KPDA56-105 [KINGBRIGHT]
7 SEG NUMERIC DISPLAY, HYPER RED, 14.22mm, SMT, 20 PIN;
| 型号： | KPDA56-105 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 7 SEG NUMERIC DISPLAY, HYPER RED, 14.22mm, SMT, 20 PIN 光电 |
| 文件： | 总4页 (文件大小：138K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SURFACE MOUNT DISPLAY
P/N: KPDA56-105
HYPER RED
Features
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
z0.56INCH DIGIT HEIGHT.
zLOW CURRENT OPERATION.
zEXCELLENT CHARACTER APPEARANCE.
zI.C. COMPATIBLE.
zMECHANICALLY RUGGED.
zGRAY FACE,WHITE SEGMENT.
zPACKAGE:200PCS/ REEL.
zRoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ± 0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAA9176
APPROVED: J. Lu
REV NO: V.6
DATE: NOV/21/2005
DRAWN: F.LI
PAGE: 1 OF 4
CHECKED: Joe Lee
Selection Guide
Part No.
Iv (ucd)
@ 10mA
Dice
Lens Type
Description
Min.
4700
Typ.
Common Anode, Rt.
Hand Decimal.
KPDA56-105
HYPER RED (InGaAlP) WHITE DIFFUSED
17700
Electrical / Optical Characteristics at TA=25°C
Symbol
λ peak
λ D
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Hyper Red
Typ.
650
635
28
Max.
Units
Test Conditions
nm
nm
nm
pF
V
I
I
I
F=20mA
F=20mA
F=20mA
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Hyper Red
∆ λ 1/2
C
35
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
1.95
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
mW
mA
Power dissipation
DC Forward Current
75
30
Peak Forward Current [1]
Reverse Voltage
185
5
mA
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA9176
APPROVED: J. Lu
REV NO: V.6
DATE: NOV/21/2005
DRAWN: F.LI
PAGE: 2 OF 4
CHECKED: Joe Lee
Hyper Red
KPDA56-105
SPEC NO: DSAA9176
APPROVED: J. Lu
REV NO: V.6
CHECKED: Joe Lee
DATE: NOV/21/2005
DRAWN: F.LI
PAGE: 3 OF 4
KPDA56-105
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA9176
APPROVED: J. Lu
REV NO: V.6
DATE: NOV/21/2005
DRAWN: F.LI
PAGE: 4 OF 4
CHECKED: Joe Lee
相关型号：
KPDA56-106
7 SEG NUMERIC DISPLAY, SUPER BRIGHT ORANGE, 14.22mm, ROHS COMPLIANT, SMT, 20 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明