L-138A8QMP/1GD/TG [KINGBRIGHT]
SINGLE COLOR LED, GREEN, 3.4mm, ROHS COMPLIANT PACKAGE-2;
| 型号： | L-138A8QMP/1GD/TG |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | SINGLE COLOR LED, GREEN, 3.4mm, ROHS COMPLIANT PACKAGE-2 光电 |
| 文件： | 总4页 (文件大小：129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.4mm RIGHT ANGLE LED INDICATOR
L-138A8QMP/1GD/TG
GREEN
Features
Description
●PRE-TRIMMED LEADS FOR PC MOUNTING.
●CAN BE ASSEMBLED WITH EACH OTHER.
●I.C.COMPATIBLE.
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
●BLACK CASE ENHANCES CONTRAST RATIO.
●WIDE VIEWING ANGLE.
●HIGH RELIABILITY LIFE MEASURED IN YEARS.
●HOUSING MATERIAL:PPA.
●PACKAGE:1000PCS / REEL.
●HIGH TEMPERATURE RESISTANT HOUSING.
●HIGH GLASS TRANSFER TEMPERATURE EPOXY.
●RoHS COMPLIANT
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB9860
APPROVED: J. Lu
REV NO: V.9
DATE: OCT/28/2005
DRAWN: Y.L.LI
PAGE: 1 OF 4
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10 mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
15
2θ1/2
60°
L-138A8QMP/1GD/TG
Note:
GREEN (GaP)
GREEN DIFFUSED
8
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
565
568
30
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Green
Green
Green
Green
Green
Green
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
∆λ1/2
C
15
VF
Forward Voltage
2.2
2.5
10
V
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Green
105
25
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
140
5
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB9860
APPROVED: J. Lu
REV NO: V.9
CHECKED: Allen Liu
DATE: OCT/28/2005
DRAWN: Y.L.LI
PAGE: 2 OF 4
Green
L-138A8QMP/1GD/TG
SPEC NO: DSAB9860
APPROVED: J. Lu
REV NO: V.9
DATE: OCT/28/2005
DRAWN: Y.L.LI
PAGE: 3 OF 4
CHECKED: Allen Liu
L-138A8QMP/1GD/TG
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB9860
APPROVED: J. Lu
REV NO: V.9
DATE: OCT/28/2005
DRAWN: Y.L.LI
PAGE: 4 OF 4
CHECKED: Allen Liu
相关型号：
L-138A8QMP/1ID
Single Color LED, High Efficiency Red, Diffused Red, 3.4mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-138A8QMP/1ID/TG
SINGLE COLOR LED, HIGH EFFICIENCY RED, 3.4mm, ROHS COMPLIANT, SMT, 2 PIN
KINGBRIGHT
L-1394GDT
Single Color LED, Super Bright Green, Diffused Green, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-1394IDT
Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明