SCF-02-350JH [KEMET]

Mains Filter,;


型号：	SCF-02-350JH
厂家：	KEMET CORPORATION
描述：	Mains Filter,
文件：	总9页 (文件大小：843K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AC Line Filters

Common Mode SCF Coils, SCF Series, Terminal Base Type

Overview

Applications

The KEMET SCF coils are common mode chokes with a

wide variety of characteristics. These toroidal coils are

designed with nanocrystalline metal cores and are useful in

variousꢀnoiseꢀcountermeasureꢀﬁelds.

• Audio-visual equipment

• Industrial equipment

• Home appliances

• Power supplies

Beneﬁts

• Nanocrystalline metal core

• Ultra-high inductance

• Ultra-high permeability

•ꢀ Operatingꢀtemperatureꢀrangeꢀfromꢀ−25°Cꢀtoꢀ+120°C

•ꢀ ULꢀ94ꢀV–0ꢀﬂameꢀretardantꢀratedꢀbaseꢀandꢀcap

Part Number System

SCF

Series

SCF

31B-

Dimension Code

(See Dimensions)

200-

Rated Current

(A)

2R0

Wire Diameter

(mm)

020

Inductance (mH)

Internal Control

Code

Windings

Terminal Base Type

Minimum

Blank

0x = x A

xxx = xx.x A

Blank

R = Decimal

point

Blank

A = Single

C = Triple

xxxx = xx.xx mH

xxx = xx.xmH

xx = x.x mH

J = Vertical type

JH = Horizontal type

Blank

31B

33B

47B

47C

Examples:

02 = 2 A

025 = 2.5 A

200 = 20.0 A

Examples:

0R8 = 0.8 mm

2R0 = 2.0 mm

Examples:

1100 = 11.00 mH

020 = 2.0 mH

65 = 6.5 mH

One world. One KEMET

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Magnetic Permeability of Ferrite Material

Inꢀorderꢀtoꢀachieveꢀmostꢀeﬃcientꢀnoiseꢀreduction,ꢀitꢀisꢀimportantꢀtoꢀselectꢀtheꢀmaterialꢀaccordingꢀtoꢀtheꢀtargetꢀfrequencyꢀ

band. Depending on its magnetic permeability, a particular ferrite material or metal material will be effective in a certain

frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the

corresponding effective band range is shown in Figure 1.

Ferrite materials with higher magnetic permeability are effective in the lower frequency range, while those with lower

magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing

conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. Metal materials, however,

are effective throughout the broadband frequency range, in low as well as high frequencies.

The effective frequency range varies depending on core shape, size, and number of windings. This frequency dependence

ofꢀtheꢀmagneticꢀpermeabilityꢀasꢀshownꢀinꢀtheꢀﬁgureꢀservesꢀforꢀreferenceꢀpurposesꢀonly.ꢀItꢀshouldꢀbeꢀtestedꢀonꢀtheꢀactualꢀ

device to determine its effectiveness.

S18H, S15H, 10H, 7H, 5H, 1400L, and 700L are KEMET’s proprietary ferrite material names. Other materials are available

upon request.

Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range

ꢃiꢌꢐer maꢌnetiꢍ permeaꢎilityꢏ

ꢃiꢌꢐer noise sꢑppression eꢒꢒeꢍt in tꢐe ꢎroadꢎand ꢒreꢓꢑenꢍy ranꢌe

ꢔanoꢍrystalline Core

ꢅꢁ,ꢁꢁꢁ

ꢃiꢌꢐer maꢌnetiꢍ permeaꢎilityꢏ

ꢃiꢌꢐer noise sꢑppression eꢒꢒeꢍt

ꢉꢆ-ꢏꢆ ꢐerieꢑ

in tꢐe loꢋer ꢒreꢓꢑenꢍy ranꢌe

Sꢀꢉꢃ

Sꢀꢊꢃ

Loꢋer maꢌnetiꢍ permeaꢎilityꢏ

ꢃiꢌꢐer noise sꢑppression eꢒꢒeꢍt

in tꢐe ꢐiꢌꢐer ꢒreꢓꢑenꢍy ranꢌe

ꢀꢁꢃ

ꢈꢃ

ꢀꢁ,ꢁꢁꢁ

ꢊꢃ

ꢎi-ꢏꢆ ꢐerieꢑ

ꢀꢇꢁꢁL

ꢈꢁꢁL

ꢁ

ꢀꢁ ꢂꢃꢄ

ꢀꢁꢁ ꢂꢃꢄ

ꢀ Mꢃꢄ

ꢀꢁ Mꢃꢄ

ꢀꢁꢁ Mꢃꢄ

ꢀ ꢆꢃꢄ

ꢀꢁꢁecꢂive ꢃreꢄꢅeꢆcꢇ Raꢆꢈe

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Dimensions – Millimeters

ꢀiꢁꢂre 1

ꢀiꢁꢂre 2

ꢃꢄ

ꢃ ꢄ

ꢆaꢇ

ꢀꢁ

ꢀꢂ

ꢀꢁ

ꢀ ꢂ

ꢆaꢇ

ꢆꢈꢇ

ꢆaꢇ

ꢆꢈꢇ

ꢀiꢁꢂre ꢃ

ꢀiꢁꢂre 3

ꢃ ꢄ

ꢆaꢇ

ꢅ

ꢆaꢇ

ꢀꢁ

ꢀ ꢂ

ꢀꢁ

ꢀꢂ

ꢆaꢇ

ꢆꢈꢇ

Dimensions

(mm)

Pin Pitch¹

(Reference)

Part Name

Figure

(Maximum) (Maximum) (Maximum)

SCF-02-130JV

SCF-02-350JH

SCF12-025-1100J

15.0

16.0

15.0

28.5

70.0

48.0

50.0

70.0

63.0

14.0

15.0

12.0

14.0

23.0

42.0

50.0

15.0

15.5

16.0

15.0

28.5

38.0

35.0

36.5

61.0

4.5±1.0

3.0±0.5

3.1±0.5

3.5±1.0

5.0±2.0

4.0±1.0

5.0±2.0

6.0±3.0

4.5±1.5

5.00

5.08

6.00

5.00

18.00 16.00

44.00 32.00

10.00

7.62

10.00

Fig. 1

Fig. 2

Fig. 1

Fig. 3

Fig. 8

Fig. 5

Fig. 6

Fig. 7

Fig. 4

SCF-03-65JV

SCF19-040-0R8A1100J

SCF47B-600-2R2C0005JH

SCF31B-200-2R0A020JH

SCF33B-400-1R6C009JH

SCF47B-400-1R8C040J

SCF47C-400-1R8C040JH

45°

2.3

7.0

1.15

17.00

30.00

25.00 30.00

44.00 32.00

25.00 28.00

8.0

4.5

39.0

¹Pin pitch listed above for reference only. Values not guaranteed.

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Dimensions – Millimeters cont.

ꢀiꢁꢂre ꢅ

ꢀiꢁꢂre ꢄ

ꢃ ꢄ

ꢆaꢇ

ꢅ

ꢃ ꢄ

ꢆaꢇ

ꢅ

ꢆaꢇ

ꢀꢁ

ꢀꢂ

ꢀꢁ

ꢀꢂ

ꢀiꢁꢂre ꢇ

ꢀiꢁꢂre ꢆ

ꢃ ꢄ

ꢆaꢇ

ꢃ ꢄ

ꢅ

ꢆaꢇ

ꢀꢁ

ꢀꢂ

ꢆꢌꢊꢍ

ꢇ

Base ꢎole dimension

ꢀꢁ

ꢀꢂ

ꢆaꢇ

ꢆꢈꢇ

Dimensions

(mm)

Pin Pitch¹

(Reference)

Part Name

Figure

(Maximum) (Maximum) (Maximum)

SCF-02-130JV

SCF-02-350JH

SCF12-025-1100J

15.0

16.0

15.0

28.5

70.0

48.0

50.0

70.0

63.0

14.0

15.0

12.0

14.0

23.0

42.0

50.0

15.0

15.5

16.0

15.0

28.5

38.0

35.0

36.5

61.0

4.5±1.0

3.0±0.5

3.1±0.5

3.5±1.0

5.0±2.0

4.0±1.0

5.0±2.0

6.0±3.0

4.5±1.5

5.00

5.08

6.00

5.00

18.00 16.00

44.00 32.00

10.00

7.62

10.00

Fig. 1

Fig. 2

Fig. 1

Fig. 3

Fig. 8

Fig. 5

Fig. 6

Fig. 7

Fig. 4

SCF-03-65JV

SCF19-040-0R8A1100J

SCF47B-600-2R2C0005JH

SCF31B-200-2R0A020JH

SCF33B-400-1R6C009JH

SCF47B-400-1R8C040J

SCF47C-400-1R8C040JH

45°

2.3

7.0

1.15

17.00

30.00

25.00 30.00

44.00 32.00

25.00 28.00

8.0

4.5

39.0

¹Pin pitch listed above for reference only. Values not guaranteed.

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Environmental Compliance

AllꢀKEMETꢀACꢀlineꢀﬁltersꢀareꢀRoHSꢀCompliant.

Performance Characteristics

Item

Performance Characteristics

Rated Voltage

250 VAC/VDC and 500VAC/VDC

2,400 VAC (2 seconds, between lines)

>ꢀ100ꢀMΩꢀatꢀ500ꢀVDCꢀ(betweenꢀlines)

2 – 60 A

Withstanding Voltage

Insulation Resistance

Rated Current Range

Rated Inductance Range

Inductance Measurement Condition

Thermal Class

0.05 – 35 mH minimum

10 kHz, 50 kHz, and 100 kHz

Eꢀ(120°C)

Operating Temperature Range

−25°Cꢀtoꢀ+120°Cꢀ(includeꢀselfꢀtemperatureꢀrise)

Table 1 – Ratings & Part Number Reference

Rated

Voltage

AC/DC (V)

Rated

Current

(A)

Inductance DC Resistance/ Temperature

Wire

Diameter

(mm)

Weight

(g)

Part Number

(mH)

Line (mΩ)

Maximum

Rise (K)

Minimum

Maximum

Approximate

SCF-02-130JV

SCF-02-350JH

SCF12-025-1100J

250

500

2.0

2.5

3.0

4.0

60.0

20.0

40.0

13.00 ¹

35.00 ¹

11.90 ¹

6.50 ¹

11.00 ²

0.05 ³

2.00 ³

0.90 ³

4.00 ¹

115.00

220.00

82.60

70.00

0.31

0.45

0.40

0.45

0.50

0.80

5.0

5.4

5.0

SCF-03-65JV

4.0

SCF19-040-0R8A1100J

SCF47B-600-2R2C0005JH

SCF31B-200-2R0A020JH

SCF33B-400-1R6C009JH

SCF47B-400-1R8C040J

SCF47C-400-1R8C040JH

27.6

135.0

91.1

105.1

190.0

192.7

2.2 x 3 Parallel

2.00

1.60

1.8 x 3 Parallel

5.20

1.70

2.10

¹Inductance Measurement Condition: 10 kHz

²Inductance Measurement Condition: 50 kHz

³Inductance Measurement Condition: 100 kHz

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Frequency Characteristics

SCFꢄꢁꢅꢄꢀꢃꢁꢆꢇ

SCFꢄꢁꢅꢄꢃꢈꢁꢆꢉ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁ

ꢀꢁ

ꢀ

ꢀꢁ

ꢀ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

ꢀM

ꢀꢁM ꢃꢁM

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

ꢀM

ꢀꢁM ꢃꢁM

Frequency (Hz)

SCFꢀꢅꢄꢁꢅꢈꢄꢀꢀꢁꢁꢆ

SCFꢄꢁꢃꢄꢊꢈꢆꢇ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁ

ꢀꢁ

ꢀ

ꢀꢁ

ꢀ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

Frequency (Hz)

SCFꢀꢋꢄꢁꢌꢁꢄꢁꢍꢎAꢀꢀꢁꢁꢆ

SCFꢌꢏBꢄꢊꢁꢁꢄꢅꢍꢅCꢁꢁꢁꢈꢆꢉ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁ

ꢀꢁ

ꢀ

ꢀꢁ

ꢀ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

Frequency (Hz)

SCFꢃꢀBꢄꢅꢁꢁꢄꢅꢍꢁAꢁꢅꢁꢆꢉ

SCFꢃꢃBꢄꢌꢁꢁꢄꢀꢍꢊCꢁꢁꢋꢆꢉ

ꢀM

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁꢂ

ꢀꢁꢂ

ꢀꢂ

ꢀꢁꢁ

ꢀꢁ

ꢀ

ꢀꢁ

ꢀ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

ꢀꢂ

ꢀꢁꢂ

ꢀꢁꢁꢂ

Frequency (Hz)

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Frequency Characteristics cont.

SCFꢀꢁCꢂꢀꢃꢃꢂꢄꢅꢆCꢃꢀꢃꢇꢈ

SCFꢀꢁBꢂꢀꢃꢃꢂꢄꢅꢆCꢃꢀꢃꢇ

ꢄM

ꢄꢃꢃꢉ

ꢄꢃꢉ

ꢄꢉ

ꢄꢃꢃꢉ

ꢄꢃꢉ

ꢄꢉ

ꢄꢃꢃ

ꢄꢃ

ꢄ

ꢄꢃ

ꢄ

ꢄꢉ

ꢄꢃꢉ

ꢄꢃꢃꢉ

ꢄM

ꢄꢃM ꢊꢃM

ꢄꢉ

ꢄꢃꢉ

ꢄꢃꢃꢉ

ꢄM

ꢄꢃM ꢊꢃM

Frequency (Hz)

Packaging

Type

Packaging Type

Pieces Per Box

SCF-02-130JV

SCF-02-350JH

SCF12-025-1100J

SCF-03-65JV

360

600

1,080

360

240

SCF19-040-0R8A1100J

SCF47B-600-2R2C0005JH

SCF31B-200-2R0A020JH

SCF33B-400-1R6C009JH

SCF47B-400-1R8C040J

SCF47C-400-1R8C040JH

Tray

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

Handling Precautions

Precautions for product storage

AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other

environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and

long term storage.

KEMETꢀrecommendsꢀthatꢀmaximumꢀstorageꢀtemperatureꢀnotꢀexceedꢀ40°Cꢀandꢀmaximumꢀstorageꢀhumidityꢀnotꢀexceedꢀ70%ꢀ

relativeꢀhumidity.ꢀAtmospheresꢀshouldꢀbeꢀfreeꢀofꢀchlorineꢀandꢀsulfurꢀbearingꢀcompounds.ꢀTemperatureꢀﬂuctuationsꢀshouldꢀ

beꢀminimizedꢀtoꢀavoidꢀcondensationꢀonꢀtheꢀparts.ꢀAvoidꢀstorageꢀnearꢀstrongꢀmagneticꢀﬁelds,ꢀasꢀthisꢀmightꢀmagnetizeꢀtheꢀ

product.

Forꢀoptimizedꢀsolderability,ꢀACꢀlineꢀﬁltersꢀstockꢀshouldꢀbeꢀusedꢀpromptlyꢀandꢀpreferablyꢀwithinꢀ6ꢀmonthsꢀofꢀreceipt.

Product temperature rise values

The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency)

is applied.

When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

AC Line Filters – Common Mode SCF Coils, SCF Series, Terminal Base Type

KEMET Electronics Corporation Sales Oﬃces

Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀo ꢀꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.

Disclaimer

Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given

herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ

applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all

applicableꢀexportꢀlawsꢀandꢀregulations,ꢀincludingꢀwithoutꢀlimitationꢀtheꢀInternationalꢀTra ꢀꢀcꢀinꢀArmsꢀRegulationsꢀ(ITAR),ꢀtheꢀUSꢀExportꢀAdministrationꢀRegulationsꢀ

(EAR) and the Japan Foreign Exchange and Foreign Trade Act.

KEMET is a registered trademark of KEMET Electronics Corporation.

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

LF0079_SCF-J_JH • 5/6/2020

SCF-02-350JH [KEMET]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E