J1/6ZCT26R [KOA]
Fixed Resistor, 0ohm, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT;型号: | J1/6ZCT26R |
厂家: | KOA SPEER ELECTRONICS, INC. |
描述: | Fixed Resistor, 0ohm, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT |
文件: | 总2页 (文件大小:218K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
,
Z J
zero ohm jumpers
EU
features
• Type Z are conformal coated
• Type J are molded
• Suitable for automatic machine insertion
• Size compatible with 1/8, 1/4 and 1/2 watt resistors
• Marking: Type Z are tan color, single black band identifier
Type J are black, no marking
• Products with lead-free terminations meet EU RoHS
and China RoHS requirements
dimensions and construction
Type Z
D
L
l
Dimensions inches (mm)
l1
Type
Z16
L (ref.)1 C (max.)
D
d (nom.)
Standard
Long
d
.067 +.008
-.004
.126±.008
(3.2 0.2)
.134
(3.4)
.018
.551 Min.2 .787 Min.3
(14.0 Min.) (20.0 Min.)
(1.7 +0.2
)
(0.45)
-0.1
.240±.02
.091±.012
(2.3 0.3)
Z25
Insulation Marking Resistive End
Lead
(6.1 0.5)
.280
(7.1)
.024
(0.6)
Coating
Film
Cap
Wire
.228
(5.8)
.087±.004
(2.2 0.1)
C
L
Z25Y
.134 +.004
Type J
D
l
-.008
.067±.008
(1.7 0.2)
.020
(0.5)
1.18±.118
––
J1/6Z
J1/4Z
––
––
(3.4 +0.1
)
(30.0 3.0)
-0.2
d
+0
.091
-.012
.256±.02
(6.5 0.5)
.024
(0.6)
(2.3 +0
)
-0.3
1
2
3
Lead length changes depending on taping and forming type.
Forming code S is applied for bulk type.
Long type is custom-made.
Molded Resin
Solder Plated
Copper Wire
ordering information
New Part #
Z16
C
T52
A
Type
Termination Material
Taping and Forming
Packaging
Z16
Z25
C: SnCu
T26, T52
A: Ammo
R: Reel
Z25Y
J1/4Z
J1/6Z
For further information on packaging,
please refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/18/12
114
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
,
Z J
zero ohm jumpers
applications and ratings
Minimum
Rated
Ambient
Temperature
Operating
Temperature
Range
Part
Designation
Maximum
Amperage
Dielectric
Withstanding
Voltage
Resistance
Z16
1.5A
2.5A
15A
8A
300V
500V
500V
—
20mΩ or less
20mΩ or less
10mΩ Max.
Z25
-55°C to +155°C
-55°C to +125°C
Z25Y
J1/6Z
J1/4Z
+70°C
10A
—
environmental applications
Derating Curve
15
Z25Y
12
J1/4Z
J1/6Z
9
6
3
Z25
Z16
0
-80
-40
-55
0
40
80
70
120
160
125 155
Ambient Temperature
(°C)
For resistors operated at an ambient temperature of 70°C or above, a
power rating shall be derated in accordance with the above derating curve.
Performance Characteristics
Parameter
Requirement
Test Method JIS C5201-1
Resistance
Measuring points are 10mm ± 1mm from the end cap
Less than 20mΩ
Terminal except 3mm shall be immersed in the solder, 350°C ± 5°C,
3.5 seconds ± 0.5 second
Resistance to Solder Heat
Solderability
90% coverage minimum
No mechanical damages
235°C ± 5°C, 5 seconds ± 0.5 second
(Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds
(Twist Test) 360°, 5 times
Terminal Strength
(Bending Test) 5N, 90°, 2 times (Z16: 2.5N)
Rapid Change of Temperature
Moisture Resistance
-55°C (30 minutes)/+85°C (30 minutes), 5 cycles
Less than 20mΩ
40°C ±2°C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
70°C ±2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Endurance @ 70°C
No visible damages to protective
coating and marking
Isopropyl alcohol with ultrasonic cleansing for 2 minutes
Power: 0.3W/cm2, f: 28kHz, Temperature: 35°C ± 5°C
Solvent Resistance
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/18/12
115
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
相关型号:
©2020 ICPDF网 联系我们和版权申明