5KP11-B [LITTELFUSE]

TVS DIODE;
5KP11-B
型号: 5KP11-B
厂家: LITTELFUSE    LITTELFUSE
描述:

TVS DIODE

电视
文件: 总6页 (文件大小:890K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
RoHS  
5KP Series  
Description  
Uni-directional  
The 5KP Series is designed specifically to protect sensitive  
electronic equipment from voltage transients induced by  
lightning and other transient voltage events.  
Features  
Bi-directional  
VBR @TJ= VBR@25°C × (1+αT • ESD protection of data  
lines in accordance with  
IEC 61000-4-2 (IEC801-2)  
x (TJ - 25))  
(αT:Temperature Coefficient)  
• EFT protection of data  
lines in accordance with  
IEC 61000-4-4 (IEC801-4)  
• Low incremental surge  
resistance  
• Glass passivated chip  
junction in P600 package  
Agency Approvals  
• 5000W peak pulse  
capability at 10/1000μs  
waveform, repetition rate  
(duty cycles):0.01%  
• Fast response time:  
typically less than 1.0ps  
from 0 Volts to BV min  
AGENCY  
AGENCY FILE NUMBER  
E128662/E230531  
Typical IR less than 2μA  
above 12V  
• High temperature  
soldering guaranteed:  
260°C/40 seconds /  
0.375, (9.5mm) lead  
length, 5 lbs., (2.3kg)  
tension  
• Plastic package has  
underwriters laboratory  
flammability classification  
94V-O  
Maximum Ratings andThermal Characteristics  
(TA=25°C unless otherwise noted)  
• Excellent clamping  
capability  
Typical failure mode is  
short from over-specified  
voltage or current  
• Whisker test is conducted  
based on JEDEC  
JESD201A per its table 4a  
and 4c  
• IEC-61000-4-2 ESD  
Parameter  
Symbol  
PPPM  
Value  
5000  
Unit  
W
Peak Pulse Power Dissipation by  
10/1000μsTest Waveform (Fig.2)  
(Note 1)  
Steady State Power Dissipation on  
Inifinite Heat Sink atTL=75ºC (Fig. 6)  
PD  
8.0  
W
A
• Matte tin lead–free plated  
• Halogen free and RoHS  
compliant  
Peak Forward Surge Current, 8.3ms  
Single Half Sine Wave Unidirectional  
Only (Note 2)  
Maximum Instantaneous Forward  
Voltage at 100A for Unidirectional  
Only (Note 3)  
IFSM  
400  
15kV(Air), 8kV (Contact)  
VF  
3.5/5.0  
V
Applications  
Operating Junction and Storage  
Temperature Range  
TJ, TSTG -55 to 150  
°C  
TVS devices are ideal for the protection of I/O interfaces,  
CC bus and other vulnerable circuits used in telecom,  
computer, industrial and consumer electronic applications.  
V
TypicalThermal Resistance Junction  
to Lead  
RuJL  
RuJA  
8.0  
40  
°C/W  
°C/W  
TypicalThermal Resistance Junction  
to Ambient  
Notes:  
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTA = 25°C per Fig. 3.  
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per  
minute maximum.  
3. VF<3.5V for devices of VBR<_ 200V and VF<5.0V for devices of VBR>_ 201V.  
Additional Information  
Functional Diagram  
Datasheet  
Resources  
Samples  
Bi-directional  
Cathode  
Anode  
Uni-directional  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
Electrical Characteristics (TA=25°C unless otherwise noted)  
Maximum  
Reverse  
Leakage  
IR @ VR  
Maximum Maximum  
Breakdown  
Reverse  
Test  
Current  
IT  
Agency  
Approval  
Part  
Number  
(Uni)  
Part  
Number  
(Bi)  
Clamping  
Voltage  
VC @ IPP  
(V)  
Peak  
Pulse  
Current IPP  
(A)  
Voltage VBR  
(Volts) @ IT  
Stand off  
Voltage VR  
(Volts)  
(mA)  
MIN  
MAX  
(µ A)  
5KP5.0A  
5KP6.0A  
5KP6.5A  
5KP7.0A  
5KP7.5A  
5KP8.0A  
5KP8.5A  
5KP9.0A  
5KP10A  
5KP11A  
5KP12A  
5KP13A  
5KP14A  
5KP15A  
5KP16A  
5KP17A  
5KP18A  
5KP20A  
5KP22A  
5KP24A  
5KP26A  
5KP28A  
5KP30A  
5KP33A  
5KP36A  
5KP40A  
5KP43A  
5KP45A  
5KP48A  
5KP51A  
5KP54A  
5KP58A  
5KP60A  
5KP64A  
5KP70A  
5KP75A  
5KP78A  
5KP85A  
5KP90A  
5KP100A  
5KP110A  
5KP120A  
5KP130A  
5KP150A  
5KP160A  
5KP170A  
5KP180A  
5KP190A  
5KP200A  
5KP210A  
5KP220A  
5KP250A  
5KP5.0CA  
5KP6.0CA  
5KP6.5CA  
5KP7.0CA  
5KP7.5CA  
5KP8.0CA  
5KP8.5CA  
5KP9.0CA  
5KP10CA  
5KP11CA  
5KP12CA  
5KP13CA  
5KP14CA  
5KP15CA  
5KP16CA  
5KP17CA  
5KP18CA  
5KP20CA  
5KP22CA  
5KP24CA  
5KP26CA  
5KP28CA  
5KP30CA  
5KP33CA  
5KP36CA  
5KP40CA  
5KP43CA  
5KP45CA  
5KP48CA  
5KP51CA  
5KP54CA  
5KP58CA  
5KP60CA  
5KP64CA  
5KP70CA  
5KP75CA  
5KP78CA  
5KP85CA  
5KP90CA  
5KP100CA  
5KP110CA  
5KP120CA  
5KP130CA  
5KP150CA  
5KP160CA  
5KP170CA  
5KP180CA  
5KP190CA  
5KP200CA  
5KP210CA  
5KP220CA  
5KP250CA  
5.0  
6.0  
6.5  
7. 0  
7. 5  
8.0  
8.5  
9.0  
10.0  
11.0  
12.0  
13.0  
14.0  
15.0  
16.0  
17. 0  
18.0  
20.0  
22.0  
24.0  
26.0  
28.0  
30.0  
33.0  
36.0  
40.0  
43.0  
45.0  
48.0  
51.0  
54.0  
58.0  
60.0  
64.0  
70.0  
75.0  
78.0  
85.0  
90.0  
100.0  
110.0  
120.0  
130.0  
150.0  
160.0  
170.0  
180.0  
190.0  
200.0  
210.0  
220.0  
250.0  
6.40  
6.67  
7.22  
7.78  
8.33  
8.89  
9.44  
10.00  
11.10  
7. 0 0  
7.37  
7.98  
8.60  
9.21  
9.83  
10.40  
11.10  
12.30  
13.50  
14.70  
15.90  
17.20  
50  
50  
50  
50  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
9.2  
10.3  
11.2  
12.0  
12.9  
13.6  
14.4  
15.4  
17. 0  
18.2  
19.9  
21.5  
23.2  
24.4  
26.0  
27.6  
29.2  
32.4  
35.5  
38.9  
42.1  
45.4  
48.4  
53.3  
58.1  
64.5  
69.4  
72.7  
77.4  
554.3  
495.1  
455.4  
425.0  
395.3  
375.0  
354.2  
331.2  
300.0  
280.2  
256.3  
237.2  
219.8  
209.0  
196.2  
184.8  
174.7  
157.4  
143.7  
131.1  
121.1  
112.3  
105.4  
95.7  
87.8  
79.1  
73.5  
70.2  
65.9  
61.9  
58.6  
54.5  
52.7  
49.5  
45.1  
42.1  
40.5  
37.2  
5000  
5000  
2000  
1000  
250  
150  
50  
20  
15  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
12.20  
13.30  
14.40  
15.60  
16.70  
17.80  
18.90  
20.00  
22.20  
24.00  
26.70  
28.90  
31.10  
33.30  
36.70  
40.00  
44.40  
47.80  
50.00  
53.30  
56.70  
60.00  
64.40  
66.70  
71.10  
18.50  
19.70  
20.90  
22.10  
24.50  
26.90  
29.50  
31.90  
34.40  
36.80  
40.60  
44.20  
49.10  
52.80  
55.30  
58.90  
62.70  
66.30  
71.20  
73.70  
78.60  
86.00  
92.10  
95.80  
104.00  
111.00  
123.00  
135.00  
147.00  
159.00  
185.00  
197.00  
209.00  
221.00  
233.00  
246.00  
258.00  
270.00  
306.00  
82.4  
87.1  
93.6  
96.8  
103.0  
113.0  
121.0  
126.0  
137.0  
146.0  
162.0  
177.0  
193.0  
209.0  
243.0  
259.0  
275.0  
292.0  
310.0  
329.2  
349.5  
371.1  
425.0  
77.80  
83.30  
86.70  
94.40  
100.00  
110.00  
122.00  
133.00  
144.00  
167.00  
178.00  
189.00  
200.00  
211.00  
222.00  
233.00  
244.00  
277.00  
34.9  
31.5  
28.8  
26.4  
24.4  
21.0  
19.7  
18.5  
17. 5  
16.5  
15.5  
14.6  
13.7  
12.0  
2
2
For bidirectional type having VR of 10 volts and less, the IR limit is double.  
For parts without A , the VBR is + 10% and VC is 5% higher than with A parts  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
I-V Curve Characteristics  
Bi-directional  
Uni-directional  
Ipp  
IT  
IR  
Vc VBR  
VR  
V
Vc VBR  
VR  
IR  
IT  
V
VRVBR Vc  
IR  
IT  
VF  
Ipp  
Ipp  
PPPM Peak Pulse Power Dissipation -- Max power dissipation  
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation  
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)  
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)  
IR Reverse Leakage Current -- Current measured at VR  
VF Forward Voltage Drop for Uni-directional  
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)  
Figure 1 -TVSTransients ClampingWaveform  
Figure 2 - Peak Pulse Power Rating Curve  
Voltage Transients  
100  
Non-repetitive pulse  
waveform shown in  
Fig.3 TA=25ºC  
Voltage Across TVS  
10  
1
Current Through TVS  
0.1  
0.1µs  
1.0µs  
10µs  
100µs  
1.0ms 10ms  
td - Pulse Width (sec.)  
Time  
continues on next page.  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)  
Figure 3 - Pulse Derating Curve  
Figure 4 - PulseWaveform  
150  
100  
80  
60  
40  
20  
0
t =10µsec  
r
T
=25°C  
J
Pulse Width(td) is defined  
as the point where the peak  
current decays to 50% of I  
PPM  
Peak Value  
I
100  
PPM  
Half Value  
I
PPM  
2
I
PPM  
( )  
50  
0
10/1000µsec. Waveform  
as defined by R.E.A  
t
d
0
25  
50  
75  
100 125 150  
175  
1.0  
2.0  
t-Time (ms)  
3.0  
4.0  
TA-Ambient temperature (ºC)  
0
Figure 5 -Typical Junction Capacitance  
Figure 6 - Steady State Power Derating Curve  
100000  
9
8
7
6
5
4
Bi-directional V=0V  
10000  
Uni-directional V=0V  
Uni-directional @ VR  
1000  
100  
10  
Bi-directional @ VR  
3
L = 0.375” (9.5mm)  
Lead Lengths  
2
Tj=25C  
f=1.0MHz  
Vsig=50mVp-p  
1
0
1
1.0  
10.0  
100.0  
1000.0  
0
25  
50  
75  
100 125 150 175 200  
VBR - Reverse Breakdown Voltage (V)  
TL - Lead Temperature(ºC)  
Figure 7 - Maximum Non-Repetitive Peak Forward  
Surge Current  
450  
400  
350  
300  
250  
200  
150  
100  
50  
0
1
10  
100  
Number of Cycles at 60 Hz  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
Soldering Parameters  
tp  
Reflow Condition  
Lead–free assembly  
TP  
Ramp-up  
Critical Zone  
to T  
-Temperature Min (Ts(min)  
)
150°C  
T
L
P
TL  
tL  
Pre Heat -Temperature Max (Ts(max)  
)
200°C  
Ts(max)  
-Time (min to max) (ts)  
60 – 180 secs  
Ramp-down  
Ts(min)  
Average ramp up rate (LiquidusTemp  
(TL) to peak  
3°C/second max  
ts  
Preheat  
TS(max) toTL - Ramp-up Rate  
3°C/second max  
25˚C  
t 25˚C to Peak  
-Temperature (TL) (Liquidus) 217°C  
Reflow  
Time (t)  
-Time (min to max) (ts)  
60 – 150 seconds  
PeakTemperature (TP)  
260+0/-5 °C  
Time within 5°C of actual peak  
Temperature (tp)  
Flow/Wave Soldering (Solder Dipping)  
20 – 40 seconds  
PeakTemperature :  
DippingTime :  
Soldering :  
265OC  
Ramp-down Rate  
6°C/second max  
8 minutes Max.  
280°C  
10 seconds  
1 time  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Environmental Specifications  
Physical Specifications  
Weight  
Case  
0.07oz., 2.1g  
HighTemp. Storage  
HTRB  
JESD22-A103  
P600 molded plastic body over  
passivated junction.  
JESD22-A108  
JESD22-A104  
JESD22-A101  
JESD22-B106  
Color band denotes the cathode except  
Bipolar.  
Temperature Cycling  
H3TRB  
Polarity  
MatteTin axial leads, solderable per  
JESD22-B102.  
Terminal  
RSH  
Dimensions  
Inches  
Millimeters  
Min Max  
Dimensions  
Cathode Band  
Min  
Max  
(for Uni-directional products only)  
D
A
B
C
D
1.000  
0.340  
0.048  
0.340  
-
25.40  
8.60  
1.22  
-
C
0.360  
0.052  
0.360  
9.10  
1.32  
9.10  
A
A
B
8.60  
P600  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  
TransientVoltage Suppression Diodes  
Axial Leaded – 5000W > 5KP series  
Part Numbering System  
Part Marking System  
5KPxxxXXX  
Cathode Band  
(for uni-directional  
products only)  
OPTION CODE:  
BLANK ReelTape  
-B Bulk Packaging  
YYWW  
Littelfuse Logo  
Trace Code Marking  
YY:Year Code  
TYPE CODE:  
A
Uni-Directional (5% VBR VoltageTolerance)  
WW: Week Code  
CA Bi-Directional (5%  
V
BR VoltageTolerance)  
5KPXXX  
Product Type  
VR VOLTAGE  
SERIES CODE  
Packing Options  
Part Number  
Component Package  
Quantity  
Packaging Option  
Packaging Specification  
EIA STD RS-296  
5KPxxxXX  
P600  
800  
Tape & Reel  
BULK  
5KPxxxXX-B  
P600  
100  
Littelfuse Spec.  
Tape and Reel Specification  
Off Center  
either side  
0.028(0.7)  
2.56  
(65.0)  
2.063+0.079/-0.039  
(53.0+2.0/-1.0)  
0.236  
(6.0)  
0.047  
(1.2)  
0.394+/-0.020  
(10.0+/-0.5)  
Dimensions are in  
inches/mm  
13.0  
(330.2)  
3.0  
(76.2)  
0.68  
(17. 27)  
2.75  
(69.85)  
Direction of Feed  
Recess Depth Max. 0.75 (19.05)  
© 2014 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 01/24/14  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY