AK6-380C-Y-12 [LITTELFUSE]
Trans Voltage Suppressor Diode,;
| 型号： | AK6-380C-Y-12 |
| 厂家： | 
LITTELFUSE |
| 描述： | Trans Voltage Suppressor Diode, |
| 文件： | 总4页 (文件大小：699K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TVS Diodes
Axial Leaded – 6kA > AK6-Y series
RoHS
Pb
e4
AK6-Y Series
Description
The AK6-Y series of high powerTVS diode is specially
designed for meeting severe surge test environment of
both AC and DC line protection applications. It features a
very fast response and ultra low clamping characteristics
as compared to MOVs (Metal Oxide Varistors). It
accomplishes this by virtue of the Littelfuse FoldbackTM
technology,which provides a clamping voltage lower
than the avalanche voltage (but above the rated working
voltage); therefore, any voltage rise due to increased
current conduction is maintained at a minimum magnitude,
providing the best possible protection level. These AK
components can be connected in series and / or parallel to
create a very high surge current protection solution.
Agency Recognitions
AGENCY
AGENCY FILE NUMBER
E128662
Features
• Recognized to UL 497B as • IEC-61000-4-2 ESD
an Isolated Loop Circuit
Protector
• Both reflow and wave
soldering capable
15kV(Air), 8kV (Contact)
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Halogen-free and RoHS
compliant
• Glass passivated junction
• Pb-free E4 means 2nd level
interconnect is Pb-free
and the terminal finish
material is silver
Parameter
Symbol
TSTG
Value
Unit
°C
• Very low clamping voltage
Operating StorageTemperature
Range
-55 to 150
• Ultra compact: less
than one-tenth the size
of traditional discrete
solutions
• Sharp breakdown voltage
• Low slope resistance
• Bi-directional
Operating JunctionTemperature
Range
TJ
-55 to 125
6
ºC
Current Rating1
IPP
kA
Note:
1. Rated IPP measured with 8/20μs pulse.
• Foldback technology for
superior clamping factor
Functional Diagram
• Symmetric in leads width
for easier soldering during
assembly.
Bi-direcctional
Electrical Characteristics (TA=25°C unless otherwise noted)
Max. Clamping
Max.
Max.
Capacitance
0 Bias
Max.
Test
Standoff
Voltage
(VSO)
Typical
IR @
Agency
Approval
Reverse Breakdown
Voltage (VBR) @ IT
Voltage
Temp
Reverse
Leakage
(I ) @VSO
R µA
Current
Part
Numbers
Part
Marking
VCL @ Ipp Peak Pulse Coefficient
Current (IPP) (Note 1)
85OC
(µA)
IT
OF VBR
10kHz
Volts
Min Volts Max Volts (mA) VCL Volts IPP Amps
(%/OC)
(nF)
AK6-030C-Y
AK6-058C-Y
AK6-066C-Y
AK6-076C-Y
AK6-170C-Y
AK6-190C-Y
AK6-240C-Y
AK6-380C-Y
AK6-430C-Y
6-030C
6-058C
6-066C
6-076C
6-170C
6-190C
6-240C
6-380C
6-430C
30
58
66
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
32
64
72
37
70
80
10
10
10
10
10
10
10
10
10
90
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
11.0
8.0
6.0
6.5
2.8
2.5
2.0
1.4
X
X
X
X
X
X
X
X
X
110
120
140
260
290
340
520
625
76
85
95
170
190
240
380
430
180
200
250
401
440
220
245
285
443
490
1.0
Note: Using 8/20μs wave shape as defined in IEC 61000-4-5.
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/18/19
TVS Diodes
Axial Leaded – 6kA > AK6-Y series
Figure 2 - PulseWaveform
Figure 1 - Peak Power Derating
100
80
60
40
20
0
tr = rise time to peak value
td = decay time to half value
Peak
Value
100
50
0
tr x td =8/20µs
Half Value
0
25
50
75
100
125
tr
td
0
t – Time (µs)
TJ - Initial Junction Temperature (ºC)
Figure 3 -Typical Peak Pulse Power Rating Curve
Figure 4 -TypicalVBR Vs JunctionTemperature
10000
12
10
AK6-430C-Y
8
8/20µs
1000
6
4
10/350µs
2
0
AK6-076C-Y
100
10/1000µs
-2
-4
-6
-8
10
1
-50 -25
0
25
50 75 100 125
0.00001
0.0001
0.001
Junction Temperature(Tj )
t-Pulse Width (sec.)
Figure 5 -Surge Response (8/20 Surge current waveform)
Voltage
Current
Time (µs)
Note:The power dissipation causes a change in avalanche voltage during the surge and the
avalanche voltage eventually returns to the original value when the transient has passed.
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/18/19
TVS Diodes
Axial Leaded – 6kA > AK6-Y series
Soldering Parameters
Reflow Condition
Lead–free assembly
tp
-Temperature Min (Ts(min)
)
150°C
TP
Ramp-up
Critical Zone
to T
Pre Heat -Temperature Max (Ts(max)
)
200°C
T
L
P
TL
tL
-Time (min to max) (ts)
60 – 120 secs
Ts(max)
Average ramp up rate (LiquidusTemp (TL)
to peak
3°C/second max
Ramp-down
Ts(min)
ts
TS(max) toTA - Ramp-up Rate
3°C/second max
Preheat
-Temperature (TL) (Liquidus)
Reflow
217°C
25˚C
-Time (min to max) (TS)
60 – 150 seconds
t 25˚C to Peak
Time (t)
PeakTemperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
30 seconds
Ramp-down Rate
6°C/second max
8 minutes Max.
260°C
Time 25°C to peakTemperature (TP)
Do not exceed
Flow Soldering (Solder Dipping)
Reflow Condition
Lead–free assembly
140°C
t
p
-Temperature Min (Ts(min)
)
T
p
ꢀꢁꢂꢃꢄꢅꢃ
Pre Heat -Temperature Max (Ts(max)
)
160°C
-Time to Pre-HeatTemp
60 – 150 secs
Average ramp up rate to Pre-HeatTemp
PeakTemperature (TP)
5°C/second max
260+0/-5 °C
T
S
ꢀꢁꢂꢃꢆꢇꢈꢉꢊ
ꢋꢌꢍꢄꢎꢍꢁꢏ
Average ramp up rate (pre-heat toTP)
5°C/second max
Time within actual peakTemperature Max
Ramp-down Rate
6 seconds
5°C/second max
time to peak temperature
time (t)
Physical Specifications
Weight
Case
Contact manufacturer
UL Recognized compound meeting
flammability rating V-0
Silver plated leads, solderable per
MIL-STD-750 Method 2026
Terminal
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/18/19
TVS Diodes
Axial Leaded – 6kA > AK6-Y series
Dimensions
A
G
Dimensions
Inches
Millimeters
F
A
0.950 +/- 0.040
0.095 +/- 0.024
0.236 +/- 0.040
0.570 max.
24.15 +/- 1.00
2.4 +/- 0.60
6.00 +/- 1.00
14.48 max.
L2
L1
B
C
D
D
E
F
0.050 +/- 0.002
0.500 max.
1.270 +/- 0.05
12.70 max.
C
E
B
G - 030C-Y
0.161 +/- 0.040
4.10 +/- 1.00
C
G - 058C-Y/066C-Y
076C-Y
0.189 +/- 0.040
4.8 +/- 1.00
G - 170C-Y/190C-Y
G - 240C-Y
G - 380C-Y/430C-Y
L1/L2
0.320 +/- 0.040
0.370 +/- 0.040
0.543 +/- 0.040
8.13 +/- 1.00
9.4 +/- 1.00
13.8 +/- 1.00
L1= L2 tolerance +/- 0.04 inch (1.0 mm)
Part Marking System
Littelfuse Logo
Part Marking
6-XXXX
Apply to P/N listed below:
AK6-030C-Y
AK6-058C-Y
Apply to P/N listed below:
AK6-170C-Y
AK6-190C-Y
AK6-240C-Y
AK6-380C-Y
AK6-066C-Y
AK6-076C-Y
Littelfuse Logo
AK6-430C-Y
Trace Code Marking
Y:Year Code
WW: Working Week Code
Part Marking
Trace Code Marking
Y:Year Code
Type 1- Side View
WW: Working Week Code
Type 2 - Top View
Part Numbering System
AK6 -XXXX
Packing Options
-Y
Component
Part Number
Packaging
Quantity
Package
Option
Yellow Coating
Series Type
AK6-XXXX-Y
AK Package
AK Package
56pcs/Box
12pcs/Box
Bulk
Bulk
Stand Off Voltage
(Please Refer to Electrical
Characteristics Chart)
AK6-XXXX-Y-12
Disclaimer Noꢀce - Informaꢀon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applicaꢀons. Liꢁelfuse products are not designed for, and may not be used in, all applicaꢀons.
Read complete Disclaimer Noꢀce at hꢁp://www.liꢁelfuse.com/disclaimer-electronics.
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/18/19
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明