CHM-11-40-80-36-XH20-F3-3 [LUMINUS]
LED High Density White COB Array;
| 型号： | CHM-11-40-80-36-XH20-F3-3 |
| 厂家： | 
Luminus |
| 描述： | LED High Density White COB Array |
| 文件： | 总10页 (文件大小：1006K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CHM-11-XH20 Product Datasheet
Generation 2
CHM-11-XH20 LED
High Density White
COB Array
Features:
• High lumen output, density
• Over 4,700 lumens, @ 3000K, 80 CRI, Tj=85ºC
• Over 4,945 lumens per square centimeter of Light Emitting Surface (LES)
• Center beam candle power with 75mm reflector and 10º beam> 42W CDM lamp
• CCT 2700K, 3000K, 3500K, 4000K, 5000K and 6500K
• CRI in 80 for all colors, 70 and 90 for most other colors
• R9 up to 90 min. CRI 98 typical in 2700K, 3000K, 3500K and 4000K
• 3 SDCM color binning accuracy
Table of Contents
Technology Overview . . . . . .2
Test Specifications . . . . . . . . .2
Chromaticity Bins . . . . . . . . . .3
Product Ordering & Shipping
Part Numbers . . . . . . . . . . . . . .4
• Excellent optical emission uniformity and color over angle consistency
• Exceptional long term color stability
Ordering Part Numbers. . . . .5
Operating Characteristics . .6
• Package thermal conductivity more than twice the industry average
• Environmentally friendly: RoHS and REACH compliant
• UL recognized, file # E465703
Optical and Electrical Character-
istics. . . . . . . . . . . . . . . . . . . . . . .7
Spectra . . . . . . . . . . . . . . . . . . . .8
Mechanical Dimensions . . . .9
Handling Notes . . . . . . . . . . 10
Applications
• Spotlights/Track Lights
• Hospitality Lighting
• Downlights
• Architectural and Specialty
• Metal Halide Replacement
• Shop Lighting
1
PDS-002923 Rev 04
© 2018 Luminus VDevices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
Technology Overview
Luminus Chip-on-Board (COB) LED series offers a complete lighting class solution designed for high performance illumination
applications. The selection covers a wide lumen range from less than 400lm to over 25,000lm, all major color temperatures and can
deliver color rendering greater than 95 at 2700K and 3000K and R9 greater than 90. These breakthroughs allow illumination engineers
and designers to develop beautifully lit spaces without sacrificing efficacy, brightness and overall quality.
Reliability
UL Recognized Compliance
Designed from the ground up, the Luminus COB LED is one of
the most reliable light sources in the world today. Having
passed a rigorous suite of environmental and mechanical stress
tests, including mechanical shock, vibration, temperature
cycling and humidity. Only then are the devices qualified for
use in a wide range of lighting application including some of the
most demanding commercial applications. Delivered with fully
qualified LM80 test data and TM21 lifetime results that certify
lumen maintenance at 35,000 hours or more, Luminus COB
LEDs are ready for the toughest challenges.
Luminus COB arrays are tested in accordance with ANSI/UL 8750
to ensure safe operation for their intended applications.
REACH & RoHS Compliance
All LED products manufactured by Luminus are REACH and
RoHS compliant and free of hazardous materials, including lead
and mercury.
Understanding Luminus COB LED Test Specifications
Every Luminus LED is fully tested to ensure it meets the high quality standards customers have come to expect from Luminus’products.
Traceability
Chromaticity Bin Range
Each Luminus COB LED is marked with a 2D bar code that
contains a unique serial number. With this serial number,
Luminus has the ability to provide customers with actual test
data measurements for a specific LED. In addition, the 2D bar
code is linked to manufacturing date codes that enables
traceability of production processes and materials.
Chromaticity binning delivers color consistency for every order.
Standard products are delivered with a 3-step MacAdam ellipse.
This ensures color performance matching in the application. For
the most demanding application, Luminus is one of only a few
companies that can provide a 2-step ellipse bin. These tightly
controlled, small distribution bins provide customers
predictable, repeatable colors.
Testing Temperature
Luminus COB products are measured at temperatures typical for
the LED operating in the fixture. Each device is tested at 85ºC
junction temperature eliminating the need to scale datasheet
specifications to real world situations.
2
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
Chromaticity Bin Structure
Chromaticity Bins: 1931 CIE Curve
0.46
ANSI C78.377-2008
3-step Ellipse
5-step Ellipse
2700K
0.44
3000K
3500K
0.42
Black Body
4000K
0.4
5000K
0.38
0.36
6500K
0.34
0.32
0.3
0.3
0.32
0.34
0.36
0.38
0.4
0.42
0.44
0.46
0.48
0.5
CIE x
CHM-11-XH20White Chromaticity Bins
The following tables describe the ANSI bin center points, the orientation angle for the MacAdam ellipse (θ °), and the maximum radii for
the ellipses. The ANSI Bin is provided for reference.
Center Point
Angle
θ (°)
3-step Bin
5-step Bin
CCT
CIEx
CIEy
a
b
a
b
2700K
3000K
3500K
4000K
5000K
6500K
0.4578
0.4338
0.4073
0.3818
0.3447
0.3123
0.4101
0.403
53.7
0.0081
0.0042
0.00408
0.00414
0.00402
0.00354
0.00285
53.2
54
0.00834
0.00927
0.00939
0.00822
0.00669
0.3917
0.3797
0.3553
0.3282
53.7
59.6
58.57
0.0137
0.0059
0.01115
0.00475
*Note: Luminus maintains a +/- 0.005 tolerance on chromaticity (CIEx and CIEy) measurements.
3
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
Product Ordering and Shipping Part Number Nomenclature
All CHM-11 products are packaged and labeled with part numbers as outlined in the table on page 5. When shipped, each package will
contain only a single flux and chromaticity bin. The part number designation is as follows:
CHM
11
NN
XX
36
QQPP
FG
W
Light Emit-
ting Surface
Diameter
Color Ren-
dering Index
(CRI)
Product Fam-
ily
Color
Temperature
Voltage (typi-
cal)
Package
Configurator
Chromaticity
Bin
Flux Bin
CHM: Chip on
Board, High
Density, Multi-
die
LES
Diameter
(mm)
Color
See Note 1
below
See page 3 for
bins
CRI
Volts
XH20
Lumens
Note 1: NN nomenclature corresponds to the following:
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
50 = 5000K
65 = 6500K
Color Temperature, CRI and R9 Values
Color Temperatures
XX Value
CRI
>70
>80
>90
R9
-
4000K, 5000K, 6500K
70
80
90
2700K, 3000K, 3500K, 4000K, 5000K, 6500K
2700K, 3000K, 3500K, 4000K, 5000K
2700K, 3000K
>0
>50
>90
>75
95
>95
3500K, 4000K
Note:
Luminus part numbers may be accompanied by prefixes or suffixes. The most common is the“Rev01”suffix indicating a part is fully released
and carries a full warranty. These additional characters may appear on shipping labels, packing slips and invoices. In all cases the basic part
number described above will always be included.
4
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
CHM-11-XH20 Part Numbers
The following tables describe products with typical flux and minimum flux measured at 1,050mA and specified at Tj = 85ºC. The values at
25ºC are calculated and shown for reference only.
Color
Output Flux (lm)
Min.
Reference Rendering
Index
Ordering Part Number
3-step MacAdam Ellipse
CCT
Typ.
(calculated)
Typ. (85ºC)
CRI (min.)
(85ºC)
(25ºC)
4,515
3,720
3,560
4,200
3,460
3,315
4,870
4,015
3,840
80
90
95
CHM-11-27-80-36-XH20-F3-3
CHM-11-27-90-36-XH20-F3-3
CHM-11-27-95-36-XH20-F3-3
2700K
4,770
4,010
3,745
4,440
3,730
3,485
5,145
4,325
4,040
80
90
95
CHM-11-30-80-36-XH20-F3-3
CHM-11-30-90-36-XH20-F3-3
CHM-11-30-95-36-XH20-F3-3
3000K
3500K
4,910
4,090
3,915
4,570
3,805
3,645
5,300
4,415
4,225
80
90
95
CHM-11-35-80-36-XH20-F3-3
CHM-11-35-90-36-XH20-F3-3
CHM-11-35-95-36-XH20-F3-3
5,335
4,975
4,315
4,005
4,965
4,630
4,015
3,725
5,755
5,370
4,655
4,320
70
80
90
95
CHM-11-40-70-36-XH20-F3-3
CHM-11-40-80-36-XH20-F3-3
CHM-11-40-90-36-XH20-F3-3
CHM-11-40-95-36-XH20-F3-3
4000K
Color
Output Flux (lm)
Min.
Reference Rendering
Index
Part Number
CCT
Typ.
(calculated)
Typ. (85ºC)
CRI (min.)
5-step MacAdam Ellipse
3-step MacAdam Ellipse
(85ºC)
(25ºC)
5,425
5,010
4,340
5,050
4,660
4,040
5,855
5,405
4,685
70
80
90
CHM-11-50-70-36-XH20-F3-5
CHM-11-50-80-36-XH20-F3-5
CHM-11-50-90-36-XH20-F3-5
CHM-11-50-70-36-XH20-F3-3
CHM-11-50-80-36-XH20-F3-3
CHM-11-50-90-36-XH20-F3-3
5000K
6500K
5,435
4,990
5,055
4,645
5,865
5,385
70
80
CHM-11-65-70-36-XH20-F3-5
CHM-11-65-80-36-XH20-F3-5
CHM-11-65-70-36-XH20-F3-3
CHM-11-65-80-36-XH20-F3-3
*Note: Luminus maintains a +/- 6% tolerance on flux measurements, a +/- 2% tolerance on CRI measurements, and a +/- 5% tolerance of R9
5
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
CHM-11-XH20 Operating Characteristics1
Optical and Electrical Characteristics
Parameter
Forward Current2
Symbol
Minimum
32
Typical
1,050
37.2
Maximum
1,440
38
Unit
mA
V
If
Forward Voltage3
Vf
Power
39
57
W
Operating Case Temperature4
Light Emitting Surface Diameter
Thermal Resistance (junction-to-case)
Junction Temperature
Viewing Angle
Tc
LES
Qjc
Tj
105
ºC
11.0
0.18
mm
ºC/W
ºC
140
120
Degree
Note 1: Ratings are based on operation at a constant junction temperature of Tj = 85ºC.
Note 2: To prevent damage refer to operating conditions for maximum operating conditions
Note 3: Voltage is rated at typical forward current. For voltage at higher drive current, refer to performance graphs.
Note 4: CHM-11 COB minimum operating current is suggested to be no less than 20% of the typical value. While lower levels will not harm the device, they
may result in uneven lighting across the LES area.
Note 5: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
Note 6: Datasheets are subject to changes without prior notice. Please refer to the Luminus web site for the latest datasheet revisions.
6
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
CHM-11-XH20 Optical & Electrical Characteristics
Relative Output Flux vs. Forward Current @ 85ºC
Forward Current vs. Forward Voltage @ 85ºC
1440
1240
1040
840
640
440
240
40
160%
140%
120%
100%
80%
60%
40%
20%
0%
40
240
440
640
840
1040
1240
1440
31
32
33
34
35
36
37
38
39
40
Forward Current (mA)
Forward Voltage (V)
Relative Output Flux vs. Junction Temperature
Change in Voltage vs. Junction Temperature
120%
39
38
37
36
35
34
33
100%
80%
60%
40%
20%
0%
5
15
25
35
45
55
65
75
85
95
105
5
15
25
35
45
55
65
75
85
95
105
Junction Temperature (ºC )
Junction Temperature (ºC )
Change in CIEx vs. Junction Temp. (3000K, 80CRI)
Change in CIEy vs. Junction Temp. (3000K, 80CRI)
0.02
0.02
0.01
0.00
0.01
0.00
-0.01
-0.02
-0.01
-0.02
5
15
25
35
45
55
65
75
85
95
105
5
15
25
35
45
55
65
75
85
95
105
Junction Temperature (ºC )
Junction Temperature (ºC )
7
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
CHM-11 Optical & Electrical Characteristics
Typical Spectrum
120.00%
100.00%
80.00%
60.00%
40.00%
20.00%
0.00%
Warm White
Neutral White
Cool White
3000K-90CRI
3000K-97CRI
400
450
500
550
600
650
700
750
800
-20.00%
Wavelength (nm)
Typical Polar Radiation Pattern
Typical Angular Radiation Pattern
120%
100%
80%
60%
40%
20%
0%
-80
-60
-40
-20
0
20
40
60
80
Anglular Displacement (Degrees)
8
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
Mechanical Dimensions
1.20
.047
2.00
.079
1.60
.063
.30
.012
19.00
.748
HOLES
1.30
.051
2X R.70
.028
.87±.15
.034±.006
3.20
.126
9.50
.374
HOLES
2X 2.73
.108
B
2X .20
.008
DETAIL
2 PLACES
1.37
.054
1.20
.047
9.50
.374
Tc POINT
HOLES
19.00±.25
.748±.010
SUBSTRATE
19.00
.748
HOLES
2X 7.10
.280
9.50±.25
.374±.010
SUBSTRATE
11.0±.2
.433±.008
LIGHT EMITTING
SURFACE
2X R.50
.020
.10[.004]
A
9.50±.25
.374±.010
SUBSTRATE
.50±.10
.020±.004
RING HEIGHT
2X
5.50
.217
2X 4.00±.10
.157±.004
12.50±.20
.492±.008
RING O.D.
M
.36[.014]
A B
19.00±.25
.748±.010
DWG-002644
SUBSTRATE
Shipping Container
225 pcs per box
Each bag is boxed for
easier storage/ stacking
Trays are sealed in
an anti-static bag
45 pcs per tray
5 trays are stacked together
with separate cover
Label
Luminus Label Model:
Luminus Devices Inc
XXXXXX-XX-XX (Manufacturer Part Number & Bin Kits)
Rev XX
Bar code
Bar code
XXX-XX-XX-XX-XX-XXXX-XX-X(Customer Part Number)
Qty: XX
Bar code
XXXXXXXXXXXXXX(Box ID)
Bar code
9
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-11-XH20 Product Datasheet
Handling Notes for Luminus COBs
Luminus products are designed for robust performance in general lighting application. However, care must be taken when handling and
assembling the LEDs into their fixtures. To avoid damaging Luminus COBs please follow these guidelines.
The following is an overview of the application notes detailing some of the practices to follow when working with these devices. More
detailed information is available on the Luminus web site at www.luminus.com.
General Handling
Electrical Contact
Devices are made to be lifted or carried with tweezers on two
adjacent corners opposite the contact pads. At no time should
the devices be handled by or should anything come in contact
with the light emitting surface (LES) area. This area includes the
yellow colored circular area and the ring surrounding it. There
are electrical connections under the LES which if damaged will
cause the device to fail.
Luminus COBs are designed with contact pads on their top
surface. These pads are clearly marked with + and – polarity.
Wires can be soldered to the contact pads for electrical
connections or other solderless connector products are
available.
If wires are being soldered to the COB product, we recommend
attaching these wires prior to mounting the devices to a heat
sink. Please contact Luminus for specific recommendations on
how to solder wires if not familiar with the standard practice.
Luminus can also offer design recommendations for jigs to
allow easily soldering multiple products in rapid succession.
In addition, the ring frame itself should not be used for moving,
lifting or carrying the device. Also do not attach any optics or
mechanical holders to the ring as it is not capable to handle the
mechanical stress.
Static Electricity
Chemical Compatibility
Luminus COBs are electronic devices which can be damaged by
electrostatic discharge (ESD). Please use appropriate measures
to assure the devices do not experience ESD during their
handling and or storage. ESD protection guidelines should be
used at all times when working with Luminus COBs.
The resin material used to form the LES can getter hydrocarbons
from the surrounding environment. As a results, certain
chemical compounds are not recommended for use with the
Luminus products. Use of these compounds can cause damage
to the light output of the device and may permanently damage
the device. Please refer to www.luminus.com for a list of the
compounds not recommended for use with the Luminus COB
products.
Storage: Luminus products are delivered in ESD shielded bags
and should be stored in these bags until used.
Assembly: Individuals handling Luminus COBs during assembly
should be trained in ESD protection practices. Assemblers
should maintain constant conductive contact with a path to
ground by means of a wrist strap, ankle straps, mat or other ESD
protection system.
Thermal Interface Material (TIM)
Proper thermal management is critical for successful operation
of any LED system. Excess operating temperature can reduce
the light output of the device. And excessive heating can cause
permanent damage to the device. Proper TIM material is a
crucial component for effective heat transfer away from the LED
during normal operation. Please refer to www.luminus.com for
specific recommendations for TIM solutions.
Transporting: When transporting the devices from one
assembly area to another, ESD shielded carts and carriers should
be used.
10
PDS-002923 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明