PEG124GA3100QL1 [KEMET]
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 30% +Tol, 10% -Tol, 100uF, Through Hole Mount, AXIAL LEADED;
| 型号： | PEG124GA3100QL1 |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 30% +Tol, 10% -Tol, 100uF, Through Hole Mount, AXIAL LEADED 电容器 |
| 文件： | 总14页 (文件大小：565K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Axial Aluminum Electrolytic Capacitors
PEG124 Series, +105ºC and +125ºC
Overview
KEMET's PEG124 is an electrolytic capacitor with very long-
life and outstanding electrical performance. The device has a
The PEG124 winding is housed in a cylindrical aluminum can with
a high purity aluminum lid and high quality rubber gasket. The
polarized all-welded design, tinned copper wire leads, a negative sealing system is designed for electrolyte leakage-free operation
pole connected to the case, and plastic insulation. long-life
and very high reliability are achieved by dimensioning of the
and a very low gas-diffusion rate of electrolyte. Low ESR is the
result of a low resistive electrolyte/paper system and an all-welded
capacitor, careful selection of materials/methods and discipline in design. Thanks to its mechanical robustness, the PEG124 is also
quality control allowing operation up to +125°C/+105°C.
suitable for use in mobile and aircraft installations.
Applications
Benefits
• Operating temperature of +125°C and +105°C
• Long life, up to 27,500 hours at +105°C
• Low ESR
KEMET's PEG124 is a high performance axial electrolytic
capacitor. Typical applications include smoothing, coupling/
decoupling and energy storage in telecommunication, power
supply system, data processing, process control and measuring
where long life and high reliability are of paramount importance.
• Low ESL
Part Number System
PEG124
E
F
410
0
Q
T1
Capacitance
Tolerance
Series
Voltage (VDC)
Size Code
Capacitance Code (µF)
Version
Packaging
Axial Aluminum E= 10
P = 100
R = 200
U = 350
V = 400
Y = 450
See Dimension Table
The second two digits
indicate the two most
significant digits of the
capacitance value. The
first digit indicates the total
number digits.
0 = Standard
A-Z = High
Performance
Q = -10 +30%
M = ±20%
See Ordering
Options Table
Electrolytic
G = 16
H = 25
K = 40
M = 63
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
1
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Performance Characteristics
Item
Performance Characteristics
1 – 4,700 µF
1 – 470 µF
100 – 450 VDC
-40 to +105°C
Capacitance Range
Rated Voltage
10 – 63 VDC
-40 to +125°C
Operating Temperature
Capacitance Tolerance
Operational Lifetime
Shelf Life
-10/+30%, (-10/+50%, ±20% select values) at 100 Hz/+20°C
27,500 hours at +105°C (hours, D = 20 mm)
5,000 hours at +105°C or 10 years at +40°C 0 VDC +40°C 10 years O VDC
I = 0.01 CV (µA, CV ≤ 1,000)
I = 0.006 CV + 4,000 (µA)
I = 0.003 CV + 4000 (µA, CV > 1,000)
Leakage Current
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Procedure
Requirements
0.75 mm displacement amplitude or 10 g maximum
acceleration. Vibration applied for three 2-hour sessions
at 10 – 500 Hz (capacitor clamped by body).
No leakage of electrolyte or other visible damage.
Deviations in capacitance and tan δ from initial
measurements must not exceed:
∆ C/C < 5%
Vibration Test Specifications
Standards
IEC 60384–4 long life grade 40/125/56
Compensation Factor of Ripple Current (RC) vs. Frequency
Frequency
Coefficient
300 Hz
0.57
1 kHz
0.80
5 kHz
1.00
100 kHz
1.04
Test Method & Performance
Endurance Life Test
Conditions
Temperature
Test Duration
Ripple Current
Voltage
Performance
+125°C
+105°C (≥100 V)
5,000 hours
2,000 hours
Maximum ripple current specified in table
The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
Performance
The following specifications will be satisfied when the capacitor is tested at +20°C:
< 160 V
Within 15% of the initial value
Capacitance Change
≥ 160 V
Within 10% of the initial value
Equivalent Series Resistance
Leakage Current
Does not exceed 200% of the initial value
Does not exceed leakage current limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
2
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Ordering Options Table
Lead and
Packaging
Code
Packaging
Kind
Lead Length
(mm)
Case Size
Standard Bulk Packaging Options
Bulk (bag)
Tape & Reel
42 +3/-2
L1
≤ 13 x 37
See Dimension Table
T1
Dimensions – Millimeters
LL
LL
"+" polarity indicator
d
Length to Lead Bend
Dimensions in mm
Bulk
Taped
Size Code
D
±0.5
10
L
±1
L1
Minimum
26.0
d
±0.03
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
LL
+3/-2
LL
+3/-2
31
A
B
C
D
E
F
G
H
J
20.0
29.0
20.0
29.0
37.0
29.0
37.0
29.0
37.0
46.0
10
35.0
27
13
26.0
31
13
35.0
27
13
43.0
42
42
42
42
42
42
24
16
35.0
16
43.0
20
20
20
35.0
43.0
L
52.0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
3
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage
current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See
sectional specification under each product series for specific data.
Re-age (Reforming) Procedure
Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady
value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever
is greater) is suggested.
Reliability
The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a
given length of time.
In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability
theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time).
Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the
component.
Reliability as a function of time, R(t), is normally expressed as: R(t)=e-λt
where R(t) is the probability that the component will perform satisfactorily for time t, and λ is the failure rate.
Failure Rate
The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the
characteristic pattern:
• Early failures are removed during the manufacturing process.
• The operational life is characterized by a constant failure rate.
• The wear out period is characterized by a rapidly increasing failure rate.
The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 1 x 10-9
failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours.
e.g., 100FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours
End of Life Definition
Catastrophic Failure: short circuit, open circuit or safety vent operation
Parametric Failure:
• Change in capacitance > ±10%
• Leakage current > specified limit
• ESR > 2 x initial ESR value
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
4
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Failure Rate cont'd
MTBF
The mean time between failures (MTBF) is simply the inverse of the failure rate.
MTBF= 1/λ
early failures
wear out
operational life
Time
Estimated field failure rate: ≤ 1.0 ppm (Failures per year/produced number of capacitors per year)
The expected failure rate for this capacitor range is based on field experience for capacitors with structural similarity.
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects
of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation
has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this
catalog are produced to help our customers’ obligations to guarantee their products and fulfill these legislative requirements. The only
material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing
less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any
necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings.
To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the
label.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
5
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Table 1A – Ratings & Part Number Reference
125°C
Ripple Current
ESR
Maximum
LESL
Approximate
Rated
Capacitance
Case
Size
Size
Code
Maximum
Rated
VDC
Part Number
100 Hz
20°C (µF)
1000
1500
2200
3300
68
100
150
220
220
330
470
470
680
680
680
1000
1000
1500
1500
2200
2200
3300
4700
47
100
220
220
330
100 Hz
125°C (A)
1.035
1.276
1.804
2.088
0.13
0.191
0.287
0.315
0.422
0.515
0.645
0.632
0.851
0.85
1.005
1.166
1.031
1.49
1.372
1.72
1.782
2.251
2.685
0.141
0.255
0.452
0.448
0.525
0.57
0.806
0.827
0.946
0.96
≥ 5 kHz
60°C (A)
4.6
5.6
8
8.8
0.95
1.2
1.5
1.5
3.9
2.6
3.9
3.1
4.6
4
≥ 5 kHz
125°C (A)
1.7
100 Hz
100 kHz
20°C (mΩ)
140
100
60
D x L (mm)
(nH)
20°C (mΩ)
200
140
90
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
40
40
40
40
40
40
F
G
J
16 x 29
16 x 37
20 x 37
20 x 46
10 x 20
10 x 20
10 x 29
10 x 29
13 x 20
13 x 29
13 x 20
13 x 29
13 x 37
16 x 29
16 x 29
16 x 29
16 x 37
16 x 37
20 x 37
16 x 37
20 x 46
20 x 37
20 x 37
10 x 20
10 x 29
13 x 20
13 x 29
13 x 20
13 x 37
16 x 29
16 x 29
16 x 29
16 x 37
16 x 37
20 x 37
16 x 37
20 x 46
20 x 37
20 x 37
20 x 46
10 x 20
10 x 29
13 x 20
13 x 29
13 x 20
13 x 37
10
12
15
17
5
5
6
6
6
PEG124EF4100Q(1)
PEG124EG4150Q(1)
PEG124EJ4220Q(1)
PEG124EL4330Q(1)
PEG124GA2680Q(1)
PEG124GA3100Q(1)
PEG124GB3150Q(1)
PEG124GB3220Q(1)
PEG124GC322AQ(1)
PEG124GD3330Q(1)
PEG124GC347AQ(1)
PEG124GD3470Q(1)
PEG124GE3680Q(1)
PEG124GF3680Q(1)
PEG124GF368AQ(1)
PEG124GF410AQ(1)
PEG124GG4100Q(1)
PEG124GG415AQ(1)
PEG124GJ4150Q(1)
PEG124GG422AQ(1)
PEG124GL4220Q(1)
PEG124GJ433AQ(1)
PEG124GJ447AQ(1)
PEG124HA2470Q(1)
PEG124HB3100Q(1)
PEG124HC322AQ(1)
PEG124HD3220Q(1)
PEG124HC333AQ(1)
PEG124HE3330Q(1)
PEG124HF3470Q(1)
PEG124HF347AQ(1)
PEG124HF368AQ(1)
PEG124HG3680Q(1)
PEG124HG410AQ(1)
PEG124HJ4100Q(1)
PEG124HG415AQ(1)
PEG124HL4150Q(1)
PEG124HJ422BQ(1)
PEG124HJ433BQ(1)
PEG124HL440BM(1)
PEG124KA2330Q(1)
PEG124KB2680Q(1)
PEG124KC315AQ(1)
PEG124KD3150Q(1)
PEG124KC322AQ(1)
PEG124KE3220Q(1)
2.1
2.9
3.2
0.36
0.45
0.61
0.7
1.4
1.1
1.5
1.1
L
70
50
A
A
B
B
C
D
C
D
E
F
F
F
G
G
J
2400
1700
1100
800
390
500
250
370
200
260
130
110
190
70
1600
1100
710
540
140
330
120
250
120
180
50
50
130
40
100
40
60
8
6
8
1.7
1.5
10
10
10
10
12
12
15
12
17
15
15
5
7.6
7.6
4.8
9.3
6
9.3
8
11.8
12.7
1.1
1.5
3.1
2.6
3.1
3.4
4.7
6.1
6
2.7
2.8
1.8
3.4
2.2
3.4
2.9
4.1
140
60
90
40
40
G
L
J
20
20
J
5
A
B
C
D
C
E
F
F
F
G
G
J
G
L
J
J
L
0.44
0.56
1.2
0.96
1.2
1.2
1.7
2.1
2.1
2400
1200
460
590
370
360
250
200
170
190
110
120
90
1300
670
200
320
200
200
140
80
80
110
50
70
60
6
6
8
6
330
470
470
680
10
10
10
10
12
12
15
12
17
15
15
17
5
6
6
8
6
10
680
5.3
7.8
7.4
7.8
8.9
9.5
9.5
12.3
1.1
1.5
3.1
2.8
3.1
3.5
1.9
1000
1000
1500
1500
2200
3300
4000
33
68
150
150
220
1.248
1.323
1.437
1.659
1.803
2.067
2.454
0.153
0.221
0.381
0.416
0.452
0.487
2.8
2.6
2.8
3.2
3.2
3.3
4.2
0.39
0.56
1.2
90
60
60
40
50
40
40
20
A
B
C
D
C
E
2900
1400
580
620
440
440
1300
650
200
290
200
190
1
1.2
1.3
220
PEG124
E
F
410
0
Q
T1
Capacitance
Series
Voltage (VDC)
Size Code
Capacitance Code (µF)
Version
Packaging
Tolerance
Axial Aluminum E= 10
P = 100
See Dimension Table
The second two digits
0 = Standard
A-Z = High
Performance
Q = -10 +30%
See Ordering
Options Table
Electrolytic
G = 16
H = 25
K = 40
M = 63
R = 200
indicate the two most
M = ±20%
U = 350
significant digits of the
V = 400
capacitance value. The
Y = 450
first digit indicates the total
number digits.
(1)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
6
Roll Over for
Order Info.
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Table 1A – Ratings & Part Number Reference cont'd
125°C
Ripple Current
ESR
Maximum
LESL
Approximate
Rated
Capacitance
Case
Size
Size
Code
Maximum
Rated
VDC
Part Number
100 Hz
20°C (µF)
100 Hz
125°C (A)
≥ 5 kHz
60°C (A)
≥ 5 kHz
125°C (A)
100 Hz
100 kHz
D x L (mm)
(nH)
20°C (mΩ)
4300
3400
2200
1600
1100
740
20°C (mΩ)
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
15
22
33
47
68
A
A
B
B
D
D
C
F
D
F
G
F
J
10 x 20
10 x 20
10 x 29
10 x 29
13 x 29
13 x 29
13 x 20
16 x 29
13 x 29
16 x 29
16 x 37
16 x 29
20 x 37
16 x 37
20 x 46
16 x 37
20 x 37
20 x 46
0.113
0.134
0.158
0.19
0.274
0.355
0.328
0.491
0.455
0.647
0.61
0.737
0.845
0.927
1.018
1.09
1
1.1
1.4
1.6
2.3
3
3.1
4
3.6
6.1
5
6.1
6.8
7.5
7.9
7.5
9.2
10.2
0.39
0.43
0.53
0.57
0.89
1
1400
1200
780
550
400
260
220
180
150
80
120
80
80
60
60
5
5
6
6
8
8
6
10
8
10
12
10
15
12
17
12
15
17
PEG124MA2150Q(1)
PEG124MA2220Q(1)
PEG124MB2330Q(1)
PEG124MB2470Q(1)
PEG124MD2680Q(1)
PEG124MD3100Q(1)
PEG124MC310AQ(1)
PEG124MF3150Q(1)
PEG124MD315AQ(1)
PEG124MF322AQ(1)
PEG124MG3220Q(1)
PEG124MF333AQ(1)
PEG124MJ3330Q(1)
PEG124MG347AQ(1)
PEG124ML3470Q(1)
PEG124MG368AQ(1)
PEG124MJ410AQ(1)
PEG124ML415AQ(1)
100
100
150
150
220
220
330
330
470
470
680
1000
1500
1
730
500
460
290
340
240
220
170
160
140
90
70
1.4
1.4
2.1
1.8
2.1
2.3
2.6
2.9
2.6
3.1
3.5
G
L
G
J
60
40
40
1.399
1.715
L
Rated
Capacitance
Size
Code
Case
Size
VDC
Ripple Current
ESR
LESL
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
PEG124
E
F
410
0
Q
T1
Capacitance
Tolerance
Series
Voltage (VDC)
Size Code
Capacitance Code (µF)
Version
Packaging
Axial Aluminum E= 10
P = 100
R = 200
U = 350
V = 400
Y = 450
See Dimension Table
The second two digits
indicate the two most
significant digits of the
capacitance value. The
first digit indicates the total
number digits.
0 = Standard
A-Z = High
Performance
Q = -10 +30%
M = ±20%
See Ordering
Options Table
Electrolytic
G = 16
H = 25
K = 40
M = 63
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
7
Roll Over for
Order Info.
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Table 1B – Ratings & Part Number Reference
105°C
Ripple Current
ESR
Maximum
LESL
Approximate
Rated
Capacitance
Case
Size
Size
Code
Maximum
Rated
VDC
Part Number
120 Hz
20°C (µF)
4.7
22
100 Hz
125°C (A)
0.05
≥ 5 kHz
60°C (A)
0.65
1.24
1.90
1.50
3.20
3.60
6.30
0.38
0.47
0.74
0.86
1.20
1.50
2.00
2.40
3.10
0.37
0.59
0.65
1.20
1.60
2.10
2.50
0.27
0.52
0.70
1.40
1.90
2.40
0.21
0.29
0.38
0.54
0.61
0.82
1.40
1.10
≥ 5 kHz
100 Hz
100 kHz
20°C (mΩ)
2800
1100
540
920
260
300
120
10000
4200
2400
1900
1300
920
660
440
300
D x L (mm)
(nH)
125°C (A)
0.20
0.37
0.58
0.45
0.98
1.10
1.90
0.11
0.17
0.26
0.31
0.42
0.53
0.71
0.88
1.10
0.14
0.22
0.24
0.44
0.56
0.77
0.91
0.11
0.21
0.26
0.50
0.71
0.89
0.08
0.11
0.14
0.20
0.22
0.40
0.30
0.41
0.49
0.56
0.67
0.72
0.89
20°C (mΩ)
16000
3000
1500
1800
700
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
350
350
350
350
350
350
350
400
400
400
400
400
400
450
450
450
450
450
450
450
450
450
450
450
450
450
A
B
D
E
F
G
L
A
B
D
D
F
F
H
J
10 x 20
10 x 29
13 x 29
13 x 37
16 x 29
16 x 37
20 x 46
10 x 20
10 x 29
13 x 29
13 x 29
16 x 29
16 x 29
20 x 29
20 x 37
20 x 46
10 x 29
13 x 29
13 x 29
16 x 29
20 x 29
20 x 37
20 x 46
10 x 29
13 x 29
13 x 37
16 x 37
20 x 37
20 x 46
10 x 20
10 x 29
10 x 29
13 x 29
13 x 29
16 x 29
16 x 29
16 x 37
20 x 29
20 x 29
20 x 37
20 x 37
20 x 46
5
6
8
10
10
12
17
5
6
8
8
10
10
12
15
17
6
PEG124PA147CQ(1)
PEG124PB222VQ(1)
PEG124PD247VQ(1)
PEG124PE247CQ(1)
PEG124PF310VQ(1)
PEG124PG322CQ(1)
PEG124PL347VQ(1)
PEG124RA156BM(1)
PEG124RB2100Q(1)
PEG124RD2150Q(1)
PEG124RD2220Q(1)
PEG124RF2330Q(1)
PEG124RF2470Q(1)
PEG124RH2680Q(1)
PEG124RJ3100Q(1)
PEG124RL3150Q(1)
PEG124UB1470Q(1)
PEG124UD1680Q(1)
PEG124UD2100Q(1)
PEG124UF2220Q(1)
PEG124UH2330Q(1)
PEG124UJ2470Q(1)
PEG124UL2680Q(1)
PEG124VB1220Q(1)
PEG124VD1470Q(1)
PEG124VE2100Q(1)
PEG124VG2220Q(1)
PEG124VJ2330Q(1)
PEG124VL2470Q(1)
PEG124YA1100Q(1)
PEG124YB1220Q(1)
PEG124YB1330Q(1)
PEG124YD1470Q(1)
PEG124YD1680Q(1)
PEG124YF2100Q(1)
PEG124YF210AT(1)
PEG124YG2150Q(1)
PEG124YH215AQ(1)
PEG124YH2220Q(1)
PEG124YJ222AT(1)
PEG124YJ2330Q(1)
PEG124YL2470Q(1)
0.122
0.206
0.192
0.354
0.536
0.904
0.049
0.065
0.096
0.12
47
47
100
220
470
5.6
10
15
22
33
47
500
210
20000
10000
6300
4600
3100
2200
1500
1000
690
17000
9000
7600
3300
2300
1500
1100
25000
11000
5900
2700
1600
1200
49000
24000
17000
11000
8300
5700
4600
3600
3300
2400
2100
1600
1200
0.167
0.21
68
0.294
0.353
0.446
0.055
0.092
0.102
0.184
0.248
0.328
0.389
0.042
0.078
0.116
0.209
0.304
0.377
0.03
0.043
0.055
0.079
0.097
0.133
0.141
0.171
0.185
0.24
100
150
4.7
6.8
10
22
33
47
68
2.2
4.7
10
22
33
L
B
D
D
F
H
J
7500
4200
3600
1500
1100
660
8
8
10
12
15
17
6
L
500
B
D
E
G
J
12000
5100
3000
1200
760
8
10
12
15
17
5
6
6
8
8
10
10
12
12
12
15
15
17
47
L
530
1.0
2.2
3.3
4.7
6.8
10
10
15
15
22
A
B
B
D
D
F
F
G
H
H
J
20000
11000
7300
4800
4000
2800
1700
1700
1400
1100
800
1.60
1.60
2.30
2.00
2.40
22
33
47
0.242
0.306
0.377
J
L
740
530
Rated
Capacitance
Size
Code
Case
Size
VDC
Ripple Current
ESR
LESL
Part Number
(1)
PEG124
E
F
410
0
Q
T1
Capacitance
Tolerance
Series
Voltage (VDC)
Size Code
Capacitance Code (µF)
Version
Packaging
Axial Aluminum E= 10
P = 100
R = 200
U = 350
V = 400
Y = 450
See Dimension Table
The second two digits
indicate the two most
significant digits of the
capacitance value. The
first digit indicates the total
number digits.
0 = Standard
A-Z = High
Performance
Q = -10 +30%
M = ±20%
See Ordering
Options Table
Electrolytic
G = 16
H = 25
K = 40
M = 63
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
8
Roll Over for
Order Info.
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Operational Life PEG124 (+125°C)
Operational life (Lop) at ambient temperature Ta and ripple current IAC.
Diagram valid for 20 mm case size.
3.0
Operational life,
Max Ripple Current
16 mm case size: 0.67 x diagram value
2.5
13 mm case size: 0.44 x diagram value
10 mm case size: 0.37 x diagram value
2.0
I
AC /IRAC
1.5
1.0
0.5
0
Example:
(125ºC)
Article: PEG124MG368AQ (16 x 37 mm)
Ambient temperature (Ta): +85°C
Ripple current at 10 kHz (IAC): 6.2 A
I
RAC (+125°C, ≥ 5 kHz) = 2.7 A (from data table)
→ IAC/ IRAC (+125°C) = 2.3
30
40
50
60
70
80
90
100
110
120
Ambient Temperature (Ta)
Operational life: Interpolation between the
Lop-curves → Lop ~20 kh x 0.67 = 13 kh (blue curves)
Operational Life PEG124 (+105°C)
Operational life (Lop) at ambient temperature Ta and ripple current IAC.
Diagram valid for 20 mm case size.
Operational life,
3.5
Max Ripple Current
16 mm case size: 0.67 x diagram value
3.0
13 mm case size: 0.44 x diagram value
10 mm case size: 0.37 x diagram value
2.5
2.0
I
AC /IRAC
Example:
(105ºC)
1.5
Article: PEG124RL3150Q (20 x 46 mm)
Ambient temperature (Ta): +79°C
Ripple current, at 10 kHz (IAC): 2.7 A
1.0
0.5
0
I
RAC(105°C, ≥ 5 kHz )= 1.10 A (from data table)
30
40
60
70
80
100
50
90
→ IAC/ IRAC(+105°C) = 2.45
Ambient Temperature (Ta)
Operational life: Interpolation between the
Lop-curves → Lop ~ 40 kh (blue curves)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013
9
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Packaging Quantities
Packaging Quantities
Size Code
Tape & Reel
Bulk
A
B
C
D
E
F
500
500
400
400
400
250
200
250
200
150
125
100
150
125
100
G
H
J
L
Print Detail
Standard Marking for PEG and PEH types
• KEMET Logo
• Rated capacitance
• Capacitance tolerance
• Rated voltage
• Date code
• Polarity indication
• Article code
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013 10
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Construction
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are
attached to each foil to provide the electrical contact.
Extended cathode
Anode foil
Foil tabs
The deck, complete with terminals, is attached to the tabs and then
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte.
Tissues
Cathode foil
Each capacitor is aged and tested before being sleeved and
packed. The purpose of aging is to repair any damage in the oxide
layer and thus reduce the leakage current to a very low level. Aging
is normally carried out at the rated temperature of the capacitor and
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours
to complete.
Etching
Forming
Winding
Decking
Impregnation
Assembly
Aging
Damage to the oxide layer can occur due to variety of reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
A sample from each batch is taken by the quality department after
completion of the production process.
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action.
Testing
Electrical:
Mechanical/Visual:
• Overall dimensions
• Torque test of mounting stud
• Print detail
• Box labels
• Packaging, including packed
quantity
• Leakage current
• Capacitance
• ESR
• Impedance
• Tan Delta
Sleeving
Packing
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013 11
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Taipei, Taiwan
Tel: 886-2-27528585
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
North America
Southeast Asia
Singapore
Southeast
Tel: 65-6586-1900
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013 12
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
http://www.kemet.com:8080/elc
SPICE & FIT Software
Search Our FAQs: KnowledgeEdge
Electrolytic LifeCalculator
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Resource
Location
http://www.kemet.com/sample
http://www.kemet.com/kits
Sample Request
Engineering Kit Request
Contact
Location
Website
Contact Us
Investor Relations
Call Us
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013 13
Axial Aluminum Electrolytic Capacitors – PEG124, +105ºC and +125ºC
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications,
cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.07.16 10:39:17 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4011_PEG124 • 7/15/2013 14
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明