L-1394YDT [KINGBRIGHT]
Single Color LED, Yellow, Diffused, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2;
| 型号： | L-1394YDT |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, Yellow, Diffused, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2 光电 |
| 文件： | 总3页 (文件大小：73K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2mm FLAT TOP LED LAMP
L-1394YDT
YELLOW
Description
Features
The Yellow source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide
Yellow Light Emitting Diode.
ꢀLOW POWER CONSUMPTION.
ꢀSUITABLE FOR AUDIO PANEL INDICATOR.
ꢀFIT 2mm HOLE IN PANELS.
ꢀLONG LIFE-SOLID STATE RELIABILITY.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAE8314
APPROVED: J. Lu
REV NO: V.2
DATE: MAR/20/2005
DRAWN: W.J.ZHU
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
1.8
Typ.
2θ1/2
120°
L-1394YDT
Note:
YELLOW (GaAsP/GaP)
YELLOW DIFFUSED
5
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
590
588
35
Max.
Units
Test Conditions
IF=20mA
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
nm
nm
nm
pF
V
IF=20mA
IF=20mA
∆λ1/2
C
20
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.1
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
105
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
140
5
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
Lead Solder Temperature [3]
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAE8314
APPROVED: J. Lu
REV NO: V.2
CHECKED: Allen Liu
DATE: MAR/20/2005
DRAWN: W.J.ZHU
PAGE: 2 OF 3
Yellow
L-1394YDT
Remarks:
If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAE8314
APPROVED: J. Lu
REV NO: V.2
DATE: MAR/20/2005
DRAWN: W.J.ZHU
PAGE: 3 OF 3
CHECKED: Allen Liu
©2020 ICPDF网 联系我们和版权申明