D6020LTP [LITTELFUSE]
Silicon rectifiers that are excellent for DC phase control applications with motor loads.; 矽整流器非常适合DC相位控制应用电机负载。型号: | D6020LTP |
厂家: | LITTELFUSE |
描述: | Silicon rectifiers that are excellent for DC phase control applications with motor loads. |
文件: | 总5页 (文件大小:598K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
15 / 20 / 25 Amp Rectifiers
Dxx15L & Dxx20L & Dxx25L Series
®
Description
Silicon rectifiers that are excellent for DC phase control
applications with motor loads.
Isolated mounting tab allows for use in circuits with
common anode or common cathode connections.
Features & Benefits
• RoHS Compliant
• Surge capability up to
350 A
• Glass – passivated
junctions
• Voltage capability up to
1000 V
Agency Approval
Applications
Agency
Agency File Number
L Package : E71639
Typical applications are AC to DC solid-state switches for
industrial power tools, exercise equipment, white goods,
and commercial appliances.
®
Internally constructed isolated package is offered for ease
of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
Main Features
Symbol
IT(RMS)
Value
Unit
A
15 / 20 / 25
400 to 1000
VRRM
V
Absolute Maximum Ratings
Value
Dxx20L
20
Test Conditions
Symbol
Parameter
Unit
Dxx15L
15
Dxx25L
25
IF(RMS)
IF(AV)
RMS forward current
A
A
Dxx15L:TC = 85°C
Dxx20L/Dxx25L:TC = 80°C
Average forward current
9.5
12.7
15.9
single half cycle; f = 50Hz;
TJ (initial) = 25°C
188
255
300
300
IFSM
Peak non-repetitive surge current
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C
225
210
350
508
I2t
I2t Value for fusing
tp = 8.3 ms
374
A2s
°C
Storage temperature range
-40 to 150
-40 to 125
Tstg
TJ
Operating junction temperature range
°C
Note: xx = voltage
Dxx15L & Dxx20L & Dxx25L Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
347
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 / 20 / 25 Amp Rectifiers
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Parameter
Test Conditions
Value
Unit
trr
Reverse-recoveryTime
IF=0.9A, IR=1.5A
TYP.
4
μs
Static Characteristics
Symbol
Test Conditions
15A Device IT = 30A; tp = 380μs
20A Device IT = 40A; tp = 380μs
25A Device IT = 50A; tp = 380μs
Value
Unit
VFM
MAX.
MAX.
1.6
V
400-600V
10
20
TJ = 25°C
800-1000V
400-800V
1000V
IRM
VRRM
500
3000
1000
μA
TJ = 100°C
TJ = 125°C
400-800V
Thermal Resistances
Symbol
Parameter
Value
Unit
Dxx15L
2.85
2.55
2.50
Junction to case (AC)
Dxx20L
Dxx25L
°C/W
Rθ(J-C)
Note: xx = voltage
Figure 1: On-State Current vs. On-State
Voltage (Typical)
Figure 2: Power Dissipation vs. RMS On-State
Current (Typical)
160
20
TJ = 25°C
Dxx25L
140
Dxx20L
Dxx20L
Dxx25L
16
12
8
120
Dxx15L
100
80
60
40
20
0
Dxx15L
4
Single pulse rectification
60Hz sine wave
0
0
2
4
6
8
10
12
14
16
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Instantaneous Forward Voltage (vF) – Volts
Average Forward Current [IF(AV)] - Amps
Dxx15L & Dxx20L & Dxx25L Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
348
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 / 20 / 25 Amp Rectifiers
Figure 3: Maximum Allowable CaseTemperature vs.
Figure 4: Surge Peak On-State Current vs.
Number of Cycles
Average On-State Current
1000
130
125
120
115
110
105
100
95
Dxx25L
Dxx20L
100
10
1
Dxx15L
Dxx25L
Dxx15L
90
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
Dxx20L
75
70
1
10
100
1000
0
2
4
6
8
10
12
14
16
18
Surge Current Duration -- Full Cycles
Average Forward Current [IF(AVE)] - Amps
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
Note: xx = voltage
RMS Forward Current : [IT(RMS)]: Maximum Rated
Value at Specific Case Temperature
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260°C +0/-5
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Dxx15L & Dxx20L & Dxx25L Series
©2010 Littelfuse, Inc
349
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 / 20 / 25 Amp Rectifiers
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin Plated
HighTemperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750: Method 1051
-40°C to 150°C, 15-minute dwell,
100 cycles
Temperature Cycling
Copper Alloy
BiasedTemperature & EIA/JEDEC: JESD22-A101
Humidity
320VDC, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
150°C, 1008 hours
HighTemp Storage
Design Considerations
Low-Temp Storage
Thermal Shock
Autoclave
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the rectifier. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
EIA/JEDEC: JESD22-A102
(Pressure CookerTest) 121°C, 100%RH, 2atm, 168 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
Lead Bend
ANSI/J-STD-002, Category 3, Test A
MIL-STD-750: Method 2036, Condition E
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
Dimension
O
8.13
.320
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
A
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
Not Used
CATHODE ANODE
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
K
J
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dxx15L & Dxx20L & Dxx25L Series
©2010 Littelfuse, Inc
350
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 / 20 / 25 Amp Rectifiers
Product Selector
Voltage
Part Number
Type
Package
400V
600V
800V
1000V
Dxx15L
Dxx20L
X
X
X
X
X
X
X
X
X
X
X
X
Rectifier
Rectifier
Rectifier
TO-220L
TO-220L
TO-220L
Dxx25L
Note: xx = Voltage
Packing Options
Part Number
Marking
Dxx15L
Dxx15L
Dxx20L
Dxx20L
Dxx25L
Dxx25L
Weight
Packing Mode
Bulk
Base Quantity
Dxx15L
2.2 g
2.2 g
2.2 g
2.2 g
2.2 g
2.2 g
500
Dxx15LTP
Dxx20L
Tube
500 (50 per tube)
500
Bulk
Dxx20LTP
Dxx25L
Tube
500 (50 per tube)
500
Bulk
Dxx25LTP
Note: xx = Voltage
Tube
500 (50 per tube)
Part Numbering System
Part Marking System
D 60 15 L 59
TO-220AB (L Package)
DEVICE TYPE
D: Rectifier
LEAD FORM DIMENSIONS
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
D6015L
MY
PACKAGE TYPE
CURRENT RATING
L: TO-220 (Isolated)
®
15: 15A
20: 20A
25: 25A
not
K
A
used
Dxx15L & Dxx20L & Dxx25L Series
©2010 Littelfuse, Inc
351
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明