66101A-J03 [KEYSIGHT]
66000A 1200 W DC Modular Power System,GPIB;型号: | 66101A-J03 |
厂家: | Keysight Technologies |
描述: | 66000A 1200 W DC Modular Power System,GPIB |
文件: | 总8页 (文件大小:203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Keysꢀght Technologꢀes
66000A 1200 W DC
Modular Power System,GPIB
Speed and accuracy for test optimization
– 8-slot mainframe accepts up to 8 DC
power modules
– 1200 W total DC power output, up to 150 W
per module
– Reconigure fast wꢀth easꢀly swappable modules
– Fast, low-noise outputs
– LIST mode and advance trꢀggerꢀng system
– Optional isolation and polarity reversal relays
– Built-in measurements and advanced
programmable features
– Protection features to ensure DUT safety
Data Sheet
02 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
66000 modular power system
Multiple mainframes at One GPIB address
The Keysight serial link feature will allow you to control up to
16 outputs at one GPIB address by connecting an auxiliary
mainframe. The serial link cable comes standard with the
66000 MPS mainframe. For applications with a broader range of
power requirements, one 66000 mainframe can be connected with
up to eight of the 6640, 6650, 6670, 6680, 6690 or 6030 series of
system power supplies. This solution provides power ranges from
150 watts to 5000 watts at one primary GPIB address.
Keysight Technologies, Inc. 66000 modular power system simplifies
test-system assembly, cabling, programming, debugging and
operation. It is ideal for ATE and production test environments,
where it can supply bias power and stimulus to subassemblies and
final products. The modular power system saves rack space, the
7-inch-high (4-EIA units) mainframe can accommodate up to eight
DC power modules.
Key features
– GPIB-programmable voltage and current
Output connections
System assembly is simplified thanks to a quick-disconnect connector
assembly on each module. Once your wires are connected to the
load, the connector design permits the modules to be removed
from the front of the mainframe without disconnecting cabling or
removing the mainframe from the rack. One connector assembly is
shipped with each module.
– Programmable over-voltage and over-current protection
– Self-test initiated at power-up or from GPIB command
– Electronic calibration over GPIB or from keyboard
– Over-temperature protection
– Discrete fault indicator/remote inhibit (DFI/RI)
– Five nonvolatile store-recall states per output
– User-definable power-on state
Output sequencꢀng
Increase test throughput by using the output sequencing feature
of the 66000 MPS. This powerful feature allows you to download
up to 20 voltage, current, and dwell-time parameter sets per output.
This sequence can be paced by the programmed dwell times. As
an alternative, triggers can be used to step through the output
list. The output sequences can be executed without controller
intervention, thereby increasing overall test system throughput.
03 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
Specꢀicatꢀons
Specifications
66101A
(at 0 ° to 55 °C unless otherwise specified)
66102A
66103A
66104A
66105A
66106A
Output ratings at 40°C
Output voltage
Output current
Maximum power
0 to 8 V
0 to 16 A
128 W
0 to 20 V
0 to 7.5 A
150 W
0 to 35 V
0 to 4.5 A
150 W
0 to 60 V
0 to 2.5 A
150 W
0 to 120 V
0 to 1.25 A
150 W
0 to 200 V
0 to 0.75 A
150 W
Programming accuracy (at 25 °C 5 °C)
Voltage
Current
0.03% +
0.03% +
3 mV
6 mA
8 mV
3 mA
13 mV
12 mA
27 mV
54 mV
90 mV
1.2 mA
0.6 mA
0.4 mA
Readback accuracy (via GPIB or keyboard dis-
play at 25 °C 5 °C)
Voltage
Current
0.02% +
0.02% +
2 mV
6 mA
5 mV
3 mA
8 mV
2 mA
16 mV
1 mA
32 mV
54 mV
0.6 mA
0.3 mA
Ripple and noise from 20 Hz to 20 MHz
Constant voltage
rms
2 mV
5 mV
8 mA
3 mV
7 mV
4 mA
5 mV
10 mV
2 mA
9 mV
15 mV
1 mA
18 mV
25 mV
1 mA
30 mV
50 mV
1 mA
peak-to-peak
rms
Constant current
Line regulation
Voltage
0.5 mV
0.5 mV
0.5 mA
1 mV
2 mV
3 mV
5 mV
Current
0.75 mA
0.2 mA
0.1 mA
50 µA
30 µA
Load regulation
Voltage
1 mV
1 mV
1 mV
2 mV
4 mV
7 mV
Current
0.5 mA
0.2 mA
0.2 mA
0.1 mA
50 µA
30 µA
Transient response time
Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any
step change in load current up to 10 percent of the power module rated output current
Supplemental Characteristics
66101A
66102A
66103A
66104A
66105A
66106A
(Non-warranted characteristics determined
by design and useful in applying the product)
Average programming resolution
Voltage
2.4 mV
4.6 mA
50 mV
250 mV
5.9 mV
2.3 mA
120 mV
500 mV
10.4 mV
1.4 mA
200 mV
800 mV
18.0 mV
0.75 mA
375 mV
1 V
36.0 mV
0.39 mA
750 mV
1.5 V
60.0 mV
0.23 mA
1.25 mV
2.5 V
Current
Over voltage protection(OVP)
OVP accuracy
04 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
Specꢀicatꢀons, continued
Specifications
66101-J03
66101-J05
66101-J05
66103-J01
66103A-J02
(at 0 ° to 55 °C unless otherwise specified)
Special order
option
Special order
option
Special order
option
Special order
option
Special order
option
Output ratings at 40°C
Output voltage
5.7 V
20 A
12 V
15 V
37 V
40 V
Output current
12 A
10 A
4.5 A
167 W
3.6 A
144 W
Maximum power
114 W
144 W
150 W
Programming accuracy (at 25 °C 5 °C)
Voltage
Current
0.03% +
0.03% +
2.5 mV
8 mA
5 mV
6 mA
8 mV
4 mA
13 mV
2 mA
15 mV
2 mA
Readback accuracy (via GPIB or keyboard
display at 25 °C 5 °C)
Voltage
Current
0.02% +
0.02% +
2 mV
8 mA
3 mV
6 mA
5 mV
4 mA
8 mV
2 mA
9.2 mV
2 mA
Ripple and noise from 20 Hz to 20 MHz
Voltage
rms
2 mV
5 mV
10 mA
3 mV
7 mV
8 mA
3 mV
7 mV
6 mA
5.3 mV
10.6 mV
2 mA
6 mV
peak-to-peak
rms
11.5 mV
2 mA
Current
Line regulation
Voltage
0.5 mV
0.5 mA
0.5 mV
0.5 mV
0.5 mA
1 mV
1 mV
Current
0.75 mA
0.3 mA
0.3 mA
Load regulation
Voltage
1 mV
1 mA
1 mV
1 mV
1 mV
1 mV
Current
0.5 mA
0.3 mA
0.2 mA
0.2 mA
Transient response time
Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any
step change in load current up to 10 percent of the power module rated output current
Supplemental Characteristics
66101-J03
66101-J05
66101-J05
66103-J01
66103A-J02
(Non-warranted characteristics determined
by design and useful in applying the product)
Special order
option
Special order
option
Special order
option
Special order
option
Special order
option
Average programming resolution
Voltage
Current
OVP
2 mV
6 mA
45 mV
3,6 mV
4.6 mA
75 mV
4.5 mV
31 mA
90 mV
11 mV
1.4 mA
200 mV
12 mV
1.2 mA
230 mV
OVP accuracy
250 mV
375 mV
375 mV
850 mV
920 mV
05 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
Specꢀicatꢀons, continued
66103A-J12
Specifications
66103A-J09
66104A-J09
66105A-J01
Special order
option
Special order
option
Special order
option
Special order
option
(at 0 ° to 55 °C unless otherwise specified)
Output ratings at 40°C
Output voltage
28.5 V
5.5 A
24 V
6 A
55 V
3 A
35 V
Output current
1.25 A
44 W
Maximum power
157 W
144 W
165 W
Programming accuracy at 25 °C 5 °C
Voltage
Current
0.03% +
0.03% +
13 mV
3 mA
13 mV
3 mA
25 mV
15 mV
11 mA
1.5 mA
Readback accuracy (via GPIB or keyboard
display at 25 °C 5 °C)
Voltage
Current
0.02% +
0.02% +
8 mV
3 mA
8 mV
3 mA
15 mV
9 mV
1.2 mA
0.6 mA
Ripple and noise from 20 Hz to 20 MHz
Constant voltage
rms
5 mV
10 mV
4 mA
5 mV
10 mV
4 mA
9 mV
6 mV
peak-to-peak
rms
15 mV
1.2 mA
11.5 mV
1 mA
Constant current
Line regulation
Voltage
1 mV
1 mV
2 mV
1 mV
Current
0.3 mA
0.3 mA
0.1 mA
50 µA
Load regulation
Voltage
1 mV
1 mV
2 mV
1 mV
Current
0.2 mA
0.2 mA
0.1 mA
50 µA
Transient response time
Less than 1 ms for the output voltage to recover within 100 mV of its previous level following
any step change in load current up to 10 percent of the power module rated output current
Supplemental Characteristics
66103A-J09
66103A-J12
66104A-J09
66105A-J01
(Non-warranted characteristics determined
by design and useful in applying the product)
Special order
option
Special order
option
Special order
option
Special order
option
Average programming resolution
Voltage
Current
OVP
10.4 mV
2 mA
8 mV
16.5 mV
0.9 mA
350 mV
2 mV
2 mA
1.2 mA
230 mV
200 mV
150 mV
Output accuracy
800 mV
600 mV
950 mV
920 mV
06 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
AC input of system mainframe:
Supplemental characterꢀstꢀcs
for all model numbers
Voltage
100 VAC
29 A
120 VAC 200 VAC 220 VAC 230 VAC 240 VAC
25 A 16 A 16 A 15 A 15 A
Max.
DC floating voltage: Output terminals can be floated up to 240
VDC from chassis ground
current
Input power of system mainframe: 3200 VA (max.), 1800 W (max.),
1600 W (typ.)
Remote sensing: Up to half the rated output voltage can be
dropped across each load lead. Add 2 mV to the voltage load
regulation specification for each 1 V change in the negative
output lead caused by a load current change.
GPIB interface capabilities: SH1, AH1, TE6, LE4, SR1, RL1, PP0, DC1,
DT1, E1, and C0, and a command set compatible with IEEE-488.2
and SCPI
Command processing time: The average time for the output
voltage to change after getting an GPIB command is 20 ms.
Software driver: VXIplug&play
Output programming response time (with full resistive load):
The rise and fall time (10% to 90% and 90% to 10%) of the
output voltage is less than 20 ms. The output voltage change
settles within 0.1% of the final value in less than 120 ms.
Regulatory compliance: Listed to UL 1244; certified to CSA 22.2
No. 231; conforms to IEC 61010-1
Size: 66000A: 425.7 mm W x 192 mm H x 677.93 mm D
(16.76 in x 7.28 in x 26.69 in), including feet and rear connectors
Down programming: An active down programmer sinks
approximately 10% of the rated output current
Weight: Net, 66000A, 15 kg (33 lb); 66001A, 1.05 kg (2.3 lb);
66101-66106A, 2.8 kg (6 lb). Shipping, 66000A, 19 kg (42 lb);
66001A, 1.34 kg (2.95 lb); 66101–66106A, 4.1 kg (9 lb)
Calibration interval: One year
Warranty: One year
Keysight Models: 66000A
Top
677.9 mm
26.69"
104.9 mm
4.13"
Front
425.7 mm
16.76"
177.3 mm
6.98"
190 mm
7.5"
07 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
Orderꢀng ꢀnformatꢀon
66000A MPS mainframe
Accessories
1CM023A* Rack mount flange kit 177.0 mm H (4U) –
two flange brackets
The 66000A comes with full documentation on
CD-ROM. The CD-ROM includes user’s guide,
installation guide, programming guide, service manual,
quick start guide, and application notes.
1CP013A* Rack mount flange and handle kit 177.0 mm
H (4U) – two brackets and front handles
E3663AC Support rails for Keysight rack cabinets
Opt 0L1 Printed programming and installation guides.
Opt 0B3 Printed service manual
66001A MPS keyboard includes 2 m (6 ft) cables
66002A Rack kit for 66001A keyboard
Opt 831 Power cord, no plug, Americas
Opt 833 Power cord, no plug, Europe
Opt 834 Power cord, no plug, USA
Opt 841 Power cord, Americas, Japan, NEMA 6-20P,
20 A, 250 V plug
p/n 5060-3351 Field-installable relay kit
p/n 5060-3386 Standard connector assembly
p/n 5060-3387 Standard connector assembly with
installed relays (Option 760)
Opt 845 Power cord, Scandinavia,
IEC 309, 16 A, 220 V plug
Application notes
66000 Modular Power System Product Note,
5988-2800EN
Opt 846 Power cord, North America, NEMA L5-30P,
30 A, 120 V plug
Opt 847 Power cord, Europe, CEE 7/7, 16 A,
220 V plug
10 Practical Tips You Need to Know About Your Power
Products, 5965-8239E
Opt 848 Power cord, S. Africa, India, BS 546,
15 A, 240 V
10 Hints for Using Your Power Supply to Decrease Test
Time, 5968-6359E
Module options
Each module comes with full documentation
on CD-ROM
Keysight DC Power Supplies for Base Station Testing,
5988-2386EN
Opt 760 Adds isolation/polarity relays
Opt J17 External monitor
Opt 0L1 Printed installation sheet and user’s guide
Opt 0B3 Printed service manual
*Support rails required
08 | Keysꢀght | 66000A 1200 W DC Modular Power System, GPIB - Data Sheet
For more ꢀnformatꢀon on Keysꢀght
myKeysight
Technologꢀes’ products, applꢀcatꢀons or
servꢀces, please contact your local Keysꢀght
offꢀce. The complete lꢀst ꢀs avaꢀlable at:
www.keysꢀght.com/fꢀnd/contactus
www.keysight.com/find/mykeysight
A personalꢀzed vꢀew ꢀnto the ꢀnformatꢀon most relevant to you.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to fꢀve years of protectꢀon and no budgetary surprꢀses to ensure your
ꢀnstruments are operatꢀng to specꢀfꢀcatꢀon so you can rely on accurate
measurements.
Americas
Canada
Brazil
Mexꢀco
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
www.keysight.com/quality
Keysꢀght Technologꢀes, Inc.
DEKRA Certified ISO 9001:2008
Qualꢀty Management System
United States
Asꢀa Pacꢀic
Australia
Chꢀna
Hong Kong
India
Japan
Korea
Malaysia
Sꢀngapore
Taiwan
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysꢀght’s measurement expertꢀse and product
breadth, combꢀned wꢀth channel partner convenꢀence.
www.keysꢀght.com/fꢀnd/66000
Other AP Countrꢀes
Europe & Middle East
Austria
Belgꢀum
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
0800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Spain
Sweden
Switzerland
Opt. 2 (FR)
Opt. 3 (IT)
Unꢀted Kꢀngdom
0800 0260637
For other unlꢀsted countrꢀes:
www.keysꢀght.com/fꢀnd/contactus
(BP-07-10-14)
Thꢀs ꢀnformatꢀon ꢀs subject to change wꢀthout notꢀce.
© Keysꢀght Technologꢀes, 2012 - 2014
Publꢀshed ꢀn USA, August 2, 2014
5990-9310EN
www.keysꢀght.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明