120957-2 [MACOM]
Solutions for AdvancedTCA, AdvancedTCA 300, MicroTCA, and AdvancedMC Standards;
| 型号： | 120957-2 |
| 厂家： | 
Tyco Electronics |
| 描述： | Solutions for AdvancedTCA, AdvancedTCA 300, MicroTCA, and AdvancedMC Standards 连接器 |
| 文件： | 总32页 (文件大小：2915K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Solutions for AdvancedTCA,
AdvancedTCA 300, MicroTCA,
and AdvancedMC Standards
RoHS
Ready
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Introduction
Solutions For
AdvancedTCA
Why are AdvancedTCA
and MicroTCA Standards
Important?
• Radio Network Controllers
(RNC)
Hardware designers,
• Serving Gateway Support
Node (SGSN)
particularly those working
on blades or chassis, are
currently faced with huge
challenges. The needs of
the communications net-
work infrastructure and next
generation communication
applications are rapidly
changing, and cannot be
served by existing propri-
etary solutions.
AdvancedTCA and
MicroTCA provide a means
for the telecommunications
equipment market to take
advantage of standardized,
off-the-shelf hardware
• Gateway GPRS Support
Node (GGSN)
• Home Location Register
(HLR)
(enabling differentiation
through application-layer
and system-level software
rather than hardware).
• IP Multimedia Subsystem
(IMS) Servers
• Media and Application
Servers
• Shorter time to market
• Increased vendor choice
• Increased flexibility
• Media Gateways and Soft
Switches
Therefore AdvancedTCA
(Advanced Telecommuni-
cations Computing
Wireline Networking
Equipment
Architecture), MicroTCA
(Micro Telecommunications
Computing Architecture) and
AdvancedMC (Advanced
Mezzanine Card) open
industry standards have
been developed by PICMG
to place a high priority on
cost effectiveness while
attempting to support a
variety of potential future
technologies.
Need more information?
• Multiple switch fabrics
supported
Call Technical Support at the
numbers listed below.
• DSLAMs
• User defined I/O
• Multi-service switches
• Media servers
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with:
I Technical Support
I Catalogs
I Technical Documents
I Product Samples
I Tyco Electronics
Authorized Distributor
Locations
• Lower cost
(Acquisition CapEx/OpEx)
• Blade servers
Examples of Telecom
& Network Equipment
Manufacturers’ Related
AdvancedTCA and
MicroTCA Applications &
Systems
• VOIP Session Controllers
Fiber Optic Networking
Equipment
This new standard is
also supported by
Wireless Infrastructure
Equipment
Tyco Electronics, which
shows the full range of
AdvancedTCA, MicroTCA
and AdvancedMC compliant
components that can be
offered for the wide area of
applications within telecom-
munication as well as data
communication.
• Base Stations
3G (IMT-2000)
WCDMA
CDMA2000
TD-SCDMA
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
2
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Introduction (Continued)
What Is AdvancedTCA?
What Is
What Is MicroTCA?
AdvancedTCA300?
AdvancedTCA is an open
industry standard, devel-
oped by PICMG 3.0, to cre-
ate a new blade (board)
and chassis (shelf) form
factor, tailored to meet the
needs of the rapidly chang-
ing communications net-
work infrastructure, and
next generation communi-
cation applications, which
cannot be served by exist-
ing proprietary solutions.
This architecture places
high priority on cost effec-
tiveness versus attempting
to support a variety of
The architecture is opti-
mized around connectivity
requirements of signaling
and media gateways, while
MicroTCA is complementary
to AdvancedTCA, but is
optimized for smaller scale
and more price
AdvancedTCA300 is an
AdvancedTCA based
equipment platform, but
also providing headroom for compliant with the ANSI and sensitive applications. The
higher performance com-
puting elements @ a
99.999% availability rate.
AdvancedTCA offers
a scalable backplane
environment that supports:
ETSI equipment practices
requiring 300 mm total depth,
front access included.
basic premise of MicroTCA
is to support mezzanine
boards, conform to the
AdvancedMC standard,
and connect to the back-
plane, eliminating the need
to use an additional carrier
board. Like AdvancedTCA,
the MicroTCA equipment
practice is a modular, open
standards based shelf level
platform. The MicroTCA
standard has not finished
completion yet.
• A variety of standard
and proprietary fabric
interfaces
What Is AdvancedMC?
• Robust system
management
The AdvancedMC standard,
also developed by PICMG,
defines the base-level
potential future technologies.
• Superior power and
cooling capabilities.
requirements for a wide-
range of high-speed mezza-
nine cards, optimized for, but
not limited to, AdvancedTCA
and MicroTCA carrier
While the specification is
founded on the require-
ments of the communica-
tions infrastructure, it is
extensible to a variety of
applications and environ-
ments where highly avail-
able, highly scalable, cost
effective and open architec-
ture modular solutions are
required.
Each board in AdvancedTCA
(up to 16 boards a shelf and
3 shelves a rack) may sup-
port up to 200 W in a single
slot. The power is supplied
to each board via redun-
dant -48 VDC feeds. Front
and rear cabling practice is
supported for standard 600
mm total depth cabinet
blades. AdvancedMC
defines a modular add-on
or “child” card that extends
the functionality of an
AdvancedTCA carrier
board. In an AdvancedTCA
equipment practice, the
AdvancedMC modules lie
parallel to and are integrated
onto the AdvancedTCA
carrier board. The
practice, prevalent in
Central Office facilities.
AdvancedMC cards can
also be equipped in
MicroTCA shelves.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
www.tycoelectronics.com/products/atca
3
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Table of Contents
Introduction to AdvancedTCA, MicroTCA, and AdvancedMC Standards . . . . . . . . . 2, 3
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
AdvancedTCA — Zone 1 Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors . . . . . . . . . . 7-9
AdvancedTCA — Zone 3 RTM Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications . . . . . . . . . . . . . . . . . . . 11
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3 . . . . . . . . . . . . . . 12
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors . . . . . . . . . . 13
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard . . . . . . . . . . . . . . . . . . . 14
AdvancedTCA — Guide Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
© Copyright 2007, 2006 and 2005 by
Tyco Electronics Corporation.
All International Rights Reserved.
AMP, Austin Lynx, CHIP COOLER,
ELCON, FUTUREBUS+, MINIPAK,
MRJ21, MULTI-BEAM XL, TE Logo,
Tyco Electronics, Z-PACK and
Z-PACK TinMan are trademarks.
Product Defined in MicroTCA Specification
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Vertical AdvancedMC Connector for MicroTCA Applications . . . . . . . . . . . . . . . . . . . . . 16
MINIPAK HD Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19
Product Compliant to xTCA or AdvancedMC Specifications
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards . . . . . . . . . . 20
Low Profile RJ45 Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules . . . . . . . . . . . . . . . . . . 22
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles . . . . . . . . . . . . 23
AdvancedTCA — Thermal Products & Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Low Profile DDR2 Connector for AdvancedTCA Standards . . . . . . . . . . . . . . . . . . . . . . 24
SO DIMM Connectors for AdvancedMC Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.0 mm Free Height (FH) (IEEE 1386) Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AdvancedTCA — Power Distribution & Management Modules . . . . . . . . . . . . . . . . 27, 28
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Web Site Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted
|materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
5 of 6 Compliant — A “ⅷ” symbol identifies these part
numbers. These products do not fully comply with the
European Union Directive 2002/95/EC because they contain
lead in solderable interfaces (they do not contain any of the
other five restricted substances above allowable limits).
However, these products may be suitable for use in RoHS
applications where there is an application-based exception for
lead in solders, such as the server, storage, or networking
infrastructure exemption.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
I Cross-Reference from
Non-compliant to Compliant
Products
I Ability to browse RoHS
Compliant Products in our
on-line catalog
I Downloadable Technical Data
Customer Information
Presentation
I More detailed information
regarding the definitions used above
RoHS
Customer
Support
Center
I So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
See inside back cover for Global
Contacts and phone numbers.
4
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
specified. Values in brackets
are U.S. equivalents.
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications
AdvancedTCA — Zone 1 Power Connectors
Tyco Electronics' AdvancedTCA Power Con-
nector is designed to meet or exceed the
PICMG 3.0, R2.0 (AdvancedTCA) specifica-
tion for Zone 1 connector requirements
including four levels of sequential mating to
provide proper system functionality during
live insertion or extraction of front boards.
Integrated lead-in on the injection molded
housing provides superior blind mate
capability and is fully intermateable with
competing connectors designed to meet the
AdvancedTCA specification for power con-
nectors.
www.tycoelectronics.com/products/atca
www.elconproducts.com
Catalog 1773096 / 1773095
Flyer 2-1773441-7
FEATURES:
• High conductivity, precision
formed contacts
• Selective plating in compliance
with RoHS requirements
• Precision formed compliant
terminations offer excellent reten-
tion to provide
connection
a
reliable
• Qualified to meet PICMG 3.0, R2.0
specification
AdvancedTCA Zone 1
Connector
Front Board Connector
Right Angle Header
Part Number 1766500-1
Backplane Connector
Vertical Receptacle
Part Number 1766501-1
Backplane Connector
Daughtercard Connector
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Note: Part Numbers are RoHS compliant.
Group Incorporated.
5
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA Zone 1
Connector
(Continued)
46.10
[1.815]
41.30
[1.626]
Front Board Connector
Right Angle,
Material and Finish
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Ref.
Max.
See Note 1
Max.
1
Compliant Press-fit
Part Number 1766500-1
(tin plated pcb tails)
Part Number 1766500-2
(tin-lead pcb tails)
21 17 13
33 30
28 25
27
20.90
[.823]
4.60 5.30
[.180] [.207]
Signal Pins — Copper alloy
32
Power Contacts — High conductivity
copper alloy, plated 0.00076 [.000030]
min. gold in mating area
Solder Tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
34 31
29 26 24 20 16
4
ⅷ
18.65
[.734]
Right Angle Plug, 22-Position,
Compliant Press-fit
Part Number 1766502-1
(tin plated pcb tails)
Part Number 1766502-2
(tin-lead pcb tails)
See Note 2
Notes:
1. Mounting Holes (Ø 2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
ⅷ
Backplane Connector
Material and Finish
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
46.10
[1.815]
22.20
[.874]
Ref.
Straight, Compliant Press-fit,
Part Number 1766501-1
(tin plated pcb tails)
See Note 2
1
28
27
30
31
13 17 21
25
Signal Pins — Copper alloy
33
34
20.90
[.823]
32
Max.
26
16 20 24
ⅷ
Part Number 1766501-2
(tin-lead pcb tails)
Power Contacts — High conductivity
copper alloy, plated 0.0076 [.000030]
min. gold in mating area
Solder tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated
29
4
Straight, 22-Position,
Compliant Press-fit
Part Number 1766503-1
(tin plated pcb tails)
Part Number 1766503-2
(tin-lead pcb tails)
5.30
[.207]
4.60
[.180]
See Note 1
Notes:
1. Mounting Holes (Ø2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
ⅷ
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant except: ⅷ Indicates “5 of 6 compliant” (lead in solderable interface only).
6
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Zone 2 Z-PACK HM-Zd High Speed Signal Connectors
Z-PACK HM-Zd product from
Tyco Electronics is the high-speed,
FEATURES
• Designed specifically for high-
speed differential applications
(3.125 Gb/s to 10+Gb/s)
Advanced Differential Fabric Connector
system specified by PICMG for use in
AdvancedTCA Zone 2. The coplanar appli-
cation version using the right angled male
and identical Zone 2 card connector (right
angled female), can be used in Zone 3. In
addition to the four-pair connector modules
specified for use in AdvancedTCA Zone 2,
the product line includes two-pair and three-
pair signal modules, coplanar connectors,
and high-speed cable assemblies for use in
Zone 3. A mezzanine style connector is also
available in a four-pair version.
• A modular connector system with
a standard module size of 25.00
[.984]
• Z-PACK HM-Zd product is an
extension of the Z-PACK 2 mm HM
product line
• Pin header and receptacle have
the exact same footprint to sim-
plify PC board layout
• Optimized footprint supports quad
routing techniques for improved
electrical performance, ease of
trace routing, and significant PCB
manufacturing cost reductions
www.tycoelectronics.com/products/atca
www.hmzd.tycoelectronics.com
Catalog 1773095
Flyer 1308658
• Designed to meet Telcordia
requirements
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors
Front Board Connector
4 Pair Right Angle Receptacle
Part Number 6469001-1
Backplane Connector
4 Pair Vertical Header
Part Number 6469002-1
Front Board Connector
Backplane Connector
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Note: Part Numbers are RoHS compliant.
Group Incorporated.
7
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
4 Pair Right Angle
Receptacle Assemblies
0.10
1.00
[.039
27.90
[1.098]
2.50 Ref.
[.098] Typ.
0.75
[.030]
Ref.
Ref.
.004
]
0.05
.002
]
0.08
.003
15.67
[.617
19.35
[.762
1.50 Ref.
[.059] Typ.
]
0.08
.003
]
21.35
[.841
2.20
[.087]
3.00 Ref.
[.118] Typ.
2.00
[.079]
3.68
[.145]
Ref.
Ref.
Top Surface of
Daughtercard
A
1.50 Ref.
[.059] Typ.
8.70
[.343]
Ref.
1.50 Ref.
[.059] Typ.
0.16
0.14
.006
10.70
[.421
17.20
[.677
.006
]
]
1
All Plated
Thru Holes
0.20
1.50
[.059
1
PCB Hole Dim.
.008
]
0.025
0.05
0.0125
.0010
]
Drilled Hole = 0.7000
Finished Hole = 0.60
Cu Thickness = 0.375
[.02756
[.024
[.0148
[.0003
.002
]
.00049
]
0.003
.0001
]
SnPb Thickness = 0.007
1.50
[.059]
Typ.
2.50
Typ.
Note: For finishes other than
[.098]
tin-lead, reference Application
Specification 114-13059.
9 x 2.50 [.098] =
22.50 [.886]
Recommended PC Board Layout
Daughter Board, Component Side Shown
Application Tooling
Repair
Module
Length
(Dim. A)
Column
Part Number
Insertion
Grounds
Signals
Count
Housing
Chiclet
Removal
Receptacle
91347-1
91347-3
91347-2
91347-4
Removal
25.00
.984
16469001-11
6469286-1
6469294-1
6469061-1
10
12
15
20
80
96
40
48
60
80
1583224-1
1583248-1
1583248-1
1583248-1
1583248-1
30.00
1.181
1583224-2
1583224-3
1583224-4
37.50
1.476
120
160
50.00
1.969
1 AdvancedTCA Zone 2 Daughtercard Connector.
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
8
Catalog 3-1773445-8
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 6-07
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA Zone 2
Z-PACK HM-Zd High Speed
Signal Connectors (Continued)
2.50
[.098]
Ref.
Typ.
2.50
[.098]
Ref.
4 Pair
Vertical Pin Header
Assemblies
1.50 Ref.
[.059] Typ.
5.675
[.223]
Ref.
23.43
[.922]
Max.
3.00 Ref.
[.118] Typ.
+ 0.08
– 0.20
+ .003
– .008
19.65
[.774
]
Ref.
Typ.
1.50
[.059]
0.75
Ref.
0.05
.002
6.35
[.250]
Ref.
2.95
[.116
[.030]
]
A
0.08
.003
13.40
[.528
]
9 x 2.50 [.098] =
22.50 [.886]
2.50
Typ.
[.098]
1
PCB Hole Dim.
1.50
[.059]
0.025
0.05
0.0125
.0010
]
Typ.
Drilled Hole = 0.7000
Finished Hole = 0.60
Cu Thickness = 0.375
[.02756
[.024
[.0148
[.0003
.002
]
.00049
]
0.003
.0001
]
SnPb Thickness = 0.007
1
Note: For finishes other than
All Plated
Thru Holes
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Backplane Component Side Shown
Application Tooling
Repair
Mating
Pin
Length
Module
Length
(Dim. A)
Part
Number
Tail
Length
Column
Count
Insertion
Pin
Header
Signals
Grounds
Pin
Housing
Removal
Pin
Insertion
Removal
2.50
5.30
25.00
16469002-11
26469046-12
6469074-1
6469287-1
6469296-1
6469062-1
6469099-1
10
10
10
12
15
20
20
80
80
40
40
40
48
60
80
80
91349-1
91349-1
91349-1
91349-3
91349-2
91349-4
91349-4
1583237-1
1583237-1
1583237-1
1583237-1
1583237-1
1583237-1
1583237-1
1583220-1
1583220-1
1583220-1
1583220-1
1583220-1
1583220-1
1583220-1
1583255-1
.098
.209
.984
2.50
.098
5.30
.209
25.00
.984
1583255-1
1583255-1
1583255-1
1583255-1
1583255-1
1583255-1
1.80
.071
5.30
.209
25.00
.984
80
2.50
.098
5.30
.209
30.00
1.181
96
2.50
.098
5.30
.209
37.50
1.476
120
160
160
2.50
.098
5.30
.209
50.00
1.969
1.80
.071
5.30
.209
50.00
1.969
1 AdvancedTCA Zone 2 Backplane Connector.
2 Shallow Wall for Daughtercards thicker than 3.50 [.138].
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
9
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Z-PACK HM-Zd RTM Board Connector for AdvancedTCA Zone 3 Standard
AdvancedTCA Zone 3
Z-PACK HM-Zd
High Speed, Co-Planar
RTM Board Connector
4 Pair Right Angle Header
Part Number 6469048-1
Part Number 6469375-1
Front Board Connector
4 Pair Right Angle
Receptacle
Part Number 6469001-1
(see page 8)
4 Pair Right Angle
Pin Header Assemblies
2.50 Ref.
[.098] Typ.
34.55
[1.360]
1.65
[.065]
Ref.
Typ.
17.68
[.696]
Ref.
17.32
[.682]
Ref.
19.6
[.77
1.50 Ref.
[.059] Typ.
23.35
[.919]
2.20
[.087]
Ref.
Ref.
3.00 Ref.
[.118] Typ.
2.00
[.079]
Ref.
Top Surface of
Daughtercard
5.30
[.209]
Ref.
5.675
[.223]
A
Ref.
1.50 Ref.
[.059] Typ.
6.35
1.50 Ref.
[.059] Typ.
Ref.
[.250]
1
10.45
[.411]
6.90
Ref.
17.20
[.677]
Ref.
Ref.
All Plated
Thru Holes
[.272]
0.20
.008
1.50
[.059
]
1
PCB Hole Dim.
1.50
[.059]
0.025
.0010
]
Typ.
Drilled Hole = 0.7000
Finished Hole = 0.60
Cu Thickness = 0.375
[.02756
0.05
0.0125
.002
2.50
Typ.
[.024
]
.00049
]
[.098]
[.0148
[.0003
9 x 2.50 [.098] =
22.50 [.886]
0.003
.0001
]
SnPb Thickness = 0.007
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Component Side Shown
Application Tooling
Repair
Mating
Module
Length
(Dim. A)
Part
Number
Tail
Length
Column
Count
Insertion
Pin
Header
Pin
Signals
Grounds
Housing
Chiclet
Removal
Length
Removal
2.20
5.30
25.00
16469048-1
16469375-1
10
12
80
96
40
48
91378-1
91378-3
1804174-1
1804177-1
.087
.209
.984
2.20
.087
5.30
.209
30.00
1.181
1804174-1
1804177-1
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
10
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Co-Planar UPM for AdvancedTCA Zone 3 Power Applications
The Co-Planar Universal Power Module
(UPM) is specifically designed to meet the
need of connecting two printed circuit
boards on the same plane. The UPM con-
nector features hot-pluggable, 16 Amp
power industry proven contacts and have
three sequencing levels.
FEATURES
• Hot-Pluggable contact design
• 16 Amp per contact (on 4-position)
• 250 cycle durability
• Touch-safe receptacle
Right Angle Receptacle
No. of
Circuit
Positions
Right-Angle
High Power 16 Amps/
Contact Part Numbers
3
4
5
6
7
8
9
120943-1
120943-2
120943-3
120943-4
120943-5
120943-6
120943-7
Right Angle Plug
Number of Dimension
High Power 16 Amps/
Contact Sequence* Pattern
Part Number
Positions
L
M,M,M
M,L,M
5-5223961-1
5-5223963-1
**
12.00
.472
3
**
L,L,L,L
120954-1
120954-2
**
15.00
.591
4
5
6
L,M,S,S
**
L,L,L,L,L
M,M,L,M,M
**
120955-1
120955-2
**
18.00
.709
L,L,L,L,L,L
L,M,S,S,S,S
**
120956-1
120956-2
**
21.00
.827
L,L,L,L,L,L,L
L,S,S,L,S,S,L
L,L,L,L,L,L,L,L
L,M,S,S,S,S,S,S
120957-1
120957-2
120958-1
120958-2
24.00
7
8
.945
27.00
1.063
*Sequencing Reads left-to-right along mating face.
L (long) = 10.90 [.429], M (medium) = 9.30 [.366], S [short] = 7.68 [.302]
**Other sequence patterns available. See on-line customer drawing.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Note: Part Numbers are RoHS compliant.
Group Incorporated.
11
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
Z-PACK TinMan Connectors for AdvancedTCA Standards — Zone 3
Tyco Electronics Z-PACK TinMan product is
a new high speed, 100-Ohm Impedance
matched connector with extreme signal
density. This connector can be pinned out
for lower speed signal ended lines and exists
in 3, 4, and 5 pair per column versions.
FEATURES:
• High speed: +10 Gbps
• High Density: 25 pair/cm [66
pairs/in]
• 3, 4, and 5 pair per column
versions (5 pair shown)
• Available with or without end walls
for pin protection
• Designed to meet Telcordia
requirements
0.05
.002
]
0.05
.002
]
Z-PACK TinMan Receptacles
15.35
[.604
31.81
[1.252
Dimensions
No. of Pairs
Columns
Part Number
Length
Width
31.81
15.35
8
16
8
1934226-1
1934229-1
1934222-1
1934225-1
1934218-1
1934221-1
1.25
.604
3
31.81
1.25
30.55
1.203
31.81
1.25
15.35
.604
4
5
31.81
1.25
30.55
1.203
16
8
31.81
1.25
15.35
.604
31.81
1.25
30.55
1.203
16
Z-PACK TinMan Headers
Dimensions
End
Walls
No. of Pairs Columns
Part Number
Length
Width
31.81
15.35
1469974-1
1469977-1
1934034-1
1934037-1
1469793-1
1469795-1
1934026-1
1934029-1
1469735-1
1469737-1
1934018-1
1934021-1
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
1.25
.604
8
31.81
1.25
18.05
.710
3
31.81
1.25
30.55
1.203
16
31.81
1.25
33.25
1.31
31.81
1.25
15.35
.604
8
31.81
1.25
18.05
.710
4
31.81
1.25
30.55
1.203
16
31.81
1.25
33.25
1.31
31.81
1.25
15.35
.604
8
31.81
1.25
18.05
.710
5
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
31.81
1.25
30.55
1.203
16
31.81
1.25
33.25
1.31
Note: Part Numbers are RoHS compliant.
12
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Advanced Mezzanine Card (AdvancedMC) Connectors
Tyco Electronics is developing an
AdvancedMC connector designed to meet
the PICMG AdvancedMC specification for
use with AdvancedTCA carrier boards and
other related applications. The AdvancedMC
product family from Tyco Electronics will
include single-part Z-Pluggable connectors
in Extended (B+ and A+B+) styles.
www.tycoelectronics.com/products/atca
Product Specification
108-2277
Application Specification
114-13181
AdvancedMC Connector, Style B+
Part Number 1367703-X
FEATURES
0.05
71.50
[2.815
+0.
.065
0[.26
13.70
[.539]
Max.
• B+ style available now
• A+B+ styles planned
–.010
+0.
.002
]
]
–.40
0.05
65.15
[2.565
0.05
0.05
.002
4.10
[.161
.002
]
3.90
[.154
.002
]
]
– Targeted for high-speed differ-
ential applications (3.125 Gb/s
to 10+ Gb/s):
Housing
– Precision formed compliant pin
reduces stub effect and offers
excellent retention to provide a
reliable connect
0.08
.003
0.05
.002
]
1.90
[.075
21.85
[.860
]
• Suitable for assembly processes
using flat-rock tooling
6.00
[.236]
2 Plcs.
Insert, Threaded,
2 Plcs., Optional
Contact
0.05
.002
4.10
[.161
]
+ 0.00
– 0.10
+ .000
– .004
0.05
71.50
[2.815
0.65
.002
]
13.70
[.539]
Max.
[.026
]
0.05
65.15
[2.565
0.05
.002
.002
]
3.90
[.154
0.05
.002
4.10
[.161
]
Housing
]
0.08
.003
0.05
.002
1.90
[.075
21.85
[.860
]
]
6.00
[.236]
2 Plcs.
Insert, Threaded,
2 Plcs., Optional
Contact
Optional
Pegs
5.80
[.228]
2 Plcs.
14.00
[.551]
Ref.
Part Number
Plating
SnPb
Sn
Inserts
No
Pegs
No
No
ⅷ
1367703-1
ⅷ
1367703-2
No
ⅷ
1-1367703-1
SnPb
Sn
Yes
Yes
No
No
ⅷ
1-1367703-2
No
ⅷ
2-1367703-1
SnPb
Sn
Yes
Yes
Yes
Yes
ⅷ
2-1367703-2
No
ⅷ
3-1367703-1
SnPb
Sn
Yes
Yes
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
ⅷ
3-1367703-2
Note: Part Numbers are RoHS compliant except: ⅷ Indicates “5 of 6 compliant”
(lead in solderable interface only).
13
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
MULTI-BEAM XL Connectors for AdvancedTCA 300 Standard
MULTI-BEAM XL product has recently been
specified as the Power Entry Module (PEM)
connector for use in AdvancedTCA 300
applications. This new MULTI-BEAM XL
connector is a blind-mateable board-to-board
power distribution connection system that
is designed to meet the AdvancedTCA 300
specification. This new addition to the
Tyco Electronics MULTI-BEAM XL product
line is selectively loaded and available with
press-fit or solder tail termination styles.
FEATURES:
• Meets the AdvancedTCA 300
Specification
• 55 Amp Single Power Contact,
4 Amp Single Signal Contact
• Solder or Press-Fit termination to
PCB
• Specially sequenced for the
AdvancedTCA Specification
PEM Connector
• Custom configurable modular
design
0.25
79.76
[3.140
.010
]
Right Angle Receptacle
For use on PEM
11.38
[.448]
Part Number 1888765-1
(Press-Fit Version)
Vertical Plug
For use on backplane
Part Number 1888766-1
(Press-Fit Version)
Backplane Connectors
14.58
[.574]
0.25
.010
79.76
[3.140
]
12.70
[.500]
Ref.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant.
14
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in AdvancedTCA/AdvancedTCA 300 Specifications (Continued)
AdvancedTCA — Guide Modules
Tyco Electronics AdvancedTCA Guide
Modules are available in various sizes and
configurations and are suitable for use in
a wide variety of applications including front
board, mid plane, backplane, and a Rear
Transition Module as specified in the
AdvancedTCA specification. The guide
hardware features improved locating
features to confirm guidance is maintained
across all component tolerances while the
dual-keyed pin configuration allows for
many different keying possibilities.
FEATURES:
• Configurations for front board and
backplane as well as midplane and
coplanar applications in the RTM
• Vertical and right angle pins to
support right angle and coplanar
board configurations
• Guide pins are available in short or
long lengths to accommodate var-
ious Tyco Electronics connectors
www.tycoelectronics.com/products/atca
Catalog 1773095
AdvancedTCA Guide/
Keying Modules
The AdvancedTCA Guide
Modules can be used in a
wide variety of applications.
For motherboard-to-
daughtercard applications
the vertical pin and right
angle socket are used.
rA1
A2 (RTM)
K1/K2
This popular configuration is
further supported by our
wide offering of available
keying positions. Each of
the two keyed guide pins
and guide sockets per mod-
ule can be produced
in a variety of different key
positions. For co-planar
applications, the right angle
guide pins are used along
with the right angle guide
sockets. Both vertical and
right angle guide pins are
available in short or long
sizes, to accommodate
being used with different
Tyco Electronics connectors.
rK1
A1
A2
AdvancedTCA
Name
AdvancedTCA
Location
Description
Part Number
Rear Alignment Post
rA1
rA1
rA1
Backplane
Backplane
Backplane
1469269-2
1469269-4
1469269-6
3.00 – 4.00 [.118 – .157] PCB Thickness
Rear Alignment Post
4.10 – 6.00 [.161 – .236] PCB Thickness
Rear Alignment Post
6.10 – 8.00 [.240 – .315] PCB Thickness
A2 (RTM)
K1/K2
K1/K2
rK1
Rear Transition Module
Front Board
Right Angle Male, Keyed
Right Angle Female, Keyed
Right Angle Female, Unkeyed Dummy
Right Angle Female
1-1469372-1
1-1469373-1
9-1469373-9
1469374-1
Front Board
Rear Transition
Backplane
A1
Vertical Male, Keyed, Short
Vertical Male, Keyed, Long
1-1469387-1
1-1469388-1
A2
Mid-Plane
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant.
15
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification
Vertical AdvancedMC Connector for MicroTCA Applications
FEATURES
• Press-fit connector per
MicroTCA.0 Specification
• 170 lines
• Connector designed so that
custom load patterns are easily
created
• Single overmolded wafer design
• Fully validated electrical models
available
Part Number 1469820-X
Part
Tail
Alignment
Post
Product Specification
Number
Plating
108-2254
1469820-1
1469820-2
1469820-3
1469820-4
Tin
No
Yes
No
Optional Holes
Used with
Application Specification
114-13180
Tin
Part Number
1469944-2
BSC
ⅷ
ⅷ
Tin-Lead
Tin-Lead
Yes
C
0.10
L of
2.40
[.094
2 Plcs.
.004
]
Card Slot
Position No. 170
Position No. 1
Position No. 1
0.05
.002
0.55
[.022
]
1.50
[.059]
Typ.
After Plating
31.22
[1.229]
C
L of
Card Slot
0.20
72.00
[2.835
69.30
[2.728]
58.50
[2.303]
.008
]
BSC
2.25
[.089]
4.175
[.1644]
0.20
[.008]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Optional
Alignment Post
Center Column
of Holes Are
Ground Positions
0.10
.004
7.40
[.291
1.35
]
[.053]
1.50
[.059]
6.00
[.236]
0.10
.004
]
5.80
[.228
0.10
.004
Note: Part Numbers are RoHS
compliant except: ⅷ Indicates
“5 of 6 compliant” (lead in
solderable interface only).
12.30
[.484
]
Measured to Bottom
of Card Slot
Recommended Mounting Holes
16
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
MINIPAK HD Power Connectors
The MINIPAK HD Connector is a 2-piece
board-to-board connector designed to meet
the PICMG MicroTCA specification. The
connector consists of 24 power contacts
and 72 high density signal contacts.
Application
Designed for a broad range of applications
in Telecom Edge and customer premise
equipment, CATV hardware, wireless base
stations and other communication equip-
ment manufactured to the MicroTCA
(PICMG AdvancedMC 1.0) specification.
Rugged contact design and post-plated 30
micro-inch gold plating provides long-term
reliability in demanding environments.
FEATURES:
• High Current Density
Electrical Characteristics
• 24 power contacts capable of
carrying 14.5 Amps per contact
when fully energized
Current Ratings — tested in
accordance with IEC 60512-5-2
Test 5a requirements:
Signal Contacts — .625 ampere each
Power Contacts —
11.625 ampere each (PICMG MicroTCA
R1.0 requirement)
14.5 ampere each (Tyco Electronics
MINIPAK HD performance)
• Industry proven UPM power
contacts
• Hot Plug contact design controls
arc during hot mate/un-mate
cycles
Dielectric Withstanding Voltage —
80 volts rms between differential pair
conductors, general purpose conductors,
and power conductors
• 3 Mating Levels:
1st — Power/Ground,
2nd — Power/Signal,
3rd — Short/Enable Signal
• Tin Plated (fully RoHS compliant)
or tin-lead (5 of 6 RoHS compli-
ant) pcb tails
Environmental Characteristics
Maximum Continuous Operating
Temperature — 100°C
Durability Rating — 250 cycles
Technical Documents
Tyco Electronics Product
Specification — 108-2253
PICMG Specification —
PICMG MicroTCA Standard
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
17
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
MINIPAK HD Power
Connectors (Continued)
0.10
Vertical Receptacle
Part Number 1469920-1
(tin-lead pcb tails)
23.30
[.917
.004
]
ⅷ
0.08
Ø 3.98
[.157
11.50
[.452]
.003
]
Part Number 1469920-2
(tin plated pcb tails)
Position 13
Position 1
The vertical connector
consists of 72 2 mm pin
and 24 UPM receptacle
contacts. The contacts
have compliant pin tails for
press-fit applications.
0.10
.004
39.30
[1.547
]
56.20
[2.213]
Ref.
22.00
[.866]
Ref.
5.50
[.217]
Ref.
13.50
[.531]
Ref.
2.00
[.079]
Sense Pin Location (1A)
0.08
.003
]
Ø 3.98
[.157
0.50 Ref.
[.020] 72 Plcs.
2.57
2.00
[.079]
0.40 Ref.
[.015] 72 Plcs.
[.101]
9.50
[.374]
11.12
[.438]
Ref.
Ref.
20.62
[.812]
2 Plcs.
1.00
[.039]
Typ. Chamfer
x 45°
5.50
[.217]
Ref.
To Centerline of Cavity
0.20
17.00
.008
[.670
2 Plcs.
]
7.81
[.307]
Ref.
0.05
.002
0.75
[.030
]
4.75
[.187]
Ref.
0.20
61.10
[2.406
.008
]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant except: ⅷ Indicates “5 of 6 compliant” (lead in solderable interface only).
18
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Defined in MicroTCA Specification (Continued)
23.60
[.929]
Ref.
Position 1
Position 13
MINIPAK HD Power
Connectors (Continued)
0.10
.004
39.60
[1.559
]
20.70
0.40 Ref. [.815]
Ref.
Right Angle Plug
Part Number 1469921-1
(solder tail)
1.50
[.060]
Ref. [.016] Typ.
Ground
Contacts
0.15
.006
]
22.12
[.871
Positions
P4 Thru P11
0.20
.008
2.55
[.100
Part Number 1469922-1
(press-fit)
]
3.00
[.118]
Ref.
35.50
[1.398]
Ref.
19.00
[.748]
ⅷ
Ref.
Part Number 1469922-2
Sense Pin
Location
(1A)
(press-fit, tin-lead pcb tails)
0.13
.005
]
10.90
[.429
The right angle connector
consists of 72 high density
signal pins and 24 right
angle UPM blades in a 2 x
12 configuration. There are
8 power blades that are
longer for first mate/break
last ground sequencing.
The right angle connectors
come in 2 piece tail varia-
tions, press-fit and solder.
0.10
.004
]
20.20
[.795
0.13
.005
9.30
[.366
0.10
.004
]
12.00
[.472
]
0.10
.004
]
17.40
[.685
Top Surface
of PCB Aligned With
18.62
[.733]
Ref.
3.37
Row B Contact C
Ref.
L
[.133]
Reference Back Plane Surface
11.50
[.453]
Ref.
Section A - A
0.10
11.85
[.467
.004
]
32.35
[1.274]
Ref.
29.50
[1.161]
15.15
[.600]
Ref.
Ref. Dim.
To Signal
Column A
Part Number 1469921-1
0.10
.004
]
19.12
[.753
23.60
[.929]
Ref.
Position 1
Position 13
0.10
.004
39.60
[1.559
]
20.70
Ref.
0.40 Ref. [.815]
Ref. [.016] Typ.
1.50
[.060]
Ground
Contacts
Positions
0.15
22.12
[.871
.006
]
0.20
.008
3.30
[.130
P4 Thru P11
]
3.00
[.118]
Ref.
35.50
[1.398]
Ref.
19.00
[.748]
Ref.
Sense Pin
Location
(1A)
0.13
.005
]
10.90
[.429
0.10
.004
]
20.20
[.795
0.13
.005
9.30
[.366
0.10
.004
]
12.00
[.472
]
0.10
.004
]
17.40
[.685
Top Surface
of PCB Aligned With
Row B Contact C
18.62
[.733]
Ref.
3.37
[.133]
Ref.
L
Reference Back Plane Surface
11.50
[.453]
Ref.
Note: Part Numbers are RoHS
compliant except: ⅷ Indicates
“5 of 6 compliant” (lead in
solderable interface only).
Section A - A
0.10
11.85
[.467
.004
]
32.35
[1.274]
Ref.
29.50
[1.161]
15.15
[.600]
Ref.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Ref. Dim.
To Signal
Column A
Part Number 1469922-1
0.10
.004
]
19.12
[.753
19
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications
Stacked RJ45 Modular Jacks for AdvancedTCA, AdvancedMC Standards
Tyco Electronics has released new stacked
RJ45 modular jacks designed to meet both
AdvancedTCA and AdvancedMC standards.
The offset has been designed to fit the
faceplate and board layout in AdvancedTCA
and full-size AdvancedMC modules, while
providing the port density of the stacked
configuration. These jacks are shielded
and include panel ground springs for EMI
containment. They are available in 2x1,
2x4, 2x6, and 2x8 configurations, with and
without LEDs, and are designed for GigE
performance.
www.tycoelectronics.com/products/atca
FEATURES
Catalog 82066
• Offset designed to meet both
AdvancedTCA and AdvancedMC
standards
• Category 5 Performance
• Available in 2x1, 2x4, 2x6, and 2x8
configurations
• Press-fit termination to the board
• Available with various LED options
LED #1
(Lower Port
Left Side)
LED #2
(Upper Port
Left Side)
LED #3
(Upper Port
Right Side)
LED #4
(Lower Port
Right Side)
Part Number
(3.27 mm Offset)
Ground
Clips
Shield Side
Ground Pins
Configuration
1888652-1
1888652-2
1888653-1
1888653-2
1888653-3
1888653-4
1888506-1
1888506-2
1888507-1
1888507-2
1888507-3
1888507-4
1888508-1
1888508-2
1888509-1
1888509-2
1888509-3
1888509-4
1888654-1
1888654-2
1888654-3
1888654-4
1888655-1
1888655-2
1888655-3
1888655-4
1888655-5
2x1
2x1
2x1
2x1
2x1
2x1
2x4
2x4
2x4
2x4
2x4
2x4
2x6
2x6
2x6
2x6
2x6
2x6
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
None
None
None
None
None
None
None
None
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Green
Green
Yellow
Green
None
Green
Green
Yellow
Green
None
Green
Green
Green
Yellow
None
Green
Green
Green
Yellow
None
Yes
Yes
Yes
No
None
None
None
None
Yes
No
Green
Green
Green
Green/Yellow
None
Green
Green
Green
Green/Yellow
None
Green
Green
Yellow
Green/Yellow
None
Green
Green
Yellow
Green/Yellow
None
Yes
No
Yes
No
None
None
None
None
Yes
No
Green
Green
Green
Green/Yellow
None
Green
Green
Green
Green/Yellow
None
Green
Green
Yellow
Green/Yellow
None
Green
Green
Yellow
Green/Yellow
None
Yes
No
Yes
No
None
None
None
None
No
Yes
Yes
No
None
None
None
None
Yes
Yes
No
None
None
None
None
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Yellow
Green
Green
Green
Green
Yellow
No
No
Yes
Yes
No
Yes
Yes
No
Yes
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
20
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Low Profile RJ45 Modular Jacks
To meet the requirements for I/O connectors
on AdvancedTCA and AdvancedMC cards,
Tyco Electronics has released new low
profile RJ45 modular jacks. The offset from
the board is designed such that it fits in
an AdvancedMC half height faceplate.
These jacks are shielded and include
panel ground springs for EMI containment.
They are available in single port and 1x4
configurations, with and without LEDs, and
are designed for GigE performance.
FEATURES
• Category 5e Performance
• Available in single port and 1x4
configurations
• Low profile meets half height
requirements. 4.20 mm above
PCB, 7.38 mm below PCB
• Press-fit termination to the board
• Available with various LED options
Part Number
1888250-1
1888250-2
1888250-3
1888250-4
1888251-1
1888251-2
1888251-3
1888251-4
Configuration
LED (Left)
Green
LED (Right)
Yellow
1x1
1x1
1x1
1x1
1x4
1x4
1x4
1x4
Green/Yellow
None
Green/Yellow
None
Green
Green
Green
Yellow
Green/Yellow
None
Green/Yellow
None
Green
Green
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
21
Catalog 3-1773445-8
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 6-07
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Front & Rear I/O Connectors – SFP Modules
The SFP (Small Form-Factor Pluggable)
supports hot swap of various types of fiber
optics and copper based transceivers into
host equipment. This allows the customer to
have a flexible change between different
protocols. The different applications are
Fiber Channel, Ethernet, and Infiniband.
SFP board cages exist in multiple versions
that fit AdvancedTCA systems.
FEATURES
• Products according to MSA
(Multi-Source Agreement)
• Uses 20 positions PT connector
• Hot Swappable
• Three stage sequencing
• Supports data-rates up to 5 Gbps
The one port cages are available in a
one piece design (press-fit or solder) and a
two piece design (press-fit, solder or SMT).
Ganged versions (available in 1x6; 1x4;
1x2) are available with or without light
pipes. The ganged product has the
option of integrated host connector.
Tyco Electronics is currently developing
stacked versions (2x4 as primary option)
that fit AdvancedTCA requirements.
• Chassis ground for pass through
EMI protection to 12.5 Gbps
• Accepts copper and fiber optic
transceivers
• Direct attach copper cable assem-
blies available with or without
active equalization.
www.tycoelectronics.com/product/atca
www.sfp.tycoelectronics.com
Catalog 1773408
Flyer 1654720 / 1654095 / 1773078
SFP Modules
Port
Configuration
Insertion
Style
Connector
Included
Height
Profile
Part Number
Stacked
1658628-1
1658629-1
1658894-1
Ganged
2x1
2x4
2x6
Press-fit
Press-fit
Press-fit
Yes
Yes
Yes
Low
Low
Low
1761014-1
1658744-1
1761015-1
Single
1x2
1x4
1x6
Press-fit
Press-fit
Press-fit
No
No
No
—
—
—
6367035-1
6367034-1
1489669-1
1489779-1
1x1
1x1
1x1
1x1
Solder Tail
Solder Tail
Press-fit
No
No
No
No
Standard
Standard
Standard
Standard
Press-fit
Note: Part Numbers are RoHS compliant.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Infiniband is a trademark of Infiniband
Trade Association.
22
Catalog 3-1773445-8
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 6-07
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Front & Rear I/O Connectors — MRJ21 Receptacles
Tyco Electronics’ MRJ21 receptacle is a
high density I/O interconnect. This high
density connector supports AdvancedMC
Mid-size and Full-size module face plates
and AdvancedTCA face plates. It can also
be used for Rear I/O via Rear Transition
Modules (RTMs), as well as in
FEATURES
• 1.5 to 3 times the port density
of stacked Mod Jacks (RJ45).
3 times the port density of RJ21
• Contact layout and footprint for
differential pairs creates reduced
cross-talk and built in compensa-
tion
AdvancedTCA Zone 3 applications.
The MRJ21 connector is fully shielded and
provides density savings for current 10/100
or GbE RJ45/RJ21 applications. The low
profile and narrow width design will allow
more ports to be packed into less space.
• Connector is designed to meet or
exceed Cat 5e cross-talk
• Fully shielded system to
control EMI (Electro-magnetic
Interference)
Tyco Electronics offers a full end-user
solution with cleaner cabling solutions over
RJ45s, and patch panels for plug-and-play
environment, including data centers and
zone cabled or open office environments.
• Robust die cast cable covers pro-
vide 45 degrees left or right cable
exit for ease of routing
• 1 mm pair spacing, 1.5 mm pair
to pair spacing
• Patch panels and cable manage-
ment solutions available
www.tycoelectronics.com/products/atca
MRJ21 PCB Receptacles (48-position)
Receptacle Screwlocks
Panel
PCB
Panel
Part Number
Part Number
1339381-1
1339381-2
Grounds
No
Termination
Solder
Thickness
1761482-1
1761482-2
1761482-4
< 1mm
Yes
Solder
> 1mm to
< 2mm
No
Press-Fit
Screwlocks sold separately
Note: Part Numbers are RoHS compliant.
AdvancedTCA — Thermal Products & Services
Thermal Interface Products are mandatory
FEATURES
for reducing the waste heat and cooling
• Tyco Electronics thermal solutions
the system in the most efficient way. Waste
heat reduces the silicon chip reliability and
performance. In addition to the products
Tyco Electronics is offering such as Heat
Sinks, Heat Pipes and CHIP COOLERs,
in all shapes and sizes, Tyco Electronics
offers state of the art Thermal Management
Services. Thermal Management is the
design practice of moving waste heat to
locations that do not affect the equipment or
overall device performance. Each Thermal
Product can be fully customized
provide optimum cooling for
active components like BGA (Ball
Grid Array), MCM modules, opti-
cal modules and power devices
• Compatible to most AdvancedTCA
connector form factors, low
profile solutions
• Off the shelf as well as customized
products
• Heat pipe technology in combin-
ation with passive heat sinks
• Advanced thermal conductive
polymer for weight and cost
reduction
to fulfill the specific requested system
cooling requirements.
www.tycoelectronics.com/products/atca
www.thermal.tycoelectronics.com
• Full CFD (Computational Fluid
Dynamics) simulation and analy-
sis, optimum Thermal design
Catalog 1309431
Flyer 1308225
numerical
and
analytical
approaches
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks
of PICMG-PCI Industrial Computer Manufacturers Group Incorporated.
23
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Low Profile DDR2 Connector for AdvancedTCA Standards
The new Tyco Electronics Low Profile DDR2
connector is designed for the main memory
requirements on the AdvancedTCA carrier
boards. Developed for use with a new
VLP (Very Low Profile) module from Micron
Technology, this connector meets the
AdvancedTCA height limitations on the
carrier board.
FEATURES
• Accepts new Micron Technology
VLP (Very Low Profile) DDR2
memory
specifically for the AdvancedTCA
carrier board
module
designed
• Special designed ejectors that
allow airflow to reach memory
module DRAMs for efficient
cooling
In addition, this connector offers a new
ejector design that allows airflow to reach
the memory module DRAMs for effective
cooling.
• Low module seating plane allows
for increased module space for
module components in a VLP
form factor
• Utilizes proven Tyco Electronics
DDR2 contact design for reliable
interface to the memory module
• Available in 3 solder tail lengths
and contact interface plating
options
Part Number 1888669-1
140.90
Max.
[5.547]
+ 0.05
– 0.08
+ .002
– .003
5.54
[.218]
Extractor Tower
1.45
0.05
1.30
Card Slot
Key
[.057
]
.002
[.051
]
7.54
[.297]
Main Body
6.85 Max. Component Height in
[.270] Extractor Shadow Area
1.90
[.075]
C
L of Connector
C
L of Alignment Key
9.00 Max.
[.354] Latch Open
8.15
[.321]
2 Plcs.
4.00
[.157]
3.55 Max.
[.140] Key Height
Ref.
21.00 Max.
[.827] 2 Plcs.
Retention
Barb
2.95 Max. PCB To
[.116] Card Slot Floor
0.30 Min.
[.012] 3 Plcs.
0.20
[.008]
Ref.
4.00 Max.
[.157] 3 Plcs.
0.36
[.014]
0.25
2.87
[.113
Ref.
.010
]
2.50 Min.
[.098] 3 Plcs.
73.00
[2.874]
65.00
[2.559]
For 1.60 [.063]
Thk. PCB
Ref.
Ref.
0.25
.010
3.38
[.133
]
For 2.36 [.093]
Thk. PCB
165.00 Max.
[6.496] Open Latch
0.25
4.20
[.165
145.00 Max.
[5.709] Latch Closed
.010
]
For 3.18 [.125]
Thk. PCB
142.00 Max.
[5.591] PCB Footprint
14.50 Min.
[.571] 2 Plcs.
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
21.00 Max.
[.821] 2 Plcs.
5.00 Min.
[.197] 2 Plcs.
Note: Part Numbers are RoHS
10.00 Min.
[.394] 2 Plcs.
compliant.
24
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
Small Outline Dual In-Line Memory Module (SO DIMM) for AdvancedMC Applications
The Small Outline Dual In-Line Memory
Module (SO DIMM) is the latest in the
Tyco Electronics DIMM product line and
was specifically designed to meet the
AdvancedMC Specification. The SO DIMM
has 200 positions in a dual row design,
and features gold flash solder tail contact
plating. Available in two heights, the SO
DIMM will fit any AdvancedMC Application.
FEATURES
• 200 positions
• Gold Flash Solder Tail Contact
Plating
Part Number
Stack Height
Keying Feature
5.20
.203
1981281-4
Reverse
5.20
1981276-4
1981287-4
1981284-4
Standard
Reverse
Standard
.203
9.20
.360
9.20
.360
Part Number 1981281-4
66.80
[2.611]
0.85
[.033]
1.35
[.053]
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
Note: Part Numbers are RoHS compliant.
25
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are U.S. equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
1.0 mm Free Height (FH) (IEEE 1386) Connectors
As a standard for adding local PCI or Sbus
performance to Futurebus+ and VMEbus
applications, IEEE 1386 offers new levels of
performance and packaging convenience
through the mezzanine architecture.
FEATURES:
• For board stacking applications
• High density packaging on
1.0 [.039] centerline spacing
Tyco Electronics makes it easier and more
productive to add an IEEE 1386 mezzanine
connector to your system. The surface-mount
parallel stacking connector features contacts
on a 1.0 [.039] pitch and is available in eight
stacking heights from 8 [.315] to 15 [.591]. Sizes
include the IEEE 1386 standard 64-position
version and an optional 84-position version.
• Available in standard 64-position
and optional 84-position sizes
• “Tape-and-reel” packaged per
EIA standards
• Board stacking heights available
from 8 [.315] to 15 [.591]
• Increased plastic clearance
eliminates stress to solder joints
during mating
Not only is the connector compatible with EIA-
700 AAAB — the connector standard for IEEE
1386 mezzanine connectors — it offers sev-
eral enhancements that make it easier to use
and more reliable. Increased plastic clear-
ance between mating connectors makes it
easier to align multiple connectors for mating,
thus eliminating stress to the solder joints dur-
ing engagement. Improved locating posts
allow fast, highly accurate hand placement of
connectors. The connectors are available with
vacuum covers for automated placement.
• Improved locating posts provide
accurate hand or robotic placement
• Meets EIA-700 AAAB specifica-
tions for IEEE 1386 applications
Receptacle Part Number
No. of
Positions
Height
30µ" Au Plating
w/ pickup cap
50µ" Au Plating
w/ pickup cap
5.37
.211
7.37
5120528-1
1-5120528-1
1-5120529-1
1-5120530-1
1-5120531-1
1-5120528-2
1-5120529-2
1-5120530-2
1-5120531-2
5120529-1
5120530-1
5120531-1
5120528-2
5120529-2
5120530-2
5120531-2
.290
8.37
.330
Performance Characteristics
Current Rating —
1.0 ampere per contact
Contact Resistance —
30 milliohms max. (initial)
Durability — tested to 100 mating
cycles min.
64
10.37
.408
5.37
.211
7.37
.290
8.37
.330
84
Product Specification
108-2246
10.37
.408
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.4 [.094] length assures optimum solder fillet regardless of
connector manufacturer.
1.0 mm FH (IEEE 1386)
Receptacles and Plugs
without Locating Posts,
1.0 [.039] Pitch
Plug Part Number
No. of
Height
30µ" Au Plating
w/ pickup cap
50µ" Au Plating
w/ pickup cap
Positions
6.35
8 [.315] thru 15 [.591]
Stacking Heights
5120532-1
5120533-1
5120534-1
5120532-2
5120533-2
5120534-2
1-5120532-1
1-5120533-1
1-5120534-1
1-5120532-2
1-5120533-2
1-5120534-2
.250
7.35
.289
8.35
.329
6.35
.250
7.35
.289
64
Material and Finish
Housing — Liquid crystal polymer,
black
Contacts — Phosphor bronze; duplex
plated 0.00076 [.000030] or .00127
[.00050] min. gold on contact area,
0.00381 [.000150] min. tin on solder
area, with entire contact underplated
0.00127 [.000050] min. nickel
84
8.35
.329
Notes: 1. Shorter solder lands may be used per EIA-700 AAAB. However,
the 2.7 [.106] length assures optimum solder fillet regardless of
connector manufacturer.
Vacuum Cover — Aluminum Alloy
Technical Documents
EIA-700 AAAB Specification
Application Specification
114-25045
AdvancedMC, AdvancedTCA, AdvancedTCA 300, MicroTCA and PICMG are trademarks of PICMG-PCI Industrial Computer
Manufacturers Group Incorporated.
Note: Part Numbers are RoHS compliant.
26
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Power Distribution & Management Modules
Tyco Electronics Power Systems introduces
the industry's first power input management
solution for AdvancedTCA boards. The
AdvancedTCA power input module (PIM)
is designed in collaboration with industry
leading AdvancedTCA board manufacturers
and provides innovative features and
compact design. PIM modules incorporate
all the features required by AdvancedTCA
specifications (PICMG 3.0) and enable
designers to save valuable board real estate
and reduce overall board cost and time to
market compared to discrete solutions.
FEATURES
• 200/300 W of power (per PICMG
3.0)
• Inrush control protection
• Integrated EMI filter designed to
meet CISPR Class B Limits
• Directive 2002/95/EC RoHS com-
pliant
• 8 W of Isolated auxiliary power
supply for IPMI (3.3 V or 5 V)
• O-Ring FETs for -48 V A&B feeds
• A/B feed loss alarm
A Complete Power Architecture
• Hot-swap control
PIM series along with Tyco Electronics’
isolated DC/DC and bus converters and
point of load modules, provide a complete
and low-cost power architectural solution
while complying with AdvancedTCA board
power requirements.
• 72 V charging voltage for holdup/
bulk capacitors
PIM
Yes
Discrete
Board level
Board level
Board level
> 100
PICMG 3.0 compliant
Fully tested & burned-in
Fully qualified
• Through-hole and surface mount
(SMT) versions
Yes
Yes
Parts count
1
• Input under-voltage and over-volt-
age protections
Design-in time
Lower
Lower
Lower
Lower
Yes
Higher
www.tycoelectronics.com/products/atca
www.power.tycoelectronics.com
Assembly cost
Higher
• Over current and thermal protec-
tions
Yield/Repair cost
Time to market
Higher
Higher
Flyer PIM05-001
• UL /CSA/CE/VDE approved
Standard off-shelf part
No
PIM200/PIM300
Output
Vmg/mt
Connector
Device Code
Input Voltage
Comcode
Power
200 W
200 W
300 W
300 W
Output
Type
PIM200FZ
PIM200AZ
PIM300FZ
PIM300AZ
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
-48 V (-38 to -75 V DC)
-3.3 V DC
-5.0 V DC
-3.3 V DC
-5.0 V DC
Thru Hole
Thru Hole
Thru Hole
Thru Hole
CC109101813
CC109106762
CC109113858
CC109122322
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
27
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Product Compliant to xTCA or AdvancedMC Specifications (Continued)
AdvancedTCA — Power Distribution & Management Modules (Continued)
PIM series along with Tyco Electronics’ isolated DC/DC and
bus converters and point of load modules, provides a complete
and low-cost power architectural solution while complying
with AdvancedTCA power board requirements.
Isolated Bus Converters
Full Featured DC-DC
Converter Series
Output
Output
Current (A)
Input
Voltage (V)
Output
Voltage (V)
Efficiency
(%)
Current
Share
Form
Factor
Connection
Type
Base
Plate
Power (W)
EQW006A0B
EQW010A0B
QBW018A0B
QBW025A0B
JRB017A0B
72 W
120 W
200 W
300 W
200 W
6 A
10 A
18 A
25 A
17 A
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
48 V (36 – 75)
12 V (11.6 – 12.4)
12 V (11.4 – 12.6)
12 V (11.4 – 12.6)
12 V (11.4 – 12.6)
12 V (11.7 – 12.3)
92 %
93 %
94 %
94 %
92 %
No
No
Eight-Brick
Eight-Brick
Qtr-Brick
TH/SMT
TH
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TH
Qtr-Brick
TH
Half-Brick
TH
Non-Isolated DC-DC Converters
Austin Lynx
Series
Output
Input Voltage
Range (V)
Output Voltage
Range (V)
Efficiency
(%)
Output
Programmable
Remote
On/Off
Remote
Sense
EZ-
Sequence
Connector
Type
Current (A)
Austin MiniLynx
Austin MicroLynx
Austin Lynx
3 A
5 A
8.3 – 14 V
10 – 14 V
10 – 14 V
10 – 14 V
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
91 %
89 %
93 %
92 %
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
SIP/SMT
SIP/SMT
SIP/SMT
SIP/SMT
10 A
16 A
Yes
Yes
Austin SuperLynx
Austin Lynx II
Series
Output
Current (A)
Input Voltage
Range (V)
Output Voltage
Range (V)
Efficiency
(%)
Output
Programmable
Remote
On/Off
Remote
Sense
EZ-
Sequence
Connector
Type
Austin MicroLynx II
Austin Lynx II
6 A
10 A
16 A
25 A
8.3 – 14 V
8.3 – 14 V
8.3 – 14 V
6.0 – 14 V
0.75 – 5.0 V
0.75 – 5.0 V
0.75 – 5.0 V
0.80 – 3.3 V
89 %
93 %
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
SIP/SMT
SIP/SMT
SIP/SMT
SIP/SMT
Austin SuperLynx II
Austin MegaLynx II
92 %
92.5 %
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
28
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
120943
Page
11
11
11
11
11
11
23
13
15
15
15
15
15
15
12
12
12
12
16
18
19
19
12
12
22
22
22
22
22
22
Part No.
1761014
1761015
1761482
1766500
1766501
1766502
1766503
1888250
1888251
1888506
1888507
1888508
1888509
1888652
1888653
1888654
1888655
1888669
1888765
1888766
1934018
1934021
1934026
1934029
1934034
1934037
1934218
1934221
1934222
1934225
Page
22
22
23
5, 6
5, 6
6
Part No.
1934226
1934229
1981276
1981281
1981284
1981287
5120528
5120529
5120530
5120531
5120532
5120533
5120534
5223961
5223963
6367034
6367035
6469001
6469002
6469046
6469048
6469061
6469062
6469074
6469099
6469286
6469287
6469294
6469296
6469375
Page
12
12
25
25
25
25
26
26
26
26
26
26
26
11
11
22
22
7, 8, 10
7, 9
9
120954
120955
120956
120957
120958
1339381
1367703
1469269
1469372
1469373
1469374
1469387
1469388
1469735
1469737
1469793
1469795
1469820
1469920
1469921
1469922
1469974
1469977
1489669
1489779
1658628
1658629
1658744
1658894
6
21
21
20
20
20
20
20
20
20
20
24
14
14
12
12
12
12
12
12
12
12
12
12
10
8
9
9
9
8
9
8
9
10
ToolingPartNumberIndex
Part No.
91347-1
91347-2
91347-3
91347-4
91349-1
91349-2
91349-3
Page
Part No.
Page
9
Part No.
Page
8
8
8
8
8
9
9
9
91349-4
1583224-4
1583237-1
1583248-1
1583255-1
1804174-1
1804177-1
91378-1
10
10
9
9
91378-3
8
1583220-1
1583224-1
1583224-2
1583224-3
9
8
10
10
8
8
29
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Solutions for AdvancedTCA, AdvancedTCA 300,
MicroTCA, and AdvancedMC Standards
Tyco Electronics “At Your Service”
Need more information?
Website
Call Technical Support at
the numbers listed on the
next page.
At www.tycoelectronics.com
you’ll find many useful applications and plenty of product information
Technical Support is staffed
with specialists well versed in
all Tyco Electronics products.
They can provide you with:
· Product News —
The latest information on new developments from various Tyco Electronics brands.
· Industries —
Use our industry pages to quickly find the right product for your application.
I Technical Support
I Catalogs
· Products —
Discover information on our vast array of products ranging from Amplifiers to Wire & Cable.
· Customer Service and Support –
I Technical Documents
I Product Samples
Find contact numbers for Customer Service and Product Information Help Desks plus
FAQs and online technical assistance.
I Tyco Electronics
Authorized Distributor
Locations
Product Websites
www.tycoelectronics.com/products/atca
www.tycoelectronics.com
www.elastomerictech.com
www.power.tycoelectronics.com
www.antenna.tycoelectronics.com
www.hmzd.tycoelectronics.com
www.mpi.tycoelectronics.com
www.thermal.tycoelectronics.com
www.multigigrt.tycoelectronics.com
www.elconproducts.com
www.tycoelectronics.com/fiberoptics
AdvancedMC, AdvancedTCA,
AdvancedTCA 300, MicroTCA and
PICMG are trademarks of PICMG-PCI
Industrial Computer Manufacturers
Group Incorporated.
30
Catalog 3-1773445-8
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
Fax:
+54-11-4733-2200
+54-11-4733-2211
Brasil – São Paulo
(Technical Support)
Phone:
Fax:
+55-11-3611-1311
+55-11-3611-0397
Phone:
Fax:
+905-470-4425
+905-474-5525
United States – Harrisburg, PA
Phone:
Fax:
+717-564-0100
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
Fax:
+800-522-6752
+717-986-7575
Asia/Pacific
Australia – Sydney
Japan – Toyko
New Zealand – Auckland
Singapore – Singapore
Phone:
Fax:
+61-2-9554-2600
+61-2-9502-2556
Phone:
Fax:
+81-44-844-8111
+81-44-812-3207
Phone:
Fax:
+64-9-634-4580
+64-9-634-4586
Phone:
Fax:
+65-6482-0311
+65-6482-1012
Product Information Center:
Product Information Center:
(Technical Support)
(Technical Support)
Philippines – Makati City
Thailand – Bangkok
Phone:
Fax:
+61-2-9840-8200
+61-2-9634-6188
Phone:
Fax:
+81-44-844-8013
+81-44-812-3200
Phone:
Fax:
+632-848-0171
+632-867-8661
Phone:
Fax:
+66-2-955-0500
+66-2-955-0505
India – Bangalore
Korea – Seoul
People’s Republic of China
Vietnam and Indochina –
Ho Chi Minh City
Phone:
Fax:
+91-80-285-40800
+91-80-285-40820
Phone:
Fax:
+82-2-3415-4500
+82-2-3486-3810
Hong Kong
Phone:
Fax:
+852-2735-1628
+852-2735-0243
Phone:
Fax:
+84-8 930-5546
+84-8 930-3443
Shanghai
Phone:
Fax:
+86-21-2407-1588
+86-21-2407-1599
Taiwan – Taipei
Phone:
Fax:
+886-2-8768-2788
+886-2-8768-2268
Europe/Middle East/Africa
Austria – Vienna
Phone:
Fax:
+43-1 90 5 60-0
+43-1 90 5 60-1333
Product Information Center:
(Technical Support):
Netherlands – ’s-Hertogenbosch
Belgium – Kessel-Lo
Phone:
Fax:
+31-73-624-62-46
+31-73-621-23-65
Phone:
Fax:
+34-93-291-0330
+34-93-200-3779
Phone:
Fax:
+32-16-35-23-00
+32-16-35-23-52
Product Information Center:
(Technical Support)
Germany – Langen
Sweden – Upplands Väsby
Bulgaria – Sofia
Phone:
Fax:
+31-73-6246-999
+31-73-6246-998
Phone:
Fax:
+49-6103-709-0
+49-6103-709-1223
Phone:
Fax:
+46-8-50-72-50-00
+46-8-50-72-50-01
Phone:
Fax:
+359-2-971-2152
+359-2-971-2153
Norway – Nesbru
Germany – Speyer
Switzerland – Steinach
Phone:
Fax:
+47-66-77-8886
+47-66-77-8855
Czech Republic – Kurim
Phone:
Fax:
+49-6232-30-0
+49-6232-30-2243
Phone:
Fax:
+41-71-447-0447
+41-71-447-0444
Phone:
Fax:
+420-5-41-162-111
+420-5-41-162-223
Poland – Warsaw
Phone:
Fax:
+48-22-45-76-700
+48-22-45-76-720
Germany - HTS Division – Neunkirchen
Turkey – Istanbul
Denmark – Glostrup
Phone:
Fax:
+49-2247-305-0
+49-2247-305-122
Phone:
Fax:
+90-212-281-8181/2/3
+90-212-281-8184
Phone:
Fax:
+45-43-480-452
+45-43-441-414
Romania – Bucharest
Phone:
Fax:
+40-21-311-3479/3596
+40-21-312-0574
Russia – Moscow
Phone:
Fax:
+7-495-926-5506/07/08/09
+7-495-926-5505
Russia – St. Petersburg
Phone:
Fax:
+7-812-718-8192
+7-812-718-8193
Slovenia – Ljubljana
Phone:
Fax:
+386-1561-3270
+386-1561-3240
South Africa – Port Elizabeth
Phone:
Fax:
+2741-503-4500
+2741-581-0440
3-1773445-8–2.5M–LUG–FP–6-07
Printed in the U.S.A.
Tyco Electronics Corporation
www.tycoelectronics.com
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
3-1773445-8–2.5M–LUG–FP–6-07
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明