L135-O615003500000_技术文档

IllumInatIon

luXeon 3535l

cꢀꢁꢀꢂ liꢃꢄ

Color LEDs that deliver the perfect amount

of color you need. No More. No less.

The LUXEON 3535L Color Line enables a new era of color lighting. This

robust color line provides high performance and is targeted at cost

eﬀective designs. Complemented by a broad range of white oﬀerings, the

LUXEON 3535L Color Line enables RGBW applications. This product line

extends the comprehensive LUXEON Color Family.

Features and BeneFIts

PrImary aPPlIcatIons

Industry standard package enables drop-in replacement for

existing 3535 packages

Architectural & Entertainment

Lamps

Single die and single source architecture for optical control

Common focal length with LUXEON Rebel and LUXEON Z Color LEDs

Full color palette for a wider spectrum range

– Color Tunable Illumination

Specialty Lighting

– Emergency Vehicle

– Signage

No. E507562

Table of Contents

General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2

Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3

Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5

Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product Bin and Labeling Deﬁnitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10

Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Peak Wavelength Bins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Color Bin Deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 14

Reﬂow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 15

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 16

Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

i

General Product Information

Product Test Conditions

LUXEON 3535L Color Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, T_j, of 25ºC.

Part Number Nomenclature

Part numbers for LUXEON 3535L Color Line follow the convention below:

L 1 3 5 – A A A A 0 0 3 5 0 0 0 0 B

Where:

A A A A – designates color (R625=Red, O615=Red Orange, A589=PC Amber, L567=Lime, G525=Green, B475=Blue,

U450=Royal Blue)

B

– designates a Lumileds internal code (either 0 or 1)

Therefore, the following part number is used for a Red LUXEON 3535L:

L 1 3 5 – R 6 2 5 0 0 3 5 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L

Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the

following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or

polybrominated diphenyl ethers (PBDE).

2

Performance Characteristics

Product Selection Guide

Table 1ꢀ Product performance of LUXEON 3535L Color Line at 100mA, T_j=25ºCꢀ

domInant ꢀꢂ

lumInous FluX ^[2](ꢁꢅ) ꢀꢂ

PeaK WaVelenGtH ^[1](ꢃꢅ)

radIometrIc PoWer ^[3](ꢅW)

Part

color

numBer

mInImum

maXImum

mInImum

10.0

tyPIcal

13.5

Red

Red-Orange

PC Amber

Lime

Green

Blue

620

610

–

630

620

–

L135-R625003500000

L135-O615003500000

L135-A589003500000

L135-L567003500000

L135-G525003500000

L135-B475003500000

L135-U450003500000

13.0

15.5

24.0

35.0

–

44.0

56.0

520

469

440

540

480

455

21.0

35.0

8.2

11.0

Royal Blue

Notes for Table 1:

130

155

1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements. PC Amber and Lime are binned by chromaticity coordinates. Royal Blue is binned by peak wavelength.

All other colors are binned by dominant wavelength.

2. Lumileds maintains a tolerance of ±7.5% on luminous ﬂux measurements.

3. Royal Blue is binned by radiometric power. All other colors are binned by luminous ﬂux.

Optical Characteristics

Table 2ꢀ Optical characteristics for LUXEON 3535L Color Line at 100mA, T_j=25ºCꢀ

tyPIcal sPectral

HalF-WIdtH ^[1]

(ꢃꢅ)

tyPIcal temPerature

coeFFIcIent oF domInant

WaVelenGtH (ꢃꢅ/°c)

tyPIcal total

tyPIcal

color

Part numBer

Included anGle ^[2]VIeWInG anGle ^[3]

Red

Red-Orange

PC Amber

Lime

L135-R625003500000

L135-O615003500000

L135-A589003500000

L135-L567003500000

L135-G525003500000

L135-B475003500000

L135-U450003500000

20

0.04

0.07

0.01

0.04

140°

115°

95

110

35

Green

Blue

25

Royal Blue

25

Notes for Table 2:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity

2. Total angle at which 90% of total luminous ﬂux is captured.

3. Viewing angle is the oﬀ axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

3

Electrical and Thermal Characteristics

Table 3ꢀ Electrical and thermal characteristics for LUXEON 3535L Color Line at 100mA, T_j=25ºCꢀ

ForWard VoltaGe ^[1](V)

tyPIcal temPerature

coeFFIcIent oF ForWard

VoltaGe ^[2](ꢅV/°c)

tyPIcal tHermal

resIstance — JunctIon

to solder Pad (°c/W)

color

Part numBer

mInImum tyPIcal maXImum

Red

Red-Orange

PC Amber

Lime

L135-R625003500000

L135-O615003500000

L135-A589003500000

L135-L567003500000

L135-G525003500000

L135-B475003500000

L135-U450003500000

1.75

2.80

2.50

2.10

3.05

3.20

3.00

3.05

2.50

3.50

-2.0

-1.7

-3.0

-2.5

20

25

42

35

Green

Blue

Royal Blue

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4ꢀ Absolute maximum ratings for LUXEON 3535L Color Lineꢀ

red and

Pc amBer

and lIme

Blue and

royal Blue

Parameter

red-oranGe

Green

DC Forward Current^[1,2]

Peak Pulsed Forward Current^[1,3]

LED Junction Temperature^[1](DC & Pulse)

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)

Operating Case Temperature ^[1]

LED Storage Temperature

125mA

300mA

200mA

300mA

115°C

Class 2

95°C

200mA

480mA

125°C

Class 2

95°C

240mA

125°C

Class 2

105°C

-40°C to 105°C

-40°C to 95°C

Soldering Temperature

JEDEC 020c 260°C

Allowable Reﬂow Cycles

3

Reverse Voltage (V_reverse

)

LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

4

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON 3535L Color Line at 100mA, T_j=25°Cꢀ

Light Output Characteristics

Figure 2aꢀ Typical normalized light output vsꢀ junction temperature for LUXEON 3535L Red, Red-Orange,

PC Amber, Lime, Blue, Green at 100mAꢀ

5

Figure 2bꢀ Typical normalized light output vsꢀ junction temperature for LUXEON 3535L Royal Blue at 100mAꢀ

Figure 3a. Typical normalized light output vs. forward current for LUXEON 3535L PC Amber, Lime and Blue at T_j=25°Cꢀ

6

Figure 3b. Typical normalized light output vs. forward current for LUXEON 3535L Red, Red-Orange, Green at T_j=25°Cꢀ

Figure 3c. Typical normalized light output vs. forward current for LUXEON 3535L Royal Blue at T_j=25°Cꢀ

7

Forward Current Characteristics

Figure 4. Typical forward current vs. forward voltage for LUXEON 3535L Color Line at T_j=25°Cꢀ

8

Radiation Pattern Characteristics

Figure 5ꢀ Typical radiation pattern for LUXEON 3535L Color Line at 100mA, T_j=25°Cꢀ

Figure 6ꢀ Typical polar radiation pattern for LUXEON 3535L Color Line at 100mA, T_j=25°Cꢀ

9

Product Bin and Labeling Deﬁnitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ﬂux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the

format below:

A B C

Where:

A

B

C

–

designates luminous ﬂux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)

designates radiometric bin (example: B, C, D, E, F, G, H) or dominant/peak wavelength bin (example: 1, 2, 3, 4, 5)

designates forward voltage bin (example: C=2.00 to 2.25V, G=3.00 to 3.25V)

Therefore, a Red-Orange LUXEON 3535L LED with a lumen range of 15.0 to 17.0, dominant wavelength range of 610 to 620nm

and a forward voltage range of 2.00 to 2.25V has the following CAT code:

E 2 C

LUXEON 3535L PC Amber and Lime LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A

–

designates luminous ﬂux bin (example: L=32.0 to 36.0 lumens, R=48.0 to 52.0 lumens)

designates color bin (example: A0, L0 or L1)

B C

D

designates forward voltage bin (example: W=3.00 to 3.10V, Z=3.30 to 3.50V)

Therefore, a Lime LUXEON 3535L LED with a lumen range of 32.0 to 36.0, color bin of L0 and a forward voltage range of 3.00 to

3.10V has the following CAT code:

L L 0 W

10

Luminous Flux Bins

Table 5 lists the standard luminous ﬂux bins for LUXEON 3535L Color Line emitters. Although several bins are outlined, product

availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ﬂux bin deﬁnitions for LUXEON 3535L Color Line, at T_j=25°Cꢀ

lumInous FluX ^[1](ꢁꢅ)

BIn

mInImum

8.2

maXImum

10.0

11.5

13.0

15.0

17.0

19.0

21.0

24.0

28.0

32.0

36.0

40.0

44.0

48.0

52.0

56.0

60.0

65.0

70.0

A

B

C

D

E

10.0

11.5

13.0

15.0

17.0

19.0

21.0

24.0

28.0

32.0

36.0

40.0

44.0

48.0

52.0

56.0

60.0

65.0

F

G

H

J

K

L

M

P

Q

R

S

T

V

W

Notes for Table 5:

1. Lumileds maintains a tolerance of ±7.5% on luminous ﬂux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin deﬁnitions for LUXEON 3535L Color Line.

radIometrIc PoWer ^[1](ꢅW)

BIn

mInImum

maXImum

B

C

D

E

130

140

150

160

170

180

190

140

150

160

170

180

190

200

F

G

H

Notes for Table 6:

1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.

11

Dominant Wavelength Bins

Table 7. Dominant wavelength bin deﬁnitions for LUXEON 3535L Red, Red-Orange, Green and Blue.

domInant WaVelenGtH ^[1](ꢃꢅ)

color

Part numBer

BIn

mInImum

maXImum

630

Red

L135-R625003500000

L135-O615003500000

4

2

1

2

3

4

3

4

620

610

520

525

530

535

469

475

Red-Orange

620

525

530

Green

L135-G525003500000

L135-B475003500000

535

540

475

Blue

480

Notes for Table 7:

1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements.

Peak Wavelength Bins

Table 8. Peak wavelength bin deﬁnitions for LUXEON 3535L Royal Blue.

PeaK WaVelenGtH ^[1](ꢃꢅ)

color

Part numBer

BIn

mInImum

440

maXImum

445

3

4

5

Royal Blue

L135-U450003500000

445

450

455

Notes for Table 8:

1. Lumileds maintains a tolerance of ±0.5nm on peak wavelength measurements.

12

Color Bin Deﬁnitions

0.45ꢀ

0.445ꢀ

0.44ꢀ

0.6

0.58

0.56

0.54

0.52

0.5

Bin L1

Bin L0

BinꢀA0ꢀ

0.435ꢀ

0.43ꢀ

0.425ꢀ

0.42ꢀ

0.415ꢀ

0.41ꢀ

0.405ꢀ

0.4ꢀ

0.48

0.54ꢀ

0.55ꢀ

0.56ꢀ

0.57ꢀ

0.58ꢀ

0.59ꢀ

0.35

0.37

0.39

0.41

0.43

0.45

0.47

CIEꢀ1931ꢀxꢀ

CIE 1931 x

Figure 7. Color Bin Structure for

LUXEON 3535L PC Amber for Table 9ꢀ

Figure 8. Color Bin Structure for

LUXEON 3535L Lime for Table 9ꢀ

Table 9. Color bin deﬁnitions for LUXEON 3535L PC Amber and Lime.

color

Part numBer

BIn

x

ꢆ

0.5622

0.5843

0.5705

0.5499

0.3927

0.4287

0.4327

0.3972

0.3773

0.3927

0.4287

0.4150

0.4372

0.4152

0.4111

0.4249

0.5007

0.5697

0.5655

0.4986

0.5076

0.5007

0.5697

0.5833

PC Amber

L135-A589003500000

A0

L0

L1

Lime

L135-L567003500000

Notes for Table 9:

1. Lumileds maintains a tolerance of ±0.01 on x and y coordinates in the CIE 1931 color space.

13

Forward Voltage Bins

Table 10a. Forward voltage bin deﬁnitions for LUXEON 3535L Red, Red-Orange, Green, Blue and Royal Blue.

ForWard VoltaGe ^[1](V_f)

BIn

mInImum

1.50

maXImum

A

B

C

D

E

1.75

2.00

2.25

2.50

2.75

3.00

3.25

3.50

1.75

2.00

2.25

2.50

F

2.75

G

H

3.00

3.25

Table 10b. Forward voltage bin deﬁnitions for LUXEON 3535L PC Amber and Lime.

ForWard VoltaGe ^[1](V_f)

BIn

mInImum

2.80

maXImum

2.90

T

V

2.90

3.00

W

X

3.00

3.10

3.20

Y

3.20

3.30

Z

3.30

3.50

Notes for Tables 10a and 10b:

1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

Mechanical Dimensions

Figure 9ꢀ Mechanical dimensions for LUXEON 3535L Color Lineꢀ

Notes for Figure 9:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Tolerance of ±0.1mm.

14

Reﬂow Soldering Guidelines

Figure 10. Visualization of the acceptable reﬂow temperature proﬁle as speciﬁed in Table 11.

Table 11. Reﬂow proﬁle characteristics for LUXEON 3535L Color Line.

ProFIle Feature

lead-Free assemBly

Preheat Minimum Temperature (T_smin

)

150°C

200°C

Preheat Maximum Temperature (T_smax

)

Preheat Time (t_sminto t_smax

)

60 to 120 seconds

3°C / second maximum

217°C

Ramp-Up Rate (T_Lto T_p)

Liquidus Temperature (T_L)

Time Maintained Above Temperature T_L(t_L)

Peak / Classiﬁcation Temperature (T_p)

Time Within 5°C of Actual Temperature (t_p)

Ramp-Down Rate (T_pto T_L)

60 to 150 seconds

260°C

20 to 40 seconds

6°C / second maximum

8 minutes maximum

Time 25°C to Peak Temperature

JEDEC Moisture Sensitivity

Table 12ꢀ Moisture sensitivity levels for LUXEON 3535L Color Lineꢀ

Floor lIFe

soaK requIrements standard

leVel

tIme

condItIons

≤30°C / 60% RH

tIme

condItIons

2

1 Year

168 Hours +5 / -0

≤85°C / 60% RH

15

Solder Pad Design

2.60

2.40

0.82 1.02

Solder mask

Stencil

0.65

0.30

0.25

Top copper

Package geometric center

1.93 2.13

1.80

0.50

Figure 11ꢀ Recommended PCB solder pad layout for LUXEON 3535L Color Lineꢀ

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Packaging Information

Pocket Tape Dimensions

Figure 12ꢀ Pocket Tape dimensions for LUXEON 3535L Color Lineꢀ

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Empty components pockets sealed with top cover tape.

16

Reel Dimensions

Figure 13ꢀ Reel dimensions for LUXEON 3535L Color Lineꢀ

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Empty component pockets sealed with top cover tape.

4. 329 mm reel — 5000 pieces per reel.

5. Minimum packing quantity is 5000 pieces.

6. The maximum number of consecutive missing LEDs is two.

7. In accordance with EIA-481-1-B speciﬁcation.

17

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry ﬁrsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver diﬀerentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

Neither Lumileds Holding B.V. nor its aﬃliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aﬃliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aﬃliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aﬃliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

DS146 LUXEON 3535L Color Line

Product Datasheet 20210615


型号：	L135-O615003500000
厂家：	LUMILEDS LIGHTING COMPANY
描述：	RED-ORANGE 610NM-620NM
文件：	总19页 (文件大小：1901K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

L135-O615003500000 [LUMILEDS]

相关型号：

L135-O615003500001

L135-R625003500000

L135-R625003500001

L135-U450003500000

L1355

L1360

L1361/1

L138-DG-225-RI

L138-DI-225-RI

L138-FG-225-RC

L138-FI-225-RC

L138-FI-236-RL