L-154A4SURKQBDCGKW [KINGBRIGHT]
Triple Color LED,;型号: | L-154A4SURKQBDCGKW |
厂家: | KINGBRIGHT CORPORATION |
描述: | Triple Color LED, |
文件: | 总8页 (文件大小:785K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T-1 3/4 (5mm) FULL COLOR LED LAMP
Part Number: L-154A4SURKQBDCGKW
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Hyper Red
Blue
Green
SENSITIVE
DEVICES
Features
Descriptions
z Uniform light output.
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Low power consumption.
z Long life-solid state reliability.
z RoHS compliant.
z The Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove whhandling the LEDs.
z All devices, uipnts d machineries must be
electrically groded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 1 OF 8
CHECKED: Allen Liu
ERP: 1101031375
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
300
*100
120
*120
80
Typ.
700
2θ1/2
Hyper Red (AlGaInP)
*200
300
L-154A4SURKQBDCGKW
Blue (InGaN)
White Diffused
60°
*300
150
Green (AlGaInP)
*80
*150
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units
Test Conditions
Hyper Red
Blue
Green
645
460
574
λpeak
Peak Wavelength
nm
m
nm
pF
V
IF=20mA
Hyper Red
Blue
Green
630
465
570
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
Hyper Red
Blue
Green
28
25
0
HypR
Blu
ree
35
100
15
VF=0V;f=1MHz
IF=20mA
Red
Blu
Green
1.95
3.3
2.1
2.5
4
2.5
VF [2]
IR
Forward Voltage
Hyper Red
Blue
Green
10
50
10
ReverCunt
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Blue
Green
75
Units
mW
mA
mA
V
Power dissipation
75
30
120
DC Forward Current
30
30
Peak Forward Current [1]
Electrostatic Discharge Threshold (HBM)
Reverse Voltage
185
3000
150
150
3000
250
5
V
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 2 OF 8
CHECKED: Allen Liu
ERP: 1101031375
L-154A4SURKQBDCGKW
Hyper Red
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
CHECKED: Allen Liu
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 3 OF 8
ERP: 1101031375
Blue
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 4 OF 8
CHECKED: Allen Liu
ERP: 1101031375
Green
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 5 OF 8
CHECKED: Allen Liu
ERP: 1101031375
PACKING & LABEL SPECIFICATIONS
L-154A4SURKQBDCGKW
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 6 OF 8
CHECKED: Allen Liu
ERP: 1101031375
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 7 OF 8
CHECKED: Allen Liu
ERP: 1101031375
SPEC NO: DSAK7195
APPROVED: Wynec
REV NO: V.4A
DATE: JUN/11/2016
DRAWN: W.Q.Zhong
PAGE: 8 OF 8
CHECKED: Allen Liu
ERP: 1101031375
相关型号:
L-154A4SURKQBDZGC
Triple Color LED, Hyr-gre-blu, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT PACKAGE-4
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明