C1206C224K3RAL7800 [KEMET]
Cap,Ceramic,220nF,25VDC,10% -Tol,10% +Tol,X7R TC Code,-15,15% TC,1206 Case;
| 型号： | C1206C224K3RAL7800 |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Cap,Ceramic,220nF,25VDC,10% -Tol,10% +Tol,X7R TC Code,-15,15% TC,1206 Case 电容器 |
| 文件： | 总7页 (文件大小：1280K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CERAMIC CHIP/CAPACITORS
Tin Lead L Termination
FEATURES
KEMET’s line of TinꢁLead termination commercial MLCC surface mount capacitors are designed to meet the needs of the
commercial, high reliability, and military customer applications where TinꢁLead plating is required. KEMET’s TinꢁLead elec-
troplating process is designed to meet a 5ꢀ minimum lead content in the termination of the component. As the bulk of the
electronics industry marches to RoHS compliance it is important that KEMET provide the TinꢁLead terminated products for
our valued high reliability and military customers.
KEMET Tin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard
KEMET TiinꢁLead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard
capacitance values in X7R and C0G dielectrics. Voltage ratings range from 6.3V to 200V. To order the Tin/Lead terminations
th
capacitance values in X7R, X5R, C0G dielectrics. Voltage ratings range from 6.±V to 200V. To order the TinꢁLead termina-
indicate an “L” in the 14 digit of the part number. To request the L Series termination for other surface mount product lines (Open
tions indicate an “L” in the 14th digit of the part number. For additional dielectrics and voltage ratings please contact the fac-
Mode, High Voltage, Arrays, etc.) or for additional dielectrics and higher voltage ratings, please contact the factory or local Sales
tory or local Sales personnel.
representative.
CAPACITOR OUTLINE DRAWINGS
L
Sn/Pb PLATE
W
T
B
NICKEL PLATE
CONDUCTIVE METALLIZATION
S
ELECTRODES
DIMENSIONS—MILLIMETERS AND (INCHES)
S
EIA SIZE
CODE
METRIC
SIZE CODE
T
MOUNTING
TECHNIQUE
L - LENGTH
W - WIDTH
B - BANDWIDTH
SEPARATION
minimum
THICKNESS
0201*
0402*
0603
0805*
1206*
1210*
1808
1812
1825*
2220
2225
0603
1005
1608
2012
3216
3225
4520
4532
4564
5650
5664
0.6 (.024) ± .03 (.001)
1.0 (.04) ± .05 (.002)
1.6 (.063) ± .15 (.006)
2.0 (.079) ± .20 (.008)
3.2 (.126) ± .20 (.008)
3.2 (.126) ± .20 (.008)
4.5 (.177) ± .30 (.012)
4.5 (.177) ± .30 (.012)
4.5 (.177) ± .30 (.012)
5.6 (.220) ± .40 (.016)
5.6 (.220) ± .40 (.016)
0.3 ± (.012) ± .03 (.001)
0.5 (.02) ± .05 (.002)
0.8 (.032) ± .15 (.006)
1.25 (.049) ± .20 (.008)
1.6 (.063) ± .20 (.008)
2.5 (.098) ± .20 (.008)
2.0 (.079) ± .20 (.008)
3.2 (.126) ± .30 (.012)
6.4 (.252) ± .40 (.016)
5.0 (.197) ± .40 (.016)
6.3 (.248) ± .40 (.016)
0.15 (.006) ± .05 (.002)
0.20 (.008) -.40 (.016)
0.35 (.014) ± .15 (.006)
0.50 (.02) ± .25 (.010)
0.50 (.02) ± .25 (.010)
0.50 (.02) ± .25 (.010)
0.60 (.024) ± .35 (.014)
0.60 (.024) ± .35 (.014)
0.60 (.024) ± .35 (.014)
0.60 (.024) ± .35 (.014)
0.60 (.024) ± .35 (.014)
N/A
0.3 (.012)
0.7 (.028)
0.75 (.030)
N/A
Solder Reflow
Solder Wave +
or
Solder Reflow
See page 78
for thickness
dimensions.
N/A
N/A
N/A
Solder Reflow
N/A
N/A
N/A
* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 060±, and 0805 packaged in bulk cassette, see page 96.)
† For extended value 1210 case size – solder reflow only.
(Standard Chips - For
Military see page 87)
CAPACITOR ORDERING INFORMATION
C 0805 C 103 K 5 R A L*
CERAMIC
SIZE CODE
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
END METALLIZATION
L - SnPb plated nickel barrier
(SnPb 5ꢀ minimum)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±±0 PPMꢁ/C)
R – X7R (±15ꢀ) (-55/C ꢂ 125/C)
P – X5R (±15ꢀ) (-55/C ꢂ 85/C)
VOLTAGE
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)
(Example: 2.2pF = 229 or 0.50 pF = 508)
CAPACITANCE TOLERANCE
B – ±0.10pF J – ±5ꢀ
C – ±0.25pF K – ±10ꢀ
1 - 100V
2 - 200V
5 - 50V
6 - 35V
± - 25V
4 - 16V
8 - 10V
9 - 6.±V
D – ±0.5pF
F – ±1ꢀ
G – ±2ꢀ
M – ±20ꢀ
* Part Number Example: C0805C103K5RAL (14 digits - no spaces)
Refer to pages 73-76 for NP0/C0G, X7R and X5R dielectric capacitance ranges available.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
77
CERAMIC CHIP CAPACITORS
Thickness Code Reference Chart
Packaging Quantity Based on Finished Chip Thickness Specifications
Thickness
Code
Chip
Size
Chip Thickness
Range (mm)
Qty per Reel
7" Plastic
Qty per Reel
13" Plastic
Qty per Reel
7" Paper
Qty per Reel
13" Paper
Qty per Bulk
Cassette
AA
BB
CB
CC
CD
DB
DC
DD
DE
DF
DG
DH
DJ
DK
DL
EB
EC
ED
EE
EF
EG
EH
EJ
0201
0402
0603
0603
0603
0805
0805
0805
0805
0805
0805
0805
0805
0805
0805
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1808
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1825
1825
1825
1825
1825
2220
2220
2220
2220
2220
2220
2220
2220
2225
2225
2225
2225
0.30 ± 0.03
0.50 ± 0.05
0.80 ± 0.07
0.80 ± 0.10
0.80 ± 0.15
0.60 ± 0.10
0.78 ± 0.10
0.90 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.25 ± 0.20
1.25 ± 0.20
1.25 ± 0.15
0.95 ± 0.10
0.78 ± 0.10
0.90 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.20 ± 0.15
1.60 ± 0.15
1.60 ± 0.20
1.70 ± 0.20
0.80 ± 0.10
1.15 ± 0.15
1.25 ± 0.15
0.95 ± 0.10
0.78 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.55 ± 0.15
1.85 ± 0.20
2.10 ± 0.20
1.40 ± 0.15
1.70 ± 0.20
1.85 ± 0.20
1.50 ± 0.20
1.60 ± 0.20
2.50 ± 0.22
2.25 ± 0.20
2.50 ± 0.20
1.90 ± 0.20
0.90 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.30 ± 0.10
1.50 ± 0.10
1.55 ± 0.10
1.40 ± 0.15
1.70 ± 0.15
1.60 ± 0.20
1.90 ± 0.20
2.00 ± 0.20
1.70 ± 0.20
2.50 ± 0.20
1.10 ± 0.15
1.15 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.50 ± 0.15
1.00 ± 0.15
1.10 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.50 ± 0.15
1.70 ± 0.15
1.80 ± 0.15
2.40 ± 0.15
1.00 ± 0.15
1.10 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10,000
10,000
10,000
10,000
N/A
15,000
10,000
4,000
4,000
4,000
4,000
4,000
4,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
50,000
10,000
10,000
10,000
10,000
10,000
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
50,000
15,000
N/A
N/A
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2,500
2,500
2,500
2,500
3,000
3,000
4,000
4,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2,000
2,500
4,000
4,000
4,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,500
2,000
1,000
1,500
4,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
N/A
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
N/A
8,000
4,000
4,000
10,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
N/A
EK
EL
EM
EN
FB
FC
FD
FE
FF
FG
FH
FJ
FK
FL
FM
FN
FO
FP
FQ
FR
FS
FT
LD
GB
GC
GD
GE
GF
GG
GH
GJ
GK
GL
GM
GN
GO
HB
HC
HD
HE
HF
JB
JC
JD
JE
JF
JG
JH
JO
KB
KC
KD
KE
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
2,000
4,000
4,000
4,000
4,000
1,000
1,000
1,000
1,000
This chart refers to ceramic chip thickness codes on pages 73 – 76.
Note: TU suffix represents tape and reel packaging of unmarked components.
Note: TM suffix represents tape and reel packaging of marked components.
Cases sizes d1210 are 8mm tape with 4mm pitch and Case Sizes >1210 are 12mm tape and 8mm pitch.
This ch
art refers to ceramic chip thickness codes on pages 73-76.
78
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
KEMET offers Multilayer Ceramic Chip Capacitors
packaged in 8mm and 12mm plastic tape on 7" and
13" reels in accordance with EIA standard 481-1:
Taping of surface mount components for automatic
handling. This packaging system is compatible with all
tape fed automatic pick and place systems. See page 78
for details on reeling quantities for commercial chips
and page 87 for MIL-PRF-55681 chips.
Anti-Static Reel
®
Embossed Carrier*
Chip Orientation
0402 and 0603 case sizes
in Pocket
KEMET
available on punched paper only.
(except 1825 Commercial, and 1825 & 2225 Military)
Embossment
8mm ± .30
(.315 ± .012")
Anti-Static Cover Tape
178mm (7.00")
or
330mm (13.00")
or
(.10mm (.004") Max Thickness)
12mm ± .30
(.472 ± .012")
* Punched paper carrier used for 0402 and 0603 case size.
Case Sizes ≤ 1210 are 8 mm tape with 4 mm pitch.
Case Sizes >1210 are 12 mm tape with 8 mm pitch.
Note: TU suffix represents tape and reel packaging of unmarked components.
TM suffix represents tape and reel packaging of marked components.
SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM
Reflow Solder
Wave Solder
Y(ref) Smin
Grid
Placement
Dimension
0402
Z
G
X
Y(ref) C(ref)
Z
G
X
Not Recommended
2.14 0.28 0.74 0.93 1.21
2.78 0.68 1.08 1.05 1.73
3.30 0.70 1.60 1.30 2.00
4.50 1.50 2.00 1.50 3.00
4.50 1.50 2.90 1.50 3.00
5.90 2.30 3.70 1.80 4.10
5.90 2.30 6.90 1.80 4.10
7.00 3.30 5.50 1.85 5.15
7.00 3.30 6.80 1.85 5.15
Courtyard
0603
3.18 0.68 0.80 1.25 1.93
3.70 0.70 1.10 1.50 2.20
4.90 1.50 1.40 1.70 3.20
4.90 1.50 2.00 1.70 3.20
C
0805
1206
1210
1812
1825
X
Not Recommended
2220
2225
Calculation Formula
Z = Lmin + 2Jt + Tt
G = Smax - 2Jh -Th
G
Y
Z
X = Wmin + 2Js + Ts
Tt, Th, Ts = Combined tolerances
93
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 Newton to 1.0 Newton (10g to 100g)
12 mm
0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165ꢀ to 180ꢀ from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 10 mm/minute.
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13” reels are preferred.
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
E
P0
P2
T Max
T1 Max
8 mm
and
12 mm
1.5
+0.10 -0.0
(0.059
1.75 0.10
4.0 0.10
2.0 0.05
0.600
0.100
(0.069 0.004) (0.157 0.004) (0.079 0.002) (0.024)
(0.004)
+0.004, -0.0)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Max.
Note 1
D1 Min.
Note 2
F
P1
R Min. T2 Max
Note 3
W
A0B0K0
Note 4
8 mm
Single
4.4
1.0
3.5 0.05
4.0 0.10
25.0
2.5
8.0 0.30
(4 mm)
(0.173)
(0.039) (0.138 0.002) (0.157 0.004) (0.984) (0.098) (.315 0.012)
12 mm
Double
(8 mm)
8.2
(0.323)
1.5 5.5 0.05 8.0 0.10 30.0 4.6 12.0 0.30
(0.059) (0.217 0.002) (0.315 0.004) (1.181) (0.181) (0.472 0.012)
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro-
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Embossed Carrier Tape Configuration (cont.)
20°
Sketch D: Tape Camber (Top View)
1mm (0.039) Max.
1mm (0.039) Max.
250mm (9.843)
Allowable camber to be 1 mm/250 mm.
400mm (15.75) Min.
Figure 2:
Tape Leader
& Trailer
Dimensions
(Metric
Dimensions
Will Govern)
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Table 2 – REEL DIMENSIONS (Metric will govern)
Tape Size
A Max
B* Min
C
D* Min
N Min
W1
W2 Max
W3
8 mm
330.0
(12.992)
1.5
13.0 0.20
20.2
(0.795)
50.0
(1.969)
See
8.4
+1.5, -0.0
(0.331
14.4
(0.567)
7.9 Min
(0.311)
10.9 Max
(0.429)
(0.059) (0.512 0.008)
Note 3
+0.059, -0.0)
12 mm
330.0
(12.992)
1.5
13.0 0.20
20.2
(0.795)
Table 1
12.4
+2.0, -0.0
(0.488
18.4
(0.724)
11.9 Min
(0.469)
15.4 Max
(0.606)
(0.059) (0.512 0.008)
+0.078, -0.0)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
95
CERAMIC CHIP CAPACITORS
Packaging Information
Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):
10 pitches cumulative
P0
tolerance on tape
± 0.2 (± 0.008)
T
D0
P2
E
Top
Tape
Cover
A0
Bottom
Tape
Cover
F
W
B0
G2
T1
P1
Center lines
of cavity
Max. Cavity Size
See Note 1
Table 1
User Direction of Feed
Table 1: 8 & 12mm PunchedTape
(Metric Dimensions Will Govern)
Constant Dimensions - Millimeters (Inches)
Tape
Size
D
P
P
T
G
G
2
E
R Min.
0
0
2
1
1
8mm
and
12mm
1.5
1.75 ± 0.10
4.0 ± 0.10
2.0 ± 0.05
0.10 0.75 0.75 25 (.984)
(.004) (.030) (.030) See Note 2
+0.10, -0.0
(.059
(.069 ± 0.004) (.157 ± 0.004) (.079 ± 0.002) Max. Min. Min.
Table 1
+0.004, -0.0)
Table 1: 8 & 12mm PunchedTape
(Metric Dimensions Will Govern)
Variable Dimensions - Millimeters (Inches)
Tape
Size
P
W
A B
0 0
T
F
1
8mm
1/2
2.0 ± 0.10
1.1mm (.043)
Max. for Paper
Base Tape and
1.6mm (.063)
Max. for Non-
Paper Base
(.079 ± .004)
3.5 ± 0.05
8.0 ± ±0.3
See Note 1
Table 1
Pitch See Require-
ments
(.138 ± .002)
(.315 ± ±0.012)
Section 3.3 (d)
8mm
4.0 ± 0.10
(0.157 ± .004)
Compositions.
See Note 3.
12mm
12mm
4.0 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
(0.157 ± .004)
8.0 ± 0.10
(.217 ± .002)
(.472 ± .012)
Double (0.315 ± .004)
Pitch
Note:
1. A , B and T determined by the maximum dimensions to the ends of the terminals extending from the
0
0
body and/or the body dimensions of the component. The clearance between the ends of the terminals or
body of the component to the sides and depth of the cavity (A , B and T) must be within 0.05mm (.002)
0
0
minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component
within the cavity of not more than 20 degrees (see sketches A and B).
2. Tape with components shall pass around radius "R" without damage.
3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum.
Sketch C:
Component Rotation - Top View
Maximum
Sketch B:
R
(Min.)
Max. Component
Rotation - Front
component rotation.
Sketch A:
Bending Radius
See Note 2
Table 1
20°
Cross Sectional View
Typical
component
center line
20°
96
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Packaging Information
Table 2 – Capacitance Values Available
In Bulk Cassette Packaging
Bulk Cassette Packaging (Ceramic Chips only)
(Meets Dimensional Requirements IEC-286-6 and EIAJ 7201)
Min. Max.
Cap Cap
Size Dielectric Voltage Value Value
Case
53.3*
Unit: mm
* Reference
0402
0603
0805
All
All
All
All
All
All
All
All
0.1
10*
1.5 ±
2.0 ±
3.0 ±
0
0
0.1
0.2
0
C0G
200
100
50
109 181
109 331
109 102
X7R
Y5V
200
100
50
221 392
221 103
221 273
221 104
221 104
25
16
25
16
104 224
104 224
5.0*
110 ± 0.7
Table 1 – Capacitor Dimensions for Bulk
Cassette Packaging – Millimeters
Metric EIA
Size Size
Code Code
Minimum
Length
L
Width
W
Thickness Bandwidth Separation
Number of
Pcs/Cassette
T
B
S
1005 0402 1.0 ± 0.05 0.5 ± 0.05
1608 0603 1.6 ± 0.07 0.8 ± 0.07
0.5 ± .05
0.8 ± .07
0.2 to 0.4
0.2 to 0.5
0.5 to 0.75
0.3
50,000
15,000
10,000
0.7
2012 0805 2.0 ± 0.10 1.25 ± 0.10 0.6 ± .10
0.75
Terminations: KEMET nickel barrier layer with a tin overplate.
CAPACITOR MARKING TABLE
(Marking Optional - Not Available
for 0402 Size or Y5V Dielectric)
Capacitance (pF) For Various Numeral Identifiers
Numeral
Laser marking is available as an extra-cost option for
most KEMET ceramic chips. Such marking is two
sided, and includes a K to identify KEMET, followed by
two characters (per EIA-198 - see table below) to
identify the capacitance value. Note that marking is
not available for size 0402 nor for any Y5V chip. In
addition, the 0603 marking option is limited to the K
only.
Alpha
9
0
1
2
3
4
5
6
7
Character
A
B
C
D
E
F
G
H
J
0.10 1.0 10 100 1000 10,000 100,000 1,000,000 10,000,000
0.11 1.1 11 110 1100 11,000 110,000 1,100,000 11,000,000
0.12 1.2 12 120 1200 12,000 120,000 1,200,000 12,000,000
0.13 1.3 13 130 1300 13,000 130,000 1,300,000 13,000,000
0.15 1.5 15 150 1500 15,000 150,000 1,500,000 15,000,000
0.16 1.6 16 160 1600 16,000 160,000 1,600,000 16,000,000
0.18 1.8 18 180 1800 18,000 180,000 1,800,000 18,000,000
0.20 2.0 20 200 2000 20,000 200,000 2,000,000 20,000,000
0.22 2.2 22 220 2200 22,000 220,000 2,200,000 22,000,000
0.24 2.4 24 240 2400 24,000 240,000 2,400,000 24,000,000
0.27 2.7 27 270 2700 27,000 270,000 2,700,000 27,000,000
0.30 3.0 30 300 3000 30,000 300,000 3,000,000 30,000,000
0.33 3.3 33 330 3300 33,000 330,000 3,300,000 33,000,000
0.36 3.6 36 360 3600 36,000 360,000 3,600,000 36,000,000
0.39 3.9 39 390 3900 39,000 390,000 3,900,000 39,000,000
0.43 4.3 43 430 4300 43,000 430,000 4,300,000 43,000,000
0.47 4.7 47 470 4700 47,000 470,000 4,700,000 47,000,000
0.51 5.1 51 510 5100 51,000 510,000 5,100,000 51,000,000
0.56 5.6 56 560 5600 56,000 560,000 5,600,000 56,000,000
0.62 6.2 62 620 6200 62,000 620,000 6,200,000 62,000,000
0.68 6.8 68 680 6800 68,000 680,000 6,800,000 68,000,000
0.75 7.5 75 750 7500 75,000 750,000 7,500,000 75,000,000
0.82 8.2 82 820 8200 82,000 820,000 8,200,000 82,000,000
0.91 9.1 91 910 9100 91,000 910,000 9,100,000 91,000,000
0.25 2.5 25 250 2500 25,000 250,000 2,500,000 25,000,000
0.35 3.5 35 350 3500 35,000 350,000 3,500,000 35,000,000
0.40 4.0 40 400 4000 40,000 400,000 4,000,000 40,000,000
0.45 4.5 45 450 4500 45,000 450,000 4,500,000 45,000,000
0.50 5.0 50 500 5000 50,000 500,000 5,000,000 50,000,000
0.60 6.0 60 600 6000 60,000 600,000 6,000,000 60,000,000
0.70 7.0 70 700 7000 70,000 700,000 7,000,000 70,000,000
0.80 8.0 80 800 8000 80,000 800,000 8,000,000 80,000,000
0.90 9.0 90 900 9000 90,000 900,000 9,000,000 90,000,000
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
Example shown is 1,000 pF capacitor.
KA3
y
97
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明