APHBM2012QBDCGKC [KINGBRIGHT]
2.0*1.25*0.45mm SMD LED;
| 型号： | APHBM2012QBDCGKC |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 2.0*1.25*0.45mm SMD LED |
| 文件： | 总6页 (文件大小：315K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APHBM2012QBDCGKC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Blue
Green
SENSITIVE
DEVICES
Features
Descriptions
z 2.0mmx1.25mm SMT LED, 0.45mm max. thickness.
z Bi -color, low power consumption.
z Wide viewing angle.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z The Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1203008819
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
40
Typ.
80
2θ1/2
Blue (InGaN)
APHBM2012QBDCGKC
Notes:
Water Clear
120°
Green (AlGaInP)
20
50
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
Blue
Green
460
574
λpeak
Peak Wavelength
nm
nm
nm
pF
V
IF=20mA
Blue
Green
465
570
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
Blue
Green
25
20
Blue
Green
100
15
VF=0V;f=1MHz
IF=20mA
Blue
Green
3.3
2.1
4
2.5
VF [2]
IR
Forward Voltage
Blue
Green
50
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
120
30
Green
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
150
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1203008819
APHBM2012QBDCGKC
Blue
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1203008819
Green
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1203008819
APHBM2012QBDCGKC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1203008819
PACKING & LABEL SPECIFICATIONS
APHBM2012QBDCGKC
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAJ4541
APPROVED: WYNEC
REV NO: V.8B
DATE: AUG/22/2014
DRAWN: L.Q.Xie
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1203008819
相关型号：
APHCM2012CGCK
SINGLE COLOR LED, GREEN, 1.3mm, 2 X 1.25 MM, 0.50 MM HEIGHT, LEAD FREE, SMD, 2 PIN
KINGBRIGHT
APHCM2012PBC/A
SINGLE COLOR LED, BLUE, 1.3mm, 2 X 1.25 MM, 0.50 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明