KVR16LN11K2 [KINGSTON]

16GB (8GB 2Rx8 1G x 64-Bit x 2 pcs.) PC3L-12800 CL11 240-Pin DIMM Kit;


型号：	KVR16LN11K2
厂家：	Kingston
描述：	16GB (8GB 2Rx8 1G x 64-Bit x 2 pcs.) PC3L-12800 CL11 240-Pin DIMM Kit PC
文件：	总2页 (文件大小：83K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Memory Module Speciﬁcations

KVR16LN11K2/16

16GB (8GB 2Rx8 1G x 64-Bit x 2 pcs.)

PC3L-12800 CL11 240-Pin DIMM Kit

DESCRIPTION

SPECIFICATIONS

ValueRAM's KVR16LN11K2/16 is a kit of two 1G x 64-bit (8GB)

DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8,

low voltage, memory modules, based on sixteen 512M x 8-bit

FBGA components per module. Total kit capacity is 16GB. The

SPDs are programmed to JEDEC standard latency DDR3-1600

timing of 11-11-11 at 1.35V or 1.5V. Each 240-pin DIMM uses

gold contact fingers. The electrical and mechanical specifica-

tions are as follows:

CL(IDD)

11 cycles

Row Cycle Time (tRCmin)

48.125ns (min.)

260ns (min.)

Refresh to Active/Refresh

Command Time (tRFCmin)

Row Active Time (tRASmin)

Maximum Operating Power

(Per module)

35ns (min.)

(1.35V) = TBD W*

UL Rating

94 V - 0

Operating Temperature

Storage Temperature

0^oC to 85^oC

-55^oC to +100^oC

FEATURES

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~

1.575V) Power Supply

*Power will vary depending on the SDRAM.

• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with

starting address “000” only), 4 with tCCD = 4 which does not

allow seamless read or write [either on the fly using A12 or

MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ

pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C,

3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Important Information: The module defined in this data sheet is one of several configurations available under

this part number. While all configurations are compatible, the DRAM combination and/or the module height

may vary from what is described here.

Continued >>

Document No. VALUERAM1410-001.B00 03/26/15 Page 1

MODULE DIMENSIONS:

Document No. VALUERAM1410-001.B00 Page 2

相关型号：