3)
1225(3)
1264(3) 1304(3) 1344(3)
1265(3) 1305(3) 1345(3)
CKR06BX563K(2)(3)
CKR06BX683K(2)(3)
1226(3)
1227(3)
1266(3) 1306(3) 1346(3)
1267(3) 1307(3) 1347(3)
CKR06BX823K(2)(3)
CKR06BX104K(2)(3)
1229(3)
1230(3)
1269(3) 1309(3) 1349(3)
1270(3) 1310(3) 1350(3)
50 VOLT — C062/C066 SIZE (MILITARY—CK06 or CKR06)
120,000
150,000
150,000
180,000
220,000
220,000
270,000
330,000
330,000
390,000
470,000
470,000
560,000
680,000
680,000
820,000
1,000,000
1,000,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C06(4)(1)124K5X5C(2)
C06(4)(1)154K5X5C(2)
C062K154M5X5CA
C06(4)(1)184K5X5C(2)
C06(4)(1)224K5X5C(2)
C062K224M5X5CA
C06(4)(1)274K5X5C(2)
C06(4)(1)334K5X5C(2)
C062K334M5X5CA
C06(4)(1)394K5X5C(2)
C06(4)(1)474K5X5C(2)
C062K474M5X5CA
C06(4)(1)564K5X5C(2)
C06(4)(1)684K5X5C(2)
C062K684M5X5CA
C06(4)(1)824K5X5C(2)
C06(4)(1)105K5X5C(2)
C062K105M5X5CA
CK06BX124K
CK06BX154K
CK06BX154M
CK06BX184K
CK06BX224K
CK06BX224M
CK06BX274K
CK06BX334K
CK06BX334M
CK06BX394K
CK06BX474K
CK06BX474M
CK06BX564K
CK06BX684K
CK06BX684M
CK06BX824K
CK06BX105K
CK06BX105M
CKR06BX124K(2)(3)
1233(3)
1234(3)
1273(3) 1313(3) 1353(3)
1274(3) 1314(3) 1354(3)
CKR06BX154K(2)(3)
CKR06BX184K(2)(3)
CKR06BX224K(2)(3)
1235(3)
1236(3)
1275(3) 1315(3) 1355(3)
1276(3) 1316(3) 1356(3)
CKR06BX274K(2)(3)
CKR06BX334K(2)(3)
1237(3)
1238(3)
1277(3) 1317(3) 1357(3)
1278(3) 1318(3) 1358(3)
CKR06BX394K(2)(3)
CKR06BX474K(2)(3)
1239(3)
1240(3)
1279(3) 1319(3) 1359(3)
1280(3) 1320(3) 1360(3)
CKR06BX564K(2)(3)
CKR06BX684K(2)(3)
1404(3)
1405(3)
1408(3) 1412(3) 1416(3)
1409(3) 1413(3) 1417(3)
CKR06BX824K(2)(3)
CKR06BX105K(2)(3)
1406(3)
1407(3)
1410(3) 1414(3) 1418(3)
1411(3) 1415(3) 1419(3)
(1) Insert proper letter for specification: K — MIL-C-11015; T — MIL-PRF-39014.
(2) Failure Rate Designator: A — Not applicable (MIL-C-11015); M — 1%/1000 Hours, P — .1%/1000 Hours, R — .01%/1000 Hours, S — .001%/1000 Hours (MIL-PRF-39014)
(3) Add “V” for stand-off design (C066). Leave blank for the flat bottom design (C062).
(4) Insert “2” for standard design (Style C062). Insert “6” for stand-off design (Style C066). Note: Stand-offs are available only with the CKR, not the CK.
18
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Axial
Lead Tape and Reel Packaging
Figure 1
KEMET offers standard reeling of Molded and Conformally
Coated Axial Leaded Ceramic Capacitors for automatic insertion
or lead forming machines per EIA specification RS-296. KEMET’S
internal specification four-digit suffix, 7200, is placed at the end of
the part number to designate tape and reel packaging, ie:
C114T103K5X5CR7200.
KEMET®
Paper (50 lb.) test minimum is inserted between the layers of
capacitors wound on reels for component pitch ≤ 0.400".
Capacitor lead length may extend only a maximum of .0625"
(1.59mm) beyond the tapes' edges. Capacitors are centered in a
row between the two tapes and will deviate only
0.031
(0.79mm) from the row center. A minimum of 36" (91.5 cm) leader
tape is provided at each end of the reel capacitors. Universal
splicing clips are used to connect the tape. Standard reel
quantities are shown on page 21.
KEMET®
Adhesive Tape
Adhesive Tape
Kraft Paper
Interleaving
Figure 2
Figure 3
10.5" - 14"
(26.67 -
35.56cm)
.059" to .315"
Greater Than
Component
Length
*
.047" Max
(1.20)
Hub
See Table 1 (A)
1
3 / "
4
*
(82.6)
.655" 0.010"
(16.6 0.25)
1
/ "
8
.250" Nom.
(6.35)
(3.18)
See Table 1
(B)
Dimensions in Inches & (Millimeters)
Table 1
Component
Body Diameter
Component
Pitch "A"
Inside Tape Spacing "B"
1.5mm (0.059")
0.020" or ( 0.5mm)
I
III*
0" (0mm) to 0.197" (5mm)
0.197" or (5mm)
0.394" or (10mm)
2.062" (52.4mm)
0.197" (5.01mm) to 0.394: (10mm)
2.874" (73mm)
19
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Radial
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally
Coated Radial Leaded Ceramic Capacitors for automatic
insertion per EIA specification RS-468. Parts are taped to a
tagboard carrier strip, and wound on a reel as shown in
Figure 1. Kraft paper interleaving is inserted between the
layers of capacitors on the reel. Ammopack is also available,
with the same lead tape configuration and package quantities.
Figure 1
KEMET®
Carrier Strip
12"
(30.48 cm)
.059" to .315"
Greater Than
Over All
*
Height
KEMET®
of Taped
Components
Adhesive Tape
Hub
1
Kraft Paper
Interleaving
Carrier Tape
3 / "
4
(82.6)
.655" 0.010"
(16.6 0.25)
1
/ "
8
(3.18)
(Note: Non-standard lead lengths
available in bulk only.)
Figure 3: Standard Reel
CK06**
CK05**
C056**
C066**
CKR06** CKR05**
C062**
C052**
∆H
P
2
P
1MM Max.
(.039")
H1
D
0
P1
W
2
H
F
H0
W
W
0
Tape
Carrier
W2
L
1
T
* Lead spacings are 2.54mm
(.10") center-to-center.
P
0
** Lead spacings are 5.08mm
(.20") center-to-center.
Figure 2: Lead Tape Configuration (See Table Below)
# See page 15 for exact lead
configuration for Series.
Ceramic Radial Tape and Reel Dimensions in Millimeters & (Inches)
Nominal
mm (inch)
Tolerance
mm (inch)
Nominal
mm (inch)
Tolerance
mm (inch)
Dimension
Symbol
Dimension
Symbol
Sprocket Hole Diameter
Do
4.0 (.157)
12.7 (.500)
12.7 (.500)
0.2 (.008)
0.3 (.012)
0.3 (.012)
Height to Seating
Plane (formed leads) (2)
Component Alignment
H
0
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) 0.5 (.020) Minimum
Sprocket Hole Pitch
Component Pitch
Lead Spacing (1)
P0
P
∆h
L1
t
4.0 (.157)
1.0 (.039)
0.7 (.051)
1.5 (.059)
18.0 (.709)
5.0 (.197)
3.0 (.118)
0.2 (.008)
Maximum
0.2 (.008)
Maximum
Lead Protrusion
Composite Tape
Thickness
Overall Tape and
Lead Thickness
Carrier Tape Width
F
5.08
(.20)
3.81
2.54
(.10)
5.08
+0.6 -0.2
(+.024 -.008)
0.7 (.028)
Sprocket Hole Center
to Lead Center (1)
Sprocket Hole Center
to Component Center
Height to Seating Plane
(straight leads) (2)
P1
P2
H
T
(.150)
(.200)
6.35 (.250)
1.3 (.051)
W
W0
W2
+1.0 - 0.5
(+.039 -.020)
Minimum
Hold-Down Tape
Width
Hold-Down Tape
Location
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) 0.5 (.020) Minimum
32.2 (1.27) Maximum
Component Height
Above Tape Center
H1
Maximum
(1) Measured at the egress from the carrier tape, on the component side.
(2) Determined by a 4 digit suffix placed at the end of the part number, as follows:
7301 =
7303 =
Recommended for parts with formed leads.
Recommended for parts with straight leads.
20
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC LEADED
PACKAGING INFORMATION
CERAMIC PACKAGING
Standard (1)
Bulk
Quantity
Ammo
Pack
Quantity
Standard
Reel
Quantity
KEMET
Series
Military
Style
Military
Specification
Reel
Size
C114C-K-G
C124C-K-G
C192C-K-G
C202C-K
C222C-K
C052C-K-G
C062C-K-G
C114G
CK12,ꢀCC75
CK13,ꢀCC76
CK14,ꢀCC77
CK15
MIL-C-11015/
MIL-PRF-20
200/Box
200/Box
100/Box
25/Box
5000
5000
3000
500
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
N/A
12"
12"
12"
12"
12"
12"
12"
CK16
10/Tray
300
CK05,ꢀCC05
CK06,ꢀCC06
CCR75
100/Bag
100/Bag
200/Box
200/Box
100/Box
25/Box
2000
1500
2000
1500
5000
5000
3000
500
MIL-PRF-20
C124G
CCR76
C192G
CCR77
C202G
CC78-CCR78
CC79-CCR79
CCR05
C222G
10/Tray
300
C052/56G
C062/66G
C512G
100/Bag
100/Bag
Footnoteꢀ(2)
Footnoteꢀ(2)
200/Box
200/Box
100/Box
25/Box
1700
1500
N/A
CCR06
CC07-CCR07
CC08-CCR08
CKR11
C522G
N/A
C114T
MIL-PRF-39014
5000
5000
3000
500
C124T
CKR12
C192T
CKR14
C202T
CKR15
C222T
CKR16
10/Tray
300
C052/56T
C062/66T
CKR05
100/Bag
100/Bag
1700
1500
CKR06
NOTE:ꢀ(1)ꢀStandardꢀpackagingꢀrefersꢀtoꢀnumberꢀofꢀpiecesꢀperꢀbag,ꢀtrayꢀorꢀvial.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ(2)ꢀQuantityꢀvaries.ꢀForꢀfurtherꢀdetails,ꢀpleaseꢀconsultꢀtheꢀfactory.
21
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明