600R150-RA [LITTELFUSE]
POLYFUSE㈢ Resettable PTCs; POLYFUSE㈢恢复PTC型号: | 600R150-RA |
厂家: | LITTELFUSE |
描述: | POLYFUSE㈢ Resettable PTCs |
文件: | 总5页 (文件大小:359K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POLYFUSE® Resettable PTCs
Radial Leaded
600R Series
Description
• The 600R series is designed to protect against power
fault events typically found in telecom applications.
This series is designed to be used in applications that
need to meet the requirements of GR-1089-CORE and
UL60950/EN60950/IEC60950. These resettable devices
also help to meet the requirements of ITU K.20, K.21 and
K.44.
Features
• RoHS compliant and
lead-free
• Fast time-to-trip
• Binned and sorted narrow
resistance ranges available
• 0.15 – 0.16A Hold current
range, 60VDC operating
voltage
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E183209
• 600VAC interrupt rating
R50082521
Applications
Secondary overcurrent
protection for:
• Central Office
Equipment (CO)
• Customer Premises
Equipment (CE)
• Alarm Systems
• Set Top Boxes (STB)
• Voice over IP (VOIP)
• Subscriber Line Interface
Circuit (SLIC)
Electrical Characteristics
Maximum Time
Agency
Resistance
R typ
P
To Trip
Approvals
madx.
(W)
I hold
(A)
I trip
(A)
V max
(Vdc)
I max
(A)
Part Number
R min
(Ω)
R 1max
(Ω)
Current
Time
(Sec.)
(A)
5.0
5.0
4.5
7.5
9.5
9.0
(Ω)
12
10
12
10
7
600R150
0.15
0.15
0.15
0.16
0.16
0.16
0.30
0.30
0.30
0.32
0.32
0.32
600
600
600
600
600
600
3
3
3
3
3
3
1.00
1.00
1.00
1.00
1.00
1.00
8.0
6
7
9
4
4
4
22
20
22
18
16
17
X
X
X
X
X
X
X
X
X
X
X
X
600R150-RA
600R150-RB
600R160
7.5
-
18
-
600R160-RA
600R160-R1
-
8
Temperature Rerating
Ambient Operation Temperature
-40°C
-20°C
0°C
23°C
Hold Current (A)
0.15
40°C
60°C
85°C
Part Number
600R150
0.26
0.27
0.23
0.24
0.19
0.20
0.124
0.13
0.062
0.07
0.03
0.05
600R160
0.16
600R Series
ꢀ
www.littelfuse.com
©2006 Littelfuse
Specifications are subject to change without notice.
Electronics Designers Guide
POLYFUSE® Resettable PTCs
Radial Leaded
Average Time Current Curves
Temperature Rerating Curve
170%
150%
130%
100000
10000
1000
100
110%
90%
70%
50%
30%
10%
-40 -30 -20 -10
0
10
20 30
Temperature (°C)
40 50 60 70 80
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Specifications are subject to change without notice.
Note: 1.00 means the number one with two decimal places.
AKL V3.9 06.05.15
The average time current curves and temperature rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
Agency Specification Selection Guide For Telecom and Networking Applications
Part Number
Lightning
Power Cross
600R150
600R160
TIA-968-A – 1.5kV 10/160μs
800V 10/560μs
UL60950, 3rd Ed – 600Vac, 40A
Telcordia GR – 1089 – 600Vac, 60A
Telcordia GR –1089–1.0kV 10/1000μs
2.5kV 2/10μs
Devices should be independently evaluated and tested for use in any specific application
600R Series
ꢁ
www.littelfuse.com
©2006 Littelfuse
Specifications are subject to change without notice.
Electronics Designers Guide
POLYFUSE® Resettable PTCs
Radial Leaded
Protection Application Guide
Device Selection
Region/Specification
Application
*Access network equipment
Remote terminal
Repeaters
North America
Telcordia GR-1089
600R150
600R160
WAN equipment
Cross -connect
Customer and IT equipment
Analog modems
North America
TIA-968-A, UL60950
ADSL, XDSL modems
Phone sets, PBX systems
Internet appliances
600R150
600R160
POS terminals
Central Office
POTS/ISDN linecards
T1/E1/J1 linecards
ADSL/VDSL splitters
CSU/DSU
North America
Telcordia GR-1089
600R150
600R160
North America
Telcordia GR-1089
*Intrabuilding communication systems
LAN, VOIP cards
600R150
600R160
South America/Asia/Europe
ITU K.20 and K.21
Local loop handsets
*Resistance binned parts are recommended
Soldering Parameters - Wave Soldering
Condition
Wave Soldering
<
Peak Temp/ Duration Time
260°C 5 Sec
Soldering
Cooling
260
220
>
220°C
2 Sec ~ 20 Sec
Preheat 140°C~ 180°C
Storage Condition
180 Sec ~ 210 Sec
Preheating
<
0°C~35°C, 70%RH
190
160
• Recommended soldering methods: heat element oven or
N2 environment for lead-free
• Devices are designed to be wave soldered to the bottom
side of the board.
0
2 to 5
20-30
180 to 210
Time(s)
• Devices can be cleaned using standard industry methods
and solvents.
• This profile can be used for lead-free device
Note: If soldering temperatures exceed the recommended
profile, devices may not meet the performance
requirements.
600R Series
ꢂ
www.littelfuse.com
©2006 Littelfuse
Specifications are subject to change without notice.
Electronics Designers Guide
POLYFUSE® Resettable PTCs
Radial Leaded
Soldering Parameters - Solder Reflow
Condition
Reflow
>
Peak Temp/ Duration Time
260°C 5 Sec
Soldering
Cooling
260
220
>
220°C
30 Sec ~ 60 Sec
60 Sec ~ 90 Sec
Preheat 160°C~ 190°C
Storage Condition
Preheating
<
0°C~35°C, 70%RH
190
160
• Recommended reflow methods: IR, vapor phase oven, hot
air oven, N2 environment for lead-free.
• Devices are not designed to be wave soldered to the
bottom side of the board.
0
30 to 60
120
60 to 90
Time(s)
• Devices can be cleaned using standard industry methods
and solvents.
Note: If reflow temperatures exceed the recommended
profile, devices may not meet the performance
requirements.
Physical Specifications
Environmental Specifications
Operating/Storage
Lead Material
Tin-plated copper
-40°C to +85°C
Temperature
Soldering
Characteristics
Solderability per MIL-STD-202,
Method 208E
Maximum Device Surface
Temperature in Tripped State
125°C
Cured, flame retardant epoxy polymer
meets UL94V-0 requirements.
Insulating Material
Device Labeling
Passive Aging
85°C/85°C, 1000 hours
+85°C, 85%R.H. 1000 hours
Marked with LF, voltage, current rating,
and date code.
Humidity Aging
MIL-STD-202F Method 107G
+125°C to -55°C 10 times
Thermal Shock
Solvent Resistance
MIL-STD-202, Method 215F
600R Series
ꢃ
www.littelfuse.com
©2006 Littelfuse
Specifications are subject to change without notice.
Electronics Designers Guide
POLYFUSE® Resettable PTCs
Radial Leaded
Dimensions
A
C
Marking
B
D
F
E
Figure ꢀ
A
B
C
D
E
Physical Characteristics
Lead (dia)
Typ. Inches mm
Part Number
Inches mm Inches mm Inches mm Inches mm Inches mm
Material Figure
Max. Max. Max. Max. Max. Max.
Min.
0.19
0.19
0.19
0.19
0.19
0.19
Min.
4.7
4.7
4.7
4.7
4.7
4.7
Typ.
0.20
0.20
0.20
0.20
0.20
0.20
600R150
0.53
0.53
0.53
0.63
0.63
0.63
13.5
13.5
13.5
16
0.50
0.50
0.50
0.50
0.50
0.50
12.6
12.6
12.6
12.6
12.6
12.6
0.24
0.24
0.24
0.24
0.24
0.24
6
6
6
6
6
6
5.1
5.1
5.1
5.1
5.1
5.1
0.026
0.026
0.026
0.026
0.026
0.026
0.65
0.65
0.65
0.65
0.65
0.65
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
1
1
1
1
1
1
600R150-RA
600R150-RB
600R160
600R160-RA
600R160-R1
16
16
Part Marking System
Littelfuse
Trademark
Voltage Rating
Current Rating
Date Code
600
150
XXXX
(Contact Littelfuse
for additional
information)
Part Numbering System
600 R 160 - RA F
PACKAGING STYLE
BLANK: Bulk
R: Tape & Ammo
QUANTITY CODE: F=200 U=500
SERIES
Rx: Resistance Range (x = A-Z or 1-9) [not applicable for all parts]
T: PRE-TRIPPED DEVICE (OPTIONAL)
I
HOLD CURRENT CODE (SEE TABLE BELOW)
R: RADIAL
PEAK VOLTAGE RATING
Packaging
I hold
(A)
I hold
Code
Packaging
Option
Quantity &
Packaging Codes
Quantity
Bulk
200
600
200
500
F
ZR
F
0.15
0.16
150
160
Tape and Ammo
Bulk
Tape and Ammo
UR
600R Series
ꢄ
www.littelfuse.com
©2006 Littelfuse
Specifications are subject to change without notice.
Electronics Designers Guide
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明