SS-430L-N [KEMET]
Photoelectric Sensor,;
| 型号： | SS-430L-N |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Photoelectric Sensor, 传感器 换能器 |
| 文件： | 总8页 (文件大小：538K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Proximity Sensors
SS Pyroelectric Infrared Sensor Modules
Overview
Applications
KEMET’s Pyroelectric Infrared Sensors use the pyroelectric
effect of ceramic by absorbing infrared rays emitted from
the human body. This detects the natural infrared signature
produced by humans. Also, it can detect infrared rays
without using lenses.
Typical applications include human presence detection
sensing for energy saving functions in:
• Contact less switching
• Office automation equipment
• Home applicances
• Lighting
Due to the absence of a lens, KEMET’s Pyro Sensor is low
profile, as it does not protrude, which makes it ideal for
gathering visual requirements. With KEMET’s proprietary
piezoelectric ceramic material and element structure of
the Pyroelectric Infrared Sensor, humans can be detected
through resin. This allows more freedom in the design of
the outer appearance of the end product.
• Display products
• Air-conditioners
• TV
• PC monitors
• Rice cookers
• Smart toilets
By adding a KEMET proprietary lens the detection distance
can be further improved. Three different color lenses also
enable some design flexibility. The sensors now packaged
in our module solution are even easier to install and the
driving being already included in the package, makes it
really just “plug and sense”.
Without lens module
Benefits
• Equipped with AMP circuit and comparator circuit
• Digital output
• Available with or without lens
• Flat top surface of the lens
• Microcomputer installed
• Connector mounting
• Excellent radio wave performance in high-frequency band
• Compact (15.00 x 15.00 x 5.65 mm)
Natural Lens
White Lens
Black Lens
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
1
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Ordering Information
SS-
430
L-N
Series
Module Type
Lens Type
Blank = Without lens
L-BK = With lens, black
L-N = With lens, natural
L-W = With lens, white
SS
430
Performance Characteristics
Detected Distance (m)
Without lens module
With lens module
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
2
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Dimensions
Without lens module
Dimensions in mm
Pin Assignment
ꢀꢁꢂ
ꢃꢁꢂ
ꢏꢐꢁꢅ
ꢃꢅ
ꢃꢁꢂ
ꢐꢁꢑꢅ
ꢐ
ꢐ
ꢅ
ꢃ
ꢐ
ꢃ
ꢇonnector
PꢈꢉꢊSMꢄꢅꢋꢌSꢍSSꢌꢎꢋ
ꢐ
Sensor
Pin No.
Pin Name
Remarks
1
2
3
4
5
Vin
3.5 ~ 5.5 VDC
TX
NC
NC
RX
Vout
GND
Comparator output
Ground
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
3
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Dimensions cont.
With lens module
Dimensions in mm
Pin Assignment
ꢕꢍꢋ
ꢊꢍꢋ
ꢎꢏꢍꢅ
ꢊꢅ
ꢏ
ꢓꢍꢒ
ꢌꢍꢌ
ꢅꢍꢌ
ꢏꢍꢒ
ꢏꢍꢒꢅ
ꢏ
ꢅ
ꢊ
ꢏ
ꢊ
ꢀonnector
PꢁꢂꢃSMꢄꢅꢆꢇSꢈSSꢇꢉꢆ
ꢏ
ꢊ
Sensor ꢐ ꢑens
Pin No.
Pin Name
Remarks
1
2
3
4
5
Vin
3.5 ~ 5.5 VDC
TX
NC
NC
RX
Vout
GND
Comparator output
Ground
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
4
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Environmental Compliance
All KEMET Pyroelectric Infrared Sensors are RoHS and REACH Compliant.
Article 33(1) of the REACH Regulation states that manufacturers and importers of articles (products) are required to notify
their customers of the presence of any Substances of Very High Concern (SVHC) in their products exceeding 0.1% by weight
and provide instructions on safe use of the product.
KEMET Corporation reports regarding the Article 33(1) of REACH Regulation as follows:
1. Applicable Product: Pyroelectric Infrared Sensors (SS series)
2. Report for the content of REACH SVHC list:
The product(s) above contains a substance by more than 0.1wt% per product weight that was published in the 8th update of
the REACH SVHC substances (December 19, 2012).
3. Regarding the safety of the pyroelectric infrared sensors (Piezoceramic products):
The Piezoceramic that is used in this product becomes ceramic by sintering powder containing PZT as the main ingredient. It
is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. Please
note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics.
4. Technical product information on the multilayer piezoelectric actuators (Piezoceramic products):
The manufacturing technique of the “piezoceramic products” whose main ingredient is Lead Titanium Zirconium Oxide (PZT)
has been established, and there is no alternative material that can exhibit superior performance than PZT at this moment.
Please note that the piezoceramic is listed as an exempt on RoHS (2011/65/EU) AnnexIII (7c.1).
5. The responsibility of piezoceramic manufacturers:
Piezoceramic manufacturers report information regarding PZT containment in their products to the customers to obey the
article 33 of the REACH regulation
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
5
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Table 1 – Ratings & Part Number Reference
Detection
Output
Voltage
on Time
(secs)
Warm
Supply
Voltage
(VDC)
Output
Voltage
(VDC)
Consumption
Current (μA)
Maximum
Part
Number
up Time1
Field
Lens
Color
Weight
(g)
(secondss) of View (°)
Maximum
Detection : 3.0
Non-Detection : 0.0
Horizontal: ±60°
Vertical : ±60°
SS–430
3.5 ~ 5.5
3.5 ~ 5.5
3.5 ~ 5.5
3.5 ~ 5.5
800
800
800
800
0.2
0.2
0.2
0.2
30
-
0.7
0.8
0.8
0.8
Detection : 3.0
Non-Detection : 0.0
Horizontal: ±37°
Vertical : ±28°
SS–430L–N
SS–430L–BK
SS–430L–W
30
Natural
Black
White
Detection : 3.0
Non-Detection : 0.0
Horizontal: ±37°
Vertical : ±28°
30
Detection : 3.0
Non-Detection : 0.0
Horizontal: ±37°
Vertical : ±28°
30
1 The warm up time is defined by the time needed for the source voltage to reach a rated value after the sensor’s power supply has been turned on.
Applications
Non-contact Switch
ꢄꢅassis surface
ꢆresinꢇ
ꢀꢁ ꢂ ꢃꢁ cm
Pꢄꢈ
Sensor
Detecting distance will vary by the chassis material used.
Common Application
Polyetꢄylene
ꢀ ꢁ ꢂ m
ꢃꢄassis surface
Pꢃꢅ
Sensor
Detecting distance increased to a few meters by using a polyethylene plate.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
6
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
Applications cont.
Use of Lens for up to 5 m Detection
ꢄens
ꢀ ꢁ m
ꢂꢃassis surface
Pꢂꢅ
Sensor
A lens is required to detect up to 5 m.
Detecting range variations will depend on the usage environment.
Tape & Reel Packaging Information
Series
Packaging Type
Pieces per Tray
Pieces per Box
SS
Tray
50
200
Handling Precautions
Pyroelectric Infrared Sensors should be kept away from indirect and direct sunlight, the headlights of cars, wind, and
exposure to strong vibration and strong shock. Do not use in water, alcohol ETA, corrosive gas or undersea breeze. Do not
drop or apply any mechanical stress.
Pyroelectric Infrared Sensors should be stored in normal working environments. Solderability will be degraded by exposure
to high temperatures, high humidity, corrosive atmospheres, and long-term storage. KEMET recommends that maximum
storage temperature not exceed 25°C and maximum storage humidity not exceed 50% relative humidity. Atmospheres
should be free of chlorine and sulfur-bearing compounds.
Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability sensors
stock should be used promptly, preferably within six months of receipt.
Export Control
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export
license specified by the law is required for export.
For customers outside Japan
Sensors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional
weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other
weapons.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
7
Proximity Sensors – SS Pyroelectric Infrared Sensor Modules
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SE0208_SS • 2/12/2019
8
相关型号：
©2020 ICPDF网 联系我们和版权申明