MP303021C23590 [LUMINUS]

Salud Human Centric Mid Power LED;


型号：	MP303021C23590
厂家：	Luminus
描述：	Salud Human Centric Mid Power LED
文件：	总14页 (文件大小：867K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MP-3030-21C2

Mid Power Product Datasheet

Salud™ Human Centric

Mid Power LED 3030-21C2

Features:

• Engineered spectrum with enhanced cyan for melatonin suppression

• Typical Melanopic/Photopic (M/P) ratios speciﬁed

Table of Contents

Technology Overview ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ2

• Enhanced M/P for healthy daytime lighting with warmer CCTs

• Full spectrum emission – no cyan gap

Product Selection Table ꢀ ꢀ ꢀ ꢀ3

Operating Characteristics ꢀ ꢀ6

Chromaticity Diagramꢀ ꢀ ꢀ ꢀ ꢀ ꢀ8

Color Ranks ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ7

Chromaticity Coordinate Group

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ7

Characteristics Graphsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ9

Ordering Nomenclature ꢀ ꢀ ꢀ ꢀ4

Package Dimension ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11

Soldering Pad Pattern ꢀ ꢀ ꢀ ꢀ 11

Dimension and Polarityꢀ ꢀ ꢀ 11

Reel & Box Packagingꢀ ꢀ ꢀ ꢀ ꢀ 13

• Excellent color rendering – Ra>90

• No near-UV radiation – safer and better than sunlight

Applications

• Replacement lamps

• Down lights

• Panel lighting

• Architectural lighting

MP-3030-21C2

Mid Power Product Datasheet

Technology Overview

Luminus mid power LEDs are lighting class solutions designed for high performance general lighting applicationsꢀ These state-of-the-art

LEDs allow illumination engineers and designers to develop lighting solutions with maximum eﬃcacy, brightness and overall qualityꢀ

Reliability

REACH & RoHS Compliance

Luminus mid power LED is one of the most reliable light sources

in the world todayꢀ Having passed a rigorous suite of

environmental and mechanical stress tests, including

mechanical shock, vibration, temperature cycling and humidity,

it is fully qualiﬁed for use in a wide range of high performance

and high eﬃcacy lighting applicationsꢀ

The Luminus 3030 Mid Power LED is compliant to the Restriction

of Hazardous Substances Directive or RoHSꢀ

Understanding Luminus Mid Power LED Test Speciﬁcations

Every Luminus LED is fully tested to ensure it meets the high quality standards customers have come to expect from Luminus productsꢀ

Testing Temperature

Luminus Mid Power products are measured at a case temperature of 25 ºC and placed into intensity, chromaticity and voltage bins as

described herein

MP-3030-21C2

Mid Power Product Datasheet

Product Selection Table

Standard test condition = 45 mA, T =25 °C

Minimum

Minimum Flux Typical Flux

Typꢀ Melanopic

Nominal CCT

Ordering Part Number

Min R9

Typ R9

CRI

(Lumens)

Ratio (MR)

3000K

3500K

4000K

5000K

MP-3030-21C2-30-90

MP-3030-21C2-35-90

MP-3030-21C2-40-90

MP-3030-21C2-50-90

0ꢀ68

0ꢀ72

0ꢀ80

0ꢀ96

*Tolerance of measurements of the luminous ﬂux is ±±7

* Tolerance of measurements of the CRI is ±ꢀ

*IFP condition with Pulse: Width ≤100μs Duty cycle ≤1/10

Salud Line of 3030 Midpower Products

At Luminus, we have also leveraged our expertise in creating special LED spectrums to develop the Salud line of 3030 midpower

productsꢀ These energizing, productivity-enhancing, attractive LED light sources are rich in cyan content while maintaining warm CCTs

which lighting designers prefer, such as 3000K, 3500K, 4000K, and 5000Kꢀ At the same time, the Salud line also has saturated 660nm red

spectral content and 90 CRI minimum, which means we render beautiful colors and skin tones while we also keep you healthyꢀ All of this

is done without any of the harmful UV which you would ﬁnd in sunlightꢀ While other LEDs might promise you a spectrum similar to

sunlight (including a bit of UV – beware!), Salud oﬀers a broad spectrum with a high MR for safe, healthy daytime lighting applicationsꢀ

Some of the metrics used in HCL include circadian stimulus (CS) and melanopic ratio (MR), also commonly known as melanopic/

photopic (M/P), not to be confused with the“other”M/P, mesopic/photopicꢀ

•

The Melanopic/Photopic ratio (a.k.a. M/P ratio, MP ratio, or“MR”) is a metric to quantify lighting’s circadian eﬀect

•

P(λ) is spectral power distribution of the light source

C(λ) is the circadian action function (melanopic response curve)

V(λ) is the eye sensitivity function (visual or photopic response curve)

The higher MR ratio, the stronger the circadian eﬀect of the light source

MP-3030-21C2

Incoming Quality Control Speciﬁcation

Product Ordering and Shipping Part Number Nomenclature

All mid power products are packaged and labeled with part numbers as outlined in belowꢀ When shipped, each reel will contain only a

single ﬂux and voltage binꢀ The part number designation is as follows:

3030 Mid Power LEDs

Package

Type

Package

Conﬁgurator

Mid Power

Nominal CCT

Minimum CRI

3030

21C2

Example :

The part number MP-3030-21C2-30-80 refers to a 3030 mid power emitter with nominal color temperature of 3,000k and minimum CRI of 80. Please refer to

page 5 for a description of available CCT and CRI combinations.

Note 1: CCT Codes:

30= 3000 k

Note 2: CRI Codes:

35 = 3500 k

40 = 4000 k

50= 5000 k

Each mid power product shipped will be labeled with its speciﬁc ﬂux and voltage binsꢀ Not all bins listed are available in all CCTs and CRIsꢀ

Test condition = 45 mA, T =25 °C

Forward Voltage Bins (T =25°C)

Bin Code

Minimum Voltage (Volts)

Maximum Voltage ( Volts)

5.2

5.4

5.6

Luminus Flux Bins

Bin Code

Minimum Flux (Lumens)

Maximum Flux (Lumens)

Tolerance of measurements o f forward voltage is ±0.1V

MP-3030-21C2

Mid Power Product Datasheet

3030 Mid Power Operating Characteristics

Optical and Electrical Characteristics(T_c=25ꢀC)

Parameter

Symbol

V_f

Minimum

5ꢀ2

Typical

5ꢀ3

Maximum

Unit

Condition

I_f=45mA

V_r=5V

Forward Voltage

Reverse Current

View Angle

5ꢀ6

I_r

2θ^1/2

Rth_j-sp

ESD

120

I_f=45mA

Thermal Resistance

Electrostatic Discharge

ºC/W

1000

Note 1: To prevent damage refer to operating conditions and derating curves for appropriate maximum operating conditions

Note 2: Maximum operating case temperature combined with maximum drive current deﬁnes the total maximum operating condition for the device. To

prevent damage, please follow derating curves for all operating conditions.

Note 3: Mid power LEDs are designed for operation up to an absolute maximum forward drive current as speciﬁed above. Product lifetime data is speciﬁed at

typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical

forward drive currents. Actual device lifetimes will also depend on case temperature. Refer to the current vs. case temperature derating curves for

further information.

Note 4: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.

Absolute Maximum Ratings (T =25ꢀC)

Parameter

Symbol

Rating

Unit

Forward Current

I_f

120

Pulse Forward Current

Power Dissipation

Reverse Voltage

I_fp

200

P_d

V_r

0.8

Operating Temperature

Storage Temperature

Junction Temperature

Soldering Temperature

T_opr

T_stg

T_j

-40~+85

°C

-40~+100

°C

135

°C

T_sld

230 °C or 260 °C for 10 sec

*IFP condition with Pulse: Width ≤100μs Duty cycle ≤1/10

MP-3030-21C2

Mid Power Product Datasheet

Color Bins

Color Code

Step

Center (Tc=25 °C)

Radius

Angle(deg)

0.008340

0.013900

0.009270

0.015450

0.009390

0.015650

0.008220

0.013700

0.00408

0.00680

0.00414

0.00690

0.00402

0.00670

0.00354

0.00590

3000

3500

4000

5000

0.4342

0.4080

0.3825

0.3451

0.4028

0.3916

0.3798

0.3554

53.13

54.00

53.43

59.37

Ellipse Deﬁnition

*Note: Tolerance of measurements of the chromaticity Coordinate is ±0.005

Chromaticity coordinates as per ANSI standard.

MP-3030-21C2

Mid Power Product Datasheet

te Group

oordina

ticity C

Chroma

0.44

0.42

0.4

3000

3500

4000

0.38

0.36

0.34

0.32

0.3

5000

0.3

0.32

0.34

0.36

0.38

0.4

0.42

0.44

0.46

0.48

0.5

MP-3030-21C2

Mid Power Product Datasheet

Typical optical/Electrical Characteristics Graphs

Forward Current vs. Forward Voltage Forward Current vs. Relative Intensity

120%

110%

100%

90%

450%

400%

350%

300%

250%

200%

150%

100%

50%

80%

70%

60%

100

150

200

250

100

150

200

250

IF (mA)

Ambient Temperature vs. Relative Forward Voltage

Ambient Temperature vs. Relative Intensity

105%

100%

95%

90%

85%

80%

120%

100%

80%

60%

40%

20%

TS (℃)

100

TS (℃)

100

3030Mid Power Product Datasheet

Preliminary

haracteristic

lectrical C

Optical/E

Typical

Typical Polar Radiation Pattern

Spectrum Distribution

MP-3030-21C2

Mid Power Product Datasheet

Package Dimension (mm)

Recommended Soldering Pad Pattern

Note: tolerance : .X: 0.10mm .XX: 0.05mm

MP-3030-21C2

Mid Power Product Datasheet

f Tape(mm)

imensions O

Package D

User feed direction

Start

End

Not less than 400mm

Leader

Not less than 160mm

End

Capacity per reel

(5000 PCs LEDs)

MP-3030-21C2

Mid Power Product Datasheet

Package Dimensions of Reel (mm)

User feed direction

Upper Band

Carrier tape

ꢁ13 mm

ꢁ165ꢀ1mm(6ꢀ5 inch)

Package Dimensions of Reel (mm)

Label: contains the type, Lot #,

Quantity, Product parameters

Desiccant (bag)

Vacuum sealed

antistatic bag

Humidity Card (bag)

Label: contains the type, Lot #,

Quantity, Product parameters

MP-3030-21C2

Mid Power Product Datasheet

aging

Box Pack

Label: contains the type,

Lot #, Quantity, Product

parameters

*Capacity 5 reels per box

Label: contains the type,

Lot #, Quantity, Product

parameters

*Capacity 10 packages per box

MP-3030-21C2

Mid Power Product Datasheet

for Use

Precaution

Storage:

1ꢀ

2ꢀ

This device is rated at MSL 3 per JEDEC J-STD-020 standardꢀ

Recommended storage condition:

At 5 °C- 30 °C and relative humidity 60% RH in its original package

3ꢀ

After this bag is opened, devices that will be applied to infrared reﬂow, vapor - phase reﬂow, or equivalent soldering process

must be:

Completed within 168 hours

Stored at less than 60%RH

If not completely used within 168 hours, seal the remaining in the moisture barrier bag

4ꢀ

5ꢀ

Devices require baking before mounting, if 3 a) is not metꢀ

If baking is required, devices must be baked under below conditions:

24 hours at 60 °C +/- 5 °C

Static Electricity:

1ꢀ The products are sensitive to static electricity, and care should be taken when handling themꢀ

2ꢀ Static electricity or surge voltage will damage the LEDsꢀ It is recommended to wear a anti-electrostatic wristband or an anti-elec-

trostatic gloves when handling the LEDsꢀ

3ꢀ All devices, equipment and machinery must be properly groundedꢀ It is recommended that measures be taken against surge volt-

age to the equipment that mounts the LEDsꢀ

MP303021C23590 [LUMINUS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E