KA-3535SELZ4S [KINGBRIGHT]
SINGLE COLOR LED, HYPER ORANGE, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN;
| 型号： | KA-3535SELZ4S |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | SINGLE COLOR LED, HYPER ORANGE, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN 光电 |
| 文件： | 总6页 (文件大小：348K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.5x3.5 mm SMD CHIP LED LAMP
Part Number: KA-3535SELZ4S
Hyper Orange
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
數位簽署者：yuanfang
DN：cn=yuanfang,o,
ou=SPEC專用,
Description
email=rd02_p40@ cn.
yuanfangkingbright.com,c=<無>
日期 2013.04.2307:57:55
+08'00'
The Hyper Orange device is made with TS AlGaInP light
emitting diode.
Features
z White SMD package, silicone resin.
z Low thermal resistance.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z Compatible with IR-reflow processes.
z ESD protection.
All devices, equipment and machinery must be electrically
grounded.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201007945
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201007945
Selection Guide
Iv (cd) [2]
@ 150mA
Φv (lm) [2]
@ 150mA
Viewing
Angle [1]
Dice
Lens Type
Part No.
Min.
2.7
Typ.
Min.
8.6
Typ.
11
2 θ 1/2
120 °
KA-3535SELZ4S
Notes:
Hyper Orange (AlGaInP)
Water Clear
3.6
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3.LEDs are binned according to their luminous flux.
4.Luminous intensity/ luminous Flux value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Power Dissipation
Symbol
PD
Value
510
Unit
mW
°C
Junction Temperature [1]
Operating Temperature
Storage Temperature
DC Forward Current [1]
Reverse Voltage
TJ
130
Top
Tstg
IF
-40 To +85
-40 To +85
150
°C
°C
mA
V
VR
5
Peak Forward Current [2]
IFM
270
mA
Thermal Resistance [1]
(Junction/ambient)
Rth j-a
Rth j-S
240
°C/W
Thermal Resistance [1]
(Junction/solder point)
100
°C/W
V
Electrostatic Discharge Threshold (HBM)
Notes:
8000
1.Results from mounting on PC board FR4(pad size ≥ 70mm2), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
λ peak
λ dom [1]
Δλ
Value
630
Unit
nm
nm
nm
Wavelength at peak emission IF=150mA
[Typ.]
Dominant Wavelength IF=150mA [Typ.]
618
Spectral Line Half-width IF=150mA [Typ.]
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
Forward Voltage IF=150mA [Max.]
Allowable Reverse Current [Max.]
Temperature coefficient of λ peak
20
2.4
2.9
3.4
85
VF [2]
V
IR
mA
TC λ peak
0.11
0.09
-3.6
nm/° C
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
Temperature coefficient of λ dom
TC λ dom
nm/° C
mV/° C
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
Temperature coefficient of VF
TCV
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201007945
Hyper Orange
KA-3535SELZ4S
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201007945
KA-3535SELZ4S
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201007945
PACKING & LABEL SPECIFICATIONS
KA-3535SELZ4S
SPEC NO: DSAM0798
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/29/2013
DRAWN: F.Cui
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201007945
相关型号：
KA-39-79
RF TNC Connector, 1 Contact(s), Female, Cable Mount, Crimp Terminal, Locking, Jack
WINCHESTER
©2020 ICPDF网 联系我们和版权申明