QK010N5RP [LITTELFUSE]
TRIAC 1KV 10A TO263;型号: | QK010N5RP |
厂家: | LITTELFUSE |
描述: | TRIAC 1KV 10A TO263 三端双向交流开关 |
文件: | 总9页 (文件大小:469K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
RoHS
Description
The Qxx10xx and Qxx10xHx Series are 10 Amp bi-directional solid
state switches. They are designed for AC switching and phase
control applications such as motor speed and temperature
modulation controls, lighting controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Features & Benefits
■ RoHS-compliant
■ No contacts to wear out from
reaction of switching events
■ Glass – passivated junctions
■ Restricted (or limited) RFI
generation, depending on
activation point sine wave
■ Voltage capability up to 1000
V
■ Surge capability up to 120 A
Additional Information
■ UL Recognized to UL 1557
as an Electrically Isolated
Semiconductor Device
■ 2500Vrms min. isolation
between mounting tab and
active terminals
■ Solid-state switching
eliminates arcing or contact
bounce that create voltage
transients
Resources
Accessories
Samples
Agency Approval
Applications
Agency
Agency File Number
Alternistor type devices are used in applications requiring high
commutation performance such as controlling inductive loads.
Isolated packages are offered with internal construction, having
the case or mounting tab electrically isolated from the
semiconductor chip.
E71639*
* - L Package Only
Main Features
Schematic Symbol
Symbol
IT(RMS)
Value
10
Unit
A
VDRM/VRRM
IGT (Q1)
400 to 1000
5 to 50
V
MT2
MT1
mA
G
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
1
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — StandardTriac
Symbol
Parameter
Value
Unit
Qxx10Ry/Qxx10Ny
TC = 95°C
TC = 90°C
t = 20 ms
t = 16.7 ms
IT(RMS)
RMS on-state current (full sine wave)
10
A
Qxx10Ly
f = 50 Hz
f = 60 Hz
100
120
60
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
A
I2t
I2t Value for fusing
tp = 8.3 ms
A2s
Critical rate of rise of on-state current
IG = 200mA with ≤ 0.1μs rise time
di/dt
f = 120 Hz
tp ≤ 10 μs
TJ = 125°C
70
A/μs
IGTM
PG(AV)
Tstg
Peak gate trigger current
Average gate power dissipation
Storage temperature range
TJ = 125°C
TJ = 125°C
1.8
A
IGT ≤ IGTM
0.5
W
°C
°C
-40 to 150
-40 to 125
TJ
Operating junction temperature range
Absolute Maximum Ratings — AlternistorTriac (3 Quadrants)
Symbol
Parameter
Value
Unit
Qxx10LHy
Qxx10RHy/Qxx10NHy
f = 50 Hz
TC = 90°C
TC = 95°C
t = 20 ms
t = 16.7 ms
IT(RMS)
RMS on-state current (full sine wave)
10
A
110
120
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
A
f = 60 Hz
I2t
di/dt
IGTM
PG(AV)
Tstg
I2t Value for fusing
tp = 8.3 ms
60
A2s
A/μs
A
Critical rate of rise of on-state current
Peak gate trigger current
f = 120 Hz
tp ≤ 10 μs
IGT ≤ IGTM
-
TJ = 125°C
TJ = 125°C
TJ = 125°C
70
2.0
Average gate power dissipation
Storage temperature range
0.5
W
-
-
-40 to 150
-40 to 125
°C
TJ
Operating junction temperature range
°C
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — StandardTriac
Symbol
Test Conditions
Quadrant
Qxx10x4
25
Qxx10x5
50
Unit
I – II – III
IV
IGT
VD = 12V RL = 60 Ω
MAX.
mA
50
75 (TYP)
VGT
VGD
IH
VD = 12V RL = 60 Ω
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA
I – II – III
ALL
MAX.
MIN.
MAX.
1.3
V
V
0.2
35
150
100
75
50
225
200
175
150
4
mA
400V
600V
800V
1000V
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 5.4 A/ms TJ = 125°C
50
(dv/dt)c
tgt
TYP.
TYP.
2
V/μs
μs
IG = 2 x IGT PW = 15µs IT = 14.1 A(pk)
3.0
3.0
Note: xx = voltage, x = package, y = sensitivity
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
2
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — AlternistorTriac (3 Quadrants)
Value
Symbol
Test Conditions
Quadrant
Unit
Qxx10xH2
Qxx10xH5
50
IGT
VGT
VGD
IH
MAX
MAX
MIN
5
1.3
0.2
10
-
m A
V
VD=12V, RL=60Ω
I-II-III
1.3
VD=VDRM, RL=3.3kΩ,TJ=125°C
Initial IT=100mA
0.2
50
V
MAX
m A
400V
600V
800V
1000V
800V
750
650
500
300
-
VD=VDRM, Gate Open, TJ=125°C
-
V/us
dv/dt
MIN.
-
VD=VDRM, Gate Open, TJ=100°C
VD=2/3VDRM, Gate Open,TJ=125°C
(di/dt)/c=5.4 A/ms, TJ=125°C
-
150
3.5
3
(dv/dt)/c
tgt
TYP.
TYP.
30
V/us
µs
IG = 2 X IGT, PW=15µs, IT=14.1A(pk)
4
Static Characteristics
Symbol
Test Conditions
Value
1.60
10
Unit
V
VTM
ITM = 14.1A tp = 380 µs
MAX.
TJ = 25°C
TJ = 125°C
TJ = 100°C
400 - 600V
400 - 800V
1000V
μA
IDRM
IRRM
VDRM = VRRM
MAX.
2
mA
3
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx10Ryy/Qxx10Nyy
Qxx10Lyy
1.3
2.6
45
RƟ(J-C)
Junction to case (AC)
°C/W
°C/W
Qxx10Ryy
RƟ(J-A)
Junction to ambient (AC)
Qxx10Lyy
50
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
3
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Figure 1:
Figure 2:
Definition of Quadrants
Normalized DC GateTrigger Current for
All Quadrants vs. JunctionTemperature
ALL POLARITIES ARE REFERENCED TO MT1
4.0
3.0
2.0
1.0
0.0
MT2 POSITIVE
(Positive Half Cycle)
MT2
MT2
+
(-)
I
(+)
I
GT
GT
GATE
GATE
MT1
MT1
REF
REF
QII QI
I
-
+I
GT
GT
QIII QIV
MT2
MT2
(-)
I
(+)
I
GT
GT
GATE
GATE
MT1
REF
MT1
REF
+125
-65
-40
-15
10
35
60
85
110
-
Junction Temperature (TJ) - ºC
MT2 NEGATIVE
(Negative Half Cycle)
Note: Alternistors will not operate in QIV
Figure 3:
Figure 4:
Normalized DC Holding Current
vs. JunctionTemperature
Normalized DC GateTrigger Voltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
+125
110
+125
-65
-40
-15
10
35
60
85
-65
-40
-15
10
35
60
85
110
Junction Temperature (TJ) - ºC
Junction Temperature (TJ) - ºC
Figure 5:
Figure 6:
Power Dissipation (Typical)
vs. RMS On-State Current
Maximum Allowable CaseTemperature
vs. On-State Current
12
10
8
130
120
110
100
90
Qxx10Ryy
Qxx10Nyy
Qxx10Lyy
6
4
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
70
2
60
0
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
RMS On-State Current [IT(RMS)] - AMPS
RMS On-State Current [IT(RMS)] - AMPS
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
4
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Figure 7:
Figure 8:
Maximum Allowable AmbientTemperature
vs. On-State Current
On-State Current vs. On-State Voltage (Typical)
120
110
100
90
20
18
16
14
12
10
8
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive CONDUCTION
ANGLE: 360º
TC = 25 ºC
FREE AIR RATING - NO HEATSINK
80
Qxx10LHy
Qxx10RHy
70
60
Qxx10Ly
Qxx10Ry
6
50
4
40
2
30
0
20
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Positive or Negative Instantaneous On-State Voltage
(VT) - Volts
RMS On-State Current [IT(RMS)] - AMPS
Figure 9:
Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
100
10
1
Notes:
1. Gate control may be lost during and immediately following surge
current interval.
2. Overload may not be repeated until junction temperature has returned
to steady-state rated value.
1
10
100
1000
Surge Current Duration - Full Cycles
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 05/10/21
5
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Reflow Condition
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
Pb – Free assembly
150°C
tP
)
TP
Pre Heat
)
200°C
Ramp-up
60 – 180 secs
TL
TS(max)
tL
Average ramp up rate (LiquidusTemp) (TL) to
peak
5°C/second max
Ramp-down
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
TS(min)
tS
-Time (min to max) (ts)
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
25
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
20 – 40 seconds
5°C/second max
8 minutes Max.
280°C
time to peak temperature
Time
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Terminal Finish
Body Material
100% MatteTin-plated
UL recognized epoxy meeting flammabilty
classification 94V-0.
Test
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
AC Blocking
Terminal Material
Copper Alloy
MIL-STD-750, M-1051, 100 cycles; -40°C
to +150°C, 15-min dwell-time
Temperature Cycling
Temperature/Humidity
EIA/JEDEC, JESD22-A101 1008 hours;
320V - DC: 85°C; 85% rel humidity
Design Considerations
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
HighTemp Storage
Low-Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way toward
extending the operating life of the Thyristor. Good design practice
should limit the maximum continuous current through the main
terminals to 75% of the device rating. Other ways to ensure long
life for a power discrete semiconductor are proper heat sinking and
selection of voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are the main
killers of semiconductors. Correct mounting, soldering, and
forming of the leads also help protect against component damage.
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3Test A
MIL-STD-750, M-2036 Cond E
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 05/10/21
6
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions - TO-220AB (R-Package) - Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
Ø
E
P
Min
Max
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
MT2
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
AREA (REF.)
13.36
.526
2
0.17 in
D
7.01
.276
F
F
G
H
J
K
L
M
N
O
P
NOTCH IN GATE LEAD
TO ID. NON-ISOLATED TAB
R
G
L
H
K
N
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
M
MT1 MT2
GATE
R
0.965
1.22
Dimensions - TO-220AB (L-Package) - Isolated Mounting Tab
TC MEASURING POINT
Inches
Millimeters
Dimension
O
Min
Max
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
8.13
.320
A
Ø
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
B
C
AREA (REF.)
2
13.36
.526
0.17 in
D
7.01
.276
F
G
H
J
K
L
M
N
O
P
F
R
G
L
H
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
GATE
R
0.965
1.22
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
7
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions - TO-263AB (N-Package) - D2-PAK Surface Mount
TC MEASURING POINT
AREA: 0.11 IN2
Inches
Millimeters
C
B
V
Dimension
E
Min
Max
Min
9.14
9.65
4.52
0.64
1.14
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.016
Max
9.40
10.67
4.78
0.89
1.52
1.91
2.67
2.59
0.61
2.79
15.88
1.14
MT2
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
8.41
.331
7.01
.276
A
S
W
U
F
J
K
GATE
MT1
G
H
J
K
S
V
U
W
8.13
.320
G
H
D
F
11.68
.460
2.16
.085
0.25
1.78
7.01
.276
7.01
.276
16.89
.665
8.89
.350
1.40
.055
3.81
.150
2.03
.080
6.60
.260
Product Selector
Voltage (xx)
600V 800V
Gate Sensitivity Quadrants
Part Number
Type
Package
400V
1000V
I – II – III
IV
Qxx10LH2
Qxx10RH2
Qxx10NH2
Qxx10L4
Qxx10R4
Qxx10N4
Qxx10L5
Qxx10R5
Qxx10N5
Qxx10LH5
Qxx10RH5
Qxx10NH5
-
-
-
-
-
-
X
-
-
-
5 mA
5 mA
5 mA
-
-
-
AlternistorTriac
AlternistorTriac
AlternistorTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
TO-220L
TO-220R
TO-263 D2-PAK
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
TO-220R
TO-263 D²-PAK
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
25 mA
25 mA
25 mA
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
-
TYP. 75 mA
TYP. 75 mA
TYP. 75 mA
-
-
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Qxx10L/RyyTP
Qxx10NyyTP
Qxx10NyyRP
Qxx10L/Ryy
Qxx10Nyy
Qxx10Nyy
2.2 g
1.6 g
1.6 g
Tube Pack
Tube
Embossed Carrier
1000 (50 per tube)
1000 (50 per tube)
500
Note: xx = voltage, yy = type & sensitivity
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
8
Revised: GD. 05/10/21
Thyristor Datasheet
Qxx10xx & Qxx10xHx Series
10 Amp Standard & Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
MT1
0.059
(1.5)
DIA
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
TO-220 AB - (L and R Package)
TO-263 AB - (N Package)
Q 60 10 L H5 56
DEVICE TYPE
Q: Triac or Alternistor
LEAD FORM DIMENSIONS
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
SENSITIVITY
Standard Triac:
4: 25 mA (QI, II, III)
50 mA (QIV)
Q6010R5
YMXXX
5: 50 mA (QI, II, III)
Alternistor Triac:
H2: 5mA(QI, II, II)
H5: 50mA (QI, II, III)
CURRENT RATING
10: 10A
®
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
N: TO-263 (D2Pak)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
9
Revised: GD. 05/10/21
相关型号:
QK010N5TP
4 Quadrant Logic Level TRIAC, 1000V V(DRM), 10A I(T)RMS, TO-263AB, TO-263, D2PAK-3
LITTELFUSE
QK010N5TP56
TRIAC, 1000V V(DRM), 10A I(T)RMS, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3/2
LITTELFUSE
QK010NH556
Alternistor TRIAC, 1000V V(DRM), 10A I(T)RMS, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3/2
LITTELFUSE
QK010NH5TP56
Alternistor TRIAC, 1000V V(DRM), 10A I(T)RMS, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3/2
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明