F844RH104K440C [KEMET]
Metallized Polypropylene Film EMI Suppression Capacitors;
| 型号： | F844RH104K440C |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Metallized Polypropylene Film EMI Suppression Capacitors |
| 文件： | 总14页 (文件大小：1747K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Overview
Applications
The PHE844 Series is constructed of metallized polypropylene
filmꢀencapsulatedꢀwithꢀself-extinguishingꢀresinꢀinꢀaꢀboxꢀofꢀmaterialꢀ
meeting the requirements of UL 94 V–0.
For use as a electromagnetic interference (EMI) suppression
filterꢀinꢀacross-the-lineꢀapplicationsꢀrequiringꢀX1ꢀsafetyꢀ
classification.ꢀSuitableꢀforꢀuseꢀinꢀsituationsꢀwhereꢀfailureꢀofꢀtheꢀ
capacitor would not lead to danger of electric shock.
Benefits
• Approvals: ENEC, UL, cUL
• Class X1 (IEC 60384-14)
• Rated Voltage: 440 VAC 50/60 Hz (ENEC), 480VAC
50/60 Hz (UL, cUL)
• Capacitance range: 0.1 – 2.2 µF
• Lead spacing: 22.5 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/105/56/B, IEC 60068-1
• Tape and reel in accordance with IEC 60286-2
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ-40˚Cꢀtoꢀ+105˚C
• 100% screening factory test at 3,000 VDC
• Self-healing properties
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Legacy Part Number System
PHE844
R
D
6100
M
R06L2
Capacitance
Tolerance
Series
Rated Voltage (VAC)
R = 440
Lead Spacing (mm)
Capacitance Code (pF)
Packaging
X1, Metallized
Polypropylene
D = 22.5
F = 27.5
R = 37.5
The last three digits
representꢀsignificantꢀ
figures.ꢀTheꢀfirstꢀdigitꢀ
specifiesꢀtheꢀtotalꢀ
numberꢀofꢀdigits.
K = ±10%
M = ±20%
See Ordering Options
Table
New KEMET Part Number System
F
844
D
H
104
M
440
C
Capacitor
Class
Lead Spacing
(mm)
Capacitance
Tolerance
Rated Voltage
(VAC)
Series
Size Code
Capacitance Code (pF)
Packaging
F = Film
X1, Metallized D = 22.5
Polypropylene F = 27.5
R = 37.5
See
Dimension
Table
First two digits represent
significantꢀfigures.ꢀThirdꢀdigitꢀ M = ±20%
specifiesꢀnumberꢀofꢀzeros.
K = ±10%
440 = 440
See Ordering
OptionsꢀTable
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
1
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Ordering Options Table
Lead
KEMET
Legacy
Spacing
Nominal
(mm)
Lead Length
Lead and
Packaging Packaging
Lead and
Type of Leads and Packaging
(mm)
Code
Code
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
6ꢀ+0/-1
C
R06L2(1)
Other Lead and Packaging Options
Pizza Pack
R06L2(1)
R30L2
R17T0
R17T1
22.5
6ꢀ+0/-1
Z
Bulk (Tray)–Long Leads
30ꢀ+0/-1
ALW0L
Tape & Reel (Standard Reel)
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
H0=ꢀ18.5ꢀ+/-0.5
L
P
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
6ꢀ+0/-1
C
R06L2(1)
Other Lead and Packaging Options
Pizza Pack
27.5
37.5
6ꢀ+0/-1
30ꢀ+0/-1
Z
ALW0L
P
R06L2(1)
R30L2
R17T1
Bulk (Tray)–Long Leads
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
6ꢀ+0/-1
6ꢀ+0/-1
C
Z
R06L2(1)
R06L2(1)
Other Lead and Packaging Options
Pizza Pack
(1) Please specify Bulk (Tray) or Pizza Packaging
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
2
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Dimensions – Millimeters
FRONT VIEW
L
SIDE VIEW
B
H
d
0.5
LL
p
p
B
H
L
d
KEMET Size
Legacy Size
Code
Code
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
DH
DM
DT
DW
DY
FE
D14
D15
D16
D20
D19
F11
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.4
+/-ꢀ0.5
+/-ꢀ0.5
+/-ꢀ0.5
+/-ꢀ0.5
8.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
16.0
18.5
21.5
23.0
24.5
20.5
23.0
24.5
28.0
30.0
24.0
26.0
36.0
38.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
+/-ꢀ0.05
9.0
11.0
13.5
15.5
10.5
13.5
14.5
17.5
21.0
13.0
15.0
19.0
21.0
FK
F03
F13
F14
F16
R05
R04
R03
R06
FM
FR
FV
RF
RH
RM
RP
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
3
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Performance Characteristics
Dielectric
Plates
Polypropyleneꢀfilm
Metalꢀlayerꢀdepositedꢀbyꢀevaporationꢀunderꢀvacuum
Winding
Non-inductive type. Series design.
Leads
Tinned wire
Protection
Plasticꢀcase,ꢀthermosettingꢀresinꢀfilled.ꢀBoxꢀmaterialꢀisꢀsolventꢀresistantꢀandꢀflameꢀretardantꢀaccordingꢀtoꢀUL94.
Rated Voltage (VR)
Capacitance Range
Capacitance Values
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
440 VAC 50/60 Hz (ENEC) - 480 VAC 50/60 Hz (UL,cUL)
0.10 µF to 2.2 µF
E6 series (IEC 60063)
±20% standard, ±10% option
-40°C to 105°C
40/105/56/B IEC 60068-1
ENEC, UL, cUL
Related Documents
EN/IEC 60384-14:2005, UL 60384-14, CAN/CSA E60384-14:09
MaximumꢀValuesꢀatꢀ+23°C
Frequency
1 kHz
Cꢀ≤ꢀ0.1ꢀμF
0.1%
0.1ꢀµFꢀ<ꢀCꢀ≤ꢀ1ꢀµF
C > 1 µF
0.1%
0.8%
-
DissipationꢀFactorꢀ(tanδ)
0.1%
0.4%
-
10 kHz
0.2%
100 kHz
0.6%
The 100% screening factory test is carried out at 3,000 VDC. The voltage level is selected to meet the requirements in
applicableꢀequipmentꢀstandards.ꢀAllꢀelectricalꢀcharacteristicsꢀareꢀcheckedꢀafterꢀtheꢀtest.ꢀItꢀisꢀnotꢀpermittedꢀtoꢀrepeatꢀthisꢀ
testꢀasꢀthereꢀisꢀaꢀriskꢀtoꢀdamageꢀtheꢀcapacitor.ꢀKEMETꢀisꢀnotꢀliableꢀinꢀsuchꢀcaseꢀforꢀanyꢀfailures.
Test Voltage Between Terminals
Resonance Frequency
Tabulatedꢀself-resonanceꢀfrequenciesꢀfoꢀ(seeꢀTableꢀ1ꢀ-ꢀRatingsꢀ&ꢀPartꢀNumberꢀReference)
Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀaccordingꢀtoꢀIECꢀ60384–2
Minimum Values Between Terminals
Insulation Resistance
In DC Applications
Cꢀ≤ꢀ0.33ꢀμF
≥ꢀ30,000ꢀMΩ
Cꢀ>ꢀ0.33ꢀμF
≥ꢀ10,000ꢀMΩꢀ•ꢀµF
Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
4
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Environmental Test Data
Test
IEC Publication
Procedure
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Noꢀvisibleꢀdamage.ꢀNoꢀopenꢀorꢀshortꢀcircuit.
1,000ꢀbumpsꢀatꢀ390ꢀm/s2
Noꢀvisibleꢀdamage.ꢀNoꢀopenꢀorꢀshortꢀcircuit.
Upper and lower rated temperature 5 cycles
Noꢀvisibleꢀdamage.
Endurance
IEC 60384-14:2005
Vibration
Bump
IEC 60068–2–6 Test Fc
IECꢀ60068-2-29ꢀTestꢀEb
IEC 60068-2-14 Test Na
Change of Temperature
ActiveꢀFlammability
PassiveꢀFlammability
Damp Heat Steady State
IEC 60384-14:2005
IEC 60384-14:2005
VRꢀ+ꢀ20ꢀsurgeꢀpulsesꢀatꢀ4ꢀkVꢀ(pulseꢀeveryꢀ5ꢀseconds)
IEC 60384–1, IEC 60695–11–5 Needle Flame Test
+40°Cꢀandꢀ90ꢀ–ꢀ95%ꢀRH,ꢀ56ꢀdays
IECꢀ60068-2-78ꢀTestꢀCab
Approvals
Certification Body
Mark
Specification
File Number
Intertek Semko AB
EN/IEC 60384-14
SE/0140–1C
UL 60384 and
UL
CAN/CSA E60384-14:09
(480 VAC)
E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
5
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Table 1 – Ratings & Part Number Reference
Max Dimensions in mm
Capacitance
Value (µF) (New/Legacy)
Size Code
Lead
fo
dV/dt
New KEMET
Part Number
Legacy Part
Number
Spacing (p) (MHz) (V/µs)
B
H
L
0.10
0.15
0.22
0.33
0.47
0.22
0.33
0.47
0.68
1.0
0.47
0.68
1.0
1.5
2.2
DH/D14
DM/D15
DT/D16
DW/D20
DY/D19
FE/F11
FK/F03
FM/F13
FR/F14
FV/F16
RF/R05
RF/R05
RH/R04
RM/R03
RP/R06
8.0
9.0
16.0
18.5
21.5
23.0
24.5
20.5
23.0
24.5
28.0
30.0
24.0
24.0
26.0
36.0
38.0
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
41.0
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
3.2
2.6
2.1
1.8
1.5
2.2
1.7
1.4
1.1
1.0
1.3
1.1
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
F844DH104(1)440(2)
F844DM154(1)440(2)
F844DT224(1)440(2)
F844DW334(1)440(2)
F844DY474(1)440(2)
F844FE224(1)440(2)
F844FK334(1)440(2)
F844FM474(1)440(2)
F844FR684(1)440(2)
F844FV105(1)440(2)
F844RF474(1)440(2)
F844RF684(1)440(2)
F844RH105(1)440(2)
F844RM155(1)440(2)
F844RP225(1)440(2)
PHE844RD6100(1)(2)
PHE844RD6150(1)(2)
PHE844RD6220(1)(2)
PHE844RD6330(1)(2)
PHE844RD6470(1)(2)
PHE844RF6220(1)(2)
PHE844RF6330(1)(2)
PHE844RF6470(1)(2)
PHE844RF6680(1)(2)
PHE844RF7100(1)(2)
PHE844RR6470(1)(2)
PHE844RR6680(1)(2)
PHE844RR7100(1)(2)
PHE844RR7150(1)(2)
PHE844RR7220(1)(2)
11.0
13.5
15.5
10.5
13.5
14.5
17.5
21.0
13.0
13.0
15.0
19.0
21.0
0.92
0.74
0.60
Capacitance
Value (µF)
Size Code (New/
Legacy)
dV/dt
(V/µs)
New KEMET
Part Number
B (mm)
H (mm)
L (mm)
Lead Spacing (p) fo (MHz)
Legacy Part Number
(1) M = ±20%, K = ±10%.
(2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
6
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increasedꢀtheꢀliquidusꢀtemperatureꢀfromꢀthatꢀofꢀ183ºCꢀforꢀSnPbꢀeutecticꢀalloyꢀtoꢀ217ꢀ–ꢀ221ºCꢀforꢀtheꢀnewꢀalloys.ꢀAsꢀaꢀresult,ꢀtheꢀheatꢀstressꢀ
toꢀtheꢀcomponents,ꢀevenꢀinꢀwaveꢀsoldering,ꢀhasꢀincreasedꢀconsiderablyꢀdueꢀtoꢀhigherꢀpre-heatꢀandꢀwaveꢀtemperatures.ꢀPolypropyleneꢀ
capacitorsꢀareꢀespeciallyꢀsensitiveꢀtoꢀheatꢀ(theꢀmeltingꢀpointꢀofꢀpolypropyleneꢀisꢀ160ꢀ–ꢀ170ºC).ꢀWaveꢀsolderingꢀcanꢀbeꢀdestructive,ꢀespeciallyꢀ
forꢀmechanicallyꢀsmallꢀpolypropyleneꢀcapacitorsꢀ(withꢀleadꢀspacingꢀofꢀ5ꢀmmꢀtoꢀ15ꢀmm),ꢀandꢀgreatꢀcareꢀhasꢀtoꢀbeꢀtakenꢀduringꢀsoldering.ꢀTheꢀ
recommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀKEMETꢀwithꢀanyꢀquestions.ꢀInꢀgeneral,ꢀtheꢀwaveꢀsolderingꢀcurveꢀ
fromꢀIECꢀPublicationꢀ61760-1ꢀEditionꢀ2ꢀservesꢀasꢀaꢀsolidꢀguidelineꢀforꢀsuccessfulꢀsoldering.ꢀPleaseꢀseeꢀFigureꢀ1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀofꢀtheꢀaboveꢀtheꢀ
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-
holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀtheꢀoven,ꢀifꢀthrough-holeꢀ
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitorꢀsurfaceꢀtemperatureꢀtoꢀreturnꢀtoꢀaꢀnormalꢀtemperatureꢀbeforeꢀtheꢀsecondꢀsolderingꢀcycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
200
150
100
50
Firstwave
Second wave
Recommended Soldering Temperature
ΔT <150°C
Cooling
400
Preheating
ca 2°C/s
350
300
250
200
150
100
50
ca 3.5°C/s typical
ca 5°C/s
115°C max
Tpreheat
100°C
Typical
0
0
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
Theꢀsolderingꢀironꢀtipꢀtemperatureꢀshouldꢀbeꢀsetꢀ
atꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀsolderingꢀ
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
7
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1.ꢀTheꢀtableꢀindicatesꢀtheꢀmaximumꢀset-upꢀtemperatureꢀofꢀtheꢀsolderingꢀprocess
Figure 1
Maximum
Maximum Preheat
Peak Soldering
Temperature
Temperature
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
Polypropylene
Paper
130°C
100°C
130°C
130°C
110°C
130°C
130°C
130°C
140°C
270°C
260°C
270°C
270°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
ꢀ Setꢀtheꢀtemperatureꢀsoꢀthatꢀinsideꢀtheꢀelementꢀtheꢀmaximumꢀtemperatureꢀisꢀbelowꢀtheꢀlimit:
Maximum temperature
Dielectric Film Material
measured inside the element
Polyester
Polypropylene
Paper
160°C
110°C
160°C
160°C
Polyphenylene
sulphide
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀcomponentsꢀtoꢀbeꢀ
solderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀflowꢀsolderingꢀwithoutꢀtouchingꢀtheꢀsolder.ꢀWhenꢀtheꢀboardꢀisꢀ
overꢀtheꢀbath,ꢀitꢀisꢀstoppedꢀandꢀpre-designedꢀsolderꢀpotsꢀareꢀliftedꢀfromꢀtheꢀbathꢀwithꢀmoltenꢀsolderꢀonlyꢀatꢀtheꢀplacesꢀofꢀtheꢀselectedꢀ
components,ꢀandꢀpressedꢀagainstꢀtheꢀlowerꢀsurfaceꢀofꢀtheꢀboardꢀtoꢀsolderꢀtheꢀcomponents.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀhowever, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
inꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
8
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Construction
Detailed Cross Section
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
Margin
Leads
Winding Scheme
Single-sided
Metallized
Polypropylene
Film
2 Sections
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015
9
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Marking
FRONT
TOP
RIFA
Logo
Approval
Mark
Series
Rated
Voltage
IEC
Climatic
Category
Capacitance Manufacturing
Capacitance
Tolerance
Date Code
Approval
Mark
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
Month
January
February
March
Code
1
2
3
4
5
6
7
8
9
O
N
D
P
R
April
S
May
T
June
U
July
V
August
September
October
November
December
W
X
A
B
C
D
E
F
H
J
K
L
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015 10
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Packaging Quantities
Bulk
Short
Leads
234
Standard
Large
Reel
Ammo
Bulk
(Pizza)
440
KEMET
Legacy
Lead
Thickness
(mm)
Height
(mm)
Length
(mm)
Reel
Size Code Size Code Spacing
ø 360 mm ø 500 mm
DD
DH
DM
DT
D13
D14
D15
D16
D17
D18
D19
D20
6.5
8.0
14.5
16.0
18.5
21.5
16.5
19.0
24.5
23.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
300
250
250
200
300
200
110
160
600
500
500
400
600
400
250
300
186
352
9.0
308
308
11.0
7.0
253
253
22.5
DF
DR
DY
DW
216
396
10.5
15.5
13.5
264
264
176
176
209
209
FK
FE
FG
FM
FR
FS
FV
FH
FT
FQ
F03
F11
F12
F13
F14
F15
F16
F17
F18
F19
13.5
10.5
11.5
14.5
17.5
19.0
21.0
21.0
31.0
27.5
23.0
20.5
22.5
24.5
28.0
29.0
30.0
12.5
18.5
16.0
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
171
216
198
153
126
117
108
108
72
250
350
300
250
171
216
198
153
126
117
108
108
72
27.5
37.5
81
81
RK
RM
RH
RF
RP
RS
R02
R03
R04
R05
R06
R08
16.5
19.0
15.0
13.0
21.0
28.0
32.0
36.0
26.0
24.0
38.0
43.0
41.0
41.0
41.0
41.0
41.0
41.0
105
91
105
91
119
140
84
119
140
84
54
54
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015 11
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 22.5 – 27.5 mm
0
Taping Specification
Dimensions (mm)
Description
Symbol
Lead Space
Tolerance
22.5
22.5
18
27.5
27.5
18
10
9
Lead spacing
F
+0.6/-0.1
+1/-0.5
Carrier tape width
Hold down tape width
Hole position
W
W0
W1
W2
D0
P0
P1
∆h
∆p
t
10
9
Minimum
+ꢀ0.75/-0.5
Maximum
± 0.2
Hold down tape position
Feed hole diameter
Feed hole lead space*
Centering of the lead wire
Component alignment
Deviation tape – plane
Tape thickness
3
3
4
4
12.7
7.8
2
12.7
5.3
2
± 0.2**
± 0.7
± 2
1.3
0.9
1.3
0.9
Maximum
Maximum
Height of component
from tape center
H0***
18.5
18.5
± 0.5
*Available also 15mm.
**Maximum 1 mm on 20 lead spaces.
*** H0 = 16.5 mm is available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015 12
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg,ꢀGermanyꢀꢀ
Tel: 49-8191-3350800
Tel: 86-10-5877-1075
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Seoul, South Korea
Tel: 82-2-6294-0550
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
Northeast
Wilmington, MA
Tel: 978-658-1663
Penang, Malaysia
Tel: 60-4-6430200
Central
Novi, MI
Tel: 248-306-9353
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015 13
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE844 Series, Class X1, 440/480 VAC, 105°C
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ
verifyingꢀtheꢀextentꢀtoꢀwhichꢀtheꢀInformationꢀcontainedꢀinꢀthisꢀpublicationꢀisꢀapplicableꢀtoꢀanꢀorderꢀatꢀtheꢀtimeꢀtheꢀorderꢀisꢀplaced.
AllꢀInformationꢀgivenꢀhereinꢀisꢀbelievedꢀtoꢀbeꢀaccurateꢀandꢀreliable,ꢀbutꢀitꢀisꢀpresentedꢀwithoutꢀguarantee,ꢀwarranty,ꢀorꢀresponsibilityꢀofꢀanyꢀkind,ꢀexpressedꢀorꢀimplied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀapplications,ꢀbutꢀareꢀ
notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ
byꢀcustomersꢀwhoꢀhaveꢀtheꢀrequisiteꢀexperienceꢀandꢀcapabilityꢀtoꢀdetermineꢀtheꢀcorrectꢀproductsꢀforꢀtheirꢀapplication.ꢀAnyꢀtechnicalꢀadviceꢀinferredꢀfromꢀthisꢀInformationꢀorꢀotherwiseꢀ
providedꢀbyꢀKEMETꢀwithꢀreferenceꢀtoꢀtheꢀuseꢀofꢀKEMET’sꢀproductsꢀisꢀgivenꢀgratis,ꢀandꢀKEMETꢀassumesꢀnoꢀobligationꢀorꢀliabilityꢀforꢀtheꢀadviceꢀgivenꢀorꢀresultsꢀobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur.ꢀAccordingly,ꢀcustomerꢀapplicationsꢀwhichꢀrequireꢀaꢀhighꢀdegreeꢀofꢀreliabilityꢀorꢀsafetyꢀshouldꢀemployꢀsuitableꢀdesignsꢀorꢀotherꢀsafeguardsꢀ(suchꢀasꢀinstallationꢀofꢀprotectiveꢀ
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Althoughꢀallꢀproduct–relatedꢀwarnings,ꢀcautionsꢀandꢀnotesꢀmustꢀbeꢀobserved,ꢀtheꢀcustomerꢀshouldꢀnotꢀassumeꢀthatꢀallꢀsafetyꢀmeasuresꢀareꢀindictedꢀorꢀthatꢀotherꢀmeasuresꢀmayꢀnotꢀ
beꢀrequired.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3108_PHE844_X1_440-480 • 5/15/2015 14
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明