R413N24700000M_技术文档

Metallized Polypropylene Film EMI Suppression Capacitors

R41, Class Y2, 300 VAC, 110°C

(Automotive Grade)

Overview

Applications

TheꢀR41ꢀisꢀconstructedꢀofꢀmetallizedꢀpolypropyleneꢀﬁlmꢀ

encapsulated with self-extinguishing resin in a box of

material meeting the requirements of UL 94 V–0.

For use in electromagnetic interference (EMI) suppression

ﬁlterꢀꢀinꢀ"line-to-ground"ꢀandꢀ"across-the-line"ꢀapplicationsꢀ

requiringꢀY2/X1ꢀsafetyꢀclassiﬁcation.ꢀSuitableꢀforꢀuseꢀinꢀ

situations where failure of the capacitor could lead to danger

ofꢀelectricꢀshock.ꢀNotꢀforꢀuseꢀinꢀ"seriesꢀwithꢀmains"ꢀtypeꢀ

applications.

Automotive Grade devices (up to 22.5 mm Lead Spacing)

meet the demanding Automotive Electronics Council's AEC–

Q200ꢀqualiﬁcationꢀrequirements.

Beneﬁts

• Approvals: ENEC, UL, cUL, CQC

• Class Y2 / X1 (IEC 60384-14)

• Rated voltage: 300 VAC 50/60 Hz

• Capacitance range: 0.001 – 1 µF

• Lead spacing: 10 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category: 40/110/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−40˚Cꢀtoꢀ+110˚C

• 100% screening factory test at 5,000 VDC/2,500 VAC

• Self-healing properties

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

• Automotive (AEC–Q200) grades available up to

22.5 mm Lead Spacing

Part Number System

R41

3

I

2330

00

M1

M

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance

Code (pF)

Capacitance

Tolerance

Series

Packaging

Internal Use

Y2, Metallized

Polypropylene

3 = 300

F = 10.0

I = 15.0

N = 22.5

R = 27.5

W = 37.5

The last three

digits represent

signiﬁcantꢀﬁgures.ꢀ

Theꢀﬁrstꢀdigitꢀ

speciﬁesꢀnumberꢀ

of zeros to be

added.

See Ordering

Options Table

00

M1

K = ±10%

M = ±20%

One world. One KEMET

F3100_R41_Y2_300 • 10/16/2017

1

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Ordering Options Table

Lead Spacing

Lead Length

(mm)

Lead and

Packaging Code

Nominal

(mm)

Type of Leads and Packaging

Standard Lead and Packaging Options

Bulk (Bag) – Short Leads

Ammo Pack

4ꢀ+2/−0

00

H₀= 18.5 ±0.5

DQ

Other Lead and Packaging Options

Tape & Reel (Large Reel)

Bulk (Bag) – Short Leads

Bulk (Bag) – Long Leads

H₀= 18.5 ±0.5

3.5ꢀ+0.5/−0

4.0ꢀ+0.5/−0

3.2ꢀ+0.3/−0.2

18 ±1

CK

JB

JE

JH

JM

40

50

10,

15,

22.5

30ꢀ+5/−0

25ꢀ+2/−1

Standard Lead and Packaging Options

Bulk (Bag) – Short Leads

Tape & Reel (Large Reel)

4ꢀ+2/−0

00

H₀= 18.5 ±0.5

CK

27.5

37.5

Other Lead and Packaging Options

Bulk (Bag) – Long Leads

30ꢀ+5/−0

25ꢀ+2/−1

40

50

Standard Lead and Packaging Options

Bulk (Bag) – Short Leads

4ꢀ+2/−0

00

Other Lead and Packaging Options

Bulk (Bag) – Long Leads

30ꢀ+5/−0

25ꢀ+2/−1

40

50

F3100_R41_Y2_300 • 10/16/2017

2

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Dimensions – Millimeters

FRONT VIEW

SIDE VIEW

L

B

H

d

LL

p

B

H

L

d

Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance

10.0

15.0

22.5

27.5

37.5

±0.4

4.0

5.0

+0.2

+0.3

9.0

+0.1

13.0

18.0

26.5

32.0

41.5

+0.2

+0.3

+0.5

+0.3

0.6

0.8

1.0

±0.05

11.0

12.0

11.0

12.0

13.5

14.5

19.0

15.0

16.0

17.0

18.5

22.0

28.0

33.0

24.0

28.5

40.0

6.0

5.0

6.0

7.5

8.5

11.0

6.0

7.0

8.5

10.0

13.0

14.0

18.0

13.0

16.0

20.0

Note: See Ordering Options Table for lead length (LL/H₀) options.

F3100_R41_Y2_300 • 10/16/2017

3

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Performance Characteristics

Dielectric

Plates

Polypropyleneꢀﬁlm

Metal layer deposited by evaporation under vacuum

Winding

Non-inductive type

Leads

Tinned wire

Protection

Plasticꢀcase,ꢀthermosettingꢀresinꢀﬁlled.ꢀBoxꢀmaterialꢀisꢀsolventꢀresistantꢀandꢀﬂameꢀretardantꢀaccordingꢀtoꢀUL94.

Related documents

Rated Voltage (V_R)

Capacitance Range

Capacitance Values

Capacitance Tolerance

Temperature Range

Climatic Category

IEC 60384-14, EN 60384-14

300 VAC (50/60 Hz), 1,000 VDC

0.0010 to 1 µF

E6 series (IEC 60063)

±10%, ±20%

−40°Cꢀtoꢀ+110°C

40/110/56 IEC 60068-1

Storageꢀtime:ꢀ≤ꢀ24ꢀmonthsꢀfromꢀtheꢀdateꢀmarkedꢀonꢀtheꢀlabelꢀpackage

Averageꢀrelativeꢀhumidityꢀperꢀyearꢀ≤ꢀ70%

RHꢀ≤ꢀ85%ꢀforꢀ30ꢀdaysꢀrandomlyꢀdistributedꢀthroughoutꢀtheꢀyear

Dew is absent

Storage Conditions

Approvals

Temperature:ꢀ−40ꢀtoꢀ80°Cꢀ(seeꢀ"MaximumꢀHumidityꢀinꢀStorageꢀConditions"ꢀgraphꢀbelow)

ENEC, UL, cUL, CQC

Maximum Humidity in Storage Conditions

100

90

80

70

60

50

40

30

20

10

0

30 Days

Annual Average

−40

−20

0

20

40

60

80

Temperature (ºC)

F3100_R41_Y2_300 • 10/16/2017

4

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Performance Characteristics cont'd

DissipationꢀFactorꢀ(tanδ)

≤ꢀ0.3%ꢀ(0.2%*)ꢀatꢀ1kHzꢀ,ꢀ+25°Cꢀ±5°Cꢀ(*ꢀtypicalꢀvalue)

The 100% screening factory test is carried out at 5,000 VDC/2,500 VAC. The voltage level is selected to meet

the requirements in applicable equipment standards. All electrical characteristics are checked after the test.

It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such

case for any failures.

Test Voltage Between Terminals

Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀaccordingꢀtoꢀIECꢀ60384–2

Minimum Values Between Terminals

Insulation Resistance

In DC Applications

Voltage Charge

100 VDC

Voltage Charge Time

1 min

Cꢀ≤ꢀ0.33ꢀμF

Cꢀ>ꢀ0.33ꢀμF

≥ꢀ1ꢀ•ꢀ10⁵ꢀMΩ

≥ꢀ30,000ꢀMΩꢀ•ꢀµF

(ꢀ≥ꢀ150,000ꢀMΩꢀ•ꢀµFꢀ)*

(ꢀ≥ꢀ5ꢀ•ꢀ10⁵ꢀMΩꢀ)*

Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC

* Typical value

Qualiﬁcation

Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details

regardingꢀtestꢀmethodsꢀandꢀconditionsꢀareꢀreferencedꢀinꢀdocumentꢀAEC–Q200,ꢀStressꢀTestꢀQualiﬁcationꢀforꢀPassiveꢀ

Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their

website at www.aecouncil.com.

Impedance Graph

F3100_R41_Y2_300 • 10/16/2017

5

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Environmental Test Data

Test

IEC Publication

Procedure

1.7 x V_RVAC 50 Hz, once every hour increase to 1,000 VAC for 0.1

second, 1,000 hours at upper rated temperature

Endurance

EN/IEC 60384–14

Vibration

IEC 60068–2–6 Test Fc

IEC 60068–2–29 Test Eb

IEC 60068–2–14 Test Na

IEC 60384–14

3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s²

Bump

1,000 bumps at 390 m/s²

Change of Temperature

Active Flammability

Passive Flammability

Damp Heat Steady State

Upper and lower rated temperature 5 cycles

V_Rꢀ+20ꢀsurgeꢀpulsesꢀatꢀ5ꢀkVꢀ(pulseꢀeveryꢀ5ꢀseconds)

IECꢀ60384–1,ꢀIECꢀ60695–11–5ꢀNeedleꢀﬂameꢀtest

+40°Cꢀandꢀ93%ꢀRH,ꢀ56ꢀdays

IEC 60384–14

IEC 60068–2–78 Test Cab

Approvals

Mark

Speciﬁcation

File Number

EN/IEC 60384-14

V4160

UL 60384-14 and

CAN/CSA E60384-14

(300 VAC)

E97797

CQC13001087758

CQC13001101264

CQC14001116018

CQC14001116611

IEC 60384-14

Environmental Compliance

All KEMET EMI capacitors are RoHS Compliant.

F3100_R41_Y2_300 • 10/16/2017

6

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Table 1 – Ratings & Part Number Reference

Dimensions in mm

Capacitance

Value (µF)

Lead Spacing

(p)

dV/dt

(V/µs)

New KEMET

Part Number

Legacy Part

Number

B

H

9.0

L

0.0010

0.0015

0.0022

0.0033

0.0047

0.0068

0.010

0.0033

0.0047

0.0068

0.010

0.015

0.022

0.033

0.047

0.068

0.047

0.068

0.10

4.0

13.0

18.0

26.5

32.0

41.5

10.0

15.0

22.5

27.5

37.5

800

600

500

400

300

413F1100(1)00(2)

413F1150(1)00(2)

413F1220(1)00(2)

413F1330(1)M1(2)

413F1470(1)M1(2)

413F1680(1)00(3)

413F2100(1)M1(3)

413I1330(1)00(2)

413I1470(1)00(2)

413I1680(1)00(2)

413I2100(1)00(2)

413I2150(1)M1(2)

413I2220(1)M1(2)

413I2330(1)M1(2)

413I2470(1)M1(2)

413I2680(1)00(2)

413N2470(1)00(2)

413N2680(1)M1(3)

413N2680(1)00(2)

413N3100(1)M1(2)

413N3150(1)M1(2)

413N3220(1)00(2)

413R3220(1)00(2)

413R3330(1)00(2)

413R3470(1)00(2)

413R3680(1)00(2)

413W 3470(1)00(2)

413W 3680(1)00(2)

413W 4100(1)00(2)

R413F1100(1)00(2)

R413F1150(1)00(2)

R413F1220(1)00(2)

R413F1330(1)M1(2)

R413F1470(1)M1(2)

R413F1680(1)00(3)

R413F2100(1)M1(3)

R413I1330(1)00(2)

R413I1470(1)00(2)

R413I1680(1)00(2)

R413I2100(1)00(2)

R413I2150(1)M1(2)

R413I2220(1)M1(2)

R413I2330(1)M1(2)

R413I2470(1)M1(2)

R413I2680(1)00(2)

R413N2470(1)00(2)

R413N2680(1)M1(3)

R413N2680(1)00(2)

R413N3100(1)M1(2)

R413N3150(1)M1(2)

R413N3220(1)00(2)

R413R3220(1)00(2)

R413R3330(1)00(2)

R413R3470(1)00(2)

R413R3680(1)00(2)

R413W 3470(1)00(2)

R413W 3680(1)00(2)

R413W 4100(1)00(2)

9.0

4.0

9.0

4.0

9.0

5.0

11.0

12.0

11.0

12.0

13.5

14.5

19.0

15.0

16.0

17.0

18.5

22.0

28.0

33.0

24.0

28.5

40.0

6.0

5.0

6.0

7.5

8.5

11.0

6.0

7.0

8.5

10.0

13.0

14.0

18.0

13.0

16.0

20.0

0.15

0.22

0.33

0.47

0.68

0.47

0.68

1.0

Lead

Spacing (p)

New KEMET

Part Number

Capacitance Value (µF)

B (mm)

H (mm)

L (mm)

dV/dt (V/µs)

Legacy Part Number

(1) Insert lead and packaging code. See Ordering Options Table for available options.

(2) M = ±20%, K = ±10%

(3) M = ±20% (only available tolerance).

F3100_R41_Y2_300 • 10/16/2017

7

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Soldering Process

The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.

Thisꢀhasꢀincreasedꢀtheꢀliquidusꢀtemperatureꢀfromꢀthatꢀofꢀ183°CꢀforꢀSnPbꢀeutecticꢀalloyꢀtoꢀ217ꢀ–ꢀ221°Cꢀforꢀtheꢀnewꢀalloys.ꢀAsꢀaꢀ

result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave

temperatures.ꢀPolypropyleneꢀcapacitorsꢀareꢀespeciallyꢀsensitiveꢀtoꢀheatꢀ(theꢀmeltingꢀpointꢀofꢀpolypropyleneꢀisꢀ160ꢀ–ꢀ170°C).ꢀWaveꢀ

soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),

andꢀgreatꢀcareꢀhasꢀtoꢀbeꢀtakenꢀduringꢀsoldering.ꢀTheꢀrecommendedꢀsolderꢀproﬁlesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀ

KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline

for successful soldering. Please see Figure 1.

Reﬂowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀﬁlmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀproﬁleꢀinꢀexcessꢀofꢀtheꢀ

above the recommended limits may result to degradation or permanent damage to the capacitors.

Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert

through-holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀproﬁleꢀinꢀtheꢀoven,ꢀ

if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.

Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.

Manual Soldering Recommendations

Wave Soldering Recommendations

300

The following is the recommendation for

manual soldering with a soldering iron.

2 +3 seconds maximum

260°C

250

200

150

100

50

Firstwave

Second wave

Recommended Soldering Temperature

∆T <150°C

Cooling

400

Preheating

ca 2°C/second

ca 3.5°C/second typical

ca 5°C/second

350

300

250

200

150

100

50

115 °C max

T_preheat

100 °C

Typical

0

40

80

120

160

200

240

Time (s)

0

1

2

3

4

5

6

7

8

Soldering time (seconds)

The soldering iron tip temperature should

beꢀsetꢀatꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀ

soldering duration not to exceed more than 3

seconds.

F3100_R41_Y2_300 • 10/16/2017

8

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Soldering Process cont'd

Wave Soldering Recommendations cont'd

1. The table indicates the maximum set-up temperature of the soldering process

Figure 1

Maximum

Maximum Preheat

Peak Soldering

Temperature

Dielectric

Film Material

Capacitor Capacitor Capacitor Capacitor Capacitor

Pitch

≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm

Polyester

Polypropylene

Paper

130°C

100°C

130°C

110°C

130°C

140°C

270°C

260°C

270°C

Polyphenylene

Sulphide

150°C

160°C

270°C

2. The maximum temperature measured inside the capacitor:

Set the temperature so that inside the element the maximum temperature is below the limit:

Maximum temperature

Dielectric Film Material

measured inside the element

Polyester

Polypropylene

Paper

160°C

110°C

160°C

Polyphenylene

sulphide

Temperature monitored inside the capacitor.

Selective Soldering Recommendations

Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreﬂowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀ

componentsꢀtoꢀbeꢀsolderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀﬂowꢀsolderingꢀwithoutꢀtouchingꢀ

the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten

solder only at the places of the selected components, and pressed against the lower surface of the board to solder the

components.

Theꢀtemperatureꢀproﬁleꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀﬂowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀ

however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of

overheatingꢀisꢀgreaterꢀthanꢀinꢀdoubleꢀwaveꢀﬂowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.

F3100_R41_Y2_300 • 10/16/2017

9

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Construction

Detailed Cross Section

2 Sections

Molded Plastic

Case

Single-sided Metallized

Polypropylene Film

(First Layer)

Molded Plastic Self-Extinguishing

Case

Resin

Single-sided Metallized

Polypropylene Film

(Second Layer)

Margin

Metal Contact

Layer

Metal Contact

Layer

Margin

Leads

Winding Scheme

Single-sided

Metallized

Polypropylene

Film

2 Sections

F3100_R41_Y2_300 • 10/16/2017 10

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Marking

Lead Spacing 10 mm

FRONT

TOP

Capacitance Tolerance

Series,

Approval

Marks

Dielectric

Code, Safety

Class, Self

Healing

Manufacturer’s

Logo

Capacitance,

Rated Voltage

IEC Climatic

Category

Date Code

Manufacturing

Plant

Passive Flammability

Category

Lead Spacing 15 mm, 22.5 mm (small case sizes)

FRONT

TOP

Capacitance Tolerance

Series,

Approval

Marks

Dielectric

Code, Safety

Class, Self

Healing

Manufacturer’s

Logo

Capacitance,

Rated Voltage

IEC Climatic

Category

Date Code

Manufacturing

Plant

Passive Flammability

Category:

B for volume ≥ 1750 mm³

C for volume < 1750 mm³

F3100_R41_Y2_300 • 10/16/2017 11

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Marking cont'd

FRONT

TOP

Series Dielectric

Safety

Class

Self

Healing

Code

Capacitance,

Capacitance

Tolerance,

Manufacturer’s

Logo

Approval

Marks

Rated Voltage

IEC Climatic

Category

QA Number

Passive

Flammability Manufacturing Date Code

Category

Plant

Manufacturing Date Code (IEC 60062)

Y = Year, Z = Month

Year

Code

Month

Code

2000

2001

2002

2003

2004

2005

2006

2007

2008

2009

2010

2011

2012

2013

2014

2015

2016

2017

2018

2019

2020

M

N

P

R

S

January

February

March

1

2

3

4

5

6

7

8

9

O

N

D

April

May

T

June

U

V

W

X

A

B

C

D

E

July

August

September

October

November

December

F

H

J

K

L

M

F3100_R41_Y2_300 • 10/16/2017 12

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Packaging Quantities

Standard

Reel

ø 355 mm

Lead Spacing Thickness Height Length

Bulk

Large Reel

ø 500 mm

Ammo

Taped

(mm)

Short Leads Long Leads

4.0

5.0

6.0

9.0

11.0

12.0

13.0

2000

1300

1000

1800

1500

1200

750

1500

1250

1000

800

600

10

500

680

5.0

6.0

7.5

11.0

12.0

13.5

14.5

19.0

18.0

2000

1750

1000

450

1000

900

700

500

350

600

500

350

300

–

1250

1000

800

680

500

440

340

15

8.5

11.0

700

500

6.0

7.0

15.0

16.0

17.0

18.5

22.0

26.5

805

700

468

396

300

500

300

200

–

700

550

450

350

300

464

380

280

235

–

8.5

22.5

10.0

13.0

14.0

18.0

22.0

28.0

33.0

32.0

480

352

256

288

176

128

–

300

–

27.5

37.5

–

13.0

16.0

20.0

24.0

28.5

40.0

41.5

360

216

126

216

108

84

–

F3100_R41_Y2_300 • 10/16/2017 13

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Lead Taping & Packaging (IEC 60286–2)

ꢀiꢁꢂre 1

Leꢃꢄ ꢅpꢃꢆiꢇꢁ 1ꢈ ꢉꢉ

ꢀiꢁꢂre ꢃ

Leꢄꢅ ꢆpꢄꢇiꢈꢁ 15 ꢉꢉ

ꢀiꢁꢂre ꢃ

Leꢄꢅ ꢆpꢄꢇiꢈꢁ ꢉꢉꢊ5 ꢋ ꢉꢌꢊ5 ꢍꢍ

P

ꢂ

P₂

ꢄd

A

ꢆ

P₁P₀

ꢃ₀

F

P₁

P₂

Aꢅꢆ

t

Taping Speciﬁcation

Dimensions (mm)

Lead Space

Description

Symbol

10

15

22.5

Fig. 3

0.8

27.5

Fig. 3

0.8

Tol.

Fig. 1

0.6

Fig. 2

0.6-0.8

Lead wire diameter

Taping lead space

d

P

±0.05

±1

25.4

12.7

7.7

25.4

12.7

5.2

12.7

15

38.1

12.7

7.8

38.1

12.7

5.3

Feedꢀholeꢀleadꢀspaceꢀ*

Centering of the lead wire

Centering of the body

Leadꢀspacingꢀ(pitch)ꢀ***

Component alignment

P₀

P₁

P₂

F

±0.2ꢀ**

±0.7

12.7

10

19.05

22.5

0

19.05

27.5

0

±1.3

+0.6/−0.1

∆h

0

±2

Height of component

from tape center

H₀ꢀ****

18.5

±0.5

Carrier tape width

Hold down tape width

Hole position

W

W₀

W₁

W₂

D₀

t

18

9

18

10

9

18

10

9

18

10

9

+1ꢀ/ꢀ−0.5

Minimum

±0.5

9

Hold down tape position

Feed hole diameter

Total tape thickness

3

Maximum

±0.2

4

0.7

±0.2

* Available also in 15 mm.

** Maximum 1 mm on 20 lead spaces.

*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.

**** H₀= 16.5 mm available upon request.

F3100_R41_Y2_300 • 10/16/2017 14

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

Lead Taping & Packaging (IEC 60286–2) cont'd

Ammo Speciﬁcations

Dimensions (mm)

H

W

T

360

340

59

H

W

T

Reel Speciﬁcations

Dimensions (mm)

Reel Size

D

H

W

Standard

Large

355

500

30

55 Maximum

25

H

D

W

F3100_R41_Y2_300 • 10/16/2017 15

Metallized Polypropylene Film EMI Suppression Capacitors

R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)

KEMET Electronics Corporation Sales Oﬃces

Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀo ꢀꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.

Disclaimer

Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ

applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

KEMET is a registered trademark of KEMET Electronics Corporation.

F3100_R41_Y2_300 • 10/16/2017 16


型号：	R413N24700000M
厂家：	KEMET CORPORATION
描述：	Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED 电容器
文件：	总16页 (文件大小：1641K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R413N24700000M [KEMET]

相关型号：

R413N24704000K

R413N24705000M

R413N268000M1M

R413N268040M1M

R413N26805000M

R413N31000000K

R413N31000000M

R413N310000M1K

R413N310000M1M

R413N31004000K

R413N310040M1K

R413N310040M1M