CG5600LS [LITTELFUSE]
Surge Protection Circuit, PACKAGE-2;型号: | CG5600LS |
厂家: | LITTELFUSE |
描述: | Surge Protection Circuit, PACKAGE-2 电信 电信集成电路 |
文件: | 总5页 (文件大小:816K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Gas DischargeTube (GDT) Products
CG5 and SL0902A Series
®
CG5 and SL0902A Series
Description
Littelfuse Broadband Optimized™ SL0902A Series offers
high surge ratings in a miniature package. Special design
features provide high levels of protection against fast
rising transients in the 100V/μs to 1kV/μs range usually
caused by lightning disturbances. Low insertion loss is
perfectly suited to broadband equipment applications.
The capacitance does not vary with voltage, and will
not cause operational problems with ADSL2+, where
capacitance variation acrossTip and Ring is undesirable.
These devices are extremely robust and are able to
divert a 2500A pulse without destruction. For AC
Power Cross of long duration, overcurrent protection is
recommended.
Agency Approvals
Littelfuse CG5 MS mini surge arresters are specifically
designed for protection of electrical and communication
equipment against over voltage transients in surface
mount assembly applications. This series offers the most
cutting edge protection using non-radioactive elements.
AGENCY
AGENCY FILE NUMBER
E128662
®
2 Electrode GDT Graphical Symbol
Features
• RoHS compliant and
Lead-free
• Ultra small devices
offered in a variety of
mounting lead forms
• GHz working frequency
• Excellent stability on
• Non-Radioactive
multiple pulse duty cycle • Low capacitance (<1pF)
• Excellent response to
fast rising transients.
• Voltage Ranges 90V to
600V
• Ultra Low Insertion Loss • UL recognized
• 2.5KA surge capability
tested with 8/20μS
pulse as defined by IEC
61000-4-5
• Conforms to ITU-T K12,
IEC 1000-4-5
Applications
• Broadband equipment
• Communication
equipment
• ADSL equipment,
including ADSL2+
• CATV equipment
• Test equipment
• Data lines
• XDSL equipment
• Satellite and CATV
equipment
• Power supplies
• General telecom
equipment
• Telecom SLIC
protection
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
13
Revised: July 6, 2010
CG5 and SL0902A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
CG5 and SL0902A Series
Electrical Characteristics
Device Specifications (at 25°C)
Life Ratings
DC Breakdown
in Volts
Impulse
Impulse Insulation Capaci- Surge
Nominal Nominal
AC
Max
Breakdown Breakdown Resistance tance
Life
Impulse
AC
Dischage Impulse
in Volts
(@100V/µs)
In Volts
Discharge Discharge Current Discharge
(@100V/s)
(@1MHz)
(10/1000µs)
(9 cycle @50Hz)
Current
(8/20µs)
Current
Current
(1 Application
@ 10/350µs)
(@1 Kv/µsec)
(10x1sec
@50-60Hz)
Part Number
MIN TYP MAX
MAX
MIN
MAX
SL0902A90
CG590
1010
(at 50V)
Ω
72
90
108
550
700
650
300 shots 10 shots
(@100A) (@5kA)5
5 A
10 A
0.5kA
CG5145
CG5150
116 145 174
120 150 180
550
550
SL0902A230
CG5230
184 230 276
550
650
CG5250
CG5270
200 250 300
216 270 324
600
650
1.5 pf
1010
(at 100V)
Ω
SL0902A350
CG5350
300 shots 10 shots
(@100A) (@5kA)5
280 350 420
800
900
1000
1500
5 A
10 A
0.5kA
CG5400
320 400 480
336 420 504
440 550 660
900
900
SL0902A420
CG5550
1350
SL0902A600
CG5600
480 600 720
1350
Product Characteristics
CG5xxxLS (Outline 500), CG5xxxxLTR
& CG5350L-03TR (Outline 502), and
CG5xxxL-02 (Outline 503): Device
Nickel Plated 2–5 Microns WireTin Plated
17.5 12.5 Microns Construction Ceramic
Insulator.
Product Marking
LF Logo, Voltage and date code
< 0.5Amps
Glow to arc
transition current
Materials
GlowVoltage
140 Volts
CG5xxx (Outline 501), and CG5xxxMS
& SL0902AxxxSM (Outline 505):
DeviceTin Plated 17.5 12.5 Microns
Construction Ceramic Insulator.
Storage and
Operational
Temperature
-40 to +90
Typical Insertion Loss
Voltage vs.Time Characteristic
@ 1.0 GHz = 0.01 dB
@ 1.4GHz = 0.1 dB
@ 1.8 GHz = 0.53 dB
@ 2.1 GHz = 0.81 dB
@ 2.45 GHz= 1 dB
@ 2.8 GHz = 1.2 dB
@ 3.1 GHz = 1.5 dB
@ 3.5 GHz = 2.1 dB
Max dynamic breakover
voltage
Hold-over voltage
On-State voltage
0
200
400
600
800
1000
1200
Time (ns)
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
14
Revised: July 6, 2010
CG5 and SL0902A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
CG5 and SL0902A Series
Device Dimensions
Outline 500 - CG5xxxLS
Outline 503 - CG5xxxL-02 (except CG5600L-02, see Outline 502)
PROFILE VIEW
TOP VIEW
PROFILE VIEW
TOP VIEW
5.00 0.ꢀ0
[0.ꢀ97 0.00ꢂꢁ
5.00 0.ꢀ0
[0.ꢀ97 0.00ꢂꢁ
5.0 0.ꢀ
[0.197 0.008
5.30 0.30
[0.209 0.0ꢀ2ꢁ
5.0 0.ꢀ
[0.197 0.008]
3.0 0.ꢀ
[0.118 0.008]
0.80
[0.03ꢀꢁ
0.004
5.30 0.30
0.80DIA. TYP.
[0.031]
[0.209 0.0ꢀ2ꢁ
[0.0ꢀ6 0.00ꢀ2ꢁ
2 Surfaces
0.40 0.03
6.3
ꢀ
[2.480 0.079]
8.00 0.30
[0.3ꢀ5 0.0ꢀ2ꢁ
9.30 0.30
[0.366 0.0ꢀ2ꢁ
Outline 505 - CG5xxxMS and SL0902AxxxSM
SOLDER PAD LAYOUT
PROFILE VIEW
TOP VIEW
8.00
[0.3ꢀ5ꢁ
6.6 0.ꢀ
[0.260 0.008]
5.50
[0.2ꢀ6ꢁ
5.4 0.ꢁ5
[0.212 0.006]
1.80
[0.07ꢀꢁ
0.5 0.ꢁ
9.80
[0.3ꢂ6ꢁ
3.8
[0.15]
[0.02 0.004 ]
5.0 0.ꢀ
[0.197 0.008]
5.4 0.ꢁ5
[0.212 0.006]
Outline 501 - CG5xxx
SOLDER PAD LAYOUT
4.50
[0.18]
PROFILE VIEW
TOP VIEW
5.ꢁ0
[0.2]
5.0 0.ꢁ5
[0.197 0.006]
0.70
[0.028]
5.0 0.ꢀ
[0.197 0.008]
Outline 502 - CG5xxxLTR (also CG5350L-03TR, CG5600L-02)
PROFILE VIEW
TOP VIEW
CG5L-03
0.60 DIA. TYP.
[0.024]
5.0 0.ꢀ
[0.197 0.008]
CG5L &
CG5LTR (Outline 50ꢀ)
0.80 DIA. TYP.
[0.024]
5.0 0.ꢀ
[0.197 0.008]
6ꢀ
ꢀ
[2.441 0.079]
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
15
Revised: July 6, 2010
CG5 and SL0902A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
CG5 and SL0902A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
tP
Reflow Condition
-Temperature Min (Ts(min)
Pb – Free assembly
TP
Critical Zone
L to TP
Ramp-up
T
)
150°C
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (Min to Max) (ts)
60 – 180 secs
Ramp-down
Average ramp up rate (LiquidusTemp
(TL) to peak
Preheat
3°C/second max
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
-Temperature (TL) (Liquidus) 217°C
25
Reflow
time to peak temperature
(t 25ºC to peak)
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Soldering Parameters - Hand Soldering
Ramp-down Rate
6°C/second max
8 minutes Max.
260°C
Solder IronTemperature: 350° C +/- 5°C
HeatingTime: 5 seconds max.
Time 25°C to peakTemperature (TP)
Do not exceed
Soldering Parameters -Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
300
280
260
240
220
200
180
160
140
120
100
80
Wave Parameter
Preheat:
(Depends on Flux ActivationTemperature)
Temperature Minimum:
Temperature Maximum:
PreheatTime:
Lead-Free Recommendation
(Typical Industry Recommendation)
100° C
150° C
60-180 seconds
Solder PotTemperature:
Solder DwellTime:
280° C Maximum
2-5 seconds
60
40
Note: These devices are not recommended for IR
or Convection Reflow process.
20
0
Time (Seconds)
Preheat Time
Cooling Time
Dwell Time
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
16
Revised: July 6, 2010
CG5 and SL0902A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
CG5 and SL0902A Series
Part Numbering System and Ordering Information
CG5 xxx L TR
SL0902A xxx SM
Series
SL0902A
Series
CG5
Breakdown Voltage
90 = 90V
230 = 230V
350 = 350V
420 = 420V
Breakdown Voltage
90 = 90V
230 = 230V
350 = 350V
600 = 600V
Lead Option Code
SM = Surface Mount
Lead Option Code
(Blank) = Core Device (No Leads)
L = Straight Leads
(Packaging Option Code is not applicable for SL0902A)
LS = Shaped Leads
MS = Surface Mount
Packaging Option Code
(Blank) = Bulk (Applies to Core Devices Only)
TR = Tape & Reel
Packaging
Device Dimensions
Reference
Quantity and Packaging
Part Number and DeviceType
Description
CG5xxx
Core
Outline 501
Outline 500
1000pcs/bag in bulk packaging
900pcs/reel in carrier and tape*
CG5xxxLS
Shaped Leads
CG5xxxLTR
CG5xxxL-03TR**
Straight Axial Leads
Bent Radial Leads
Surface mount
Outline 502
Outline 503
Outline 505
1000pcs/reel in tape and reel*
50pcs/tray in tray and cover
900pcs/reel in carrier and tape*
CG5xxxL-02**
CG5xxxMS
SL0902AxxxSM
* For tape specifications and dimensions, please contact factory.
** Special order items not available for general sale. Please contact Littelfuse for details.
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
17
Revised: July 6, 2010
CG5 and SL0902A Series
Customer should verify actual device performance in their specific applications.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明