SJ6012VTP [LITTELFUSE]
Silicon Controlled Rectifier,;
| 型号： | SJ6012VTP |
| 厂家： | 
LITTELFUSE |
| 描述： | Silicon Controlled Rectifier, |
| 文件： | 总10页 (文件大小：531K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
12 Amp High Junction Temperature SCRs
SJxx12xx series
RoHS
Description
This SJxx12xx high junction temperature SCR series is
ideal for uni-directional switch applications such as phase
control in heating, motor speed controls, converters/
rectifiers, inrush current control and capacitive discharge
ignitions.
These SCRs have a low gate current trigger level of 6mA,
10mA or 20mA maximum at approximately 1.5V.
Features & Benefits
• Halogen free and RoHS
compliant
• Surge capability up to 120
A at 60 Hz half cycle
• 150°C maximum junction
temperature
Agency Approval
Applications
Agency
Agency File Number
Typical applications include AC Generator (ACG) rectifiers,
battery voltage regulators and generic converters and
inrush current controller in various AC to DC applications.
Additional applications include controls for power tools,
home/brown good and white goods appliances.
L Packages: E71639
Schematic Symbol
Isolated packages offered for ease of heat sinking.
A
K
G
Main Features
Symbol
IT(RMS)
Value
Unit
A
12
VDRM/VRRM
IGT
400 or 600
6 to 20
V
mA
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx12xx Series
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Absolute Maximum Ratings
Symbol
Parameter
Peak non-repetitive blocking voltage
Test Conditions
Value
Unit
V
DSM/VRSM
Pw=100 μs
VDRM/VRRM+100
V
SJxx12Lx
TC = 110°C
TC = 135°C
SJxx12Rx
SJxx12Nx
IT(RMS)
RMS on-state current
12
A
SJxx12Dx
SJxx12Vx
TC = 125°C
TC = 110°C
TC = 135°C
SJxx12Lx
SJxx12Rx
SJxx12Ny
IT(AV)
Average on-state current
7. 6
A
A
SJxx12Dx
SJxx12Vx
TC = 125°C
f = 50Hz
f = 60Hz
100
120
Peak non-repetitive surge current
(single half cycle, TJ (initial) = 25°C)
ITSM
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
60
A2s
A/μs
A
di/dt
IGM
100
f = 60Hz; TJ = 150°C
2
TJ = 150°C
TJ = 150°C
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.5
W
-40 to 150
-40 to 150
°C
Operating junction temperature range
Note: xx=voltage/10, x=sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) - TO-220L ,TO-220R andTO-263 package
Symbol
Test Conditions
SJxx12x
20
SJxx12x1
SJxx12x2
Unit
MAX.
MIN.
MAX.
6
2
10
5
IGT
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
mA
V
8
VGT
1.5
1.5
70
-
1.5
500
200
VD = 67% VDRM; gate open;TJ = 125°C
VD = 67% VDRM; gate open;TJ = 150°C
800
400
dv/dt
MIN.
V/μs
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA (initial)
MIN.
MAX.
MAX.
TYP.
0.2
60
40
2
0.2
15
40
2
0.2
35
40
2
V
mA
μs
tq
IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs
IG = 2 x IGT PW = 15µs IT = 24A
tgt
μs
Note: xx=voltage/10, x=package
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
S
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) - TO-251 andTO-252 package
Value
Symbol
Test Conditions
Unit
SJxx12x1
SJxx12x
20
MAX.
MIN.
MAX.
6
2
IGT
mA
V
VD = 12V RL = 60 Ω
5
VGT
1.5
100
75
50
1.5
400V
600V
400V
600V
250
225
200
VD = VDRM; gate open;TJ = 125°C
VD = VDRM; gate open;TJ = 150°C
dv/dt
MIN.
V/μs
10
0.2
0.1
20
175
0.2
0.1
40
35
2
VD = VDRM RL = 3.3 kΩ TJ = 125°C
VD = VDRM RL = 3.3 kΩ TJ = 150°C
IT = 200mA (initial)
MIN.
MIN.
MAX.
MAX.
TYP.
VGD
V
IH
tq
mA
μs
IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
35
tgt
0.5
μs
Note: xx=voltage/10, x=package
Static Characteristics
Symbol
Test Conditions
Value
Unit
VTM
Component IT = 24A; tp = 380 µs
TJ = 25°C
MAX.
1.6
10
V
I
DRM / IRRM
VDRM = VRRM
TJ = 125°C
MAX.
500
2000
μA
TJ = 150°C
Thermal Resistances
Symbol
Parameter
Value
Unit
SJxx12Lx
2.4
1.1
SJxx12Rx
SJxx12Nx
Junction to case (AC)
°C/W
Rθ(JC)
SJxx12Dx
SJxx12Vx
1.4
Note: xx=voltage/10, x=sensitivity
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
1.8
1.6
2.0
SJxx12Lx
SJxx12Rx
SJxx12Nx
1.6
1.4
SJxx12Dx
SJxx12Vx
1.2
1.2
1.0
SJxx12Dx
SJxx12Vx
SJxx12Lx
0.8
0.6
0.4
0.2
0.0
SJxx12Rx
SJxx12Nx
0.8
0.4
0.0
-40
-15
10
35
60
85
110
135
150
-40
-15
10
35
60
85
110
135 150
JunctionTemperature (TJ) -- (ºC)
JunctionTemperature (TJ) -- (°C)
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
1
12 Amps High Junction Temperature SCRs
Figure 3: Normalized DC Holding Current
Figure 4: On-State Current vs. On-State
Voltage (Typical)
vs. JunctionTemperature
2.0
1.6
1.2
0.8
0.4
0.0
40
35
SJxx12Lx
SJxx12Rx
SJxx12Nx
SJxx12Dx
SJxx12Vx
30
25
20
15
10
SJxx12Dx
SJxx12Vx
SJxx12Lx
SJxx12Rx
SJxx12Nx
5
0
-40
-15
10
35
60
85
110
135 150
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
JunctionTemperature (TJ) -- (°C)
Instantaneous On-stateVoltage (vT) –Volts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
15
12
9
150
SJxx12Rx
SJxx12Nx
140
130
SJxx12Lx
120
SJxx12Dx
SJxx12Vx
110
100
90
6
3
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
80
0
2
4
6
8
10
12
14
0
RMS On-State Current [IT(RMS)] - Amps
0
2
4
6
10
12
RMS On-State Current [I8T(RMS)] - (Amps)
Figure 7: Maximum Allowable CaseTemperature
vs. Average On-State Current
Figure 8: Peak Capacitor Discharge Current
1000
150
SJxx12Rx
SJxx12Nx
140
130
120
SJxx12Lx
SJxx12Dx
SJxx12Vx
100
110
100
90
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
ITRM
SJxx16Dx
SJxx16Vx
80
0
1
2
3
4
5
6
7
8
tW
Average On-State Current [IT(AVE)] - Amps
10
0 5.
5.0
25.0
50.0
Pulse Current Duration (tw) - ms
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Figure 9: Peak Capacitor Discharge Current Derating
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
CaseTemperature (TC) - ºC
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
100
10
1
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
10
100
1000
Surge Current Duration - Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
150°C
tP
TP
-Temperature Min (Ts(min)
)
Ramp-up
Pre Heat -Temperature Max (Ts(max)
)
200°C
TL
TS(max)
-Time (min to max) (ts)
60 – 180 secs
tL
Average ramp up rate (LiquidusTemp)
(TL) to peak
Ramp-down
5°C/second max
Preheat
TS(min)
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
tS
-Temperature (TL) (Liquidus)
Reflow
-Time (tL)
60 – 150 seconds
260+0/-5 °C
25
time to peak temperature
PeakTemperature (TP)
Time
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12AmpsHighJunctionTemperatureSCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 150°C for 1008 hours
UL recognized compound meeting
flammability rating V-0.
MIL-STD-750, M-1051,
100 cycles; -55°C to +150°C;
15-min dwell-time
Temperature Cycling
Lead Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 160V - DC: 85°C;
85% rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Moisture Sensitivity
Level
Level 1, JEDEC-J-STD-020D
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO- 263AB (N-package) — D2-Pak Surface Mount
T
C MEASURING POINT
C
2
AREA: 0.11 in
Inches
Millimeters
B
V
Dimension
E
ANODE
Min
Max
Min
Max
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
9.14
9.65
4.52
0.64
1.14
9.40
10.67
4.78
0.89
1.52
7. 01
.276
A
S
W
U
J
K
GATE
CATHODE
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
8.13
.320
G
H
D
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
F
11.68
.460
2.16
.085
K
7. 01
7. 01
S
.276
.276
16.89
.665
V
8.89
.350
1.40
.055
U
W
0.25
1.78
3.81
.150
2.03
.080
6.60
.260
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole
TC MEASURING POINT
AREA: 0.040 IN2
Inches
Typ
Millimeters
Typ
Dimension
Min
Max
0.050
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.052
0.044
0.044
0.084
Min
1.02
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
1.06
0.86
0.86
1.86
Max
1.27
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
1.32
1.11
E
H
J
5.28
.208
Anode
A
D
A
B
C
D
E
F
0.040
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.042
0.034
0.034
0.074
0.044
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.040
0.020
0.047
0.039
0.039
0.079
1.11
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
1.01
5.34
.210
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode
L
F
0.52
1.20
Anode
GATE
G
P
Q
R
S
I
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Anode
5.28
.208
TC MEASURING POINT
Inches
Typ
Millimeters
Typ
D
Dimension
Min
0.040
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.000
0.021
0°
Max
0.050
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.004
0.027
5°
Min
1.02
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
0.00
0.53
0°
Max
1.27
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
0.10
0.69
5°
A
B
6.71
.264
5.34
.210
A
B
C
D
E
F
0.043
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.040
0.020
0.000
0.026
0°
1.09
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
1.02
GATE
F
AREA: 0.040 IN2
Cathode
Anode
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
0.51
0.00
0.67
0°
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
Product Selector
Voltage
Part Number
Gate Sensitivity
600V
Type
Package
400V
X
SJxx12L
SJxx12R
SJxx12N
SJxx12V
X
X
X
X
X
X
X
X
X
X
X
X
X
20mA
20mA
20mA
20mA
20mA
6mA
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220L
TO-220R
TO-263
TO-251
TO-252
TO-220L
TO-220R
TO-263
TO-251
TO-252
TO-220L
TO-220R
TO-263
X
X
X
SJxx12D
SJxx12L1
SJxx12R1
SJxx12N1
SJxx12V1
SJxx12D1
SJxx12L2
SJxx12R2
X
X
X
6mA
X
6mA
X
6mA
X
6mA
X
10mA
10mA
10mA
X
SJxx12N2
X
Note: xx = Voltage/10
Packing Options
Part Number
SJxx12LxTP
Marking
SJxx12Ly
SJxx12Ry
SJxx12Ny
SJxx12Ny
Weight
2.2g
Packing Mode
Base Quantity
500 (50 per tube)
500 (50 per tube)
500 (50 per tube)
500
Tube
Tube
SJxx12RxTP
2.2g
SJxx12NxTP
1.6g
Tube
SJxx12NxRP
1.6g
Embossed Carrier
Tube
SJxx12DxTP
SJxx12Dx
SJxx12Dx
SJxx12Vx
0.3 g
0.3 g
0.4 g
750 (75 per tube)
2500
SJxx12DxRP
Embossed Carrier
Tube
SJxx12VxTP
750 (75 per tube)
Note: xx=voltage/10, x=sensitivity
Part Numbering System
Part Marking System
TO-220 AB - (L and R Package)
TO-263 AB - (N Package)
SJ
TP
60 12 R 1
TO-251 (V/I-Pak)
TO-252 (D-Pak)
PACKING TYPE
COMPONENT TYPE
SJ: high temperature SCR
TP:Tube Pack
RP: Reel Pack
SJ6012V
SENSITIVITY & TYPE
[bank]:20mA
1: 6mA
VOLTAGE RATING
Sxx16R
SJ6012L1
40: 400V
60: 600V
YM
2:10mA
®
PACKAGE TYPE
CURRENT RATING
L: TO-220 Isolated
R: TO-220 Non-Isolated
N: TO-263 (D2-Pak)
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
YMLDD
®
12: 12A
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
Thyristors
12 Amps High Junction Temperature SCRs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
(1.5)
DIA
Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.157
(4.0)
0.059
Dia
(1.5)
Gate
Cathode
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
SJxx12xx Series
©2018 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/10/18
相关型号：
©2020 ICPDF网 联系我们和版权申明