S-1.5KE75CA [LEIDITECH]

1500W Transient Voltage Suppressor;
S-1.5KE75CA
型号: S-1.5KE75CA
厂家: Leiditech    Leiditech
描述:

1500W Transient Voltage Suppressor

文件: 总5页 (文件大小:683K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
S-1.5KE Series 1500W Transient Voltage Suppressor  
DESCRIPTION:  
The S-1.5KE series of high current uni/bi-directional  
transient suppressors are designed for A.C. line protection  
and high power DC bus clamping applications. These  
devices offer uni/bi-directional port protection from 6.8  
volts to 600 volts. They provide a clamping voltage lower  
than the avalanche voltage. Therefore, any voltage rise  
due to increased current conduction is contained to a  
minimum, providing the best possible protection level.  
They can also be connected in series and/or parallel to  
create very high capacity protection solutions.  
DO-201  
FEATURES:  
Symbol  
Low zener impedance.  
Excellent clamping capability.  
Repetition rate (duty cycle): 0.01%.  
JEDEC DO-27/DO-201 Molded Plastic.  
Color band denoted cathode except bidirectional.  
High temperature soldering: 260/10s at terminals.  
Glass passivated chip junction in DO-27/DO-201 package.  
1500W Peak Pulse power capability at 10×1000μs waveform.  
Fast response time: typically less than 1.0ps from 0V to VBR min.  
AEC-Q101 qualified.  
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)  
Parameter  
Symbol  
Value  
Unit  
Peak pulse power dissipation on 10/1000μs  
waveform  
PPP  
1500  
W
Peak pulse current of on 10/1000μs  
waveform  
IPP  
See next table  
6.5  
A
Steady state power dissipation at TL=75℃  
PM(AV)  
TSTG, TJ  
W
Operating junction and Storage temperature  
range  
-55 to +125  
Peak forward surge current, 8.3ms single  
half sine-wave  
IFSM  
200  
A
1/5  
Rev : 01.08.2021  
www.leiditech.com  
S-1.5KE Series 1500W Transient Voltage Suppressor  
ELECTRICAL CHARACTERISTICS (TA=25)  
Part Number  
Uni-Polar Bi-Polar  
VR  
IR@VR  
VBR@IT  
IT  
VC@IPP  
IPP  
V
μA  
150  
100  
50  
20  
10  
5
min(V) max(V) mA  
max(V)  
10.5  
11.3  
A
S-1.5KE6.8A S-1.5KE6.8CA  
S-1.5KE7.5A S-1.5KE7.5CA  
5.8  
6.4  
6.45  
7.13  
7.14  
7.88  
10  
10  
10  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
147.1  
132.8  
124.0  
112.0  
103.5  
96.2  
89.8  
82.5  
70.8  
66.7  
59.6  
54.2  
49.1  
45.2  
40.0  
36.3  
32.9  
30.1  
27.9  
25.3  
23.2  
21.4  
19.5  
17.7  
16.4  
14.6  
13.3  
12.0  
11.0  
10.0  
S-1.5KE8.2A S-1.5KE8.2CA 7.02  
S-1.5KE9.1A S-1.5KE9.1CA 7.78  
7.79  
8.61  
12.1  
13.4  
14.5  
15.6  
16.7  
18.2  
21.2  
22.5  
25.2  
27.7  
30.6  
33.2  
37.5  
41.4  
45.7  
49.9  
53.9  
59.3  
64.8  
70.1  
77.0  
85.0  
92.0  
103.0  
113.0  
125.0  
137.0  
152.0  
8.65  
9.55  
S-1.5KE10A S-1.5KE10CA  
S-1.5KE11A S-1.5KE11CA  
S-1.5KE12A S-1.5KE12CA  
S-1.5KE13A S-1.5KE13CA  
S-1.5KE15A S-1.5KE15CA  
S-1.5KE16A S-1.5KE16CA  
S-1.5KE18A S-1.5KE18CA  
S-1.5KE20A S-1.5KE20CA  
S-1.5KE22A S-1.5KE22CA  
S-1.5KE24A S-1.5KE24CA  
S-1.5KE27A S-1.5KE27CA  
S-1.5KE30A S-1.5KE30CA  
S-1.5KE33A S-1.5KE33CA  
S-1.5KE36A S-1.5KE36CA  
S-1.5KE39A S-1.5KE39CA  
S-1.5KE43A S-1.5KE43CA  
S-1.5KE47A S-1.5KE47CA  
S-1.5KE51A S-1.5KE51CA  
S-1.5KE56A S-1.5KE56CA  
S-1.5KE62A S-1.5KE62CA  
S-1.5KE68A S-1.5KE68CA  
S-1.5KE75A S-1.5KE75CA  
S-1.5KE82A S-1.5KE82CA  
S-1.5KE91A S-1.5KE91CA  
8.55  
9.4  
9.50  
10.50  
11.60  
12.60  
13.70  
15.80  
16.80  
18.90  
21.00  
23.10  
25.20  
28.40  
31.50  
34.70  
37.80  
41.00  
45.20  
49.40  
53.60  
58.80  
65.10  
71.40  
78.80  
86.10  
95.50  
105.0  
116.0  
10.50  
11.40  
12.40  
14.30  
15.20  
17.10  
19.00  
20.90  
22.80  
25.70  
28.50  
31.40  
34.20  
37.10  
40.90  
44.70  
48.50  
53.20  
58.90  
64.60  
71.30  
77.90  
86.50  
95.00  
105.0  
10.2  
11.1  
12.8  
13.6  
15.3  
17.1  
18.8  
20.5  
23.1  
25.6  
28.2  
30.8  
33.3  
36.8  
40.2  
43.6  
47.8  
53.0  
58.1  
64.1  
70.1  
77.8  
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
S-1.5KE100A S-1.5KE100CA 85.5  
S-1.5KE110A S-1.5KE110CA 94.0  
1
1
2/5  
Rev : 01.08.2021  
www.leiditech.com  
S-1.5KE Series 1500W Transient Voltage Suppressor  
ELECTRICAL CHARACTERISTICS (TA=25, continued)  
Part Number  
Uni-Polar Bi-Polar  
VR  
V
IR@VR  
VBR@IT  
IT  
VC@IPP  
IPP  
μA  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
min(V) max(V) mA  
max(V)  
165.0  
179.0  
207.0  
219.0  
234.0  
246.0  
274.0  
328.0  
344.0  
414.0  
482.0  
548.0  
602.0  
658.0  
698.0  
740.0  
828.0  
A
S-1.5KE120A S-1.5KE120CA 102.0  
S-1.5KE130A S-1.5KE130CA 111.0  
S-1.5KE150A S-1.5KE150CA 128.0  
S-1.5KE160A S-1.5KE160CA 136.0  
S-1.5KE170A S-1.5KE170CA 145.0  
S-1.5KE180A S-1.5KE180CA 154.0  
S-1.5KE200A S-1.5KE200CA 171.0  
S-1.5KE220A S-1.5KE220CA 185.0  
S-1.5KE250A S-1.5KE250CA 214.0  
S-1.5KE300A S-1.5KE300CA 256.0  
S-1.5KE350A S-1.5KE350CA 300.0  
S-1.5KE400A S-1.5KE400CA 342.0  
S-1.5KE440A S-1.5KE440CA 376.0  
S-1.5KE480A S-1.5KE480CA 408.0  
S-1.5KE510A S-1.5KE510CA 434.0  
S-1.5KE550A S-1.5KE550CA 460.0  
S-1.5KE600A S-1.5KE600CA 512.0  
Surge waveform: 10/1000μs  
114.0  
124.0  
143.0  
152.0  
162.0  
171.0  
190.0  
209.0  
237.0  
285.0  
332.0  
380.0  
418.0  
456.0  
485.0  
513.0  
570.0  
126.0  
137.0  
158.0  
168.0  
179.0  
189.0  
210.0  
231.0  
263.0  
315.0  
368.0  
420.0  
462.0  
504.0  
535.0  
567.0  
630.0  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.1  
8.4  
7.3  
6.9  
6.5  
6.1  
5.5  
4.6  
4.4  
3.7  
3.2  
2.8  
2.5  
2.3  
2.1  
2.0  
1.8  
VR Stand-off Voltage -- Maximum voltage that can be applied  
BRBreakdown Voltage  
V
VCClamping Voltage -- Peak voltage measured across the suppressor at a specified Ipp  
IRReverse Leakage Current  
3/5  
Rev : 01.08.2021  
www.leiditech.com  
S-1.5KE Series 1500W Transient Voltage Suppressor  
RATINGS AND V-I CHARACTERISTICS CURVES (TA=25ºC, unless otherwise noted)  
FIG.1:V- I curve characteristics  
(Uni-directional)  
FIG.2:V- I curve characteristics  
(Bi-directional)  
IPP  
IT  
IR  
V
V
VC  
VBR  
VBR VR  
VR  
VC  
IR  
IT  
VF  
VR VBR VC  
IPP  
IPP  
FIG.3: Pulse waveform  
FIG.4: Pulse derating curve  
IPPM(%IRSM)  
150  
PPP derating in percentage(%)  
100  
tr = rise time to peak value  
td = decay time to half value  
tr=10μs  
80  
60  
40  
Peak value  
100  
Half value  
50  
0
20  
0
td  
t(ms)  
2.0  
TA()  
75 100  
0
1.0  
3.0  
4.0  
0
25  
50  
125  
150  
175  
SOLDERING PARAMETERS  
Pb-Free assembly  
(see FIG.5)  
Reflow Condition  
FIG.5: Reflow condition  
-Temperature Min (Ts(min)  
)
+150  
tp  
Pre  
T
P
-Temperature Max(Ts(max)  
)
+200℃  
Critical Zone  
TL to TP  
Ramp-up  
Heat  
TL  
-Time (Min to Max) (ts)  
60-180 secs.  
tL  
TS(max)  
Average ramp up rate (Liquid us Temp  
(TL) to peak)  
3/sec. Max  
Ramp-down  
Preheat  
T
S(min)  
Ts(max) to TL - Ramp-up Rate  
3/sec. Max  
+217℃  
t
s
-Temperature(TL)(Liquid us)  
Reflow  
25  
time to peak temperatue  
(t 25 to peak)  
Time  
-Temperature(tL)  
60-150 secs.  
+260(+0/-5)℃  
Peak Temp (Tp)  
Time within 5of actual Peak Temp (tp) 30 secs. Max  
Ramp-down Rate  
6/sec. Max  
8 min. Max  
+260℃  
Time 25to Peak Temp (TP)  
Do not exceed  
4/5  
Rev : 01.08.2021  
www.leiditech.com  
S-1.5KE Series 1500W Transient Voltage Suppressor  
MARKING ORDERING INFORMATION  
S- 1.5KE  
(1)  
XX  
(2)  
C
(3)  
A
(4)  
(1)Series:1500 watts series  
(2)Reverse Stand-off Voltage  
(3)Bi-directional  
(4)5% VBR Voltage tolerance  
Cathode Band  
Logo  
1.5KExxCA  
Product Type  
PACKAGE MECHANICAL DATA  
Dimensions  
Inches Millimeters  
Ref.  
A
B
A
Max.  
-
Min.  
25.40  
8.60  
Max.  
-
Min.  
1.000  
0.339  
0.045  
0.193  
A
B
C
D
9.20  
1.45  
5.60  
0.362  
0.057  
0.221  
1.15  
4.90  
Part Number  
Case Type  
Quantity  
1000  
Packing Option  
Box  
S-1.5KEXXCA/A  
DO-27/DO-201  
Shanghai Leiditech Electronic Co.,Ltd  
Email: sale1@leiditech.com  
Tel : +86- 021 50828806  
Fax : +86- 021 50477059  
5/5  
Rev : 01.08.2021  
www.leiditech.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY