RH1014MJ#PBF [Linear]

Operational Amplifier, 4 Func, 900uV Offset-Max, CDIP14;


型号：	RH1014MJ#PBF
厂家：	Linear
描述：	Operational Amplifier, 4 Func, 900uV Offset-Max, CDIP14 放大器 CD
文件：	总18页 (文件大小：861K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

REVISION RECORD

REV

DESCRIPTION

DATE

06/12/96

05/12/97

INITIAL RELEASE



PAGE 2, ADDED PARAGRAPHS 3.2.1 AND 3.2.2 TO IDENTIFY “01” AND “02” AS PACKAGE

OPTIONS. CHANGED THE PART NUMBER FROM”RH1014MWB14 TO “RH1014MWB”.

PAGE 5, PARAGRAPH 5.6.10, NOTE – CORRECTED TYPO ON ITEM PARAGRAPH NUMBER

FROM”4.6.1” TO”5.6.1” AND “4.6.10” TO “5.6.10”.

PAGE 6 AND 7 – ADDED θja AND θjc , Tj MAX TO CASE OUTLINES. CHANGED THE “WB14”

TO “WB” ON FIGURE 2 CASE OUTLINE.



PAGE 8 – CHANGED TERMINAL CONNECTIONS DWG FOR “WB” PACKAGE, OPTION 2.

PAGE 4, PARAGRAPH 5.4.2, GROUP B INSPECTION WAS REDEFINED. PARAGRAPH 5.4.3,

GROUP D INSPECTION WAS REDEFINED.

10/08/97

11/25/97

PARAGRAPH 5.5.1, SOURCE INSPECTION WAS REDEFINED.

PAGE 8, FIGURE 4 – CORRECTED TYPO ON PIN 11 CONNECTION: SHOULD BE “V “.



PAGE 2, PARAGRAPH 3.2.2 – CHANGED PACKAGE TYPE FROM 14 LEAD BOTTOM BRAZED

FLATPACK TO 14 LEAD FLATPACK, GLASS SEAL.



PAGE 3, ADDED PARAGRAPH 3.8.1 AND 3.8.2

PAGE 7, FIGURE 2, PAGE 8, FIGURE 4, PAGE 11, FIGURE 7, PAGE 12, FIGURE 8, CHANGED

PACKAGE TYPE FROM 14 LEAD BOTTOM BRAZED FLATPACK TO 14 LEAD CERPAK.

PAGE 16, CHANGED VOS MIN DELTA LIMIT FROM –60 µV TO –200 µV, AND CHANGED VOS

MAX DELTA LIMIT FROM 60 µV TO 200 µV.

12/18/97

03/13/98



PAGE 2, WAS ADDED TO ACCOMMODATE REVISION RECORD.

PAGE 4, CORRECTED OPTION NUMBER FROM ”02” to “01”, PARA 3.8.1 AND CORRECTED

OPTION NUMBER FROM ”03” TO “02”, PARA 3.8.2.



PAGE 5, AMENDED PARAGRAPHS 4.1 AND 4.1.1. TAKING EXCEPTION TO ANALYSIS OF

CATASTROPHIC FAILURES.

PAGE 17, CHANGED DELTA LIMITS ON +IB FROM –3 AND 3 TO –4 AND 4.

CHANGED DELTA LIMITS ON –IB FROM –3 AND 3 TO –4 AND 4.

PAGE 8, CORRECTED PACKAGE OUTLINE DRAWING FOR FIGURE 2 CASE OUTLINE, (W)

FLAT PACK 14 LEAD GLASS SEAL.

05/15/98

01/11/99

09/29/99

11/17/99



PAGE 7, 8, FIGURE 1, 2, CHANGED θja AND θjc.

PAGE 3, PARAGRAPH 3.2.1, 3.2.2, HAD FIGURES 1 AND 2 REMOVED.

PAGE 4, PARAGRAPH 3.7 CHANGED VERBIAGE FROM “SPECIFIED IN TABLE III” TO “AND

AS SPECIFIED IN TABLE III HEREIN”, LINE 2. PARAGRAPH 3.9, ADDED “HEREIN” AFTER

“TABLE II”, LINE 2.



PAGE 5, PARAGRAPH 4.3, ADDED “HEREIN” AFTER “TABLE III”, LINE 2. PARAGRAPH 4.4.1,

ADDED “HEREIN” AFTER “TABLE II”, LINE 2.

CONTINUED ON NEXT PAGE…

REVISION RECORD AND DESCRIPTION CONTINUED ON NEXT PAGE.

CAUTION: ELECTROSTATIC DISCHARGE SENSITIVE PART

REVISION

INDEX

REVISION

INDEX

PAGE NO.

REVISION

PAGE NO.

REVISION

ORIG

DSGN

ENGR

MFG

LINEAR TECHNOLOGY CORPORATION

MILPITAS, CALIFORNIA

TITLE:

MICROCIRCUIT, LINEAR,

RH1014M, QUAD PRECISION

OPERATIONAL AMPLIFIER

SIZE

CAGE

CODE

64155

DRAWING

NUMBER

05-08-5014

PROG

REV

FUNCT

APPLICATION

SIGNOFFS

DATE CONTRACT:

FOR OFFICIAL USE ONLY

LINEAR TECHNOLOGY CORPORATION

Page 1 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

REVISION RECORD

REV

DESCRIPTION

DATE

PARAGRAPH 4.4.2.2, CHANGED VERBIAGE I LINE 1 FROM “ALL FOOTNOTES OF TABLE IIA OF

11/17/99

MIL-STD-883” TO “ALL FOOTNOTES PERTAINING TO TABLE IIA IN MIL-STD-883”.

PARAGRAPH 4.4.3.2, CHANGED VERBIAGE IN LINE 1 FROM “ALL FOOTNOTES OF TABLE IV OF

MIL-STD-883” TO “ALL FOOTNOTES PERTAINING TO TABLE IV IN MIL-STD-883”.

08/30/00

03/26/02



PAGE 8, CHANGED THETA JA TO θJA=160C/W AND THETA JC TO θJC=40C/W FROM

θJA=160C/W, θJC=40C/W.

CORRECTION TO REVISION K, REVISION RECORD. SHOULD BE PAGE 8, CHANGED THETA



JA TO θJA=160C/W AND THETA JC TO θJC=40C/W FROM θJA=165C/W, θJC=13C/W.



ADDED PAGE 3 WAS ADDED TO ACCOMMODATE REVISION RECORDS.

CONVERSION FROM WORD PERFECT TO MICROSOFT WORD. REDUCED SPEC PAGES TO

14 TOTAL.



PAGE 4:

PARAGRAPH 3.2.1 AND 3.2.2, ADDED THE WORD “OPTION” PRECEDING THE NUMBER OF EACH

LTC PART NUMBER FOR BETTER CUSTOMER ORDERING CONVENIENCE.



PAGE 5:

PARAGRAPH 3.6, CHANGED “TABLE IA” TO “TABLE II”.

PARAGRAPH 3.7, CHANGED “TABLE III” TO “TABLE IV”.

PARAGRAPHS 3.8.1 AND 3.8.2, ADDED THE PACKAGE TYPES AND OPTIONS AFTER EACH

FIGURE.

PARAGRAPH 3.9, CHANGED “TABLE II” TO “TABLE III”.

PARAGRAPHS 3.10.1 AND 3.10.2, ADDED THE PACKAGE TYPES AFTER EACH FIGURE.

PARAGRAPHS 3.10.3, REMOVED REFERENCE TO GOLD PLATED (WB) PACKAGE.

PARAGRAPH 3.11.1 WAS CHANGED FROM “…dosage rate of approximately 20 Rads per

second” TO “…dosage rate of less than or equal to 10 Rads per second”.



PAGE 6:

PARAGRAPHS 4.1 THROUGH 4.4.2.1 CHANGES WERE DONE TO CLARIFY GROUP SAMPLING.



PAGE 7:

PARAGRAPH 4.4.3 CHANGE WAS DONE TO CLARIFY GROUP SAMPLING.

PARAGRAPHS 4.5 THROUGH 4.5.2, CHANGED PARAGRAPH NUMBERS FROM “5.Ø” TO “4.5”.

PARAGRAPHS 4.6 THROUGH 4.6.10, CHANGED PARAGRAPH NUMBERS FROM “6.Ø” TO “4.6

THROUGH “4.6.10”

PARAGRAPHS 4.6.2 THROUGH 4.6.4 WERE RE-WRITTEN. THESE DATA PROVIDED, AND DATA

AVAILABLE.

PARAGRAPH 4.6.10 NOTE, ADDED FURTHER EXPLANATION OF MINIMUM DELIVERED DATA.

LINEAR TECHNOLOGY CORPORATION

Page 2 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

REVISION RECORD

REV

DESCRIPTION

DATE

3/26/02



PARAGRAPH 5.Ø CHANGED PARAGRAPH NUMBER FROM “7.Ø” TO “5.Ø”.

PAGES 8 THROUGH 15, ALL FIGURE TITLES CHANGED TO HAVE DEVICE OPTIONS AND

PACKAGE TYPES AT TOP OF PAGE, AND HAVE ALL FIGURES AT BOTTOM OF PAGE.



PAGE 12, NOTE 2 WAS CHANGED FROM 171C TO +152C, NOTE 3 WAS CHANGED FROM

150C TO +125C, NOTE 4 HAD A FREQUENCY LIMIT ADDED, NOTES 5 AND 6 WERE

DELETED AND REPLACE WITH A NEW NOTE 5.



PAGES 16 THROUGH 18, SCANNED DIRECTLY FROM DATA SHEET.

PAGE 1:

5/30/02



CORRECTED THE CAGE CODE NUMBER FROM 94155 TO 64155.

PAGE 9:



CORRECTED OPTION 2, FIGURE 2 HEADER, CASE OUTLINE, FROM W10 GLASS SEALED

FLATPACK / 10 LEADS CASE OUTLINE TO W14 GLASS SEALED FLATPACK / 14 LEADS CASE

OUTLINE.

PAGE 10:



CORRECTED OPTION 2, FIGURE 4, TERMINAL CONNECTION, FROM WB PACKAGE 14-

LEAD METAL SEALED BOTTOM BRAZED TO W PACKAGE 14 LEAD FLATPACK GLASS

SEALED.

PAGE 5:

3/16/05

12/10/07

05/01/08

02/12/09

03/08/12



CHANGED INITIAL RATE OF RADS TO 240 RADS/SEC.

PAGE 6, CHANGED IN BOTH PARAGRAPHS 4.2, 4.3 IN CONJUNCTION TO 3.3 CHANGED

TO 3.4 AND PARAGRAPH 4.3 CHANGED 3.1.1 TO 3.1 AND 3.2.1 TO 3.1.1

PAGE 5, PARAGRAPH 3.103 CHANGED TO ALLOY 42 PACKAGE REQUIREMENT.

PARAGRAPH 3.11.1 CHANGED VERBIAGE.

PAGE 5, ADDED PARAGRAPH 3.10 FOR 60 TEMP. CYCLES AT EOL. REST OF THE

PARAGRAPHS WERE RE-NUMBERED.



PAGE 12, CORRECTED BURN-IN NEGATAIVE VOLTAGE FROM V1 TO V2.

Changed the +I_Band -I_B‘Max Endpoint Limit’ from 0 to +30 on page 18.

LINEAR TECHNOLOGY CORPORATION

Page 3 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

1.0

SCOPE:

1.1

This specification defines the performance and test requirements for a microcircuit processed to a space

level manufacturing flow.

2.0

APPLICABLE DOCUMENTS:

2.1 Government Specifications and Standards: the following documents listed in the Department of Defense

Index of Specifications and Standards, of the issue in effect on the date of solicitation, form a part of this

specification to the extent specified herein.

SPECIFICATIONS:

MIL-PRF-38535

MIL-STD-883

MIL-STD-1835

Integrated Circuits (Microcircuits) Manufacturing, General Specification for

Test Method and Procedures for Microcircuits

Microcircuits Case Outlines

2.2

Order of Precedence: In the event of a conflict between the documents referenced herein and the contents

of this specification, the order of precedence shall be this specification, MIL-PRF-38535 and other

referenced specifications.

3.0

REQUIREMENTS:

3.1

3.2

General Description: This specification details the requirements for the RH1014, Operational Amplifier,

processed to space level manufacturing flow.

Part Number:

3.2.1 Option 1 – RH1014MJ (CERDIP, 14 LEAD)

3.2.2 Option 2 – RH1014MW (FLATPACK, GLASS SEAL, 14 LEAD)

Part Marking Includes:

3.3

3.3.1 LTC Logo

3.3.2 LTC Part Number (See Paragraph 3.2)

3.3.3 Date Code

3.3.4 Serial Number

3.3.5 ESD Identifier per MIL-PRF-38535, Appendix A

LINEAR TECHNOLOGY CORPORATION

Page 4 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

3.4

The Absolute Maximum Ratings:

Supply Voltage

Differential Input Voltage

Input Voltage

+22V

+30V

Equal to Positive Supply Voltage

5V Below Negative Supply Voltage

Output Short Circuit Duration 1/

Operating Temperature Range

Storage Temperature Range

Indefinite

-55C to 125C

-65C to 150C

300C

Lead Temperature (Soldering, 10 sec.)

1/ Parameter is guaranteed by design, characterization, or correlation to other

tested parameters.

3.5

3.6

Electrostatic discharge sensitivity, ESDS, shall be Class 1.

Electrical Performance Characteristics: The electrical performance characteristics shall be as specified in

Table I and Table II.

3.7

3.8

Electrical Test Requirements: Screening requirements shall be in accordance with 4.1 herein,

MIL-STD-883, Method 5004, and as specified in Table IV herein.

Burn-In Requirement:

3.8.1

3.8.2

Option 1 (Ceramic Dip) Static Burn-In, Figure 5; Dynamic Burn-In, Figure 6.

Option 2 (Glass Sealed Flatpack) : Static Burn-In, Figure 7; Dynamic Burn-In, Figure 8.

3.9

Delta Limit Requirement: Delta limit parameters are specified in Table III herein, are calculated after each

burn-in, and the delta rejects are included in the PDA calculation.

3.10

3.11

Part Number Option 2: The manufacturer performs 60 Temperature Cycles per MIL-STD-883, TM1010,

Condition C at end of line testing.

Design, Construction, and Physical Dimensions: Detail design, construction, physical dimensions, and

electrical requirements shall be specified herein.

3.11.1

3.11.2

3.11.3

Mechanical / Packaging Requirements: Case outlines and dimensions are in accordance with

Figure 1 (Ceramic Dip/14 Leads) and Figure 2 (Glass Sealed Flatpack/14 Leads).

Terminal Connections: The terminal connections shall be as specified in Figure 3 (Ceramic

Dip/14 Leads) and Figure 4 (Glass Sealed Flatpack/14 Leads).

Lead Material and Finish: The lead material shall be Alloy 42 for option 1, 2. The lead finishes

shall be hot solder dip (Finish letter A) in accordance with MIL-PRF-38535.

3.12

Radiation Hardness Assurance (RHA):

3.12.1 The manufacturer shall perform a lot sample test as an internal process monitor for total dose

radiation tolerance. The sample test is performed with MIL-STD-883 TM1019 Condition A as

a guideline.

LINEAR TECHNOLOGY CORPORATION

Page 5 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

3.12.2

For guaranteed radiation performance to MIL-STD-883, Method 1019, total dose irradiation,

the manufacturer will provide certified RAD testing and report through an independent test

laboratory when required as a customer purchase order line item.

3.12.3

Total dose bias circuit is specified in Figure 9.

3.13

3.14

Wafer Lot Acceptance: Wafer lot acceptance shall be in accordance with MIL-PRF-38535, Appendix A,

except for the following: Topside glassivation thickness shall be a minimum of 4KÅ.

Wafer Lot Acceptance Report: SEM is performed per MIL-STD-883, Method 2018 and copies of SEM

photographs shall be supplied with the Wafer Lot Acceptance Report as part of a Space Data Pack when

specified as a customer purchase order line item.

4.0

VERIFICATION (QUALITY ASSURANCE PROVISIONS)

4.1

4.2

4.3

Quality Assurance Provisions: Quality Assurance provisions shall be in accordance with MIL-PRF-38535.

Linear Technology is a QML certified company and all Rad Hard candidates are assembled on qualified

Class S manufacturing lines.

Sampling and Inspection: Sampling and Inspection shall be in accordance with MIL-STD-883, Method

5005 with QML allowed and TRB approved deviations in conjunction with paragraphs 3.1.1, 3.2.1, and

3.4 of the test method.

Screening: Screening requirements shall be in accordance with MIL-STD-883, Method 5004 with QML

allowed and TRB approved deviations in conjunction with paragraphs 3.1, 3.1.1, and 3.4 of the test

method. Electrical testing shall be as specified in Table IV herein.

4.3.1 Analysis of catastrophic (open/short) failures from burn-in will be conducted only when a lot fails

the burn-in or re-burn-in PDA requirements.

4.4

Quality Conformance Inspection: Quality conformance inspection shall be in accordance with 4.2 and 4.3

herein and as follows:

4.4.1 Group A Inspection: Group A inspection shall be performed in accordance with 4.1 herein, per

MIL-STD-883, Method 5005, and specified in Table IV herein.

4.4.2 Group B Inspection: When purchased, a full Group B is performed on an inspection lot. As a

minimum, Subgroup B2 (Resistance to Solvents / Mark Permanency) and Subgroup B3

(Solderability) are performed prior to the first shipment from any inspection lot and Attributes

provided when a Full Space Data Pack is ordered. Subgroup B5 (Operating Life) is performed on

each wafer lot. This subgroup may or may not be from devices built in the same package style as

the current inspection lot. Attributes and variables data for this subgroup will be provided upon

request at no charge.

4.4.2.1 Group B, Subgroup 2c = 10%

Group B, Subgroup 3 = 10%

Group B, Subgroup 5 = *5%

(*per wafer or inspection lot

whichever is the larger quantity)

Group B, Subgroup 4 = 5%

Group B, Subgroup 6 = 15%

4.4.2.2 All footnotes pertaining to Table IIa in MIL-STD-883, Method 5005 apply. The quantity

(accept number) of all other subgroups are per MIL-STD-883, Method 5005, Table IIa.

LINEAR TECHNOLOGY CORPORATION

Page 6 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

4.4.3 Group D Inspection: When purchased, a full Group D is performed on an inspection lot. As a

minimum, periodic full Group D sampling is performed on each package family for each assembly

location every 26 weeks. A generic Group D Summary is provided when a full Space Data Pack is

ordered.

4.4.3.1 Group D, Subgroups 3, 4 and 5 = 15% each (Sample Size Series).

4.4.3.2 All footnotes pertaining to Table IV in MIL-STD-883, Method 5005 apply. The

quantity (accept number) or sample number and accept number of all other subgroups

are per MIL-STD-883, Method 5005, Table IV.

4.5

Source Inspection:

4.5.1 The manufacturer will coordinate Source Inspection at wafer lot acceptance and pre-seal internal

visual.

4.5.2 The procuring activity has the right to perform source inspection at the supplier’s facility prior to

shipment for each lot of deliverables when specified as a customer purchase order line item. This

may include wafer lot acceptance and final data review.

4.6

Deliverable Data: Deliverable data that will ship with devices when a Space Data Pack is ordered:

4.6.1 Lot Serial Number Sheets identifying all devices accepted through final inspection by serial

number.

4.6.2 100% attributes (completed lot specific traveler; includes Group A Summary)

4.6.3 Burn-In Variables Data and Deltas (if applicable)

4.6.4 Group B2, B3, and B5 Attributes (Variables data, if performed on lot shipping)

4.6.5 Generic Group D data (4.4.3 herein)

4.6.6 SEM photographs (3.13 herein)

4.6.7 Wafer Lot Acceptance Report (3.13 herein)

4.6.8 X-Ray Negatives and Radiographic Report

4.6.9 A copy of outside test laboratory radiation report if ordered

4.6.10 Certificate of Conformance certifying that the devices meet all the requirements of this

specification and have successfully completed the mandatory tests and inspections herein.

Note: Items 4.6.1 and 4.6.10 will be delivered as a minimum, with each shipment. This is noted

on the Purchase Order Review Form as “No Charge Data”.

5.0

Packaging Requirements: Packaging shall be in accordance with Appendix A of MIL-PRF-38535. All devices

shall be packaged in conductive material or packaged in anti-static material with an external conductive field

shielding barrier.

LINEAR TECHNOLOGY CORPORATION

Page 7 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

DEVICE OPTION 1

CERAMIC DIP / 14 LEADS CASE OUTLINE

LEAD COUNT, N

D MAX

Ø.785 (19.939)

NOTE: 1. LEAD DIMENSIONS APPLY TO SOLDER DIP OR TIN PLATE LEADS.

2. THIS DIMENSION ALLOWS FOR OFF-CENTER LID, MENISCUS, AND GLASS OVERRUN.

θja = 95C/W

θjc = 25C/W

Tj Max = 174C

FIGURE 1

LINEAR TECHNOLOGY CORPORATION

Page 8 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

DEVICE OPTION 2

W14, GLASS SEALED FLATPACK / 14 LEADS CASE OUTLINE

NOTE: 1. THIS DIMENSION ALLOWS FOR OFF-CENTER

LID, MENISCUS AND GLASS OVER RUN.

NOTE: 2. INCREASE DIMENSION BY 0.003 INCH WHEN

LEAD FINISH IS APPLIED (SOLDER DIPPED).

θja = +160C/W

θjc = +40C/W

FIGURE 2

LINEAR TECHNOLOGY CORPORATION

Page 9 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

TERMINAL CONNECTIONS

OPTION 1, CERAMIC DIP / 14 LEAD

FIGURE 3

OPTION 2, GLASS SEALED FLATPACK / 14 LEADS

FIGURE 4

LINEAR TECHNOLOGY CORPORATION

Page 10 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

STATIC BURN-IN CIRCUIT

OPTION 1, CERAMIC DIP / 14 LEADS

FIGURE 5

LINEAR TECHNOLOGY CORPORATION

Page 11 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

DYNAMIC BURN-IN CIRCUIT

OPTION 1, CERAMIC DIP / 14 LEADS

NOTES:

1. Unless otherwise specified, component tolerances shall be per

military specification.

2. T = +152C maximum

3. T = +125C.

4. Burn-in Voltages: V1 = +20V to +22V

V2 = -20V to –22V

5. R = 715

FIGURE 6

LINEAR TECHNOLOGY CORPORATION

Page 12 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

STATIC BURN-IN CIRCUIT

OPTION 2, FLATPACK, GLASS SEAL / 14 LEADS

FIGURE 7

LINEAR TECHNOLOGY CORPORATION

Page 13 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

DYNAMIC BURN-IN CIRCUIT

OPTION 2, FLATPACK, GLASS SEAL / 14 LEADS

FIGURE 8

LINEAR TECHNOLOGY CORPORATION

Page 14 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

TOTAL DOSE BIAS CIRCUIT

FIGURE 9

LINEAR TECHNOLOGY CORPORATION

Page 15 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

TABLE I: ELECTRICAL CHARACTERISTICS (PRE-IRRADIATION)

See Applicable notes on next page.

LINEAR TECHNOLOGY CORPORATION

Page 16 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

TABLE II: ELECTRICAL CHARACTERISTICS (POST-IRRADIATION)

LINEAR TECHNOLOGY CORPORATION

Page 17 of 18

SPEC NO. 05-08-5014 REV. U

RH1014M, QUAD PRECISION OPERATIONAL AMPLIFIER

TABLE III: POST BURN-IN ENDPOINTS AND DELTA LIMIT REQUIREMENTS

T = 25C, V = +15V, V = 0V unless otherwise noted

ENDPOINT LIMIT

DELTA

PARAMETER

MIN

MAX

MIN

-200

MAX

UNITS

µV

-300

300

200

-30

-4

+30

-I

TABLE IV: ELECTRICAL TEST REQUIREMENTS

LINEAR TECHNOLOGY CORPORATION

Page 18 of 18

RH1014MJ#PBF [Linear]

相关型号：

RH1014MW

RH1014MW#PBF

RH1014MWB

RH1014MWB#PBF

RH1016

RH1016000JS03

RH1016001JS03

RH10160R0JS03

RH1016K00JS03

RH1016M

RH1016R00JS03

RH101A