L1Q0-407000000ZZZ0 [LUMILEDS]

Standard ceramic 3535 footprint delivering high efficacy at high-drive current;


型号：	L1Q0-407000000ZZZ0
厂家：	LUMILEDS LIGHTING COMPANY
描述：	Standard ceramic 3535 footprint delivering high efficacy at high-drive current
文件：	总18页 (文件大小：1745K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ILLUMINATION

For NEW designs consider

these replacement products:

•LUXEON TX

•LUXEON Z ES

LUXEON Q

Standard ceramic 3535 footprint delivering

high eﬃcacy at high-drive current

LUXEON Q delivers superior performance in a high-power LED that

serves as a drop-in replacement for products that use the standard 3535

surface mount package. LUXEON Q is the ﬁrst high-power LED based

on the Lumileds FlipChip Technology chip-scale package (CSP) device

architecture. LUXEON Q takes advantage of a fully developed ecosystem

for 3535 components, including optics, to speed the time-to-market for

indoor and outdoor luminaires.

FEATURES AND BENEFITS

PRIMARY APPLICATIONS

Industry standard 3535 package for optimization with existing designs

Lumileds FlipChip Technology for industry leading performance

High eﬃcacy at high drive current enables high lumen and lm/$ at high lm/W

Downlights

High Bay & Low Bay

Lamps

3-step MacAdam ellipse color deﬁnition: Freedom from Binning for color

Outdoor

consistency

UL-recognized component [E352519]

Spotlights

RoHS

COMPLIANT

Table of Contents

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Average Lumen Maintenance Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Selection & Optical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Absolute Maximum Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Reﬂow Soldering Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Relative Spectral Distribution vs. Wavelength Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Typical Light Output Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Emitter Pocket Tape Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Luminous Flux and Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

LUXEON Q 3-step and 5-step MacAdam ellipse Color Deﬁnition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

General Information

Product Nomenclature

LUXEON Q emitters are speciﬁed and binned “hot” under conditions comparable to those found in “real-world”

lighting products. The test conditions for LUXEON Q are 350mA DC with junction temperature at 85°C.

The part number designation is explained as follows:

L 1 Q 0 - x x y y 0 0 0 0 0 z z z 0

Where:

—

designates nominal ANSI CCT (27 for 2700K, 30 for 3000K)

zzz

designates minimum CRI performance (70 for 70CRI, 80 for 80CRI)

designates minimum ﬂux performance at standard binning current and temperature (e.g.,

090 for 90 lumens, 110 for 110 lumens, etc). 000 designates full distribution ﬂux performance.

Therefore, 80CRI products tested and binned at 3000K with a 110lm minimum ﬂux at binning current and

temperature will have the part numbering scheme:

L1Q0-3080000001100

Therefore, 70CRI products tested and binned at 5700K with a 130lm minimum ﬂux at binning current and

temperature will have the following part numbering scheme:

L1Q0-5770000001300

Average Lumen Maintenance Characteristics

LUXEON Q products are tested in compliance with LM-80. Please contact your local Lumileds Technical Solutions

Manager for TM-21 extrapolations or other support.

Environmental Compliance

Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Q

is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted material to the

LUXEON Q: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Product Selection & Optical Characteristics

Product Selection Guide for LUXEON Q Emitters

Junction Temperature = 85°C

Table 1.

Typical Performance Characteristics at 350mA, 700mA, and 1000mA for LUXEON Q, Junction Temperature = 85°C

Luminous Flux

(Lm) Min

Typical Luminous Flux

(Lm)

Typical Forward

Voltage (V_f)

Typical Eﬃcacy

(Lm/W)

Nominal

ANSI CCT

CRI

Part Number

350

700

1000

350

700

1000

350

700

1000

350mA

L1Q0-278000000zzz0

L1Q0-308000000zzz0

L1Q0-358000000zzz0

L1Q0-407000000zzz0

L1Q0-507000000zzz0

L1Q0-577000000zzz0

Notes for Table 1:

2700K

3000K

3500K

4000K

5000K

5700K

110

113

115

117

199

204

209

236

237

241

261

270

278

313

2.81

2.93

2.99

115

102

115

116

118

2.81

2.99

117

119

134

135

136

132

133

134

104

105

106

315

320

1. Lumileds maintains a tolerance of 6.5ꢀ on luminous ﬂux and 2 on CRI measurements.

Optical Characteristics

LUXEON Q at Test Current ^[1], Junction Temperature = 85°C

Table 2.

Typical Total Included

Angle ^[2]

Typical

Color Temperature

CCT

Typical Viewing Angle^[3]

(degrees)

Nominal

ANSI CCT

Part

Number

(degrees)

θ_0.90V

2θ 1/2

2700K

3000K

3500K

4000K

5000K

5700K

L1Q0-278000000zzz0

L1Q0-308000000zzz0

L1Q0-358000000zzz0

L1Q0-407000000zzz0

L1Q0-507500000zzz0

L1Q0-577000000zzz0

2725K

3045K

3465K

3985K

5028K

5665K

160

135

Notes for Table 2:

1. Test current is 350mA D.C. for all L1Q0-xxyy00000zzz0 emitters.

2. Total angle at which 90ꢀ of total luminous ﬂux is captured.

3. Viewing angle is the oﬀ axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.

Electrical Characteristics

Electrical Characteristics at test current for LUXEON Q

Junction Temperature = 85°C

Table 3.

Forward Voltage V_f(V)^[1]

Typical Temperature

Typical Thermal Resistance

Junction to Thermal Pad

(°C/W)

Coeﬃcient

of Forward Voltage^[2]

(mV/°C)

Nominal

ANSI CCT

Minimum

Maximum

Rθ _J-C

DV_F/ DT

2700K

3000K

3500K

4000K

5000K

5700K

2.50

3.25

-1.6

Notes for Table 3:

1. Lumileds maintains a tolerance of 0.06V on forward voltage measurements.

2. Measured between T = 25°C and T = 110°C at I_f= 350mA.

Absolute Maximum Ratings

Table 4.

Parameter

LUXEON Q

DC Forward Current (mA) ^{[1] [2]}

Peak Pulsed Forward Current (mA) ^{[1] [3]}

ESD Sensitivity

1050

1200

< 8000V Human Body Model (HBM) Class 3A JESD22-A114-E

LED Junction Temperature^[1]

Operating Case Temperature at 700mA

Storage Temperature

135°C

-40°C - 135°C

Soldering Temperature

JEDEC 020c 260°C

Allowable Reﬂow Cycles

Reverse Voltage (Vr) ^{[4] [5]}

LUXEON Q LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application

Brief AB118 (not available yet).

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies

≥ 100 Hz and amplitude ≤ 150mA are acceptable, assuming the average current throughout each cycle does not exceed 1050mA.

3. Pulsed operation with a peak drive current of 1200mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50ꢀ.

4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse

voltage does not exceed 5V and the reverse current is less than 200μA.

5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

JEDEC Moisture Sensitivity

Table 5.

Soak Requirements

Standard

Floor Life

Level

Time

unlimited

Conditions

Time

Conditions

30°C /

85% RH

168h

+ 5 / - 0

85°C / 85%

Reﬂow Soldering Characteristics

Figure 1. Temperature Proﬁle for Table 6.

Table 6.

Proﬁle Feature

Lead Free Assembly

3°C / second max

150°C

Average Ramp-Up Rate ( Ts_maxto T_p)

Preheat Temperature Min ( Ts_min

Preheat Temperature Max ( Ts_max

Preheat Time ( ts_minto ts_max

)

200°C

)

60 - 180 seconds

217°C

Time Maintained Above Temperature T_L

Time Maintained Above Time ( t_L)

Peak / Classiﬁcation Temperature ( T_P)

Time Within 5°C of Actual Peak Temperature ( t_P)

Ramp-Down Rate

60 - 150 seconds

260°C

20 - 40 seconds

6°C / second max

8 minutes max

Time 25°C to Peak Temperature

Mechanical Dimensions

Figure 2. Package outline drawing for LUXEON Q.

Notes for Figure 2:

1. Drawings not to scale.

2. All dimensions are in millimeters.

3. The thermal pad is electrically isolated from the anode and cathode contact pads.

4. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device.

5. Tolerances (UNLESS OTHERWISE SPECIFIED)

LINEAR: ANGULAR:

XX. 0.125 mm XX 1°

Solder Pad Design

Figure 3. Solder pad layout.

Notes for Figure 3:

•

The photograph shows the recommended LUXEON Q layout on Printed Circuit Board (PCB).

For more information on assembly and layout, please refer to Application Brief 118 (AB118).

The .dwg ﬁles are available at www.lumileds.com.

Relative Spectral Distribution vs. Wavelength Characteristics

Relative Spectra at Test Current, Junction Temperature = 85°C

Figure 4. Color Spectrum of L1Q0-xx8000000zzz0.

Figure 5. Color Spectrum of L1Q0-xx7000000zzz0.

Typical Light Output Characteristics

Relative Light Output vs. Junction Temperature, Test Current = 350mA

Figure 6. Relative light output vs. junction temperature, L1Q0-xxyy00000zzz0.

Relative Light Output vs. Forward Current, Junction Temperature = 85°C

Figure 7. Typical relative luminous ﬂux vs. forward current, L1Q0-xxyy00000zzz0.

Typical Forward Current Characteristics

Forward Current vs. Forward Voltage

Junction Temperature = 85°C

Figure 8. Typical forward current vs. forward voltage, L1Q0-xxyy00000zzz0.

Typical Radiation Patterns

Typical Spatial Radiation Pattern

Figure 9. Typical representative spatial radiation pattern for L1Q0-xxyy00000zzz0.

Typical Polar Radiation Pattern

Figure 10. Typical representative polar radiation pattern for L1Q0-xxyy00000zzz0.

Emitter Pocket Tape Packaging

Figure 11. Emitter pocket tape packaging.

Emitter Reel Packaging

Figure 12. Emitter reel packaging.

Product Binning and Labeling

Purpose of Product Binning

In the manufacturing of semiconductor products, there are variations in performance around the average values

given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ﬂux and forward

voltage (V_f). Color is oﬀered in a single 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT

color bins. For additional information please review the MacAdam ellipse technical deﬁnition section.

Decoding Product Bin Labeling

LUXEON Q emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters

packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.

Reels of LUXEON Q emitters are labeled with a four digit alphanumeric CAT code following the format below:

ABCD

A = Flux/Radiometric power bin (D, E, etc.)

B, C = Color bin (30, 3U, 3L, 5A, 5B, 5C, 5D etc.)

D = V_Fbin (Q, R, S)

Luminous Flux and Forward Voltage Bins

Table 7 lists the standard photometric luminous ﬂux bins for LUXEON Q emitters (tested and binned at 350mA and

T_j= 85°C). Although several bins are outlined, product availability in a particular bin varies by production run and by

product performance. Not all bins are available in all colors.

Table 7. Flux Bins

Minimum Photometric Flux

(Lm)

Maximum Photometric Flux

(Lm)

Bin Code

100

110

100

110

120

130

140

150

160

170

120

130

140

150

160

Table 8 lists minimum and maximum V_fbin values per emitter. Although several bins are outlined, product availability

in a particular bin varies by production run and by product performance.

Table 8. V_fBins

Minimum Forward Voltage

(V)

Maximum Forward Voltage

(V)

Bin Code

2.50

2.75

3.00

2.75

3.00

3.25

LUXEON Q 3-step and 5-step MacAdam ellipse Color

Deﬁnition

Note: Color bin space

illustration for 2700K,

3000K, and 3500K. For CCTs

4000K and above the ellipse

centers are all above the

blackbody line.

ANSI C78.377-2008

3-step MacAdam ellipse

5-step MacAdam ellipse

BBL

"Quadrant" lines

Color Space Deﬁnition for Above and Below Blackbody

Parameter Deﬁnition of MacAdam ellipse

Table 9. LUXEON Q Product Characteristics for 3-step MacAdam ellipse

Ellipse

Rotation

Angle

Part

Number

Nominal

ANSI CCT

Center Point

(cx, cy)

Major Axis,

Minor Axis,

Color Space

L1Q0-278000000zzz0

L1Q0-308000000zzz0

L1Q0-358000000zzz0

L1Q0-407000000zzz0

L1Q0-507000000zzz0

L1Q0-577000000zzz0

2700K

3000K

3500K

4000K

5000K

5700K

Single 3-step MacAdam ellipse

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3553)

(0.3287, 0.3417)

0.00810

0.00834

0.00927

0.00939

0.00822

0.00745

0.00420

0.00408

0.00414

0.00402

0.00354

0.00319

53.7

53.2

54.0

53.7

59.6

59.1

Min 80CRI 3-step color bins available above (3U) and below (3L) the blackbody line. Min 70CRI 3-step is not divided into bins above and below the blackbody line and is deﬁned as bin 30.

Table 10. LUXEON Q Product Characteristics for 5-step MacAdam ellipse

Ellipse

Part

Number

Nominal

ANSI CCT

Center Point

(cx, cy)

Major Axis,

Minor Axis,

Color Space

Rotation

Angle

L1Q0-278000000zzz0

L1Q0-308000000zzz0

L1Q0-358000000zzz0

L1Q0-407000000zzz0

L1Q0-507000000zzz0

L1Q0-577000000zzz0

2700K

3000K

3500K

4000K

5000K

5700K

Single 5-step MacAdam ellipse

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3553)

(0.3287, 0.3417)

0.01350

0.01390

0.01545

0.01565

0.01370

0.01234

0.00700

0.00680

0.00690

0.00670

0.00590

0.00533

53.7

53.2

54.0

53.7

59.6

59.1

Min 70 and min 80CRI 5-step is divided into quadrants (5A, 5B, 5C, and 5D).

Notes for Tables 9 & 10:

1. Lumileds maintains a tester tolerance of 0.005 on x, y color coordinates.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry ﬁrsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver diﬀerentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world safer, better and more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

Neither Lumileds Holding B.V. nor its aﬃliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aﬃliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aﬃliates warrants

or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aﬃliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agree-

ment with the download or use of the provided materials, information and data. A listing of Lumileds product/

patent coverage may be accessed at lumileds.com/patents.

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

DS118 LUXEON Q

Product Datasheet 20180327

L1Q0-407000000ZZZ0 [LUMILEDS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E