KM-27ID-03 [KINGBRIGHT]
T-3/4 SINGLE COLOR LED, HIGH EFFICIENCY RED, 1.78mm, SMT-2;
| 型号： | KM-27ID-03 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | T-3/4 SINGLE COLOR LED, HIGH EFFICIENCY RED, 1.78mm, SMT-2 功效 光电 |
| 文件： | 总4页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SUBMINIATURE SOLID STATE LAMP
KM-27ID-03
HIGH EFFICIENCY RED
Description
Features
The High Efficiency Red source color devices are
made with Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode.
●SUBMINIATURE PACKAGE.
●GULL WING.
●LONG LIFE - SOLID STATE RELIABILITY.
●LOW PACKAGE PROFILE.
●PACKAGE :1000PCS / REEL.
●RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD0283
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/20/2005
DRAWN: Y.W.WANG
PAGE: 1 OF 4
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
2 θ 1/2
40°
KM-27ID-03
HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED
7
30
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Device
Typ.
Max.
Units
Test Conditions
Peak Wavelength
High Efficiency Red
627
nm
nm
nm
pF
V
IF=20mA
Dominant Wavelength
Spectral Line Half-width
Capacitance
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
625
45
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.0
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
105
30
160
5
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0283
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/20/2005
DRAWN: Y.W.WANG
PAGE: 2 OF 4
CHECKED: Allen Liu
High Efficiency Red
KM-27ID-03
SPEC NO: DSAD0283
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/20/2005
DRAWN: Y.W.WANG
PAGE: 3 OF 4
KM-27ID-03
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD0283
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/20/2005
DRAWN: Y.W.WANG
PAGE: 4 OF 4
CHECKED: Allen Liu
相关型号：
KM-27ID-09
Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 1.78mm, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明