R5T510E477M050AGA030 [KEMET]
T510 Series Automotive Grade Multiple Anode Low ESR MnO2;型号: | R5T510E477M050AGA030 |
厂家: | KEMET CORPORATION |
描述: | T510 Series Automotive Grade Multiple Anode Low ESR MnO2 |
文件: | 总15页 (文件大小:1396K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade
Multiple Anode Low ESR MnO2
Overview
The low ESR, surge-robust T510 Series is designed for
demanding applications that require high surge current
and high ripple current capability. This series builds upon
the proven capabilities of our industrial grade tantalum
chip capacitors to offer several advantages such as low
ESR, high ripple current capability, excellent capacitance
stability, and improved resistance to high in-rush currents.
These benefits are achieved though the utilization of multiple
anodes as well as high-stress, low impedance electrical
conditioning performed prior to screening. This series is
classified as MSL (Moisture Sensitivity Level) 1 under J STD
020: unlimited floor life time at ≤30°C/85% RH.
Benefits
• Complies with AEC–Q200
• Meets or exceeds EIA standard 535BAAC
• Taped and reeled per EIA 481
• High surge current capability
• Optional gold-plated terminations
• High ripple current capability
• 100% surge current test
• 100% steady-state accelerated aging
• Capacitance values of 10 μF to 1,000 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 – 50 VDC
• Case sizes E and X
• ESR as low as 18 mΩ
• RoHS Compliant and lead-free terminations
• Operating temperature range of −55˚C to +125˚C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable
electronics, telecommunications, and control units requiring high ripple current capability.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
1
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
510
X
477
M
006
A
T
A030
Rated Failure
Voltage Rate/
(VDC) Design
Capacitor
Class
Case Capacitance Capacitance
Packaging
(C-Spec)
Series
Termination Finish
ESR
Size
Code (pF)
Tolerance
T =
Tantalum
Multiple
Anode
E
X
First two
digits
K = ±10%
004 = 4
A = T = 100% Matte Tin (Sn) Plated*
A = AUTO grade
Blank = 7"
Reel
M = ±20% 006 = 6.3 N/A H = Standard Solder Coated (SnPb product
Low ESR
represent
significant
figures. Third
digit specifies
number of
zeros.
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
5% Pb minimum)
G = Gold Plated (A, B, C, D, X only) ESR in mΩ at
room temperature
(30mΩ)
030 = Maximum
7280 = 13"
Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
−55°C to 125°C
10 – 1,000 µF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
4 – 50 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.01 CV (µA) at rated voltage after 5 minutes
ESR (100 kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
2
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Qualification
Test
Condition
Characteristics
Within ±10% of initial value
Within initial limits
Δ C/C
DF
85°C at rated voltage, 2,000 hours
125°C at 2/3 rated voltage, 2,000 hours
Endurance
DCL
ESR
Δ C/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±10% of initial value
Within initial limits
Storage Life
Thermal Shock
125°C at 0 volts, 2,000 hours
DCL
ESR
Δ C/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±5% of initial value
Within initial limits
MIL–STD–202, Method 107, Condition B, mounted,
−55C° to 125° C, 1,000 cycles
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
−55°C
±10%
IL
+85°C
±10%
+125°C
±20%
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
−55ºC, +25ºC, +85ºC, +125ºC, +25ºC
Δ C/C
Temperature Stability
Surge Voltage
DF
IL
1.5 x IL
10 x IL
1.5 x IL
12 x IL
DCL
IL
n/a
Δ C/C
DF
Within ±5% of initial value
Within initial limits
85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
DCL
ESR
Δ C/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to
2,000 Hz, 20 G peak
Mechanical Shock/
Vibration
DCL
Within initial limits
*IL = Initial limit
Certification
KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog
part types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator
(C-Spec), are not considered KEMET Automotive Grade tantalum capacitors.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
3
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Electrical Characteristics
Impedance, ESR vs. Frequency
100
Capacitance vs. Frequency
100
10
1
T510ꢂ22ꢃM0ꢄ5ATE100ꢅꢆMꢇ
T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅꢆMꢇ
T510EꢈꢉꢃM0ꢄ5ATE050ꢅꢆMꢇ
10
T510ꢂ22ꢃM0ꢄ5ATE100ꢅESR
T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅESR
T510EꢈꢉꢃM0ꢄ5ATE050ꢅESR
1
T510ꢁ22ꢂM0ꢃ5ATE100
T510ꢁꢃꢃꢂM0ꢃ5ATE0ꢂ5
T510EꢄꢅꢂM0ꢃ5ATE050
0ꢀ1
0ꢀ01
100
1ꢁ000
10ꢁ000
100ꢁ000
1ꢁ000ꢁ000
10ꢁ000ꢁ000
100
1ꢀ000
10ꢀ000
100ꢀ000
1ꢀ000ꢀ000
10ꢀ000ꢀ000
ꢋreꢌꢍeꢄcꢎ ꢈꢏꢐꢊ
ꢃreꢅꢆeꢁcꢇ ꢂꢈꢉꢄ
Dimensions – Millimeters (Inches)
Metric will govern
CATꢀOꢆE ꢊꢍꢌ Eꢉꢆ ꢇꢅEꢈ
ꢈ
SꢅꢆE ꢇꢅEꢈ
AꢉOꢆE ꢊꢋꢌ Eꢉꢆ ꢇꢅEꢈ
ꢂOTTOM ꢇꢅEꢈ
A
ꢂ
ꢂ
ꢀ
E
ꢃ
ꢄ
Termination cutout
at ꢎEMETꢏs optionꢐ
eitꢑer end
ꢁ
T
S
G
S
R
L
Total
Weight
Case Size
Component
F ±0.1 S ±0.3 B ±0.15
±(.004) ±(.012) (Ref) ±.006
X
(Ref)
P
R
T
A
G
E
KEMET EIA
L
W
H
(mg)
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
7.3±0.3
4.3±0.3
4.0±0.3
2.4
1.3
(0.051)
1.3
(0.051)
0.5
(0.020)
0.5
(0.020)
0.10±0.10
1.7
1.0
0.13
3.8
3.5
3.5
7343–43
430.15
500.73
X
(0.287±0.012) (0.169±0.012) (0.157±0.012) (0.094)
7.3±0.3 6.0±0.3 3.6±0.2 4.1
(0.287±0.012) (0.236±0.012) (0.142±0.008) (0.161)
(0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138)
0.10±0.10
(0.004±0.004)
0.13
3.8
3.5
3.5
7360–38
n/a
n/a
E
(0.005) (0.150) (0.138) (0.138)
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or
a notch.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
4
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Table 1 – Ratings & Part Number Reference
Maximum
Operating
Temp
Case
Code/
Case Size
Rated Rated
Voltage Cap
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
DF
ESR
MSL
% @ +20ºC mΩ @ +20ºC
120 Hz
Max
mA @
mA @
Reflow
Temp
≤ 260ºC
(See below for
part options)
µA @ +20ºC
Max/5 Min
mA @ +25ºC
100 kHz
VDC @ 85ºC
µF
KEMET/EIA
100 kHz
Max
30
35
18
+85ºC 100 +125ºC 100
ºC
kHz
2700
2499
3581
2700
3083
3168
2499
2338
2338
2499
2338
2204
2204
2148
1479
1653
1909
1834
1994
1834
2148
1559
1350
1479
mA @
kHz
1200
1111
1592
1200
1370
1408
1111
1039
1039
1111
1039
980
980
955
657
735
848
815
886
815
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
4
4
4
680
1000
1000
470
680
680
330
150
220
100
100
100
68
100
22
22
22
33
47
47
47
10
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
T510X687(1)004A(2)A030
T510X108(1)004A(2)A035
T510E108(1)004A(2)A018
T510X477(1)006A(2)A030
T510X687(1)006A(2)A023
T510E687(1)006A(2)A023
T510X337(1)010A(2)A035
T510X157(1)016A(2)A040
T510X227(1)016A(2)A040
T510X107(1)020A(2)A035
T510X107(1)020A(2)A040
T510X107(1)020A(2)A045
T510X686(1)025A(2)A045
T510E107(1)025A(2)A050
T510X226(1)035A(2)A100
T510X226(1)035A(2)A080
T510X226(1)035A(2)A060
T510X336(1)035A(2)A065
T510X476(1)035A(2)A055
T510X476(1)035A(2)A065
T510E476(1)035A(2)A050
T510X106(1)050A(2)A090
T510X106(1)050A(2)A120
T510X226(1)050A(2)A100
27.2
40.0
40.0
29.6
42.8
42.8
33.0
24.0
35.2
20.0
20.0
20.0
17.0
25.0
7.7
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
10.0
8.0
6.0
6.0
8.0
8.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
3000
2777
3979
3000
3426
3520
2777
2598
2598
2777
2598
2449
2449
2387
1643
1837
2121
2038
2216
2038
2387
1732
1500
1643
mA @
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6.3
6.3
6.3
10
16
16
20
20
20
25
25
35
35
35
35
35
35
35
50
50
50
30
23
23
35
40
40
35
40
45
45
50
100
80
60
65
55
65
50
90
120
100
7.7
7.7
11.6
16.5
16.5
16.5
5.0
955
693
600
657
125
125
125
10
22
5.0
11.0
% @ +20ºC mΩ @ +20ºC
120 Hz
Max
mA @
Reflow
Temp
≤ 260ºC
(See below for
part options)
µA @ +20ºC
Max/5 Min
VDC @ 85ºC
µF
KEMET/EIA
100 kHz
Max
+25ºC 100 +85ºC 100 +125ºC 100
ºC
kHz
kHz
kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DC
Leakage
Maximum Allowable
Ripple Current
KEMET Part Number
DF
ESR
MSL
(1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
5
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
120ꢀ
100ꢀ
ꢃ0ꢀ
ꢂ0ꢀ
ꢁ0ꢀ
20ꢀ
0ꢀ
Recommended Voltage Derating Guidelines
−55°C to 85°C
85°C to 125°C
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
VR
67% of VR
33% of VR
ꢀ Cꢄanꢅe in ꢆorꢇinꢅ ꢈC ꢉoltaꢅe
witꢄ Temperature
ꢂꢊꢀ
ꢋꢋꢀ
50% of VR
Recommended Maꢌimum
Application ꢉoltaꢅe
ꢍAs ꢀ of Rated ꢉoltaꢅeꢎ
−55
25
ꢃ5
125
ꢇeꢈꢉeratꢊre ꢋꢌCꢍ
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specified for reverse voltage. See the Reverse Voltage
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
KEMET Series
and Case Code
EIA
Case Code
A
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
B
85
C
110
150
165
200
60
D
X
E
S
T
70
U
90
V
125
270
285
T510X
T510E
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
Temperature Compensation Multipliers
for Maximum Ripple Current
I(max) = √P max/R
T ≤ 25°C
T ≤ 85°C
T ≤ 125°C
E(max) = Z √P max/R
1.00
0.90
0.40
T= Environmental Temperature
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
6
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
E1
7360–38 4.25
7343–43 2.55
2.77
3.67 10.22 7.30
3.67 10.22 5.60
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
X1
2.77
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
ꢁ1
L
L
ꢁ2
ꢀ
ꢀ
S
Grid ꢂlacement Courtꢃard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
7
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Soldering Process
KEMET’s families of surface mount capacitors are
compatible with wave (single or dual), convection, IR,
or vapor phase reflow techniques. Preheating of these
components is recommended to avoid extreme thermal
stress. KEMET's recommended profile conditions for
convection and IR reflow reflect the profile conditions of the
IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
Profile Feature
Preheat/Soak
SnPb Assembly Pb-Free Assembly
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
Time Above Liquidous (tL)
183°C
217°C
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
Hand soldering should be performed with care due to the
difficulty in process control. If performed, care should be
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflow occurs. Once reflow occurs, the iron should be
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Tꢁ
tꢁ
Maꢀimum Ramp ꢂp Rate ꢃ ꢄꢅCꢆsec
Maꢀimum Ramp ꢇown Rate ꢃ ꢈꢅCꢆsec
TL
tL
Tsmaꢀ
During typical reflow operations, a slight darkening of the
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Tsmin
ts
25
25ꢅC to ꢁeaꢉ
ꢀiꢁe
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum
storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation
on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip
stock should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
8
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Construction
ꢇolaritꢆ Stripe ꢀꢃꢂ
Molded Epoꢅꢆ
Case
ꢀetaileꢁ Crꢂss ꢃectiꢂꢄ
Silver ꢇaint
ꢀꢉourtꢁ Laꢆerꢂ
ꢇolaritꢆ
ꢈevel ꢀꢃꢂ
Tantalum ꢄire
Leadframe
ꢀ− Catꢁodeꢂ
ꢄasꢁer
Tantalum ꢄire
ꢄeld
ꢀto attacꢁ wireꢂ
Carꢋon
ꢀTꢁird Laꢆerꢂ
ꢄasꢁer
Silver Adꢁesive
MnO2
ꢀSecond Laꢆerꢂ
Ta2O5 ꢊielectric
ꢀꢉirst Laꢆerꢂ
Leadframe
ꢀꢃ Anodeꢂ
Molded Epoꢅꢆ
Tantalum
Case
Capacitor Marking
Date Code *
1st digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
ꢅEMET
MultiꢆAnode
MnO2
ꢇolaritꢈ
ꢉndicator ꢊꢋꢌ
ꢇicofarad
Code
2nd and 3rd digit = Week of the
01 = 1st week of the Year to
52 = 52nd week of the Year
ꢅEMET
ꢉꢏ
Rated
ꢍoltaꢎe
Year
ꢏate
Codeꢀ
ꢀ 2ꢁ0 ꢂ ꢁ0tꢃ weeꢄ of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016
9
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
Top Tape Thickness
or
0.10 mm (0.004")
330 mm (13.0")
Maximum Thickness
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel* 13" Reel*
(mm)
KEMET
EIA
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
8
8
8
12
12
12
12
12
8
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
8
12
12
12
12
12
12
12
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 10
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
ꢀ 2
ꢎ10 pitcꢏes cumulative
tolerance on tape ꢐ 0ꢑ2 mmꢒ
2
E
1
ꢀo
ꢉꢊo
Ao
ꢁ
ꢅo
ꢂ
E
2
ꢄ
1
ꢄo
S
1
ꢀ
1
T
1
Emꢈossment
ꢁor cavitꢃ siꢋeꢆ
see ꢌote 1 Taꢈle ꢍ
Center Lines of Cavitꢃ
ꢉꢊ
1
Cover Tape
is for tape feeder reference onlꢃꢆ
includinꢇ draft concentric aꢈout ꢄ
ꢄ
1
o
.
ꢀser ꢁirectiꢂꢃ ꢂꢄ ꢀꢃreeliꢃꢅ
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
R Reference S1 Minimum
T1
Tape Size
D0
E1
P0
P2
T Maximum
Note 2
25.0
Note 3
Maximum
8 mm
12 mm
16 mm
2.0±0.05
(0.079±0.002)
(0.039)
(0.984)
1.5+0.10/−0.0
(0.059+0.004/−0.0)
1.75±0.10
(0.069±0.004) (0.157±0.004)
4.0±0.10
0.600
0.600
(0.024)
0.100
(0.004)
1.5
(0.059)
30
(0.024)
2.0±0.1
(0.079±0.059)
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
Tape Size
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum A0, B0 & K0
4.35
(0.171)
6.25
(0.246)
3.5±0.05
2.0±0.05 or 4.0±0.10
2.5
(0.098)
8.3
(0.327)
8 mm
Single (4 mm)
(0.138±0.002) (0.079±0.002 or 0.157±0.004)
Single (4 mm)
& Double (8
mm)
2.0±0.05 (0.079±0.002) or
8.2
(0.323)
10.25
(0.404)
5.5±0.05
4.6
(0.181)
12.3
(0.484)
12 mm
16 mm
4.0±0.10 (0.157±0.004) or
(0.217±0.002)
Note 5
8.0±0.10 (0.315 ±0.004)
12.1
(0.476)
14.25
(0.561)
7.5±0.10
4.0±0.10 (0.157±0.004)
(0.295±0.004) to 12.0±0.10 (0.472±0.004)
16.3
(0.642)
Triple (12 mm)
8.0 (0.315)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see
Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 11
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ
ꢈꢄꢅ ꢉieꢊ
ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ
ꢋiꢌe ꢉieꢊ
Tꢅpical ꢆocꢇet Centerline
ꢈaꢅe
ꢀaꢁiꢂꢃꢂ
°
°
T
s
ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ
)
ꢁꢂ12
1ꢃ – 200
20
10
ꢀo
ꢈaꢅe
ꢀaꢁiꢂꢃꢂ
°
S
ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ
)
ꢁꢂ12
1ꢃ – 5ꢃ
ꢄ2 – 200
20
10
5
Tꢅpical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Emꢂossed
Carrier
ꢃuncꢄed
Carrier
ꢂ mm ꢃ 12 mm Tape
1ꢄ mm Tape
0ꢀ5 mm maꢁimum
0ꢀ5 mm maꢁimum
1ꢀ0 mm maꢁimum
1ꢀ0 mm maꢁimum
R
ꢀendinꢁ
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 12
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Figure 5 – Reel Dimensions
ꢄull Radiusꢅ
See ꢂote
ꢏꢐ ꢁꢊncludes
flanꢑe distortion
at outer edꢑeꢃ
Access ꢇole at
Slot Location
ꢁꢈ ꢉ0 mm minimumꢃ
ꢏ2 ꢁMeasured at ꢍuꢒꢃ
ꢀ
ꢁSee ꢂoteꢃ
A
ꢂ
C
ꢁArꢒor ꢍole
ꢏ1 ꢁMeasured at ꢍuꢒꢃ
diameterꢃ
ꢊf presentꢅ
tape slot in core
for tape startꢋ
2ꢌ5 mm minimum widtꢍ ꢎ
10ꢌ0 mm minimum deptꢍ
ꢆ
ꢁsee ꢂoteꢃ
ꢂoteꢋ ꢀrive spoꢓes optionalꢔ if usedꢅ dimensions ꢆ and ꢀ sꢍall applꢕꢌ
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178±0.20
(7.008±0.008)
or
330±0.20
(13.000±0.008)
1.5
(0.059)
13.0+0.5/−0.2
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
(0.488+0.078/−0.0)
16.4+2.0/−0.0
14.4
(0.567)
18.4
(0.724)
22.4
8 mm
50
(1.969)
Shall accommodate tape
width without interference
12 mm
16 mm
(0.646+0.078/−0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 13
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Emꢌossed Carrier
Carrier Tape
ꢇuncꢈed Carrier
ꢉ mm ꢊ 12 mm onlꢋ
Round Sprocꢁet ꢂoles
ꢂꢃꢄꢅꢃ
Eꢀꢁ
Top Cover Tape
Elonꢃated Sprocꢁet ꢂoles
ꢄꢅ2 mm tape and widerꢆ
100 mm
Minimum Leader
ꢍ00 mm Minimum
Trailer
Components
1ꢀ0 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elonꢅated sprocꢀet ꢄoles
ꢆꢇ2 mm ꢈ wider tapesꢉ
Carrier Tape
Round Sprocꢀet ꢁoles
1 mm Maꢂimumꢃ eitꢄer direction
Straiꢅꢄt Edꢅe
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 14
Tantalum Surface Mount Capacitors – Automotive Grade
T510 Series Automotive Grade Multiple Anode Low ESR MnO2
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2055_T510_AUTO • 9/19/2016 15
相关型号:
©2020 ICPDF网 联系我们和版权申明