T540B10765004AH20 [KEMET]
CAPACITOR, TANTALUM, SOLID;型号: | T540B10765004AH20 |
厂家: | KEMET CORPORATION |
描述: | CAPACITOR, TANTALUM, SOLID |
文件: | 总18页 (文件大小:1486K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Reliability KEMET Organic Capacitor (KO-CAP)
T540 Polymer Commercial Off-the-Shelf (COTS)
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor The T540 Series KO-CAP offers the same advantages as the
with a Ta anode and Ta2O5 dielectric. A conductive organic
polymer replaces the traditionally used MnO2 as the cathode
T525 Series but is also designed for the Commercial Off-the-Shelf
(COTS) requirements of defense and aerospace applications. This
plate of the capacitor. This results in very low ESR and improved surface mount product offers a tin lead (SnPb) leadframe finish,
capacitance retention at high frequency. The KO-CAP may
also be operated at steady state voltages at up to 90% of rated
voltage for part types with rated voltages of ≤ 10 volts and up to
80% of rated voltage for part types > 10 volts.
surge current testing options and standard or low ESR levels.
Benefits
• Polymer cathode technology
• 125°C maximum operating temperature
• High frequency capacitance retention
• Benign failure mode
• Self-healing mechanism
• Volumetrically efficient
• Low ESR
• EIA standard case sizes
• Capacitance: 6.8 µF to 680 µF
• Voltage: 2.5 V to 50 V
• Use at up to 90% of rated voltage (10% derating)
for part types ≤ 10 V
• Use at up to 80% of rated voltage (20% derating)
for part types > 10 V
• Surge current testing options
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
1
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Ordering Information
T
540
D
107
M
10
A
H
65
10
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Series
Case Size
Voltage
Lead Material Surge Option
ESR
T =
540 =
B = 3528-21
First two digits
M = ±20%
2R5 = 2.5 V A = N/A
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
H = Standard
Solder Coated 66 = 10 cycles Standard
(SnPb 5% Pb
minimum)
65 = No Surge 10 = ESR -
Tantalum Polymer
COTS
D = 7343-31 represent significant
figures. Third digit
specifies number of
zeros.
@ 25°C
20 = ESR-Low
67 = 10 cycles
-55°C and
85°C
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
Applications
Typical applications include decoupling and filtering in defense and aerospace applications that require low ESR or a benign failure
mode.
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
-55°C to 125°C *
6.8 – 680 µF @ 120 Hz/25°C
M Tolerance (20%)
2.5 – 50 V
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
≤ 10%
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
≤ 0.1C V (µA) at rated voltage after 5 minutes
Leakage Current
* KEMET’s Polymer COTS (T540/T541 Series) capacitors are rated for operation between -55°C and +125°C. Parametric electrical performance remains within
stated specification limits after 1,000 hours of continuous operation and/or storage at +125°C. Long-term duty cycles or storage at or above +125°C may result in
an increase in ESR performance outside of the stated specification limits.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
2
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Qualification
Test
Condition
Characteristics
Within -20%/+10% of initial value
≤ initial limit
Δ C/C
DF
105°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Endurance
DCL
ESR
Δ C/C
DF
1.25 x initial limit @ 125ºC
2 x initial limit
Within -20%/+10% of initial value
Within initial limits
Storage Life
Humidity
125°C @ 0 volts, 2,000 hours
DCL
ESR
Δ C/C
DF
Within 2.0 x initial limit
Within 2.0 x initial limit
Within -5%/+35% of initial value
≤ initial limit
60°C, 90% RH, 500 hours, rated voltage
60°C, 90% RH, 500 hours, no load
DCL
+25°C
IL*
Within 3.0 x initial limit
-55°C
±20%
IL
+85°C
±20%
1.2 x IL
10 x IL
+125°C
±30%
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC
Δ C/C
DF
Temperature Stability
IL
1.5 x IL
10 x IL
DCL
IL
n/a
Δ C/C
DF
Within -20%/+10% of initial value
Within initial limits
Surge Voltage
105°C, 1.32 x rated voltage, 33 Ω resistance, 1,000 cycles
DCL
ESR
Δ C/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Mechanical Shock/Vibration
DCL
Within initial limits
Additional Qualification Tests
per MIL–PRF–55365/8
Please contact KEMET for more information.
*IL = Initial limit
Certification
MIL–PRF–55365/8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
3
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
100
1,000
100
10
T540D336M025AHE075_ Imp
T540D336M025AHE075_ESR
T540D686M016AHE075AH_Imp
T540D686M016AHE075_ESR
T540D107M016AHE050_Imp
T540D107M016AHE050_ESR
T540D336M025AHE075
T540D686M016AHE075
T540D107M016AHE050
10
1
0.1
0.01
100
1,000
10,000
100,000
1,000,000
10,000,000
100,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
100,000,000
Frequency (Hz)
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
F* ±0.1 S* ±0.3 B* ±0.15
±(0.004) ±(0.012) (Ref) ±0.006
KEMET EIA
L*
W*
H*
X (Ref)
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
3.5 ±02
2.8 ±0.2
1.9 ±0.2
0.10 ±0.10
(0.004 ±0.004)
0.10 ±0.10
(.004 ±0.004)
3528–21
2.2 (.087) 0.8 (.031)
2.4 (.094) 1.3 (.051)
0.4 (.016)
0.5 (.020)
0.5 (.020)
0.9 (.035)
1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
B
(138 ±0.008) (.110 ±0.008) (.075 ±0.008)
7.3 ± 0.3 4.3 ±0.3 2.8 ±0.3
(287 ±0.012) (.169 ±0.012) (098 ±0.012)
7343–31
D
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–C–55365/8 specified dimensions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
4
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Table 1 – Ratings & Part Number Reference
Capacitance
μF
Case
Size
Ripple Current (Arms)
100 kHz Maximum
KEMET Part Number DC Leakage
DF
ESR
% @ 25°C
120 Hz
Maximum
mΩ @ 25°C
100 kHz
Maximum
w/ΔT= 20°C
w/ΔT= 2°C
@ -55°C to
@ 125°C
μA @ 25°C
Maximum
105°C
2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)
330
470
680
D
D
D
T540D337(1)2R5AH(2)
T540D477(1)2R5AH(2)
T540D687(1)2R5AH(2)
83
118
170
10
10
10
25
25
25
2.4
2.4
2.4
0.8
0.8
0.8
3 Volt Rating at 105°C (2 Volt Rating at 125°C)
100
150
330
470
680
B
B
D
D
D
T540B107(1)003AH(2)
T540B157(1)003AH(2)
T540D337(1)003AH(2)
T540D477(1)003AH(2)
T540D687(1)003AH(2)
30
45
99
141
204
8
8
10
10
10
80
80
25
25
25
1
1
2.4
2.4
2.4
0.3
0.3
0.8
0.8
0.8
4 Volt Rating at 105°C (2.7 Volt Rating at 125°C)
68
B
B
D
D
D
D
T540B686(1)004AH(2)
T540B107(1)004AH(2)
T540D227(1)004AH(2)
T540D337(1)004AH(2)
T540D477(1)004AH(2)
T540D477(1)004AH(2)
28
40
88
132
188
188
8
8
10
10
10
10
80
80
25
25
25
40
1
1
2.4
2.4
2.4
1.9
0.3
0.3
0.8
0.8
0.8
0.6
100
220
330
470
470
6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C)
33
47
68
150
220
330
330
B
B
B
D
D
D
D
T540B336(1)006AH(2)
T540B476(1)006AH(2)
T540B686(1)006AH(2)
T540D157(1)006AH(2)
T540D227(1)006AH(2)
T540D337(1)006AH(2)
T540D337(1)006AH(2)
21
30
43
95
139
208
208
8
8
8
10
10
10
10
80
80
80
25
25
25
40
1
1
1
2.4
2.4
2.4
1.9
0.3
0.3
0.3
0.8
0.8
0.8
0.6
10 Volt Rating at 105°C (6.6 Volt Rating at 125°C)
22
33
B
B
D
D
D
D
D
T540B226(1)010AH(2)
T540B336(1)010AH(2)
T540D107(1)010AH(2)
T540D107(1)010AH(2)
T540D157(1)010AH(2)
T540D157(1)010AH(2)
T540D227(1)010AH(2)
22
33
8
8
80
80
25
55
25
55
25
1
1
0.3
0.3
0.8
0.5
0.8
0.5
0.8
100
100
150
150
220
100
100
150
150
220
10
10
10
10
10
2.4
1.7
2.4
1.7
2.4
16 Volt Rating at 105°C (10.6 Volt Rating at 125°C)
47
47
68
D
D
D
D
T540D476(1)016AH(2)
T540D476(1)016AH(2)
T540D686(1)016AH(2)
T540D107(1)016AH(2)
76
76
109
160
10
10
10
10
35
65
75
50
2.1
1.5
1.4
1.7
0.7
0.5
0.5
0.6
100
20 Volt Rating at 105°C (13.4 Volt Rating at 125°C)
22
33
D
D
T540D226(1)020AH(2)
T540D336(1)020AH(2)
44
66
10
10
75
75
1.4
1.4
0.5
0.5
T
540
D
107
M
10
A
H
65
10
Capacitor
Capacitance
Capacitance
Tolerance
Failure Rate/
Series
Case Size
Voltage
Lead Material Surge Option
ESR
Code (pF)
Class
Design
T =
540 =
B = 3528-21
First two digits
M = ±20%
2R5 = 2.5 V A = N/A
H = Standard
Solder Coated 66 = 10 cycles Standard
(SnPb 5% Pb
minimum)
65 = No Surge 10 = ESR -
Tantalum Polymer
D = 7343-31 represent significant
003 = 3 V
004 = 4 V
COTS
figures. Third digit
@ 25°C
67 = 10 cycles
-55°C and
85°C
20 = ESR-Low
specifies number of
006 = 6.3 V
010 = 10 V
016 = 16 V
zeros.
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
5
Roll Over for
Order Info.
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Table 1 – Ratings & Part Number Reference cont'd
Capacitance
μF
Case
Size
Ripple Current (Arms)
100 kHz Maximum
KEMET Part Number DC Leakage
DF
ESR
% @ 25°C
120 Hz
Maximum
mΩ @ 25°C
100 kHz
Maximum
w/ΔT= 20°C
w/ΔT= 2°C
@ -55°C to
@ 125°C
μA @ 25°C
Maximum
105°C
50 Volt Rating at 105°C (33.5 Volt Rating at 125°C)
10
10
D
D
T540D106(1)050AH(2)
T540D106(1)050AH(2)
50
50
10
10
100
125
1.2
1.1
0.4
0.4
Case
Size
Ripple Current (Arms)
100 kHz Maximum
Capacitance μF
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C and +85°C. Designates surge current option.
(2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option.
Please refer to Ordering Information for additional details.
Derating Guidelines
100%
95%
Maximum Transient Voltage
90%
85%
Recommended Application Voltage VR ≤ 10V
80%
75%
70%
65%
60%
55%
50%
Recommended Application Voltage VR > 10V
67%
60%
53%
-55
25
45
85
105
125
Temperature (° C)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended Transient
Voltage (1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended Transient
Voltage (1 ms – 1 µs)
Voltage
Rating
-55°C to 105°C
105°C to 125°C
2.5 V ≤ VR ≤ 10 V
90% of VR
VR
60% of VR
67% of VR
T
540
D
107
M
10
A
H
65
10
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Series
Case Size
Voltage
Lead Material Surge Option
ESR
T =
540 =
B = 3528-21
First two digits
M = ±20%
2R5 = 2.5 V A = N/A
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
H = Standard
Solder Coated 66 = 10 cycles Standard
(SnPb 5% Pb
minimum)
65 = No Surge 10 = ESR -
Tantalum Polymer
COTS
D = 7343-31 represent significant
figures. Third digit
specifies number of
zeros.
@ 25°C
20 = ESR-Low
67 = 10 cycles
-55°C and
85°C
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
6
Roll Over for
Order Info.
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the
device. Permissible AC ripple voltage which may be applied is limited by two criteria:
a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
b. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for
reverse voltage. See the Reverse Voltage section for allowable limits.
The maximum power dissipation by case size can be determined using the below table. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental operating temperatures. Refer to the below table for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
Case Code
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
KEMET
EIA
T= Environmental Temperature
T520T/T525T/T540T/
T543T
3528–12
105
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
T520M/T543M
3528–15
3216–18
120
112
T520A/T543A
T520B/T525B/T540B/
T543B
3538–21
127
I(max) = √P max/R
E(max) = √P max R
T520U/T543U
6032–15
3528–19
6032–28
7343–15
135
150
165
180
*
T520L/T543L
T520C/T543C
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
T520W/T545W/T543W
T520V/T521V/T522V/
T545V/T543V
T520D/T521D/T525D/
T540D/T545D/T543D
T520Y/T522Y/T525Y/
T543Y
7343–20
7343–31
7343–40
7343–43
187
225
241
247
T520X/T521X/T545X/
T543X
T545E
7260–38
7260–20
3216–10
3528–10
7343–15
7343–17
345
187
95
T520H/T545H/T543H
T528I
T528K
150
325
325
T528W
T528Z
T530/T541D
7343–31
255
T530/T541Y
T530/T541X
7343–40
7443–43
263
270
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
7
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
85°C
105°C
125°C*
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Density Level A:
Maximum (Most)
Density Level B:
Median (Nominal)
Density Level C:
Minimum (Least)
KEMET
Code
Land Protrusion (mm)
Land Protrusion (mm)
Land Protrusion (mm)
Case
A
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
3216–18
3258–19
6032–25
7343–31
7260-20
7260–38
2012–12
3216–12
3258–12
6032–15
7343–20
7343–43
7343–35
1.35
2.35
2.35
2.55
4.25
4.25
1.05
1.35
2.35
2.35
2.55
2.55
2.55
2.15
2.15
2.65
3.75
2.65
2.65
1.80
2.15
2.15
2.65
3.75
3.75
3.75
1.45
1.45
2.60
2.70
3.20
3.20
1.00
1.45
1.45
2.60
2.70
2.70
2.70
6.10
2.80
4.00
4.40
5.50
7.20
7.20
2.40
2.80
4.00
4.40
5.50
5.50
5.50
1.25
2.25
2.25
2.45
4.15
4.15
0.95
1.25
2.25
2.25
2.45
2.45
2.45
1.75
1.75
2.25
3.35
2.25
2.25
1.45
1.75
1.75
2.25
3.35
3.35
3.35
1.35
1.35
2.50
2.60
3.30
3.30
0.90
1.35
1.35
2.50
2.60
2.60
2.60
5.00
5.00
7.80
9.10
9.40
9.40
3.80
5.00
5.00
7.80
9.10
9.10
9.10
2.30
3.50
3.90
5.00
6.70
6.70
1.90
2.30
3.50
3.90
5.00
5.00
5.00
1.15
2.15
2.15
2.35
4.05
4.05
0.85
1.15
2.15
2.15
2.35
2.35
2.35
1.35
1.35
1.85
2.95
1.85
1.85
1.05
1.35
1.35
1.85
2.95
2.95
2.95
1.25
1.25
2.40
2.50
3.00
3.00
0.80
1.25
1.25
2.40
2.50
2.50
2.50
4.10
4.10
6.90
8.20
8.10
8.10
2.90
4.10
4.10
6.90
8.20
8.20
8.20
2.00
3.20
3.60
4.70
6.40
6.40
1.60
2.00
3.20
3.60
4.70
4.70
4.70
B
6.10
C
8.90
10.20
10.10
10.10
4.80
6.10
D
H
E¹
R
S²
T
6.10
U
8.90
10.20
10.20
10.20
V
X¹
Y¹
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
8
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Soldering Process
KEMET’s families of surface mount capacitors are compatible
Profile Feature
SnPb Assembly Pb-Free Assembly
with wave (single or dual), convection, IR, or vapor phase reflow
Preheat/Soak
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
profile conditions for convection and IR reflow reflect the profile
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reflow passes at these conditions.
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
3°C/seconds maximum
183°C
60 – 120 seconds
3°C/seconds maximum
217°C
Liquidous Temperature (TL)
Time Above Liquidous (tL)
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum
6°C/seconds maximum
6 minutes maximum
30 seconds maximum
6°C/seconds maximum
8 minutes maximum
Ramp-down Rate (TP to TL)
Time 25°C to Peak Temperature
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
TL
tL
During typical reflow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
T
smax
T
smin
tS
25
25ºC to Peak
Time
Construction
Polymer /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
Leadframe
(-Cathode)
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012
9
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Capacitor Marking
(KT)
KEMET
High
Temp
Polymer
Polarity
Indicator (+)
KT
Picofarad Code
KEMET ID
PWC*
686
6 K
030
Rated
Voltage
* 030 = 30th week of 2010
Storage
All KO-CAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 10
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
Top Tape Thickness
or
0.10 mm (0.004")
330 mm (13.0")
Maximum Thickness
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel*
13" Reel*
(mm)
KEMET
EIA
R
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
X
2012-12
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7260-38
8
8
8
8
8
12
12
12
12
12
8
2,500
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
10,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
8
12
12
12
12
12
500
500
500
500
E/T428P
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 11
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 4
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
R Reference S1 Minimum
Tape Size
8 mm
D0
E1
P0
P2
T Maximum T1 Maximum
Note 2
Note 3
25.0
(0.984)
(0.039)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
3.5 ±0.05
4.0 ±0.10
2.5
(0.098)
4.6
8.3
(0.327)
12.3
Single (4 mm)
(0.138 ±0.002) (0.157 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
Single (4 mm) &
Double (8 mm)
12 mm
16 mm
Note 5
(0.181)
4.6
(0.484)
16.3
Triple (12 mm)
(0.561)
(0.181)
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 12
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16 – 200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16 – 56
72 – 200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 13
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Figure 5 – Reel Dimensions
Full Radius,
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
See Note
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12 mm
16 mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 14
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Round Sprocket Holes
Punched Carrier
8 mm & 12 mm only
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm
Minimum Leader
400 mm Minimum
Trailer
160 mm Minimum
Components
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 15
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
Madrid, Spain
Tel: 34-91-804-4303
North America
Southeast Asia
Singapore
Tel: 65-6586-1900
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Dortmund, Germany
Tel: 49-2307-3619672
West Chester, PA
Tel: 610-692-4642
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Novi, MI
Tel: 248-994-1030
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Carmel, IN
Tel: 317-706-6742
Weymouth, United Kingdom
Tel: 44-1305-830747
West
Milpitas, CA
Tel: 408-433-9950
Coatbridge, Scotland
Tel: 44-1236-434455
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 16
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
Search Our FAQs: KnowledgeEdge
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
http://www.kemet.com/sample
http://www.kemet.com/kits
Sample Request
Engineering Kit Request
Contact
Resource
Location
Website
Contact Us
Investor Relations
Call Us
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 17
Tantalum Surface Mount Capacitors
High Reliability KEMET Organic Capacitor (KO-CAP) – T540 Polymer Commercial Off-the-Shelf (COTS)
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy
Brand, email=marcybrand@kemet.com
Date: 2012.07.16 08:21:38 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2022_T540 • 7/13/2012 18
相关型号:
©2020 ICPDF网 联系我们和版权申明