KPA-2107SECK [KINGBRIGHT]
2.1*0.7*1.0mm SMD LED kingbright 今台;
| 型号： | KPA-2107SECK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 2.1*0.7*1.0mm SMD LED kingbright 今台 |
| 文件： | 总5页 (文件大小：707K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.1x0.6mm RIGHT ANGLE SURFACE LED
LAMP
Part Number: KPA-2107SECK
Super Bright Orange
Features
Description
z 2.1x1.0x0.6mm right angle SMD LED, 0.6mm thickness.
z Low power consumption.
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.1(0.004") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications
代理商深圳市容感科技有限公司
程梦：0755-83539752
QQ：2093686917
SPEC NO: DSAO4638
REV NO: V.2A
CHECKED: Allen Liu
DATE: JUN/06/2016
DRAWN: L.T.Zhang
PAGE: 1 OF 5
APPROVED: Wynec
ERP: 1203014732
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
110
*80
Typ.
250
2θ1/2
KPA-2107SECK
Notes:
Super Bright Orange (AlGaInP)
Water Clear
140°
*180
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
610
601
29
Max.
Units
Test Conditions
IF=20mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Brige
Suht ge
m
nm
nm
pF
V
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceae to CIE127-207 sndards.
4.Excess driving current and/oing temrature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
195
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref
JEDEC/JESD625-A and JEDEC/J-STD-033.
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/06/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO4638
REV NO: V.2A
CHECKED: Allen Liu
PAGE: 2 OF 5
APPROVED: Wynec
ERP: 1203014732
Super Bright Orange
KPA-2107SECK
代理商深圳市容感科技有限公司
程梦：0755-83539752
QQ：2093686917
SPEC NO: DSAO4638
REV NO: V.2A
CHECKED: Allen Liu
DATE: JUN/06/2016
DRAWN: L.T.Zhang
PAGE: 3 OF 5
APPROVED: Wynec
ERP: 1203014732
KPA-2107SECK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/06/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO4638
APPROVED: Wynec
REV NO: V.2A
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203014732
PACKING & LABEL SPECIFICATIONS
KPA-2107SECK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/06/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO4638
REV NO: V.2A
CHECKED: Allen Liu
PAGE: 5 OF 5
APPROVED: Wynec
ERP: 1203014732
相关型号：
©2020 ICPDF网 联系我们和版权申明