AT2520ZG10ZS-350MA [KINGBRIGHT]
SINGLE COLOR LED, GREEN, 1.9mm, 2.50 X 2 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, CERAMIC, SMT, 2 PIN;型号: | AT2520ZG10ZS-350MA |
厂家: | KINGBRIGHT CORPORATION |
描述: | SINGLE COLOR LED, GREEN, 1.9mm, 2.50 X 2 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, CERAMIC, SMT, 2 PIN 光电 |
文件: | 总7页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.5X2.0mm SURFACE MOUNT LED LAMP
Part Number: AT2520ZG10ZS-350MA
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Application Note
Features
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z Dimension: 2.5mmx 2.0mm x 0.8mm.
z Low thermal resistance.
z Ceramic package with silicone resin.
z Small package with high efficiency.
z Surface mount technology.
z ESD protection.
All devices, equipment and machinery must be electrically
grounded.
Typical Applications
PDAs
z Package : 2000pcs / reel.
Room lighting
z Moisture sensitivity level : level 2a.
z Soldering methods: IR reflow soldering.
z RoHS compliant.
Architectural lighting
Decorative/pathway lighting
Front panel backlight
Exterior automotive lighting:
(brake lights, turn lights, backlighting)
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 1 OF 7
CHECKED: Allen Liu
ERP: 1212000003
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diame-
ter of the nozzle should be as large as possible.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 2 OF 7
CHECKED: Allen Liu
ERP: 1212000003
Selection Guide
Viewing
Angle [1]
luminous Intensity [2]
Iv(mcd)@ 350mA
Φv (lm) [2]
@ 350mA
Dice
Part No.
Min.
Typ.
Typ.
2 θ 1/2
120 °
AT2520ZG10ZS-350MA
Notes:
Green (AlGaInN)
8000
12000
50
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Parameter
DC Forward Current [1]
Symbol
IF
Value
Unit
350
mA
mA
W
Peak Forward Current [2]
Power dissipation
IFM
500
PD
1.3
Operating Temperature
Top
Tstg
VR
-40 To +100
°C
Storage Temperature
-40 To +120
°C
Reverse Voltage
5
120
75
V
Junction temperature[1]
TJ
°C
Thermal resistance [1] (Junction/ambient)
Thermal resistance [1] (Junction/solder point)
Rth j-a
Rth j-s
°C/W
°C/W
V
28
數位簽署者:yalin
Electrostatic Discharge Threshold (HBM)
Notes:
8000
DN:cn=yalin,o,ou=SPEC
專用,email=yalin@ yalin.
com,c=<無>
日期 2011.04.1507:37:28
+08'00'
yalin
1. Results from mounting on metal core PCB,mounted on pc board-metal core PCB is recommend.for lowest thermal resistance.
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA = 25°C
Parameter
Symbol
Value
Unit
Forward Voltage IF = 350mA [Min.]
Forward Voltage IF = 350mA [Typ.]
Forward Voltage IF = 350mA [Max.]
Allowable Reverse Current [Max.]
2.7
3.3
3.8
85
VF [2]
V
IR
mA
nm
nm
Wavelength at peak emission IF = 350mA
[Typ.]
520
530
λ peak
λ dom [1]
Dominant Wavelength IF = 350mA [Typ.]
35
nm
Δλ
Spectral bandwidth at 50% Φ REL MAX IF = 350mA [Typ.]
Temperature coefficient of λ peak
TC λ peak
0.16
nm/°C
IF = 350mA, - 10 ° C ≤ T ≤ 100 ° C [Typ.]
Temperature coefficient of λ dom
TC λ dom
0.14
-3.1
nm/°C
mV/°C
IF = 350mA, - 10 ° C ≤ T ≤ 100 ° C [Typ.]
Temperature coefficient of VF
TCV
IF = 350mA, - 10 ° C ≤ T≤ 100 ° C [Typ.]
Notes:
1.Wavelength : + / -1nm.
2. Forward Voltage : + / - 0.1V.
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 3 OF 7
CHECKED: Allen Liu
ERP: 1212000003
AT2520ZG10ZS-350MA
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 4 OF 7
CHECKED: Allen Liu
ERP: 1212000003
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 5 OF 7
CHECKED: Allen Liu
ERP: 1212000003
AT2520ZG10ZS-350MA
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 6 OF 7
CHECKED: Allen Liu
ERP: 1212000003
PACKING & LABEL SPECIFICATIONS
AT2520ZG10ZS-350MA
SPEC NO: DSAJ0365
APPROVED: WYNEC
REV NO: V.7
DATE: APR/12/2011
DRAWN: J.Yu
PAGE: 7 OF 7
CHECKED: Allen Liu
ERP: 1212000003
相关型号:
©2020 ICPDF网 联系我们和版权申明