CBT-90-RX-L15-BM100 [LUMINUS]
Thermally Enhanced LED Chipset;
| 型号： | CBT-90-RX-L15-BM100 |
| 厂家： | 
Luminus |
| 描述： | Thermally Enhanced LED Chipset |
| 文件： | 总15页 (文件大小：1902K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CBT-90 TE Product Datasheet
CBT-90 TE
Thermally Enhanced
LED Chipset
Features:
• Large, monolithic chip with uniform emitting area of 9 mm2
• Wide color gamut available from Red , Green, Blue single color LEDs. White and UV
CBT-90 LEDs are also available with the same package format
Table of Contents
• Ultra High thermal conductivity package allows operation at up to 27A CW.
Technology Overview . . . . . .2
• High precision LEDs placement on copper core PCB for easier thermal management
and optical integration
Test Specifications . . . . . . . . .2
Ordering Information . . . . . .3
• Unencapsulated die with low profile protective window optimizes optical coupling in
etendue-limited applications
Monochrome Binning
• Environmentally friendly: RoHS and Halogen compliant
Structure . . . . . . . . . . . . . . . . . .4
Monochrome Bin Kits . . . . . .6
Optical and Electrical
Characteristics . . . . . . . . . . . . .6
Angular Distribution and
Spectrum. . . . . . . . . . . . . . . . . .9
Applications
Thermal Resistance . . . . . . 10
Mechanical Dimensions . . 11
Packaging Information . . . 13
Revision History . . . . . . . . . 15
• Fiber-coupled Illumination
• Displays and Signage
• General Illumination
• Spot Lighting
• Architectural and Entertainment
Lighting
• Medical Lighting
• Machine Vision
• Microscopy
• Emergency Vehicle Lighting
• Projection Systems
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
1
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Technology Overview
Luminus LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These
breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.
Luminus LED Technology
Reliability
Luminus’Devices vertical chip LED technology enables large
area LED chips with uniform brightness over the entire LED chip
surface. The optical power and brightness produced by these
large monolithic chips enable solutions which replace arc and
halogen lamps where arrays of traditional high power LEDs
cannot.
Designed from the ground up, Luminus LEDs are one of the
most reliable light sources in the world today. Luminus LEDs
have passed a rigorous suite of environmental and mechanical
stress tests, including mechanical shock, vibration, temperature
cycling and humidity, and have been fully qualified for use in
extreme high power and high current applications. With very
low failure rates and median lifetimes that typically exceed
60,000 hours, Luminus LEDs are ready for even the most
demanding applications.
Packaging Technology
Thermal management is critical in high power LED applications.
With a thermal resistance from junction to heat sink of 0.5º C/W,
Luminus CBT-90 LEDs have the lowest thermal resistance of any
LED on the market. This allows the LED to be driven at higher
current densities while maintaining a low junction temperature,
thereby resulting in brighter solutions and longer lifetimes.
Environmental Benefits
Luminus LEDs help reduce power consumption and the amount
of hazardous waste entering the environment. All LED products
manufactured by Luminus are RoHS compliant and free of
hazardous materials, including lead and mercury.
Understanding Luminus LED Test Specifications
Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.
Testing of Luminus LEDs
Expected flux values in real world operation can be extrapolated
based on the information contained within this product data
sheet.
Luminus core board products are typically measured in such a
way that the characteristics reported agree with how the
devices will actually perform when incorporated into a system.
This measurement is accomplished by mounting the devices on
a 40ºC heat sink and allowing the device to reach thermal
equilibrium while fully powered. Only after the device reaches
equilibrium are the measurements taken. This method of
measurement ensures that Luminus LEDs perform in the field
just as they are specified.
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
2
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
CBT-90 Monochromatic Binning Structure
All CBT-90 monochromatic LEDs are tested for luminous flux/ dominant wavelength and placed into one of the following flux/ wave
length bins. The binning structure is universally applied across each monochromatic color of the CBT-90 product line.
Flux Bins*
Luminous Flux
Bin (FF)
Minumum Flux
(lm) @ 13.5A
Maximum Flux
(lm) @ 13.5A
Min Power
(Watts) @ 13.5A (Watts) @ 13.5A
Max Power
Color
Red
BM
BN
BP
770
970
970
1150
1350
1570
1150
1350
BQ
CK
CM
CN
1,500
2,000
2,300
2,000
2,300
2,600
Green
Blue
G
H
J
8.3
9.1
9.1
10.0
11.0
12.1
10.0
11.0
K
Wavelength Bins
Minumum Wavelength Maximum Wavelength
Color
Wavelength Bin
@ 13.5A
@ 13.5A
R2
R3
R4
R5
R6
611
615
615
619
Red (Dominant WL)
Green (Dominant WL)
Blue (Peak WL)
619
623
623
627
627
631
G2
G3
G4
G5
G6
G7
510
515
520
525
530
535
515
520
525
530
535
540
445
450
455
460
465
445
450
455
460
465
450
455
460
465
470
*Note: Luminus maintains a +/- 6% tolerance on flux measurements.
Luminus Devices, Inc. • T 408.708.7000
•
www.luminus.com
3
PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved
1145 Sonora Court
• Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Ordering Information
Ordering Part Number1,2,3
CBT-90-RX-L15-BM100
CBT-90-G-L11-CK100
CBT-90-B-L11-G100
Color
Red
Description
Red LED™ CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a
copper-core PCB.
Green LED™ CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a
copper-core PCB.
Blue CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a
copper-core PCB.
Green
Blue
Part Number Nomenclature
CBT
90
CC
L##
FF###
Product Family
Chip Area
Color
Package Configuration
Bin Kit1,2,3
L15: 28 mm x 26.75 mm - Common
Cathode Package
L11: 28 mm x 26.75 mm - Common
Anode Package
CBT: Copper-core
PCB, No Encap-
sulation
RX= Red
G= Green
B= Blue
See page 5
for complete bin
definition table
90: 9 mm2
See Mechanical Drawing section
Note 1:
Note 2:
Note 3:
A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable..
Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’discretion
CBT-90-RX-L15-BM100 represents a red CBT-90 Device with a minimum Flux of 770lm and a Dominant Wavelength between 611-631nm
CBT-90-G-L11-CK100 represents a green CBT-90 Device with a minimum flux of 1500lm and a Dominant Wavelength between 510-540nm
CBT-90-B-L11-J100 represents a blue CBT-90 Device with a minimum Power of 10Watts and a Peak Wavelength between 445-470nm
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
4
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
CBT-90 Orderable Bin Kits
Luminous Flux
Color
Red
Wavelength Bins
Kit Number
Min. Flux/
Power
Min. Flux Bin
R2, R3, R4, R5, R6
R3, R4, R5
BM100
BM101
BN100
BN101
BM
BN
770 lm
970 lm
R2, R3, R4, R5, R6
R3,R4,R5
G2, G3, G4, G5, G6, G7
G4, G5, G6
CK100
CK101
CM100
CM101
CK
1,500 lm
2,000 lm
Green
Blue
G2, G3, G4, G5, G6, G7
G4, G5, G6
CM
445,450,455,460,465
450,455,460
G100
G101
H100
H101
J100
J101
G
H
J
8.30 W
9.10 W
10.0 W
445,450,455,460,465
450,455,460
445,450,455,460,465
450,455,460
Luminus Devices, Inc. • T 408.708.7000
•
www.luminus.com
5
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
1145 Sonora Court
• Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Optical & Electrical Characteristics
Typical Device Performance
General Characteristics
Emitting Area
Symbol
Red8
9.0
Green
9.0
Blue
9.0
Unit
mm2
Emitting Area Dimensions
3.0x3.0
3.0x3.0
3.0x3.0
mm x mm
1, 2,3
Characteristics at Recommended Test Drive Current , If
Reference Duty Cycle
100
13.5
100
13.5
100
13.5
500
%
A
Test Peak Drive Current
Peak Luminuous Flux4,5,6
Peak Radiometric Flux4,5,6
typ
typ
typ
IF
Φv
Φr
1,030
2,100
lm
5.3
4.4
10.3
W
Dominant Wavelength4
Peak Wavelength4
FWHM- Spectral bandwidth at 50% of Φv4
typ
typ
typ
λd
λd
620
631
17
527
520
35
460
456
21
nm
nm
nm
typ
typ
x
y
.694
.306
2
.173
.712
2.9
.146
.035
2.9
Chromaticity Coordinates 7
Forward Voltage
min
typ
VF min
VF
V
V
V
Ω
2.8
4.5
3.5
max
typ
VF max
Ωdyn
3.8
5.5
4.8
Dynamic Resistance
0.03
0.05
0.02
Device Thermal Characteristics
Thermal Coefficient of Photometric Flux
Thermal Coefficient of Radiometric Flux
typ
typ
-1
-0.2
-0.2
-0
% / oC
% / oC
-0.7
-0.2
Forward Voltage Temperature
Coefficient
typ
-1.6
-2
-3
mV/ oC
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
6
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Optical & Electrical Characteristics
Absolute Maximum Ratings
Symbol
Red
0.2
27
Green
0.2
Blue
0.2
Unit
A
Absolute Minimum Current (CW or Pulsed)8,9
Absolute Maximum Current (CW) 10
27
27
A
Absolute Maximum Surge Current 10,
(Frequency > 240 Hz, duty cycle =10%, t=1ms)
31.5
31.5
31.5
A
Absolute Maximum Junction Temperature 10
Tjmax
125
150
150
ºC
ºC
Storage Temperature Range
-40/+100
-40/+100
-40/+100
Note 1: All ratings are based on operation with a constant heat sink temperature Ths =40ºC. See Thermal Resistance section for Ths definition.
Note 2: CBT-90 RGB devices can be driven at currents ranging from 200mA to 27A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle
should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements.I n pulsed operation, rise
time from 10-90% of forward current should be larger than 0.5 microseconds.
Note 3: Tested at Current Density of 1.5 A/mm2.
Note 4: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 13.5 A.
Note 5: Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level. For specific
minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus.
Note 6: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
Note 7: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1.
Note 8: For reference only.
Note 9: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information.
Note 10: CBT-90 RGB LEDs are designed for operation to an absolute maximum current and temperature as specified above. Product lifetime data is specified
at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents or temperatures will result in a reduction of
device life ime compared to recommended conditions. Refer to the lifetime derating curves for further information.
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
7
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Optical & Electrical Characteristics
Relative Output Flux vs. Forward Current1
Forward Current vs. Forward Voltage
Relative Output Flux vs. Forward Current1
Forward Current vs. Forward Voltage
Relative Output Flux vs. Forward Current1
Forward Current vs. Forward Voltage
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
8
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Light Output and Spectral Characteristics Over Heat Sink Temperature
Angular Intensity Distribution (Typical)
1.2
1.2
1
1.2
1
Red
Green
Blue
Cosine function
Cosine function
Cosine function
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
-90
-70
-50
-30
-10
10
30
50
70
90
-90
-70
-50
-30
-10
10
30
50
70
90
-90
-70
-50
-30
-10
10
30
50
70
90
Angle [degrees]
Angle [degrees]
Angle [degrees]
Typical Spectrum1
Note 1: Typical spectrum at current density of 0.35 A/mm2 in continuous operation.
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
9
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Thermal Resistance
Typical Thermal Resistance
1
Rθj-b
0.5 ºC/W
0.1 ºC/W
0.6 ºC/W
0.5 ºC/W
1
Rθb-hs
2
Rθj-hs
1
Rθj-ref
Note 1: Thermal resistance values are based on
FEA model results correlated to
measured Rθj-hs data.
Note 2: Thermal resistance is measured using
eGraf 1205 thermal interface material.
Thermistor Information
Electrical Pinout
The thermistor used in CBT-90 LEDs mounted on core-boards is
from Murata Manufacturing Co. The global part number is
NCP15XH103J03RC. Please see http://www.murata.com/ for details
on calculating thermistor temperature.
125
100
75
50
25
0
0
5
10
15
20
Resistance (K ohm)
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
10
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Mechanical Dimensions – CBT-90-RX Common Cathode LED
',0(16,216ꢀ,1ꢀ0,//,0(7(56
ꢀꢅꢂꢃꢄꢄꢃꢆꢄꢀ
ꢀꢁꢂꢃꢄꢄꢀ
ꢆꢃꢄ
',(ꢀ(0,77,1*
$5($
(
ꢀꢆꢃꢇꢆꢃꢁꢄꢀ
ꢀꢅ; ꢅꢃꢊꢃꢁꢀ
&
ꢀꢎ$ꢎꢀ
ꢀꢎ%ꢎꢀ
ꢀꢎ&ꢎꢀ
ꢀꢉꢃꢉꢄꢀ
ꢀꢁꢁꢃꢄꢄꢀ
ꢆꢃꢄ
ꢀꢅꢈꢃꢍꢉꢃꢆꢄꢀ
',(ꢀ(0,77,1*
$5($
ꢀꢇꢅꢀ
ꢀꢅ; ꢆꢃꢄ
ꢋ
ꢃꢁ
ꢀ
ꢌ
ꢀ
ꢃꢄ
ꢀꢉꢃꢍꢀ
'(7$,/ꢀ&ꢀ
(
6(&7,21ꢀ(ꢌ(
ꢀꢅ;ꢀꢈꢃꢆꢉꢀ
ꢀꢁꢄꢃꢅꢀ
',0(16,21ꢀ
1$0(
120,1$/ꢀ
',0(16,21
'(6&5,37,21
72/(5$1&(
ꢎ$ꢎ
ꢎ%ꢎ
723ꢀ2)ꢀ0(7$/ꢀ68%675$7(ꢀ72ꢀ723ꢀ2)ꢀ:,1'2:
723ꢀ2)ꢀ',(ꢀ(0,77,1*ꢀ$5($ꢀ72ꢀ723ꢀ2)ꢀ:,1'2:
723ꢀ2)ꢀ0(7$/ꢀ68%675$7(ꢀ72ꢀ723ꢀ2)ꢀ',(ꢀ(0,77,1*ꢀ$5($
ꢃꢂꢂ
ꢃꢈꢉ
ꢃꢅꢆ
ꢃꢁꢆ
ꢃꢁꢁ
ꢎ&ꢎ
ꢃꢄꢅ
':*ꢌꢄꢄꢅꢉꢄꢈ
Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C
Thermistor Connector: MOLEX P/N 53780-0270 or GCT P/N WTB08-021S-F.
Recommended Female: MOLEX P/N 51146-0200, GCT P/N WTB06-021S-F or equivalent
For detailed drawing please refer to DWG-002506 document
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
11
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Mechanical Dimensions – CBT-90-G,B Common Anode LED
*5((1ꢃ/('ꢃ'(9,&(
%/8(ꢃ/('ꢃ'(9,&(
ꢃꢄꢉꢁꢂꢂꢁꢀꢂꢃ
ꢃꢇꢉꢁꢂꢂꢃ
ꢀꢁꢂ
',(ꢃ(0,77,1*
$5($
(
ꢃꢀꢁꢊꢀꢁꢇꢂꢃ
ꢃꢄ; ꢄꢁꢋꢁꢇꢃ
&
ꢃꢎ$ꢎꢃ
ꢃꢎ%ꢎꢃ
ꢃꢆꢁꢆꢂꢃ
ꢃꢇꢇꢁꢂꢂꢃ
ꢃꢎ&ꢎꢃ
ꢀꢁꢂ
ꢃꢄꢅꢁꢍꢆꢁꢀꢂꢃ
',(ꢃ(0,77,1*
$5($
ꢃꢊꢄꢃ
ꢃꢄ; ꢀꢁꢂ
ꢈ
ꢁꢇ
ꢃ
ꢌ
ꢃ
ꢁꢂ
ꢃꢆꢁꢍꢃ
'(7$,/ꢃ&ꢃ
(
6(&7,21ꢃ(ꢌ(
ꢃꢄ;ꢃꢅꢁꢀꢆꢃ
ꢃꢇꢂꢁꢄꢃ
',0(16,216ꢃ,1ꢃ0,//,0(7(56
',0(16,21ꢃ
1$0(
120,1$/ꢃ
',0(16,21
'(6&5,37,21
72/(5$1&(
ꢎ$ꢎ
ꢎ%ꢎ
723ꢃ2)ꢃ0(7$/ꢃ68%675$7(ꢃ72ꢃ723ꢃ2)ꢃ:,1'2:
723ꢃ2)ꢃ',(ꢃ(0,77,1*ꢃ$5($ꢃ72ꢃ723ꢃ2)ꢃ:,1'2:
723ꢃ2)ꢃ0(7$/ꢃ68%675$7(ꢃ72ꢃ723ꢃ2)ꢃ',(ꢃ(0,77,1*ꢃ$5($
ꢁꢉꢉ
ꢁꢅꢆ
ꢁꢄꢀ
ꢁꢇꢀ
ꢁꢇꢇ
ꢎ&ꢎ
ꢁꢂꢄ
Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C
Thermistor Connector: MOLEX P/N 53780-0270 or GCT P/N WTB08-021S-F.
Recommended Female: MOLEX P/N 51146-0200, GCT P/N WTB06-021S-F or equivalent
For detailed drawing please refer to DWG-002309 document
':*ꢌꢂꢂꢄꢀꢂꢋ
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
12
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Shipping Tray Outline
DIMENSIONS IN MILLIMETERS
266.70
254
203.7 1
6.35
127
A
A
139.70
57.15
41.40
PITCH
51.05
7°
TYP
0.76
TYP
19.81
SECTION A-A
TOP TRAY SHOWN TRANSPARENT
FOR REFERENCE ONLY
For detailed drawing of shipping trays, please refer to document TO-0479, available upon request.
Luminus Devices, Inc. • T 408.708.7000
•
www.luminus.com
13
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
1145 Sonora Court
• Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
Packing and Shipping Specification (CBT-90)
Packing Specification
Reel Dimensions
(diameter x W, mm)
Packing Configuration
Qty /Pack
Gross Weight (kg)
Stack of 5 trays with 10 devices per tray
Each pack is enclosed in ESD bag
50
150 x 280 x 85
2.7
Product Label Specification
Label Fields (subject to change):
• 6-8 digit Box number (for Luminus internal use)
• Luminus ordering part number
• Quantity of devices in pack
• Part number revision (for Luminus internal use)
• Customer’s part number (optional)
• Bin (FF-WW) as defined page 3
• 2D Bar code
Sample label –for illustration only
Shipping Box
Dimensions
(L x W x H, mm)
Shipping Box
Quantity
Material
1 -20 packs
(50 - 1000 Devices)
Carton Box
S4651
560 x 560 x 200
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
14
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
CBT-90 TE Product Datasheet
History of Changes
Rev
01
02
03
04
05
Description of Change
12/01/2015
02/09/2015
02/15/2015
06/17/2017
07/19/2017
Initial Release - Preliminary Specifications
Editorial Changes and Update of Blue Bin Kit Offering
Corrected Green Bin Kit Definition
Revised wording in last page; Removed “Preliminary”
Updated Red flux bin
Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the
product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or
suitability of the product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such
warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional
warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that
Luminus Devices may have in such information.
This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100;
7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and
other countries.
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
15
PDS-002547 Rev 05
© 2017 Luminus Devices, Inc . - All Rights Reserved
•
Sunnyvale, CA 94086
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明