FS127 [LITTELFUSE]

RELAY TIME DELAY 75FPM CHASSIS;


型号：	FS127
厂家：	LITTELFUSE
描述：	RELAY TIME DELAY 75FPM CHASSIS
文件：	总2页 (文件大小：262K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Flashers andTower Lighting Controls

Flashers

FS100 SERIES

Low Current Flasher

Description

The FS100 Series (low current) may be used to control inductive,

incandescent or resistive loads. This series offers a 1A (fullwave)

or a 2A (halfwave) steady state, 10A inrush solid-state output

and may be ordered with an input voltage of 24 or 120VAC. The

FS100 Series offers a factory ﬁxed ﬂash rate of 75 FPM or may

be ordered with a ﬁxed, custom ﬂash rate ranging from 45 to

150 FPM. Ideal for OEM applications where cost is a factor.

Operation

Upon application of input voltage, theT2 OFF time begins. At

the end of the OFF time, theT1 ON time begins and the load

energizes. At the end ofT1, T2 begins and the load de-energizes.

This cycle repeats until input voltage is removed.

Reset: Removing input voltage resets the output and the

sequence toT2.

Features & Beneﬁts

FEATURES

Wiring Diagram

BENEFITS

Compact Size:

Ideal for OEM applications

V = Voltage

L = Load

R = Red Wire

B = Black Wire

38 x 23.9mm (1.5” x 0.94”)

Custom Flash

Rates Available

Tailor to speciﬁc application: custom rates range

from 45 to 150 FPM

Accessories

P1023-2 “P” Clamp

Mounting Bracket Alum. 15/16

Ordering Information

MODEL

INPUT VAC

OUTPUT RATING A

OUTPUT TYPE AC LOAD TYPE

FLASH RATE

FS126

120

Fullwave

Incandescent & Resistive

75 FPM

45 FPM

60 FPM

75 FPM

45 FPM

75 FPM

FS126-45

FS126-60

FS126RC

FS126RC-45

FS127

120

Fullwave

Halfwave

Fullwave

120

Incandescent & Resistive

120

Incandescent, Resistive, & Inductive

Incandescent & Resistive

120

FS146

Incandescent & Resistive

Speciﬁcations

Incandescent, Resistive, & Inductive

FS146RC

If you don’t ﬁnd the part you need, call us for a custom product 800-843-8848

www.littelfuse.com/fs100Lowcurrent

Rev: 1-A-062116

Flashers andTower Lighting Controls

Flashers

FS100 SERIES

Speciﬁcations

Flasher Function Diagram

Technical Data

V = Voltage

R = Reset

FLASHER (OFF FIRST)

Operation

Flash Rate

OFF/ON solid-state ﬂasher (continuous duty)

Factory ﬁxed at 75 FPM 20%

L = Load

Custom Flash Rates Available From 45-150 FPM 20%

T1 = ONTime

T2 = OFFTime

T1 ≅T2

ON/OFF Ratio

Input

≅ 50%

Voltage

AC Line Frequency

Output

24, 120VAC, 15%

50/60Hz

Output

Load Type

Fullwave AC or Halfwave rectiﬁed AC

Incandescent, resistive, or inductive

(Choose RC sufﬁx for inductive loads)

Fullwave: 1A steady state

Halfwave: 2A steady state

10A

Maximum Load Rating

Inrush

Mechanical

Mounting

Removable mounting bracket, use one #8

(M4 x 0.7) screw

Connection/Wires

Dimensions

Protection

18 AWG (0.82mm2) wires 6 in. (15.2cm)

H 38.1 mm (1.5”); W 23.9 mm (0.94”)

Circuitry

Encapsulated

Environmental

Operating/Storage

Temperature

Humidity

-20° to 60°C / -40° to 85°C

95% relative, non-condensing

≅ 1.1 oz (31 g)

Weight

www.littelfuse.com/fs100Lowcurrent

Rev: 1-A-062116

相关型号：