P4SMA47AAUTO [LITTELFUSE]

Trans Voltage Suppressor Diode, 400W, 40.2V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN;
P4SMA47AAUTO
型号: P4SMA47AAUTO
厂家: LITTELFUSE    LITTELFUSE
描述:

Trans Voltage Suppressor Diode, 400W, 40.2V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN

文件: 总6页 (文件大小:591K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AutomotiveTransientVoltage Suppression Diodes  
Surface Mount – 400W > P4SMA Automotive Series  
RoHS  
P4SMA Automotive Series  
Description  
The P4SMA Automotive series is designed specifically  
to protect sensitive automotive equipment from voltage  
transients.  
Features  
• Halogen-Free  
• RoHS compliant  
• For surface mounted  
applications to optimize  
board space  
• Fast response time:  
typically less than 1.0ps  
from 0V to BV min  
• Excellent clamping  
capability  
Agency Approvals  
• Low incremental surge  
resistance  
Typical IR less than 1µA  
above 12V  
• HighTemperature  
soldering guaranteed:  
260°C/40 seconds at  
terminals  
• Plastic package has  
Underwriters Laboratory  
Flammability 94V-O  
• Low profile package  
• Built-in strain relief  
Typical maximum  
temperature coefficient  
ΔVBR = 0.1% x VBR@25°C x ΔT  
AGENCY  
AGENCY FILE NUMBER  
E230531  
• Glass passivated chip  
junction  
• 400W peak pulse power  
capability at 10×1000µs  
waveform, repetition rate  
(duty cycles):0.01%  
Maximum Ratings andThermal Characteristics  
(TA=25OC unless otherwise noted)  
Parameter  
Symbol  
PPPM  
Value  
400  
Unit  
W
Peak Pulse Power Dissipation at  
TA=25ºC by 10x1000µs waveform  
(Fig.1)(Note 1), (Note 2)  
• MatteTin Lead–free Plated  
Power Dissipation on infinite heat  
PM(AV)  
IFSM  
3.3  
40  
W
A
sink atTA=50OC  
Applications  
Peak Forward Surge Current, 8.3ms  
Single Half Sine Wave (Note 3)  
TVS devices are ideal for the protection of I/O Interfaces,  
CC bus and other vulnerable circuits used inTelecom,  
Computer, Industrial and Consumer electronic applications.  
V
Maximum Instantaneous Forward  
Voltage at 25A for Unidirectional  
only  
VF  
3.5V  
V
Operating Junction and Storage  
Temperature Range  
T , TSTG -65 to 150  
°C  
J
TypicalThermal Resistance Junction  
to Lead  
RuJL  
RuJA  
30  
°C/W  
°C/W  
TypicalThermal Resistance Junction  
to Ambient  
120  
Notes:  
1. Non-repetitive current pulse , per Fig. 3 and derated aboveTA = 25OC per Fig. 2 .  
2. Mounted on 0.2x0.2” (5.0 x 5.0mm) copper pad to each terminal.  
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional  
device only, duty cycle=4 per minute maximum.  
P4SMA Automotive Series  
©2009 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to www.littelfuse.com/series/P4SMAAUTO.html for current information.  
Revised: August 30, 2009 9:30 AM  
AutomotiveTransientVoltage Suppression Diodes  
Surface Mount – 400W > P4SMA Series  
Electrical Characteristics  
Maximum Maximum Maximum  
Breakdown  
Voltage VBR  
(Volts) @ IT  
Test  
Current  
IT  
Reverse  
Stand off  
Voltage VR  
(Volts)  
Agency  
Approval  
Part  
Number  
(Uni)  
Part  
Number  
(Bi)  
Clamping  
Voltage VC  
@ I  
Peak  
Pulse  
Current Ipp  
(A)  
Reverse  
Leakage IR  
@ VR  
Marking  
UNI BI  
(V)pp  
(µA)  
(mA)  
MIN  
MAX  
P4SMA12AAUTO P4SMA12CAAUTO 12AA 12CA  
P4SMA13AAUTO P4SMA13CAAUTO 13AA 13CA  
P4SMA15AAUTO P4SMA15CAAUTO 15AA 15CA  
P4SMA16AAUTO P4SMA16CAAUTO 16AA 16CA  
P4SMA18AAUTO P4SMA18CAAUTO 18AA 18CA  
P4SMA20AAUTO P4SMA20CAAUTO 20AA 20CA  
P4SMA22AAUTO P4SMA22CAAUTO 22AA 22CA  
P4SMA24AAUTO P4SMA24CAAUTO 24AA 24CA  
P4SMA27AAUTO P4SMA27CAAUTO 27AA 27CA  
P4SMA30AAUTO P4SMA30CAAUTO 30AA 30CA  
P4SMA33AAUTO P4SMA33CAAUTO 33AA 33CA  
P4SMA36AAUTO P4SMA36CAAUTO 36AA 36CA  
P4SMA39AAUTO P4SMA39CAAUTO 39AA 39CA  
P4SMA43AAUTO P4SMA43CAAUTO 43AA 43CA  
P4SMA47AAUTO P4SMA47CAAUTO 47AA 47CA  
10.20  
11.10  
11.40  
12.40  
14.30  
15.20  
17.10  
12.60  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
16.7  
18.2  
21.2  
22.5  
25.5  
27.7  
30.6  
33.2  
37.5  
41.4  
45.7  
49.9  
53.9  
59.3  
64.8  
24.6  
22.5  
19.3  
18.2  
16.1  
14.8  
13.4  
12.3  
10.9  
9.9  
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
13.70  
15.80  
16.80  
18.90  
21.00  
23.10  
25.20  
28.40  
31.50  
34.70  
37.80  
41.00  
45.20  
49.40  
12.80  
13.60  
15.30  
17.10  
19.00  
20.90  
22.80  
25.70  
28.50  
31.40  
34.20  
37.10  
40.90  
44.70  
18.80  
20.50  
23.10  
25.60  
28.20  
30.80  
33.30  
36.80  
40.20  
9.0  
8.2  
7.6  
6.9  
6.3  
The avaliable parts are A” type only, the parts without A (VBR is ± 10%) is not avaliable.  
P4SMA Automotive Series  
©2009 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to www.littelfuse.com/series/P4SMAAUTO.html for current  
information.  
Revised: August 30, 2009 9:24 AM  
AutomotiveTransientVoltage Suppression Diodes  
Surface Mount – 400W > P4SMA Automotive Series  
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)  
Figure 1 - Peak Pulse Power Rating  
Figure 2 - Pulse Derating Curve  
10  
100  
80  
60  
40  
20  
0
1
0.2x0.2" (5.0x5.0mm)  
Copper Pad Area  
0.1  
0.000001  
0.00001  
0.0001  
0.001  
0
25  
50  
75  
100 125  
150 175  
TA-Ambient temperature (ºC)  
td-Pulse Width (sec.)  
Figure 3 - PulseWaveform  
Figure 4 -Typical Junction Capacitance  
10000  
150  
t =10µsec  
r
T
=25°C  
J
Pulse Width(td) is defined  
as the point where the peak  
Bi-directional V=0V  
current decays to 50% of I  
PPM  
Peak Value  
1000  
Uni-directional V=0V  
I
100  
PPM  
Uni-directional @VR  
Half Value  
100  
10  
1
I
PPM  
I
PPM  
( )  
2
Bi-directional @VR  
50  
0
10/1000µsec. Waveform  
as defined by R.E.A  
Tj=25ºC  
f=1.0MHz  
Vsig=50mVp-p  
t
d
1.0  
10.0  
100.0  
1000.0  
1.0  
2.0  
t-Time (ms)  
3.0  
4.0  
0
VBR - Reverse Breakdown Voltage (V)  
Figure 6 - Maximum Non-Repetitive Forward Surge  
Current Uni-Directional Only  
Figure 5 - Steady State Power Dissipation Derating Curve  
1.2  
1
45  
40  
35  
30  
25  
20  
15  
10  
5
0.8  
0.6  
0.4  
0.2  
0
0
0
25  
50  
75  
100 125 150 175  
1
10  
100  
TA - Ambient Temperature (ºC)  
Number of Cyles at 60 Hz  
P4SMA Automotive Series  
©2009 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to www.littelfuse.com/series/P4SMAAUTO.html for current information.  
Revised: August 30, 2009 9:30 AM  
AutomotiveTransientVoltage Suppression Diodes  
Surface Mount – 400W > P4SMA Series  
Soldering Parameters  
Reflow Condition  
Lead–free assembly  
tp  
TP  
-Temperature Min (Ts(min)  
)
150°C  
Ramp-up  
Critical Zone  
to T  
T
L
P
TL  
Pre Heat -Temperature Max (Ts(max)  
)
200°C  
tL  
Ts(max)  
-Time (min to max) (ts)  
60 – 180 secs  
Average ramp up rate (LiquidusTemp  
(TL) to peak  
Ramp-down  
3°C/second max  
Ts(min)  
ts  
Preheat  
TS(max) toTL - Ramp-up Rate  
3°C/second max  
217°C  
-Temperature (TL) (Liquidus)  
Reflow  
25˚C  
t 25˚C to Peak  
Time (t)  
-Time (min to max) (ts)  
60 – 150 seconds  
260+0/-5 °C  
PeakTemperature (TP)  
Time within 5°C of actual peak  
Temperature (tp)  
20 – 40 seconds  
Ramp-down Rate  
6°C/second max  
8 minutes Max.  
280°C  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Physical Specifications  
Environmental Specifications  
Weight  
Case  
0.002 ounce, 0.061 gram  
Temperature Cycle  
Pressure Cooker  
HighTemp. Storage  
HTRB  
JESD22-A104  
JESD 22-A102  
JESD22-A103  
JESD22-A108  
JESD22-A106  
JEDEC DO-214AC. Molded plastic body  
over glass passivated junction  
Color band denotes positive end  
(cathode) except bidirectional  
Polarity  
MatteTin-plated leads, Solderable per  
JESD22-B102D  
Terminal  
Thermal Shock  
Dimensions  
DO-214AC (SMA)  
Inches  
Millimeters  
Dimensions  
Cathode Band  
Min  
Max  
Min  
Max  
A
B
C
D
E
F
G
H
I
0.049  
0.157  
0.100  
0.078  
0.030  
-
0.065  
0.177  
0.110  
0.090  
0.060  
0.008  
0.208  
0.012  
-
1.250  
3.990  
2.540  
1.980  
0.780  
-
1.650  
C
A
D
4.500  
2.790  
2.290  
1.520  
0.203  
5.280  
0.305  
-
B
H
0.194  
0.006  
0.070  
0.082  
-
4.930  
0.152  
1.800  
2.100  
-
F
E
G
J
K
L
J
-
-
K
L
0.090  
-
2.300  
-
I
0.082  
2.100  
P4SMA Automotive Series  
©2009 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to www.littelfuse.com/series/P4SMAAUTO.html for current  
information.  
Revised: August 30, 2009 9:24 AM  
AutomotiveTransientVoltage Suppression Diodes  
Surface Mount – 400W > P4SMA Automotive Series  
Part Numbering System  
Part Marking System  
Cathode Band  
P4SMA XXX C A AUTO  
F
5%VOLTAGETOLERANCE  
BI-DIRECTIONAL  
VOLTAGE  
SERIES  
Littelfuse Logo  
Marking Code  
Packaging  
Component  
Package  
Packaging  
Option  
Part number  
Quantity  
Packaging Specification  
P4SMAxxxXXAUTO  
DO-214AC  
5000  
Tape & Reel – 12mm/13” tape  
EIA STD RS-481  
P4SMA Automotive Series  
©2009 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to www.littelfuse.com/series/P4SMAAUTO.html for current information.  
Revised: August 30, 2009 9:30 AM  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY