C1206C475M8RAC [KEMET]

Surface Mount Ceramic Chip Capacitors X7R Dielectric; 表面贴装陶瓷贴片电容X7R电介质


型号：	C1206C475M8RAC
厂家：	KEMET CORPORATION
描述：	Surface Mount Ceramic Chip Capacitors X7R Dielectric 表面贴装陶瓷贴片电容X7R电介质电容器固定电容器
文件：	总2页 (文件大小：31K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

New Product Bulletin

Surface Mount Ceramic Chip Capacitors

X7R Dielectric

X7R/1206 - 2.7 µF (275) - 10.0 µF (106) @ 6.3; 10 Volts

Outline Drawing

Table 1

Dimensions - Millimeters (Inches)

Metric

Size Code Code

3216 1206

EIA Size

Max.

T - Thickness

See Table 2

L - Length

W - Width

B - Bandwidth

0.5 (.02) ± 0.25 (.010)

Separation

3.2 (.126) ± 0.2 (.008) 1.6 (.063) ± 0.2 (.008)

N/A

Table 2 - X7R - Capacitance Value Extensions

Capacitance

Values (µF)

KEMET Part

Number

Capacitance Thickness

Qty

7” Reel

Qty

13” Reel

Tolerance

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10.0

C1206C275(1)(2)RAC

C1206C335(1)(2)RAC

C1206C395(1)(2)RAC

C1206C475(1)(2)RAC

C1206C565(1)(2)RAC

C1206C685(1)(2)RAC

C1206C825(1)(2)RAC

C1206C106(1)(2)RAC

K,M

0.95 ± 0.1

1.0 ± 0.1

1.15 ± 0.15

1.25 ± 0.15

1.6 ± 0.2

4,000

2,500

2,000

10,000

8,000

(1) To complete KEMET part number, insert the alpha code for tolerance desired. K = ±10%; M = ±20%

(2) To complete KEMET part number, insert the numeric code for voltage desired. 9 = 6.3 volts; 8 = 10 volts

F-9025 2/05

Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific

requirements based on room temperature (25°C) parameters:

• Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range

• Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 500

megohm-microfarads.

• Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms. DF Limit for 6.3 and 10

volts is 5.0%. DF for 16 volt is 3.5%.

Soldering Process

The 1206 components are suitable for reflow and wave soldering. All parts incorporate the stan-

dard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solder-

ability as well as resistance to leaching.

Marking

These chips are normally supplied unmarked. If required, they can be laser marked as an extra

cost option. More detail on the marking format is included in our Surface Mount Catalog F3102.

In general, the information in the KEMET Surface Mount catalog F3102 applies to these

capacitors. The information in this bulletin supplements that in the catalog.

相关型号：