SBR-90-W65S-R71-NA100 [LUMINUS]

Extremely high optical output from a 9 mm2 square emitter:;


型号：	SBR-90-W65S-R71-NA100
厂家：	Luminus
描述：	Extremely high optical output from a 9 mm2 square emitter:
文件：	总15页 (文件大小：1834K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SBT-90 Product Datasheet

SBT-90 LEDs

Features:

• Extremely high optical output from a 9 mm²square emitter:

• Up to 2300 lumens at 13.5A from a single chip (White)

• Over 1,600 lumens at 13.5A (Red)

Table of Contents

Technology Overview . . . . . .2

Binning Structure . . . . . . . . . .3

Chromaticity Bins . . . . . . . . . .4

• Choice of 5700K or 6500K color point

• High thermal conductivity package - junction to case thermal resistance of only

0.5 °C/W

• Large, monolithic chip with uniform emitting area of 9 mm²

Product Shipping &

• Unencapsulated die with low proﬁle protective window optimizes optical coupling in

Labeling Information. . . . . . .5

etendue-limited applications

Ordering Information . . . . . .6

Electrical Characteristics . . .7

Optical Characteristics . . . . .8

White Characteristics. . . . . . .9

Radiation Patterns . . . . . . . 10

• Electrically isolated thermal path

• Environmentally friendly: RoHS compliant

Applications

Output vs Temp ,Lifetime and

Spectrum. . . . . . . . . . . . . . . . 11

• Fiber-coupled illumination

• High-Brightness and large format

LCD back-light units

• Architectural and Entertainment

lighting

• Edge-illuminated lighting guides

Mechanical Dimensions . . 12

Solder Proﬁle . . . . . . . . . . . . 14

History of Changes . . . . . . . 15

• Projection and micro-display based

• High output, Etendue-limited

applications

lighting applications

Luminus Devices, Inc. • T 978.528.8000

175 New Boston Street

•

www.luminus.com

Woburn, MA 01801

PDS-001540 Rev 15

SBT-90 Product Datasheet

Technology Overview

Luminus LED beneﬁt from a suite of innovations in the ﬁelds of chip technology, packaging and thermal management. These

breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high eﬃciency.

Designed from the ground up, Luminus LEDs are one of the

most reliable light sources in the world today. They have passed

a rigorous suite of environmental and mechanical stress tests,

including mechanical shock, vibration, temperature cycling and

humidity, and have been fully qualiﬁed for use in extreme high

power and high current applications. With very low failure rates

and median lifetimes that typically exceed 60,000 hours,

Luminus LEDs are ready for even the most demanding

applications.

Luminus Technology

Luminus’ technology enables large area LED chips with uniform

brightness over the entire LED chip surface. The optical power

and brightness produced by these large monolithic chips

enable solutions which replace arc and halogen lamps where

arrays of traditional high power LEDs cannot.

Packaging Technology

Thermal management is critical in high power LED applications.

With a thermal resistance from junction to heat sink of 0.5º C/W,

Luminus SBT-90 LEDs have the lowest thermal resistance of any

LED on the market. This allows the LED to be driven at higher

current densities while maintaining a low junction temperature,

thereby resulting in brighter solutions and longer lifetimes.

Environmental Beneﬁts

Luminus LEDs Whitehelp reduce power consumption and the

amount of hazardous waste entering the environment. All

Luminus LED products manufactured by Luminus are RoHS

compliant and free of hazardous materials, including lead and

mercury.

Reliability

Understanding Luminus LED Test Speciﬁcations

Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.

Testing Temperature

Multiple Operating Points

Luminus surface mount LEDs are typically tested with a 20 msec

input pulse and a junction temperature of 25ºC. Expected ﬂux

values in real world operation can be extrapolated based on the

information contained within this product data sheet.

The tables on the following pages provide typical optical and

electrical characteristics. Since the LEDs can be operated over a

wide range of drive conditions (currents from less than 1A to

13.5A, and duty cycle from <1% to 100%), multiple drive

conditions

are listed.

SBT-90 White LEDs are production tested at 9.0 A. The values

shown at other current conditions are for additional reference at

other possible drive conditions.

SBT-90 Red LEDs are productions tested of 13.5A

Luminus Devices, Inc. • T 978.528.8000

•

www.luminus.com

PDS-001540 Rev 15

175 New Boston Street

• Woburn, MA 01801

SBT-90 Product Datasheet

SBT-90 Binning Structure

SBT-90 LEDs are tested for luminous ﬂux and chromaticity of the drive current speciﬁed below and placed into one of the following

luminous ﬂux (FF) and chromaticity (WW) bins:

Flux Bins

Minumum Flux (lm) @

9.0A

Maximum Flux (lm) @

9.0A

Color

Flux Bin (FF)

1,590

1,710

1830

1966

2100

2260

1,710

1,830

1966

2100

2260

2420

W57S/ W65S

5700K / 6500K, Standard CRI (typ. 70)

Minumum Flux (lm) @ Minumum Flux (lm) @

Flux Bin (FF)

13.5A

770

970

1150

1350

1570

Red

1150

1350

1570

1850

Wavelength Bins

Minimum Wavelength Maximum Wavelength

Color

Red

Wavelength Bin (WW)

@ 13.5A

615

619

623

627

*Note:

Luminus maintains a +/- 6% tolerance on ﬂux measurements. Luminus maintains a +/- 2% tolerance on CRI measurements.

Chromaticity Bins

Luminus’Standard Chromaticity Bins: 1931 CIE Curve

0.380

5700

0.355

0.330

0.305

0.280

BB Locus

6500

0.270

0.295

0.320

CIEx

0.345

0.370

Luminus Devices, Inc. • T 978.528.8000

•

www.luminus.com

175 New Boston Street

• Woburn, MA 01801

SBT-90 Product Datasheet

The following tables describe the four chromaticity points that bound each chromaticity bin. Chromaticity bins are grouped together

based on the color temperature.

6500K Chromaticity Bins

5700K Chromaticity Bins

CIEx

Bin Code

(WW)

Bin Code

(WW)

CIEx

CIEy

0.307

0.322

0.323

0.309

0.305

0.313

0.315

0.307

0.303

0.312

0.313

0.305

0.313

0.321

0.322

0.315

0.312

0.321

0.313

0.302

0.320

0.321

0.303

0.283

0.303

0.307

0.289

0.307

0.309

0.293

0.311

0.326

0.316

0.302

0.321

0.329

0.319

0.311

0.330

0.339

0.329

0.321

0.329

0.337

0.326

0.319

0.339

0.348

0.337

0.329

0.335

0.354

0.348

0.330

0.304

0.330

0.311

0.293

0.311

0.302

0.285

0.322

0.337

0.336

0.323

0.321

0.329

0.322

0.321

0.329

0.321

0.329

0.337

0.330

0.329

0.338

0.337

0.329

0.320

0.338

0.321

0.324

0.337

0.326

0.314

0.335

0.342

0.331

0.324

0.346

0.354

0.342

0.335

0.342

0.349

0.337

0.331

0.354

0.362

0.349

0.342

0.352

0.368

0.362

0.346

F3*

F4*

G3*

G4*

H3*

H4*

J3*

J4*

*Sub-bins within ANSI deﬁned quadrangles per ANSI C78.377-2008

Luminus Devices, Inc. • T 978.528.8000 • www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Product Shipping & Labeling Information

All SBT-90 products are packaged and labeled with their respective bin as outlined in the tables on pages 3 & 4. When shipped, each

package will only contain one bin. The part number designation is as follows:

SBT-90 White

SBT

WNNX

F71

Product Family

Chip Area

Color

Package Conﬁguration

Flux Bin

Chromaticity Bin

Surface Mount

(window)

CCT & CRI

See Note 1 below

9.0 mm²

Internal Code

See page 3 for bins

Note 1: WNNX nomenclature corresponds to the following:

W = White

NN = color temperature, where:

65 corresponds to 6500K

57 corresponds to 5700K

X = color rendering index, where:

S (standard) corresponds to a typical CRI of 70

Example:

The part label SBT-90-W65S-F71-NA-G4 refers to a 6500K standard CRI white, SBT-90 emitter, with a ﬂux range from 1,590 to 1,710 lumens and a

chromaticity value within the box deﬁned by the four points (0.313, 0.329), (0.321, 0.337), (0.321, 0.348),(0.312, 0.339).

SBT-90- Red

SBT

F75

Product Family

Chip Area

Color

Package Conﬁguration

Flux Bin

Wavlength Bin

Surface Mount

(window)

9.0 mm²

R: Red

Internal Code

See bins page

Example:

The part number SBT-90-R-F75-BK-R4 refers to a red part, with a ﬂux range of 600 - 770 lumens and a wavelength range of 619 nm to 623 nm.

Note 2: Some ﬂux and chromaticity bins may have limited availability. Application speciﬁc bin kits, consisting of multiple bins, may be available.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Ordering Information

Ordering Part Number^1,2

SBT-90-W57S-F71-NA100

SBT-90-W65S-F71-NA100

SBR-90-W57S-R71-NA100

SBR-90-W65S-R71-NA100

Color

Description

5700K White

6500K White

5700K White

6500K White

White SBT-90 consisting of a 9mm²LED on ceramic substrate

SBR-90 evaluation module consisting of a SBT-90 surface mount device mounted on

an aluminum star board

Ordering Part Number²

Color

Description

SBT-90-R-F75-HN100

Red

Red SBT-90 consisting of a 9 mm²LED on a ceramic substrate

SBR-90 evaluation module consisting of a SBT-90 surface mount device mounted

on an aluminum star board

SBR-90-R-R75-HN100

Red

Note 1: NA100 - denotes a bin kit comprising of all ﬂux bins with a minimum ﬂux of 1,590 lumens and chromaticity bins at the 6500K color point.

Note 2: For ordering information on all available bin kits, please see PDS-001788: SBT-90 Binning & Labeling document.

Luminus Devices, Inc. • T 978.528.8000

•

www.luminus.com

PDS-001540 Rev 15

175 New Boston Street

• Woburn, MA 01801

SBT-90 Product Datasheet

SBT- 90- Electrical Characteristics¹

White

Drive Condition²

Parameter

9.0 A

Symbol

Values at Test Currents

Unit

A/mm²

Current Density

Forward Voltage

1.0

3.5

V_F

Common Characteristics

Parameter

Symbol

White

9.0

Red

9.0

Unit

mm²

Emitting Area

Emitting Area Dimensions

Forward Voltage Temperature Coeﬃcient³

Thermal Coeﬃcient of Photometric Flux

3 x 3

-2.45

3 x 3

-1.3

mV/C

%/C

-0.96

Absolute Maximum Ratings

Parameter

Symbol

White

0.2

Red

0.2

Unit

Absolute Minimum Operating Current

Maximum Current⁴

13.5

Maximum Junction Temperature⁵

150

125

ºC

T_j-max

Storage Temperature Range

-40/+100

Note 1: All ratings are based on operation at room temperature.

Note 2: Listed drive conditions are typical for common applications. SBT-90 devices can be driven at currents ranging from 1A to 13.5A and at duty

cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired

to meet application lifetime requirements.

Note 3: Forward voltage temperature coeﬃcient at current density of 1 A/mm²and heat sink temperature of 40ºC. Contact Luminus for value at other

drive conditions.

Note 4: Luminus SBT-90 LEDs are designed for operation to an absolute maximum forward drive current density of 1.5 A/mm². Product lifetime data is

speciﬁed at recommended forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device

lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the

lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5

microseconds.

Note 5: Lifetime is dependent on LED junction temperature . Thermal calculations based on input power and thermal management system should be

performed to ensure T_jis maintained below T_j-maxrating or life will be reduced. Refer to lifetime plots on page 9 and lifetime and reliability

application note for further information.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

SBT-90-R Optical & Electrical Characteristics

Red

Drive Condition²

Parameter

13.5A

Values³

1.5

Symbol

Unit

A/mm²

Current Density

V_{F min}

V_F

2.3

Forward Voltage

2.7

V_{F max}

Φ_{V typ}

λ_d

3.6

Luminous Flux⁴

Dominant Wavelength⁵

FWHM

1350

620

Δλ_1/2

0.695

0.305

Chromaticity Coordinates^6,7

Relative Luminous Flux vs. Forward Current¹

Forward Current vs. Forward Voltage

Note 1: All ratings are based on a junction test temperature Tj = 25ºC. See Thermal Resistance section for Tj deﬁnition.

Note 2: Listed drive conditions are typical for common applications. SBT-90 devices can be driven at currents ranging from <1 A to

13.5 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction

temperature desired to meet application lifetime requirements.

Note 3: Unless otherwise noted, values listed are typical. Devices are production tested and speciﬁed at 13.5A. Other values are for reference only.

Note 4: Total ﬂux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level.

For speciﬁc minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus.

Note 5: Minimum and Maximum Dominant Wavelengths are based on typical values +/- 5nm for Red.

Note 6: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1.

Note 7: For reference only.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

SBT-90-W Characteristics

Relative Output Flux vs. Forward Current¹

Forward Current vs. Forward Voltage

120%

100%

80%

60%

40%

20%

7.5

4.5

1.5

0.5

1.5

2.5

3.5

Forward Voltage (V)

Current (A)

Median Lifetime²

Lumen Maintenance vs. Time³

160

140

120

100

1.2

0.8

0.6

0.4

0.2

L70

Measured

Extrapolated

1,000

10,000

100,000

100

1,000

10,000

100,000

Median Lifetime Extrapolation (Hours)

Time (hours)

Typical Spectrum⁴

Current Derating Curve

1.2

0.8

0.6

0.4

0.2

Rth j-a = 1.82 C/W

Rth j-a = 2.00 C/W

Rth j-a = 3.00 C/W

Rth j-a = 4.00 C/W

400

450

500

550

600

650

700

100

120

140

Wavelength (nm)

Ambient Temperature (C)

Note 1: Yellow squares indicate typical operating conditions.

Note 2: Median expected lifetime in dependence of junction temperature at 0.35 A/mm²in continuous operation. Lifetime deﬁned as time to 70% of

initial intensity. Based on lifetime test data of uncoated GaN devices at this time. Data can be used to model failure rate over typical product

lifetime (contact Luminus for lifetime reliability test data for 1A/mm²condition).

Note 3: Lumen maintenance in dependence of time at 0.35 A/mm²in continuous operation with junction temperatures of 100 ºC. Lumen

maintenance calculation doesn’t consider open and short circuit failure modes into account.

Note 4: Typical spectrum at current density of 0.35 A/mm²in continuous operation.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Typical Radiation Patterns

Typical Polar Radiation Pattern for White

Typical Angular Radiation Pattern for White

120%

100%

80%

60%

40%

20%

-30°

30°

-60°

60°

-120% -100%

-80%

-60%

-40%

-20%

20%

40%

60%

80%

100%

120%

-80

-60

-40

-20

Anglular Displacement (Degrees)

Thermal Resistance

Typical Thermal Resistance :

Window

T_j

T_c

T_b

Die Junction

0.5 ºC/W

1.2 ºC/W

1.4 ºC/W

R_j-c

Window Frame

R_j-b

Ceramic Substrate

Al coreboard

R_j-hs

T_hs

Note 1: Thermal resistance values are based on

FEA model results correlated to

measured R_θj-hsdata.

Heat sink

Note 2: Thermal resistance is measured using a

SAC305 solder, a Bergquist Al-clad

MCPCB, and eGraf 1205 thermal

interface material.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

SBT-90-R Output vs. Temp., Lifetime and Spectrum

Median Lifetime Estimate vs. Tj¹

Lumen Maintenance²

Typical Spectrum³

Angular Distribution

Note 1. Median lifetime estimate as a function of junction temperature at 1.5A/mm²in continuous operation. Lifetime deﬁned as time to

70% of initial intensity. Based on preliminary lifetime test data. Data can be used to model failure rate over typical product lifetime.

Note 2. Lumen maintenance vs. time at 1.5A/mm²in continuous operation, junction temperature equal to 25ºC.

Note 3. Typical spectrum at current density of 1.5 A/mm²in continuous operation.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Mechanical Dimensions – SBT-90 Emitter

',0(16,216ꢇ,1ꢇ0,//,0(7(56

ꢀꢂꢅꢈꢁꢂꢀꢋ

ꢄ

ꢁꢂꢀꢅ

ꢁꢂꢁꢁ

ꢀꢁꢂꢁꢁ

ꢃ

ꢆꢂꢁꢁ

(0,77,1*ꢇ

$5($

127&+

ꢈꢂꢈꢉ

,1',&$7(6

$12'(ꢇꢍꢄꢎ

ꢊꢂꢁꢁ

ꢈꢂꢊꢀ

ꢊꢂꢊꢁ

ꢋꢂꢀꢁ

ꢄ

ꢁꢂꢀꢅ

ꢁꢂꢁꢁ

ꢀꢀꢂꢁꢁ

ꢃ

ꢅꢂꢀꢁ

ꢀꢂꢈꢁ

6(&7,21ꢇ$ꢃ$ꢇ

6&$/(ꢇꢈꢇꢌꢇꢀ

ꢆꢂꢁꢁ

(0,77,1*ꢇ

$5($

ꢁꢂꢐꢆꢁꢂꢁꢆ

'$780ꢇ%ꢇ72

(0,77,1*ꢇ$5($

ꢁꢂꢉꢆꢁꢂꢀꢈ

(0,77,1*ꢇ$5($

72ꢇ723ꢇ

2)ꢇ*/$66

ꢁꢂꢏꢉꢁꢂꢀꢁ

'$780ꢇ%ꢇ72

723ꢇ2)ꢇ*/$66

'(7$,/ꢇ%

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Mechanical Dimensions – SBT-90 Star Board

7.1

30.0°

60.0°

3.2

4.1

16.4

SOLDER PADS

19.9

TYP

3.5

ANODE

PADS

CATHODE

PADS

Note 1: Tolerances per IPC-610, Class 2

Note 2: For detail drawing of SBT-90, please see DWG-001553

Note 3: Recommended mounting screw: M3 or #4

Note 4: All dimensions in millimeters

Note 5: All anode pads on board are interconnected. All cathode pads on board are interconnected

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

Solder Proﬁle

SAC 305 Reﬂow Proﬁle Window For Low Density Boards

250

225

200

175

150

125

100

120

150

Time (sec)

180

210

240

270

300

Lead free solder guideline for low density boards

Solder Proﬁle Stage

Proﬁle length, Ambient to Peak

Time above 217º C

Lead-Free Solder

2.75 - 3.5 minutes

30 - 60 seconds

≤4º C/sec

Cooldown Rate

Cooldown duration

45 15 sec

Note 1: Temperatures are taken and monitored at the component copper layer

Note 2: Optimum proﬁle may diﬀer due to oven type, circuit board or assembly layout

Note 3: Recommended lead free, no-clean solder: AIM NC254-SAC305

Note 4: Refer to APN-001473 soldering and handling application note for additional solder proﬁles and details

Note 5: MSL- 1 Level

Luminus Devices, Inc. • T 978.528.8000

•

www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBT-90 Product Datasheet

History of Changes

Rev

Date

Description of Change

Added SBT-90-W57S Product

Editorial Fixs

06/16/2016

07/20/2016

Updated graphs on page 8 and 11

Clariﬁed minimum operating current

Updated thermal resistance values

Editorial Changes

06/04/2016

The products, their speciﬁcations and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus

Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or

information contained herein. None of the information provided herein should be considered to be a representation of the ﬁtness or suitability of the

product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as

accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No

information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices

This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100;

7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and

other countries.

Luminus Devices, Inc. • T 978.528.8000

• www.luminus.com

PDS-001540 Rev 15

175 New Boston Street • Woburn, MA 01801

SBR-90-W65S-R71-NA100 [LUMINUS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E