5.0SMDJ40CA-T7 [LITTELFUSE]
暂无描述;
| 型号： | 5.0SMDJ40CA-T7 |
| 厂家： | 
LITTELFUSE |
| 描述： | 暂无描述 |
| 文件： | 总6页 (文件大小：1040K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Pb e3
RoHS
5.0SMDJ Series
Description
Uni-directional
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Bi-directional
Features
• 5000W peak pulse power • Excellent clamping
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
capability
• Low incremental surge
resistance
• For surface mounted
applications to optimize
board space
• Typical IR less than 5μA
when VBR min>22V
• High temperature
to reflow soldering
Agency Approvals
• Low profile package
AGENCY
AGENCY FILE NUMBER
E230531
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
guaranteed: 260°C/40sec
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
5000
Unit
W
Peak Pulse Power Dissipation at
TL=25OC by 10/1000µs Waveform
(Fig.2)(Note 1), (Note 2)
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Built-in strain relief
• Glass passivated chip
junction
Power Dissipation on Infinite Heat
Sink atTL=50OC
PD
6.5
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
300
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only
VF
5.0
V
OperatingTemperature Range
TJ
-65 to 150
-65 to 175
°C
°C
StorageTemperature Range
TSTG
• Fast response time:
typically less than 1.0ps
from 0V to BV min
TypicalThermal Resistance Junction
to Lead
°C/W
RθJL
RθJA
15
75
TypicalThermal Resistance Junction
to Ambient
°C/W
Applications
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
TVS devices are ideal for the protection of I/O Interfaces,
CC bus and other vulnerable circuits used inTelecom,
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
V
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Computer, Industrial and Consumer electronic
applications.
Additional Infomarion
Functional Diagram
Bi-directional
Datasheet
Samples
Resources
Cathode
Anode
Uni-directional
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Electrical Characteristics (TA=25°C unless otherwise noted)
Reverse
Stand off
Voltage
VR
Maximum Maximum Maximum
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
Agency
Approval
Part
Number
(Uni)
Part
Number
(Bi)
Clamping
Voltage VC
@ I
Peak
Pulse
Current Ipp
(A)
Reverse
Leakage IR
@ VR
Marking
(V)pp
(µA)
(mA)
UNI
BI
(Volts)
MIN
MAX
5.0SMDJ12A 5.0SMDJ12CA
5.0SMDJ13A 5.0SMDJ13CA
5.0SMDJ14A 5.0SMDJ14CA
5.0SMDJ15A 5.0SMDJ15CA
5.0SMDJ16A 5.0SMDJ16CA
5.0SMDJ17A 5.0SMDJ17CA
5.0SMDJ18A 5.0SMDJ18CA
5PEP
5PEQ
5PER
5PES
5PET
5PEU
5PEV
5BEP
5BEQ
5BER
5BES
5BET
5BEU
5BEV
5BEW
5BEX
5BEZ
5BFE
5BFG
5BFK
5BFM
5BFP
5BFR
5BFT
5BFV
5BFX
5BFZ
5BGE
5BGG
5BGK
5BGM
5BGB
5BGR
5BGT
5BGV
5BGX
5BGZ
5BHE
5BHG
5BHK
5BHM
5BHB
5BHR
12.0
13.0
14.0
15.0
16.0
17. 0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
14.70
15.90
17.20
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
252.00
233.00
216.00
205.00
193.00
181.00
172.00
155.00
141.00
129.00
119.00
110.00
103.00
93.90
86.10
77.60
72.10
68.80
64.70
60.70
57.50
53.50
51.70
48.60
44.30
41.40
800
500
200
100
50
20
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
5.0SMDJ20A 5.0SMDJ20CA 5PEW
5.0SMDJ22A 5.0SMDJ22CA
5.0SMDJ24A 5.0SMDJ24CA
5.0SMDJ26A 5.0SMDJ26CA
5.0SMDJ28A 5.0SMDJ28CA
5.0SMDJ30A 5.0SMDJ30CA
5PEX
5PEZ
5PFE
5PFG
5PFK
5.0SMDJ33A 5.0SMDJ33CA 5PFM
5.0SMDJ36A 5.0SMDJ36CA
5.0SMDJ40A 5.0SMDJ40CA
5.0SMDJ43A 5.0SMDJ43CA
5.0SMDJ45A 5.0SMDJ45CA
5.0SMDJ48A 5.0SMDJ48CA
5.0SMDJ51A 5.0SMDJ51CA
5.0SMDJ54A 5.0SMDJ54CA
5.0SMDJ58A 5.0SMDJ58CA
5.0SMDJ60A 5.0SMDJ60CA
5PFP
5PFR
5PFT
5PFV
5PFX
5PFZ
5PGE
5PGG
5PGK
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
5.0SMDJ64A 5.0SMDJ64CA 5PGM
5.0SMDJ70A 5.0SMDJ70CA
5.0SMDJ75A 5.0SMDJ75CA
5.0SMDJ78A 5.0SMDJ78CA
5.0SMDJ85A 5.0SMDJ85CA
5.0SMDJ90A 5.0SMDJ90CA
5.0SMDJ100A 5.0SMDJ100CA 5PGZ
5.0SMDJ110A 5.0SMDJ110CA 5PHE
5.0SMDJ120A 5.0SMDJ120CA 5PHG
5.0SMDJ130A 5.0SMDJ130CA 5PHK
5.0SMDJ150A 5.0SMDJ150CA 5PHM
5.0SMDJ160A 5.0SMDJ160CA 5PHP
5.0SMDJ170A 5.0SMDJ170CA 5PHR
5PGP
5PGR
5PGT
5PGV
5PGX
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
39.70
36.50
34.30
30.90
28.30
26.00
24.00
20.60
19.30
18.20
For bidirectional type having VR of 20 volts and less, the IR limit is double.
For parts without A , the VBR is 10% and VC is 5% higher than with A parts
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
I-V Curve Characteristics
Uni-directional
Bi-directional
Ipp
IT
IR
Vc VBR
VR
V
Vc VBR
VR
IR
IT
V
VRVBR Vc
IR
IT
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across theTVS at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating
1000
Voltage Transients
T
initial =T
J
amb
Voltage Across TVS
100
5kW at 10x1000µs, 25°C
Current Through TVS
10
1
0.001
0.01
0.1
1
10
td-Pulse Width (ms)
Time
continues on next page.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - PulseWaveform
100
80
60
40
20
0
150
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100
125 150
175
1.0
2.0
t-Time (ms)
3.0
4.0
0
TJ - Initial Junction Temperature (ºC)
Figure 5 -Typical Junction Capacitance
Figure 6 -TypicalTransientThermal Impedance
100000
100
Uni-direcꢀonal V=0V
10000
10
1
Bi-direcꢀonalV=0V
1000
Uni/Bi-direcꢀonalV=VR
100
0.1
0.01
10
1
0.001
0.01
0.1
1
10
100
1000
10
100
1000
V
BR - Reverse Breakdown Voltage(V)
TP - Pulse Duration (s)
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 8 - Peak ForwardVoltage Drop vs Peak Forward
Current (TypicalValues)
450
400
350
300
250
200
150
100
50
100.0
10.0
1.0
0.1
0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
1
10
100
V -Peak Forward Voltage(V)
F
Number of Cycles at 60 Hz
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Soldering Parameters
Lead–free
Reflow Condition
assembly
tp
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
Critical Zone
T
to T
L
P
TL
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
tL
Ts(max)
60 – 180 secs
Average ramp up rate (LiquidusTemp (TA)
to peak
Ramp-down
Ts(min)
3°C/second max
ts
Preheat
TS(max) toTA - Ramp-up Rate
3°C/second max
217°C
-Temperature (TA) (Liquidus)
Reflow
25˚C
t 25˚C to Peak
Time (t)
-Time (min to max) (ts)
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
6°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Environmental Specifications
HighTemp. Storage
JESD22-A103
JESD22-A108
JESD22-A104
Physical Specifications
HTRB
Weight
Case
0.007 ounce, 0.21 grams
Temperature Cycling
JEDEC DO214AB. Molded plastic body
over glass passivated junction
MSL
JEDEC-J-STD-020, Level 1
JESD22-A101
Color band denotes positive end
(cathode) except Bidirectional.
Polarity
H3TRB
RSH
MatteTin-plated leads, Solderable per
JESD22-B102
Terminal
JESD22-A111
Dimensions
DO-214AB (SMC J-Bend)
Inches
Millimeters
Cathode Band
(for Uni-directional products only)
Dimensions
Min
Max
Min
2.900
6.600
5.590
2.060
0.760
-
Max
A
B
C
D
E
F
G
H
I
0.114
0.260
0.220
0.079
0.030
-
0.126
0.280
0.245
0.103
0.060
0.008
0.320
0.012
-
3.200
7. 110
6.220
2.620
1.520
0.203
8.130
0.305
-
C
A
D
B
H
0.305
0.006
0.129
0.094
-
7.750
0.152
3.300
2.400
-
F
E
G
J
K
L
J
-
-
K
L
0.165
-
4.200
-
0.094
2.400
I
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Part Numbering System
Part Marking System
5.0SMDJ XXX C A
Cathode Band
(for Uni-directional products only)
Littelfuse Logo
5%
BI-DIRECTIONAL
VR VOLTAGE
VBR VOLTAGETOLERANCE
Marking Code
XXX
YMXXX
SERIES
Trace Code Marking
Y:Year Code
M: Month Code
XXX: Lot Code
Packaging Options
Component
Package
Packaging
Option
Packaging
Part number
Quantity
3000
Specification
5.0SMDJxxxXX
5.0SMDJxxxXX-T7
DO-214AB
DO-214AB
Tape & Reel - 16mm tape/13” reel
Tape & Reel – 16mm tape/7” reel
EIA STD RS-481
EIA STD RS-481
500
Tape and Reel Specification
0.157
(4.0)
0.63
(16.0)
Cathode
0.315
(8.0)
0.059
(1.5)
Cover tape
DIA
Optional
7” 7.0 (187)
13” 13.0 (330)
Dimensions are in inches
(and millimeters).
0.80 (20.2)
Arbor Hole Dia.
Direction of Feed
0.65
(16.4)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明