S4016RTP [LITTELFUSE]
Silicon Controlled Rectifier, 16A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC, TO-220R, 3 PIN;型号: | S4016RTP |
厂家: | LITTELFUSE |
描述: | Silicon Controlled Rectifier, 16A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC, TO-220R, 3 PIN 局域网 栅 栅极 |
文件: | 总8页 (文件大小:929K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
®
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 1000 V
• Glass – passivated
junctions
• Surge capability up to
225 A
Applications
Agency Approval
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Agency
Agency File Number
L Package: E71639
®
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Main Features
Schematic Symbol
Symbol
IT(RMS)
Value
15 & 16
400 to 1000
30
Unit
A
VDRM/VRRM
IGT
V
A
K
mA
G
Absolute Maximum Ratings — Standard SCRs
Symbol
Parameter
Test Conditions
Value
Unit
Sxx15L
TC = 90°C
15
IT(RMS)
RMS on-state current
A
Sxx16R
Sxx16N
TC = 110°C
TC = 90°C
TC = 110°C
16
9.5
Sxx15L
IT(AV)
Average on-state current
A
A
Sxx16R
Sxx16N
10.0
single half cycle; f = 50Hz;
188
225
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
TJ (initial) = 25°C
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60 Hz ;TJ = 125°C
TJ = 125°C
210
125
A2s
A/μs
A
di/dt
IGM
3
PG(AV)
Average gate power dissipation
Storage temperature range
0.6
W
TJ = 125°C
-40 to 150
-40 to 125
°C
Tstg
TJ
Operating junction temperature range
°C
Note: xx = voltage
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
261
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Value
Symbol
Test Conditions
Unit
Sxx15x
Sxx16x
MAX.
MIN.
MAX.
30
1
IGT
mA
V
VD = 12V; RL = 60 Ω
VGT
1.5
400V
600V
800V
1000V
400V
600V
800V
450
425
400
200
350
325
300
VD = VDRM; gate open;TJ = 100°C
dv/dt
MIN.
V/μs
VD = VDRM; gate open;TJ = 125°C
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IT = 200mA (initial)
MIN.
MAX.
MAX.
TYP.
0.2
40
35
2
V
mA
μs
tq
IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
tgt
μs
Note: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
15A Device IT = 30A; tp = 380 µs
16A Device IT = 32A; tp = 380 µs
Value
Unit
VTM
MAX.
MAX.
1.6
V
400 - 600V
10
TJ = 25°C
TJ = 100°C
TJ = 125°C
800 - 1000V
400 - 600V
800V
20
500
I
DRM / IRRM
VDRM = VRRM
1000
3000
1000
2000
μA
1000V
400 - 600V
800V
Thermal Resistances
Symbol
Parameter
Value
1.1
Unit
Sxx16R/ Sxx16N
Junction to case (AC)
°C/W
°C/W
Rθ(J-C)
Sxx15L
Sxx16R
Sxx15L
2.5
40
Junction to ambient
Rθ(J-A)
50
Note: xx = voltage
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
262
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
60
85
110
125
JunctionTemperature (TJ) -- (ºC)
JunctionTemperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
2.0
1.5
1.0
0.5
0.0
60
50
40
30
20
10
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
-40
-15
10
35
60
85
110
125
Instantaneous On-state Voltage (vT) – Volts
JunctionTemperature (TJ) -- (°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
14
12
10
8
130
125
Sxx16R
Sxx16N
120
115
110
105
100
95
Sxx15L
6
4
90
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
2
85
80
0
0
2
4
6
8
10
12
14
16
18
0
2
4
6
8
10
12
14
16
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [I T(RMS) ] - (Amps)
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
263
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Figure 7: Maximum Allowable CaseTemperature
Figure 8: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
vs. Average On-State Current
130
125
120
115
110
105
100
95
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Sxx16R
Sxx16N
Sxx15L
90
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
85
80
0
25
50
75
100
125
150
0
1
2
3
4
5
6
7
8
9
10
11
Average On-State Current [IT(AVE) ] - Amps
CaseTemperature (TC ) - °C
Figure 9: Maximum Allowable AmbientTemperature vs. Average On-State Current
120
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
100
FREE AIR RATING
Sxx16R
Sxx16N
80
60
40
20
0
Sxx15L
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage
Figure 10: Peak Capacitor Discharge Current
Figure 11: Peak Capacitor Discharge Current Derating
1000
1.2
1.0
0.8
0.6
0.4
0.2
0.0
100
ITRM
tW
10
0
25
50
75
100
125
150
0.5
1.0
10.0
50.0
CaseTemperature (TC ) - °C
Pulse Current Duration (tw) - ms
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
264
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Figure 12: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Sxx16R
Sxx16N
100
Sxx15L
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
265
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
266
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO- 263AA (N-package) — D2-Pak Surface Mount
T
C MEASURING POINT
C
2
AREA: 0.11 in
Inches
Millimeters
B
V
Dimension
E
ANODE
Min
Max
Min
Max
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
9.14
9.65
4.52
0.64
1.14
9.40
10.67
4.78
0.89
1.52
7. 01
.276
A
S
W
U
J
K
GATE
CATHODE
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
8.13
.320
G
H
D
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
F
11.68
.460
2.16
.085
K
7. 01
7. 01
S
.276
.276
16.89
.665
V
8.89
.350
1.40
.055
U
W
0.25
1.78
3.81
.150
2.03
.080
6.60
.260
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
267
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 and 16 Amp Standard SCRs
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
600V
800V
1000V
Sxx15L
Sxx16R
X
X
X
X
X
X
X
X
X
X
X
X
30mA
30mA
30mA
Standard SCR
Standard SCR
Standard SCR
TO-220L
TO-220R
TO-263
Sxx16N
Note: xx = Voltage
Packing Options
Part Number
Sxx15L
Marking
Weight
Packing Mode
Base Quantity
Sxx15L
Sxx15L
Sxx16R
Sxx16R
Sxx16N
Sxx16N
2.2 g
2.2 g
2.2 g
2.2 g
1.6 g
1.6 g
Bulk
Tube
500
Sxx15LTP
Sxx16R
500 (50 per tube)
500
Bulk
Sxx16RTP
Sxx16NTP
Tube
500 (50 per tube)
500 (50 per tube)
500
Tube
Sxx16NRP
Embossed Carrier
Note: xx = Voltage
Part Marking System
TO-263 Embossed Carrier Reel Pack (RP) Specs
Meets all EIA-481-2 Standards
Sxx16R
Sxx16L
MY
YM
®
®
0.059
(1.5)
DIA
0.63
(16.0)
0.157
(4.0)
Gate
Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
Anode
Part Numbering System
12.99
(330.0)
0.512 (13.0)
Arbor Hole
Diameter
Dimensions
are in inches
(and millimeters).
S 60 16 R 56
DEVICE TYPE
S: SCR
LEAD FORM DIMENSIONS
xx: Lead Form Option
1.01
(25.7)
VOLTAGE RATING
SENSITIVITY & TYPE
(blank): 30mA
40: 400V
60: 600V
80: 800V
K0: 1000V
Direction of Feed
PACKAGE TYPE
CURRENT RATING
15: 15A
16: 16A
L: TO-220 Isolated
R: TO-220 Non-Isolated
N: TO-263 (D2-Pak)
Sxx15x & Sxx16x Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
268
Revised:November1, 2010 05:04PM
相关型号:
S401E75
Silicon Controlled Rectifier, 1A I(T)RMS, 640mA I(T), 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
S401ERP
Silicon Controlled Rectifier, 1A I(T)RMS, 640mA I(T), 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明