1734162-2 [MACOM]
Ribbon Cable Interconnect Solutions; 带状电缆互连解决方案
| 型号： | 1734162-2 |
| 厂家： | 
Tyco Electronics |
| 描述： | Ribbon Cable Interconnect Solutions |
| 文件： | 总100页 (文件大小：3815K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ribbon Cable
Interconnect Solutions
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide
.025" [0.64 mm]
Cable Pitch
.039" [1.00 mm]
Cable Pitch
Mates to .050" x .100"
2-Row Pin Header
Grid
Mates to .100" x .100"
Solders to
Mates to .078" [2 mm]
x .078" [2 mm]
2-Row Pin Header
Grid
2-Row Pin Header
.075" x .100"
Grid
4-Row PCB Layout
Page 15
Pages 10 and 11
See 5176264, 5178751 Series
and Part Number 1775109
(Not in this Catalog)
System 50
Receptacles
Pages 8-11
Ultra ATA Bus
Receptacles
Pages 13-15
System 50
Paddleboard
Page 12
2 mm
Receptacle
Connectors
Pages 16 and 17
.050" [1.27 mm]
Cable Pitch
Mates to .50" x .50"
Mates to .050" x .050"
Mates to .050" x .050"
Micro-MaTch
Female Top Entry
SMD, 188275 Series,
PCB Connector
Page 10
Micro-MaTch
Female Top Entry,
215079 Series,
PCB Connector
Page 8
Micro-MaTch
Female Side Entry,
215460 Series,
PCB Connector
Page 9
Solders directly to
2.54mm x 1.27mm
Staggered 2 row
PCB Footprint
Paddle Board
Connector,
215570 Series,
Page 13
Male-on-Wire
215083 Series,
Page 12
Male-on-Wire
215083 Series,
Page 12
Male-on-Wire
215083 Series,
Page 12
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to 50" x 50"
Right-Angle
Headers
Mates to 50" x 50"
Vertical Headers
50/50 Grid
Receptacle
Connector with or
without latch
50/50 Grid
Receptacle
Connectors
without latch
2
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide (Continued)
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to .100" x .100"
Novo Type Female
Socket Connector
Pages 48-51
Mates to .100" x .100"
3-Row Eurocard
Type C & R
Mates to .100" x .100"
2-Row Universal or
Low-Profile Headers
Pages 75-96
See Catalog 82721
622 and 636
Series Female
Socket Connectors
Pages 52 and 53
609 Series
Female
Socket Connectors
Pages 54 and 55
Universal I/O
Pin Connectors
Pages 45 and 46
EUROLATCH
Receptacles
Page 47
Novo
Connectors
Pages 48-51
.050" [1.27 mm]
Cable Pitch
(Continued)
Mates to
2-Row DIP Sockets
or Solders to PCB
Solders to
.050" x .100"
4-Row PCB Footprint
.100" x .100"
Footprint
.100" x .300"
Footprint
.100" x .600"
Footprint
622 and
636 Series
DIP Plugs
Page 57
Solder
Transition
Connectors
Page 61
609 Series
DIP Plugs
Page 56
TE Connectivity
DIP Plugs
TE Connectivity
DIP Plugs
TE Connectivity
DIP Plugs
Page 58
Page 59
Page 60
3
Catalog 82012
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Introduction
Disclaimer
While TE has made every reasonable
effort to ensure the accuracy of the
information in this catalog, TE does
not guarantee that it is error-free, nor
does TE make any other representation,
warranty or guarantee that the informa-
tion is accurate, correct, reliable or
current. TE reserves the right to make
any adjustments to the information
contained herein at any time without
notice. TE expressly disclaims all implied
warranties regarding the information
contained herein, including, but not
limited to, any implied warranties of
merchantability or fitness for a particular
purpose. The dimensions in this catalog
are for reference purposes only and
are subject to change without notice.
Specifications are subject to change
without notice. Consult TE for the latest
dimensions and design specifications.
Restriction on the use of Hazardous Substances
(RoHS)
At TE Connectivity, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted mate-
rials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
I Cross-Reference from
Non-compliant to Compliant Products
I Ability to browse RoHS
Compliant Products in our
© 2012, 2009, 1999, 1998, 1996, 1995,
1993, 1992, 1989, 1988, 1986, 1985,
1983, 1982, 1977, 1976, 1974 and 1973
Tyco Electronics Corporation.
on-line catalog
I Downloadable Technical Data
Customer Information
RoHS
Customer
Presentation
All Rights Reserved.
Support
I More detailed information
AMP, AMPLIMITE, AMPMODU, CHAMP,
EUROLATCH, TE Connectivity and the
TE connectivity (logo) are trademarks
of the TE Connectivity Ltd. family of
companies.
Other logos, product and Company
names mentioned herein may be
trademarks of their respective owners.
regarding the definitions
Center
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
used above
I So whatever your questions when it comes to RoHS, we
have the answers at www.te.com/leadfree
4
Catalog 82012
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
reference purposes only.
Mexico/C. Am.: +52 (0) 55-1106-0800
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Introduction (Continued)
Mass termination capabili- Ribbon Cable Solutions are ductor and the .0152 [0.382]
board and board-to-board
interconnections. Its design
prevents the traditional
ties of the ribbon cable
connectors have helped
make ribbon cable, and
particularly .050 [0.127]
centerline cable, popular
within the Electronics
Industry. The ability to termi-
nate up to 64 conductors
simultaneously, without
stripping or otherwise pre-
paring the cable, presents
obvious labor savings.
available on three separate
cable centerline spacings.
They include:
posts on .050 x .100 [1.27 x
2.54] grid. Also available in
paddleboard configurations. failure mode in tin-plated
connections, fretting corro-
.025 [0.64] Centerlines
2.0 mm [.079] ribbon
sion. An additional position-
I
I
I
System 50 receptacles
System 50 paddleboards
Pin headers
cable receptacles feature
ing spring in the female part
contacts on a true 2.0 mm
absorbs relative movements
[.079 in.] mating grid for
caused by vibrations and
1.0 mm [.039 in.] pitch
.039 [1.00] Centerlines
thermal expansion between
ribbon cable. Select
I
2.0 mm receptacles
Breakaway pin headers
male and female contacts.
configurations are available
I
By preventing movements
between 8 and 50-positions.
on the contact spot, a gas
Receptacles feature
.050 [1.27] Centerlines
tight connection can be
insulation displacement
I
I
I
50/50 Grid connectors
Micro-MaTch connectors
Novo Receptacle
connectors
Ribbon Cable Connectors
are wire-to-board devices
used to make the transition
between cable and pc
board circuitry. They find
heavy use within equipment
to connect one board to
another or one subsystem
to another. The connectors
are also used in input/out-
put applications, connecting
different pieces of equipment.
guaranteed under all
contacts (IDC).
circumstances.
50/50 Grid connectors
Novo receptacles feature
Although AMPMODU 50/50
I
I
DIP plugs
two rows of contacts on
Grid Vertical Headers and
EUROLATCH receptacle
connectors per DIN
41612 and IEC 603-2
Pin Headers
.100 x .100 [2.54 x 2.54]
Receptacles are designed
centers on selected sizes
for parallel board-to-board
of 10 thru 64-positions
stacking in high density
I
and mate with .025 [0.64]
applications, Right-angle
square or round posts. The
board-to-board and cable-
System 50 ribbon cable
receptacles will terminate
cable on .025 [0.64] center-
lines. They are available in
select sizes from 20 thru
100-positions, and accept
wire size range 30 AWG
[0.05 mm2] solid or
stranded wire and 32 AWG
[0.03 mm2] stranded pvc
insulated wire. Housing and
cover are made of high tem-
perature tolerant thermo-
plastic material, black, UL
94V-0 rated. A single mating
beam, phosphor bronze
contact provides the inter-
connect between the con-
Novo tuning-fork contact
to-board applications are
offers a military-approved
also possible since the
design, at an affordable
vertical receptacles also
cost. Polarization options
mate with non-latching
include military, center and
right-angle headers and the
military, or dual bar.
vertical headers also mate
with non-latching cable con- DIP (Dual In-Line Package)
nectors.
plugs provide a permanent
connection of ribbon cable
to a pc board or mating
to DIP sockets. Using the
same centerline dimensions
as DIP integrated circuits,
DIP plugs offer space
Micro-Match connectors
Miniaturization and the trend
towards higher density of
electronic functions on a
substrate led to the intro-
duction of Micro-MaTch. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
efficiency and a low profile
of .253 [6.43].
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all TE products. They can
provide you with:
I Technical Support
I Catalogs
I Technical Documents
I Product Samples
I TE Authorized Distributor
Locations
5
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Table of Contents
Ribbon Cable Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
.025 [0.64] Centerline Ribbon Cable Connectors
System 50 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
Board-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Ultra ATA Bus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
.039 [1.00] Centerline Ribbon Cable Connectors
2 mm [.079] Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
AMPMODU 50/50 Grid Connector System
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Board-to-Board Vertical Receptacles and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . 21
Recommended PC Board Layouts for Vertical Connectors . . . . . . . . . . . . . . . . . . . . . 22
Board-to-Board Right-Angle Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27]
Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27]
Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Terminating Covers for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Application Tooling for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Technical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Micro-MaTch Connector System
Miniature Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
System Overview/Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Applications (3 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Applications (2 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Female-on-Board Connector, Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Female-on-Board Connector, Side Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Female-on-Board Connector Surface Mount Device (SMD) . . . . . . . . . . . . . . . . . . . . . 36
Male-on-Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Male-on-Wire Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Paddle Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Crimp On Snap In (COSI) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43
Lead Assembly and Sample Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
.050 [1.27] Centerline Ribbon Cable Connectors
Universal I/O Pin Connectors without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Universal I/O Pin Connectors with Slotted Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . 46
EUROLATCH Receptacles 64-Position (Three-Row Housings, Two Rows Loaded) . . . . 47
Novo Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51
Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Center and Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . 50
Dual Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series . . . 52, 53
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . 54, 55
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . . . . . . . . . . . . . . . . 56
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series . . . . . . . . . . . . . . . . . . . . . . . . 57
6
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Table of Contents (Continued)
.050 [1.27] Centerline Ribbon Cable Connectors (Continued)
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4-Row PCB Solder Transition Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1-Row Horizontal Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Accessories
Flexible Pull Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Universal I/O Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Military Polarizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Strain Relief for 622 Series DIP Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Pull Loops, Permanent (For Receptacles and Pin Connectors) . . . . . . . . . . . . . . . . . . . 66
Strain Relief for Universal I/O without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors . . . . . . . . . . . . . 67
Strain Relief for Novo and Ultra ATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Strain Relief for 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Strain Relief for 622 and 636 Series Female Socket Connectors . . . . . . . . . . . . . . . . . . 69
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Low Profile Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-83
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]
Centerlines and “Kinked” Solder Tails for PCB Retention . . . . . . . . . . . . . . . . . . . 78, 79
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . 80, 81
IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100
[2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
Universal Ejection Style Pin Headers and Pinless Headers
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86
Universal Ejection Style Pin Headers, ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . 87, 88
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines, Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . 89-91
Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93
Universal Ejection Style Pin Headers, with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) . . . . . . . . . . . . . . . . 94, 95
Latches for Ejection Style Universal Pin Headers and Pinless Headers . . . . . . . . . . . . . 96
Cable Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97, 98
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
7
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Product Facts
I Preassembled housing and
cover
I One-step termination
I End and daisy chain
termination
I Positive end latching of
connector to universal
header
I Terminates 30 AWG
[0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
.025 [0.64] centerline
ribbon cable with PVC
insulation
I Connectors are RoHS
compliant
I Recognized under the
Component Program
of the Underwriters
R
Laboratories, Inc.
UL File No. E28476
I Certified by the
Canadian Standards
Association,
R
The System 50 Ribbon
Cable connector is a
conductors with PVC cable
insulation.
on the .050 x .100
File No. LR 7189
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
receptacle connector that
will terminate ribbon cable
on .025 [0.64] centerlines.
It is available in select sizes
from 10 to 100 positions
and will accommodate 30
AWG [0.05 mm2] solid or
stranded and 32 AWG
[0.03 mm2] stranded
The housing and cover
are of a high temperature
tolerant thermoplastic
(black) with a UL 94V-0
rating. A phosphor bronze
single mating beam contact
provides the interconnect
between the conductor and
the .015 [0.38] square posts
8
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors,
.025 [0.64] Centerline Ribbon Cable (Continued)
Double Row Receptacle
.254 .228
[6.45] [5.79]
.580
[14.73]
Before
Termination
A
Cover
.054
[1.37]
B
C
Latch
.100
[2.54]
.198
[5.03]
.228
[5.80]
.246
[6.25]
.430
[10.92]
Material and Finish
Contact
.335
[8.51]
Housing — Black thermoplastic,
UL 94V-0 rated
Latches — Stainless steel
Housing
Contacts — Phosphor bronze, plated
30 microinch gold over nickel with tin
in termination area
.102
[2.59]
Position #1
Indicator
E
F
.100
[2.54]
Related Product Data
Mateable Connectors —
See AMP Catalog 82178
.050
[1.27]
Typ.
D
See Part Numbers 104068 and 104069
Series on pages 10 and 11
Dimensions
No. of
Pos.
Part Number
A
B
C
D
E
F
Mates with Posts — .015 [0.38]
square, .125 [3.18] long, on
.050 x .100 [1.27 x 2.54] grid
.510
.445
.225
.200
.096
.294
10
14
16
20
24
26
30
34
40
44
50
60
64
68
72
80
100
2-111196-5
2-111196-6
2-111196-7
1-111196-8
2-111196-8
2-111196-9
1-111196-9
3-111196-0
2-111196-0
3-111196-1
2-111196-1
2-111196-2
3-111196-2
3-111196-4
2-111196-3
3-111196-3
2-111196-4
12.95
11.30
5.72
5.08
2.44
7.47
.610
15.49
.545
13.84
.325
8.26
.300
7.62
.146
3.71
.394
10.01
.660
16.76
.595
15.11
.375
9.52
.350
8.89
.171
4.34
.444
11.28
Technical Documents
Product Specification
108-1109
Application Specification
114-25029
.760
19.30
.695
17.65
.475
12.07
.450
11.43
.221
5.61
.544
13.82
.860
20.32
.795
20.19
.575
14.61
.550
13.97
.271
6.88
.644
16.36
.910
23.11
.845
21.46
.625
15.88
.600
15.24
.296
7.52
.694
17.63
1.010
25.65
.945
24.00
.725
18.42
.700
17.78
.346
8.79
.794
20.17
1.110
28.19
1.045
26.54
.825
20.96
.800
20.32
.396
10.06
.894
22.71
1.260
32.00
1.195
30.35
.975
34.54
.950
24.13
.471
11.96
1.044
26.52
1.360
34.54
1.295
32.89
1.075
27.31
1.050
26.67
.521
13.23
1.144
29.06
1.510
38.35
1.445
36.70
1.225
31.12
1.200
30.48
.596
15.14
1.294
32.87
1.760
44.70
1.695
43.05
1.475
37.47
1.450
36.83
.721
18.31
1.544
39.22
1.860
47.24
1.795
45.59
1.575
40.00
1.550
39.37
.771
19.58
1.644
41.76
1.960
49.78
1.895
48.13
1.675
42.55
1.650
41.91
.821
20.85
1.744
44.30
2.060
52.32
1.995
50.67
1.775
45.08
1.750
44.45
.871
22.12
1.844
46.84
2.260
57.40
2.195
55.75
1.975
50.17
1.950
49.53
.971
24.66
2.044
51.92
2.760
70.10
2.695
68.45
2.475
62.87
2.450
62.23
1.221
31.01
2.544
64.62
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
9
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
System 50 Board-to-Board Connectors, Through-Hole Headers
.015
[0.38]
Shrouded,
Double Row
Vertical
.390
[9.91]
.055*
[1.40]
.060
[1.52]
Circuit Identification
2 Plc.
Feature**
A
.050
[1.27]
Typ.
.092
[2.34]
.100
[2.54]
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
.344
[8.74]
.284
[7.21]
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
.100
[2.54]
Related Product Data
Mateable Receptacles — page 9
Technical Documents
Product Specification
108-1093
Application Specification
114-25031
No. of
Positions
Dim.
A
Part
Number
No. of
Positions
Dim.
A
Part
Number
.380
.980
10
12
14
16
20
24
26
30
5-104068-2
5-104068-8
5-104068-9
6-104068-0
5-104068-1
6-104068-1
6-104068-2
5-104068-3
34
40
44
50
60
68
72
80
100
6-104068-3
9.65
24.89
.430
10.92
.480
12.19
.530
13.46
.630
16.00
.730
18.54
.780
19.81
.880
22.35
1.130
28.70
1.230
31.24
1.380
35.05
1.630
41.40
1.830
46.48
1.930
49.02
2.130
54.10
2.630
66.80
5-104068-4
6-104068-4
5-104068-5
5-104068-6
6-104068-8
6-104068-5
6-104068-6
6-104068-7
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and 14
position headers.
Note: All part numbers are RoHS compliant.
10
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
System 50 Board-to-Board Connectors, Through-Hole Headers (Continued)
.100
[2.54]
at Post
Tips
Shrouded,
Double Row
Right-Angle
.055*
[1.40]
.160 [4.06]
at Post Tips
.540
.408
[10.36]
[13.72]
Hold down
post
.060
[1.52]
2 Plc.
Circuit Identification
Feature**
.100
[2.54]
A
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Contacts — Copper alloy, plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127] nickel
.050
[1.27]
Typ.
.350
[8.89]
.290
[7.37]
Related Product Data
Mateable Receptacles — page 9
.100
[2.54]
Technical Documents
Product Specification
Note 2
Note 1
108-1093
Application Specification
114-25031
No. of
Positions
Dim.
A
Part
Number
No. of
Positions
Dim.
A
Part
Number
.330
8.38
1.130
28.70
8
5-104069-8
40
5-104069-6
.380
1.380
10
20
24
26
30
34
5-104069-4
5-104069-1
6-104069-2
6-104069-3
5-104069-5
6-104069-4
50
60
5-104069-2
5-104069-7
6-104069-8
6-104069-6
5-104069-3
6-104069-7
9.65
35.05
.630
16.00
.730
18.54
.780
19.81
.880
22.35
1.630
41.40
1.830
46.80
1.930
49.02
2.130
54.10
68
72
80
.980
24.89
2.630
66.80
100
**Point of measurement for gold thickness.
**Circuit identification feature omitted on 8, 10, 12 and
14 position headers.
Notes: 1. Hold down posts located as shown for
16 through 100 position headers.
Notes: 2. Hold down posts located as shown for
8 through 14 and 60 through 100 position
headers.
Notes: 3. All part numbers are RoHS compliant.
11
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
A
Paddleboard
.273
[6.93]
(Terminated)
Material and Finish
Housing — LCP thermoplastic,
UL 94V-0 rated, black
Cover — Polyester, UL 94V-0 rated,
black
.340
[8.64]
(Unterminated)
.050
[1.27]
Position 1
Indicator
.168
[4.27]
.100
[2.54]
Contacts — Phosphor bronze, plated
.000100 [0.00245] min. tin over .000050
[0.00127] min. nickel underplating
.020
[0.51]
.008
[0.20]
Typ.
.050
[1.27]
.024
[0.61]
.075
[1.91]
Typ.
Typ.
Typ.
B
.304
.045
[1.19]
Ref.
[7.72]
Technical Documents
Product Specification
108-1109
Application Specification
114-25040
.040
[1.02]
.030
[0.76]
Standoffs
.118
[3.00]
(Various Locations)
B
B
.050
[1.27]
.031
[0.79]
.050
[1.27]
.031
[0.79]
Typ.
Typ.
Typ.
Typ.
.304
[7.72]
.304
[7.72]
.075
Typ.
.075
[1.91]
Typ.
[1.91]
Printed Circuit Board Hole Layout #1
Printed Circuit Board Hole Layout #2
Dimensions
Dimensions
No. of
Pos.
PCB
Layout
Kinked
Legs
No. of
Pos.
PCB
Layout
Kinked
Legs
A
B
A
B
.436
.200
1.286
1.050
10
14
16
20
24
26
28
30
34
40
1
1
2
2
2
1
2
1
1
2
5111595-1
5111595-2
5111595-3
5111595-4
5111595-5
5111595-6
2-5111595-0
5111595-7
5111595-8
5111595-9
44
46
50
60
64
68
72
80
100
2
1
1
2
2
2
2
2
2
1-5111595-0
1-5111595-7
1-5111595-1
1-5111595-2
1-5111595-3
1-5111595-9
1-5111595-4
1-5111595-5
1-5111595-6
11.07
5.08
32.66
26.67
.536
13.61
.300
7.62
1.336
33.93
1.100
27.94
.586
14.88
.350
8.89
1.436
36.47
1.200
30.48
.686
17.42
.450
11.43
1.686
42.82
1.450
36.83
.786
19.96
.550
13.97
1.786
45.36
1.550
39.37
.836
21.23
.600
15.24
1.886
47.90
1.650
41.91
.886
22.50
.650
16.51
1.986
50.44
1.750
44.45
.936
23.77
.700
17.78
2.186
55.52
1.950
40.53
1.036
26.31
.800
20.32
2.686
68.22
2.450
62.23
1.186
30.12
.950
24.13
See Application Specification for termination tooling.
Note: All part numbers are RoHS compliant.
12
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable
Product Facts
I IDC termination
I Backward compatible with
current IDE Interfaces
I Improved signal integrity:
1 to 1 signal to ground ratio
I Improved crosstalk when
compared to existing IDE
Cable Assembly
I Color coded connectors
for “System board,” and
“Master HDD” and
“Slave HDD”
I Cable impedance 80 ohms
I Up to 3 connectors per cable
assembly
I 15 microinches gold plating
I Recognized under the
Component Program
of the Underwriters
R
Laboratories, Inc.
Ultra ATA is the next genera- The new connectors are
UL File No. E28476
tion IDE (Integrated Drive
Electronics) bus. The current
IDE bus has a maximum
data transfer rate of about
16.5 MB/second. As the bus
speeds and disk drive per-
formances increase, the
cable assembly between
the motherboard and hard
drive becomes a limiting
factor in data transfer from
the drive.
color coded to identify:
I Certified by the
1. system board connector
2. primary or master hard
drive connector
Canadian Standards
Association,
R
File No. LR 7189
3. slave drive connector
I Terminates 30 AWG solid or
stranded PVC insulated 80
conductor ribbon cable
Standard Issues
The Ultra ATA cable per-
formance specification is
part of the Small Form
Factor Committee No. 8049.
Compaq Computer and
Western Digital are the
major sponsors of the
standard.
The Ultra ATA connector
and cable assembly from
TE provide the customer
with improved electrical
performance by creating a
1:1 signal-to-ground ratio.
The connector design incor-
porates an IDC bus bar to
common the 40 additional
ground signals. The cable is
.025" centerline PVC ribbon
cable. The connector is fully
backward compatible with
existing 40-position headers
with pin 20 removed on
motherboards and disk
drives.
Contacts Available:
I
80 position IDC contact
terminations
I
I
40 signal contacts
40 ground terminations to
special IDC bus bar
13
Catalog 82012
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
reference purposes only.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Related Product Data
Strain Relief — Part Number 499252-
1
.420
.492
Max.
[10.67]
[12.50]
Mateable Headers — page 15
Terminated View
2.186
[55.52]
Material & Finish
.240
[6.10]
Housing and Cover —
Thermoplastic, UL 94 V-0 rated, color
per table
Contacts — Phosphor bronze, plated
gold per table on mating end, .000050
[0.00127]min. tin in wire termination
area, over .000050 [0.00127] min nickel
on entire contact.
Cover
Ground
Bus Bar
.610
[15.49]
Ref.
Signal
Contacts
Housing
Pos. No. 1
Indicator
Optional Center*
Polarizer Bar
Contact
Technical Documents
Product Specification
108-1740
.100
[2.54]
Circuit 20
Molded Shut
.100
[2.54]
1.90
[48.26]
Application Specification
114-40056
Color Coded
Conductor No. 1
Position 1
Position 1
Position 1
See Application Specification for
termination tooling.
Pin 34
Conductor Cut
per SFF-8049
Accessories
Strain Relief — page 68
Keying Plug — page 64
Pull Loops — page 66
Pull Tabs — page 63
Configuration A
“System” Board
Connector
“Master” or
“Primary”
Connector
“Slave”
Connector
Configuration B
“System” Board
Connector
“Slave”
Connector
“Master” or
“Primary”
Connector
*Center & Military Polarized
Military Polarized
Connector Type
Housing
Color
Cover
Color
Housing
Color
Cover
Color
15µ" Gold
15µ" Gold
“System” Board
“Primary” or “Master”
“Slave”
1658619-2
1658619-1
1658619-3
Blue
Black
Gray
Black
Black
Black
1658618-2
1658618-1
1658618-3
Blue
Black
Gray
Black
Black
Black
Notes: 1. All connectors are “ODD GROUND” configuration, ie. all odd cable conductors are grounded. “EVEN GROUND” connectors are not available.
See Customer Drawings for detailed electrical connection descriptions.
2. All part numbers are RoHS compliant.
14
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Universal Headers — Pin 20 Omitted
Ultra ATA
Compatible Headers
Post
Type
Housing
Material
Latch
Type
Part
Number
Contact Finish
(Plating Code)
Solder Tail
Length
Comments
.110
Vertical
Vertical
Nylon or PBT
Nylon or PBT
Long
Short
5111824-9
6489700-1
D
B
2.79
.123
3.12
PP
Legend: PP — Polarization Peg
Low Profile Headers — Pin 20 Omitted
Post
Type
Housing
Material
Latch
Type
Part
Number
Contact Finish
(Plating Code)
Solder Tail
Length
Housing
Color
.120
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Nylon
Nylon
None
None
None
None
None
None
1888188-1
1888188-2
2-1734161-4
2-1734161-5
1734162-2
1734162-4
A
B
C
C
C
C
Black
Black
Black
Blue
3.05
.120
3.05
.122
3.10
Nylon 6T
Nylon 6T
Nylon
.122
3.10
.110
2.79
Black
Blue
.110
2.79
Nylon
Plating Code A — Duplex plated, gold flash on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire
post underplated .000050 [0.00127] min. nickel.
Plating Code B — Duplex plated, gold flash over palladium-nickel, .000015 [0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Plating Code C — Gold flash over nickel underplate on entire post.
Plating Code D — Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015
[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated
.000050 [0.00127] min. nickel.
Note: All part numbers are RoHS compliant.
15
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
2.0 mm [.079] Receptacle Connectors
Product Facts
I True hard metric 2.0 x 2.0
[.079 x .079] mating grid for
1.0 [.039] pitch ribbon cable
I Wide selection of
configurations, 8-50
positions
I Insulation displacement
(IDC), beryllium copper
contacts, duplex plated
gold-over-nickel
I Top/bottom single beam
contact orientation
I UL 94V-0 rated thermo-
plastic components
I Assemblies are furnished
preassembled with
termination covers
I Optional polarization
I Optional strain relief
available
I Connector assemblies
packaged for ease of
handling and protection
I Recognized under the
Component Program
of the Underwriters
The 2.0 [.079] receptacle
connector family features
contacts on a true 2.0 x 2.0
[.079 x .079] mating grid
for 1.0 [.039] pitch 28 AWG
ribbon cable. A variety of
configurations are available
from 8 through 50 positions.
This small, compact
connector is finding wide
acceptance throughout the
electronic industry, particu-
larly in the smaller laptop
and notebook type comput-
ers with 63.5 [2.5] drives.
Other areas of application
include point-of-sale termi-
nals, fax machines, photo-
copiers, printers, consumer
electronics, and other com-
puter peripheral equipment.
in the mating area and
R
0.00254 [.000100] min.
tin on termination end, all
over 0.00127 [.000050]
nickel underplating. Contact
mating area is 1.54 [.061]
from the face of the housing
and they accept 0.50mm
[.0197] round or square
posts.
Laboratories, Inc.
UL File No. E28476
I Certified by the
Canadian Standards
Association,
R
File No. LR 7189
Performance Data
Durability — 150 cycles
Termination Resistance —
25 milliohms max.
Mating Force —
1.67 N max. per contact
Unmating Force —
0.14 N min. per contact
Housings are made of
UL 94V-0 rated polyester
with optional center bar
polarization. Complete
assemblies are furnished
preassembled with termina-
tion covers. The complete
assembly presents a com-
pact design only 5.2 [.203]
wide over the termination
cover by 4 [.157] deep by
4 [.157] wide mating end.
Terminated height is 8.48
[.334]. Optional strain relief
available. Assemblies are
packaged for ease of
Operating Temperature —
-65°C to +105°C
Technical Documents
Product Specification
108-1372
These receptacles feature
insulation displacement
contacts (IDC) with a
top/bottom single-beam
contact orientation.
Contacts are beryllium
copper, duplex plated
0.00076 [.000030] gold
Application Specification
114-40038
handling and protection.
16
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
2.0 mm [.079] Receptacle Connectors,
Non-Polarized and Center Polarized Bar
Material and Finish
A
Housing and Termination Cover —
UL 94V-0 rated polyester, black
5.16
Contacts — Beryllium copper, duplex
plated 0.00076 [.000030] min. gold on
mating end, 0.00013 [.000005] min.
gold on termination end, all underplated
0.00127 [.000050] min. nickel
[.203]
Optional Center Polarizer Bar
Note: Accepts 0.08-0.09mm2 [28 AWG]
ribbon cable, PVC insulated 1.00 [.039]
pitch. See Application Specification for
details.
1.54
[.061]
10.24
[.403]
Technical Documents
Product Specification
108-1372
5.00
[.197]
4.000
[.1575]
Position Number
1 Indicator
Application Specification
114-40038
B
Mateable Connectors — pages 9
and 12, or see Application Specification
for header requirements
Position Number 1
0.05
1.90
[.075
.002
]
2.00
[.079]
Typ.
Accessories
8.48
[.334]
Pull Loops — page 66
Keying Plugs — page 64
Strain Relief — page 68
2.00
[.079]
Typ.
Terminated View,Typical
Dimensions
No. of
Positions
Center
Polarized
Non-Polarized
A
B
13.18
8.41
8
3-111623-0
1-111623-8
3-111623-1
1-111623-9
2-111623-0
2-111623-1
2-111623-9
2-111623-7
2-111623-2
2-111623-3
2-111623-8
2-111623-4
2-111623-5
2-111623-6
2-111626-4
1-111626-7
—
.519
.331
15.16
.597
10.41
.410
10
12
14
16
20
22
24
26
30
34
40
44
50
17.15
.675
12.40
.488
19.18
.755
14.40
.567
1-111626-8
2-111626-5
1-111626-9
—
21.18
.834
16.41
.646
25.17
.991
20.40
803
27.18
1.070
22.40
.882
29.18
1.149
24.41
.961
2-111626-6
2-111626-7
—
31.17
1.227
26.42
1.040
35.18
1.385
30.40
1.197
39.17
1.542
34.42
1.355
2-111626-0
2-111626-1
2-111626-2
2-111626-3
45.19
1.779
40.41
1.591
49.17
1.936
44.40
1.748
55.17
2.172
50.39
1.984
Note: All part numbers are RoHS compliant.
17
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Specifications subject
to change.
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
AMPMODU 50/50 Grid Connector System
Right-Angle Headers,
Board-to-Board (Page 24)
Vertical Headers,
Board-to-Board
(Page 21)
Receptacles,
Cable-to-Board,
With Latch
(Page 26)
Vertical Receptacles,
Board-to-Board
(Page 20)
Receptacles,
Cable-to-Board
Without Latch
(Page 26)
Vertical Headers,
Board-to-Board
(Page 21)
Vertical Headers,
Board-to-Board
(Page 21):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 20)
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
18
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles and Headers
Product Facts
I Surface-mount products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
I High density .050 x .050
[1.27x1.27] centerline grid
I Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
I Non-protrusive metallic
holddowns
I Reliable dual beam
receptacle contacts for
redundant contact
I Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
I Compatible with standard
surface-mount processing
(VPR and IR)
I Receptacle and header allow
for drainage of
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
PC boards and allow
surface mounting to both
sides of the board. In
addition to providing
retention during processing, assembly.
the holddowns are soldered
during reflow and therefore
provide
long-term strain relief for
the solder joints.
holddown characteristics
and packaging methods
result in a system that is
compatible with robotic
processing fluids
I Tape and reel packaging
available. Contact
TE for details
I Polarized header and
receptacle assemblies
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
I Recognized under the
Component Program of
Underwriters
The headers and receptacles
feature polarization to
prevent misalignment.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 24) and the
vertical headers also mate
with non-latching cable
connectors.
Three Board Stack Heights
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
Laboratories Inc.,
File No. E28476
.250 .006
[6.35 0.15]
R
I Certified by
Canadian Standards
Association
File No. LR7189
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
R
.320 .006
[8.13 0.15]
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
Non-Protrusive
Metallic Holddowns
.390 .006
[9.91 0.15]
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
19
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
.028
[0.71]
.120
[3.05]
.050
[1.27]
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Polarizing Tab
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
(For Polarization to
Mating Header)
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
.187
[4.75]
.050
[1.27]
.050
[1.27]
Related Product Data
Mating Headers — pages 21 and 24
PC Board Layouts — page 22
Performance Specifications —
page 29
Technical Documents — page 29
Product Specification 108-1332
Application Specification
Receptacle
114-7010
No. of
Pos.
Dimension
A
Part Numbers
Packaging — Tube or Tape and Reel
Tube
Tape and Reel*
No Hold Down w/Vacuum Cover
10
20
30
40
50
60
70
80
100
.266 [6.75]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
5-104652-1
5-104652-2
5-104652-3
5-104652-4
5-104652-5
5-104652-6
5-104652-7
5-104652-8
6-104652-0
5-147384-1
5-147384-2
5-147384-3
5-147384-4
5-147384-5
5-147384-6
5-147384-7
5-147384-8
5-147384-9
5-147413-1
5-147413-3
5-147413-4
—
5-147413-2
—
—
—
—
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
Note: All part numbers are RoHS compliant.
20
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
.050
[1.27]
.225
[5.71]
.050
[1.27]
A
.2255
[5.728]
For .250 [6.35] Mated Height
.050
[1.27]
.030
[0.76]
A
For .320 [8.13] Mated Height
.2975
[7.557]
.050
[1.27]
.030
[0.76]
A
.3675
[9.335]
For .390 [9.91] Mated Height
.050
[1.27]
.030
[0.76]
Material and Finish
Related Product Data
Technical Documents — page 29
Product Specification 108-1332
Application Specification
114-7010
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Mating Receptacles — pages 20 and
26 (without latch only)
PC Board Layouts — page 22
Performance Specifications — page
29
Packaging — Tube or Tape and Reel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Header Part Numbers
.250 [6.35] Mated Height
Tape & Reel*
.320 [8.13] Mated Height
.390 [9.91] Mated Height
Tubes
Hold Down No Hold Down
No. of
Pos.
Dimension
A
Tubes
Tubes
Tape & Reel*
Tape & Reel*
Hold Down No Hold Down
10
20
30
40
50
60
70
80
90
100
.372 [9.44] 5-104655-1
.622 [15.79] 5-104655-3
.872 [22.14] 5-104655-4
1.122 [28.49] 5-104655-5
1.372 [34.84] 5-104655-6
1.622 [41.19] 5-104655-7
1.872 [47.54] 5-104655-8
2.122 [53.89] 5-104655-9
5-147381-1
5-147381-2
5-147381-3
5-147381-4
5-147381-5
5-147381-6
5-147381-7
5-147381-8
—
5-147121-1
5-104656-1
5-104656-2
5-104656-3
5-104656-4
5-104656-5
5-104656-6
5-104656-7
5-104656-8
5-104656-9
6-104656-0
5-147382-1
5-147382-2
5-147382-3
5-147382-4
5-147382-5
5-147382-6
5-147382-7
5-147382-8
—
5-104693-1
5-104693-2
5-104693-3
5-104693-4
5-104693-5
5-104693-6
5-104693-7
5-104693-8
5-104693-9
6-104693-0
—
5-147383-1
5-147383-2
5-147383-3
5-147383-4
5-147383-5
5-147383-6
5-147383-7
5-147383-8
—
5-147121-2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.372 [60.24]
—
2.622 [66.59] 6-104655-1
5-147381-9
5-147382-9
5-147503-1
5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 22.
Note: All part numbers are RoHS compliant.
21
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Recommended PC Board Layouts for Vertical Connectors
Headers
.029
[0.74]
.050
[1.27]
B Spaces at .050 [1.27] = C
.162
[4.11]
.010
[0.25]
4 Plc.
C of Pattern
L
Detail A
.182
.047
[1.19]
2 Plc.
[4.62]
.091
[2.31]
.061
[1.54]
Detail A
D
Receptacles
.029
[0.74]
.050
[1.27]
.110
[2.79]
B Spaces at .050 [1.27] = C
C of Pattern
L
.130
[3.30]
.065
Detail A
[1.65]
.060
[1.52]
D
Receptacle Dimensions
C
Header Dimensions
No. of
Pos.
B
4
D
B
C
D
10
20
30
40
50
60
70
80
90
100
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
.320 [8.12]
.570 [14.48]
.820 [20.83]
1.070 [27.19]
1.320 [33.53]
1.570 [39.88]
1.820 [46.23]
2.070 [52.58]
2.320 [58.93]
2.570 [65.28]
4
.200 [5.08]
.322 [8.17]
.572 [14.52]
.822 [20.87]
1.072 [27.22]
1.322 [33.57]
1.572 [39.92]
1.822 [46.27]
2.072 [52.62]
2.322 [58.97]
2.572 [65.32]
9
9
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
14
19
24
29
34
39
44
49
14
19
24
29
34
39
44
49
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
22
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers
Product Facts
I Surface-mount products for
right-angle board-to-board
and cable-to-board
applications
I Double-row, right-angle
shrouded headers
I High density .050 x .050
[1.27 x 1.27] centerline grid
I Latching and non-latching
versions available
I Non-protrusive metallic
holddowns
I Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
I Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
I Compatible with standard
surface-mount processing
(VPR and IR)
I Standoffs on header
housings allow for drainage
of processing fluids
I All headers are polarized
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 20) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 26). The small
design as those used in the
vertical headers (page 21)
and receptacles (page 20).
There are also metallic tabs
that are soldered to the sur-
faces of the PC board pads
for added support.
I Recognized under the
Component Program of
Underwriters
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or non-
latching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 26).
All headers feature polariza-
tion to help prevent mis-
alignment during mating.
R
Laboratories Inc.,
File No. E28476
I Certified by Canadian
Standards
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Association
R
File No. LR7189
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
23
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Non-Latching Header
A
.050
[1.27]
Typ.
.050
[1.27]
.213
[5.41]
Latching Header
.352
[8.94]
.050
[1.27]
.430
[10.92]
.029
[0.74]
Typ
.047
[1.19]
Plated-Thru Hole
(2 Plc)
Dia
Material and Finish
.065
[1.65]
Typ.
B Spaces at
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under-
plated .000050 [0.00127] nickel
.025
[0.64]
= C
.140
[3.56]
.085
[2.16]
.340
[8.64]
.305
[7.75]
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
.190
[4.83]
(2 Plc)
.175
[4.45]
.063
[1.57]
(2 Plc)
.100
[2.54]
Min
.136
[3.45]
(2 Plc)
Related Product Data
Mating Receptacles — pages 20
and 26
D
Recommended PC Board Layout
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
Performance Specifications
page 29
—
Technical Documents — page 29
Product Specification 108-1443
Application Specification
114-7010
Header
Dimensions
No. of
Pos.
Part Numbers
Latching
Packaging
— Tube
A
B
C
D
Non-Latching
10
20
30
40
50
60
70
80
100
.630 [16.00]
.880 [22.35]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
1.880 [47.75]
2.130 [54.10]
2.380 [60.45]
2.880 [73.15]
9
.225 [5.72]
.475 [12.07]
.725 [18.42]
.975 [24.77]
1.225 [31.12]
1.475 [37.47]
1.725 [43.82]
1.975 [50.17]
2.475 [62.87]
.550 [13.97]
.800 [20.32]
1.050 [26.67]
1.300 [33.02]
1.550 [39.37]
1.800 [45.72]
2.050 [52.07]
2.300 [58.42]
2.800 [71.12]
5-104895-1
5-104895-2
5-104895-3
5-104895-4
5-104895-5
5-104895-6
5-104895-7
5-104895-8
6-104895-0
5-104894-1
5-104894-2
5-104894-3
5-104894-4
5-104894-5
5-104894-6
5-104894-7
5-104894-8
6-104894-0
19
29
39
49
59
69
79
99
Note: All part numbers are RoHS compliant.
24
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Cable-to-Board Connectors
Product Facts
I Double-row receptacle
connectors provide cable-
to-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
I IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
I Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
I Reliable single beam
receptacle contact design
I Duplex plated receptacle
contacts; gold plated in
mating area, tin in
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
stranded round conductor
mounted right-angle header.
termination area
ribbon cable with conductor The cable connector without
I Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
I Connectors available with or connectors without a latch
without metal latch
I Connectors without latches
are polarized to help
prevent mismating
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the TE
manual tooling shown on
page 28.
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
AMPMODU 50/50 Grid
Connector System. Cable
will mate with the vertical
headers (page 21), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 24).
I Recognized under the
Component Program of
Underwriters
The cable connectors
feature reliable single-
beam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
Laboratories Inc.,
File No. E28476
R
The latching version of
the cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
I Certified by Canadian
Standards
R
Association
File No. LR7189
25
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
.280
[7.11]
.627
[15.94]
.690
[17.56]
Related Product Data
Mating Headers — pages 21 and 24
(latching)
D
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 27
.120
[3.05]
Termination Tooling — page 28
Performance Specifications —
page 29
.050
[1.27]
Typ
B Spaces at
.050 [1.27] = C
Technical Documents — page 29
Product Specification 108-1443
Application Specification
408-9817, 408-9909
.284 .327
[7.21] [8.31]
.050
[1.27]
Packaging — Tube
Receptacle
Dimensions
C
No. of
Pos.
Part Numbers
A
B
D
With Latch
Without Latch
5-104893-1
5-104893-2
5-104893-3
5-104893-4
5-104893-5
5-104893-6
5-104893-7
5-104893-8
6-104893-0
10
20
30
40
50
60
70
80
100
.578 [14.68]
.828 [21.03]
1.078 [27.38]
1.328 [33.73]
1.578 [40.08]
1.828 [46.43]
2.078 [52.78]
2.328 [59.13]
2.828 [71.83]
4
.200 [5.08]
.266 [6.76]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
5-104892-1
5-104892-2
5-104892-3
5-104892-4
5-104892-5
5-104892-6
5-104892-7
5-104892-8
6-104892-0
9
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.450 [62.23]
14
19
24
29
34
39
49
Note: All part numbers are RoHS compliant.
26
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Terminating Covers for Cable Connectors
Material
Glass-filled thermoplastic,
black, 94V-0 rated
A
.191
[4.85]
Related Product Data
Connectors used with Covers —
page 26
Termination Tooling — page 28
Technical Documents — page 29
Product Specification 108-1443
.277
[7.04]
Application Specification
408-9817, 408-9909
Packaging — Plastic bag
No. of
Pos.
Dimension
A
Terminator Cover
Part Numbers
10
20
.565 [14.35]
.815 [20.70]
1.065 [27.05]
1.315 [33.82]
1.565 [39.75]
1.815 [46.10]
2.065 [52.45]
2.315 [58.80]
2.815 [71.50]
104891-1
104891-2
104891-3
104891-4
104891-5
104891-6
104891-7
104891-8
1-104891-0
30
40
50
60
70
80
100
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
Note: All part numbers are RoHS compliant.
27
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Application Tooling for Cable Connectors
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 26.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro-
vide strain relief for the
completed connection.
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
For tooling information, call
Technical Support Center
1-800-522-6752.
Note: Refer to TE Instruction
Sheets 408-9817 (Frame Assembly
91295-1) and 408-9909 (Cover
Closing Kit 543518-1) for complete
termination/tooling information.
Note: All part numbers are RoHS compliant.
28
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Performance Specifications
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force — 1.0 oz [0.28 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (30°C T rise): .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 16 milliohms max. (initial)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Cable-to-Board Connectors
Mating Force — 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch — .5 oz [0.14 N] min. per contact
Durability — Tested to 200 cycles min.
Current Rating — (10°C T rise); .5 ampere per contact
Operating Temperature Range — -65°C to +105°C
Termination Resistance — 25 milliohms max. (initial and final)
Insulation Resistance — 5000 megohms min. (initial)
Dielectric Withstanding Voltage — 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332
108-1443
AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010
AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817
408-9909
Manual Miniature Application Frame Assembly 91295-1
Cover Closing Kit 543518-1
Note: All part numbers are RoHS compliant.
29
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System
Features/ Benefits
I Available in 2 to
20 positions
I Applicable Wire:
20~28 AWG
I Wire connectors supplied
on-tape and suitable for
mass termination of
28 AWG [0.08 mm2 to
0.09 mm2] ribbon cable
I Tin plated contact design
I Guaranteed minimum
contact force of 2.0 N
I Fretting corrosion proof
thanks to additional
positioning spring
member
I Full range of application
tooling from hand tool to
fully automated equipment
Miniaturization and the
relative movements caused
optimization of both func-
tions and also leads to
relatively simple contact
shapes.
trend towards higher den-
sity of electronic functions
on a substrate led to the
introduction of smaller
by vibrations/thermal
expansion between male
and female contacts are
absorbed. By preventing
movements on the contact
spot, a gas tight connection
can be guaranteed under
all circumstances.
Because of their shapes
contacts can be post-
interconnection systems.
The Micro-MaTch connector
family, with it’s contact
plated, leaving no bare
edges in the contact and
wire slot area. The contact
spring system features an
additional spring member —
the positioning spring —
which compensates posi-
tional tolerances. In this way
the contact spring can be
fully optimized for its basic
function, so that the rela-
tively high contact force,
required for tin plated
spacing of 1.27 mm, fully
complies with the electronic
packaging requirements of
today and the future. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
board and board-to-board
interconnections.
The Micro-MaTch contact
concept shown on this page
is essentially different from
other systems available.
The contact spring is
located in the board con-
nector and not in the cable
connector, which is usually
the case. The counter part,
incorporated in the cable
connector, is a simple pin,
either with an insulation dis-
placement section, suitable
for the mass-termination of
cable or with a kinked sol-
der leg to be soldered onto
a PC Board. The separation
of these two basic functions
of the contact system —
contact force generation
and wire termination —
1
2
3
contact systems, can be
guaranteed under all
circumstances.
By its design the traditional
failure mode in tin plated
connections, fretting corro-
sion, is prevented. Due to
an additional positioning
spring in the female part,
1. Contact Pin
2. Contact Spring
3. Positioning
The Micro-MaTch contact
spring system is absolutely
fretting corrosion proof by
its design.
enables the independent
30
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Overview Technical Data
Technical Data
Centerline:
1.27 mm (staggered)
Number of Positions:
Contact Material:
Contact Finish:
Housing Material:
4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positions
Phosphor bronze
Tin over Nickel
Thermoplastic polyester, red, glass-filled
For surface mount versions polyamide 4.6
Flammability rating:
UL-recognized:
per UL 94 V-0
File E28476 Vol. 23 Section 4
Contact Resistance:
Insulation Resistance:
Nominal Voltage:
10 MΩ max.
1.000 MΩ min.
230 V
Current Rating:
1.5 A max.
Temperature Range:
Mating Force:
-40° C to +105° C (operating)
5N max. per contact
Unmating Force:
1N min. per contact
Minimum Contact Force:
Product Specification:
Application Specification:
RoHS Compliance Code:
2N min.
108-19052
114-19016, 114-19051
Always RoHS compliant (directive 2002/95/EC) for all types
Lead-free Process Capable: Wave solder capable to 265° C for through hole versions
reflow solder capable to 260° C for SMD versions
PC Board Connectors
PC Board Thickness:
1.6 mm nominal
PC Board Hole Diameter:
0.8 mm for solder connectors
Ribbon Connectors
Cable Type:
Conductor Spacing:
Conductor Diameter:
Ribbon cable, UL Style 2651
1.27 mm (.050")
Solid 0.30 mm diameter Stranded 0.08 mm2
7 x 0.12 - 0.13 mm (other diameters and/or configurations
on request)
Insulation Type:
semi-rigid PVC
0.9 0.1 mm
Insulation Diameter:
Discrete Wire (COSI) Connectors
Cable Type :
AWG 28-24 and 24-20
31
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (3 Dimensions)
Male Connectors
COSI
Part Number 338095
Male-on-Wire
Part Number 215083
Male-on-Board
Part Number 215464
Part Number 338096
Part Number 338097
Paddle Board
Part Number 215570
Female Connectors
1
4
8
2
3
Female Top Entry
Part Number 215079
5/6
7
Female Side Entry
Part Number 215460
9
10
SMD Top Entry
Part Number 188275
Image
1
2
Description (see also page 33)
Wire-to-Board through hole
Board-to-Board through hole
3
Wire-to-Board (discrete wire), through hole
Wire-to-Board right angle, through hole
Board-to-Board right angle, through hole
Board-to-Board right angle, through hole
Wire-to-Board right angle (discrete wire), through hole
Wire-to-Board surface mount
4
5
6
7
8
9
Board-to-Board surface mount, through hole
Wire-to-Board (discrete wire), surface mount
10
32
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (2 Dimensions)
Male Connectors
COSI
Part Number 338095
Male-on-Wire
Part Number 215083
Male-on-Board
Part Number 215464
Paddle Board
Part Number 215570
Part Number 338096
Part Number 338097
Female Connectors
1
4
8
2
3
A
A
C
A
B
B
B
C
Female Top Entry
Part Number 215079
C
C
6
7
A
5
A
C
B
E
C
A
B
B
G
E
A
C
B
D
C
D
F
Female Side Entry
Part Number 215460
C
C
D
9
10
A
C
A
A
B
B
B
SMD Top Entry
D
D
D
Part Number 188275
Dimensions (mm)
Image
A (max)
B (max)
7.5
C
D (max)
—
E (max)
—
F(max)
G (max)
—
1
2
5.2
5.2
5.2
8.4
5.2
5.2
5.2
5.2
5.2
5.2
2.54
2.54
2.54
2.54
2.54
2.54
2.54
—
—
—
—
—
1.6
—
—
—
—
—
6.2
—
—
—
3
9.7
—
—
—
4
5.9
1.5
1.5
1.5
1.5
7.1
7.1
7.1
—
—
5
5.9
7.0
—
—
6
5.9
2.8
—
7
5.9
10.6
—
8
8.5
—
9
7.1
2.54
—
—
—
10
10.7
—
—
33
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Top Entry
1.5
[.059]
5.1
[.200]
Max.
4.0
[.157]
This connector version
incorporates the patented
Micro-MaTch contact spring
system and is designed to
be soldered onto PC
Boards with a nominal thick-
ness of 1.6 mm.
1.9
[.074]
3.1
[.122]
The solder legs are
1.27
indented, providing firm
retention of the connector
before and during the
soldering operations.
[.050]
A
B Max.
As polarization is accom-
plished directly between the
Micro-MaTch male connec-
tors and the PC Board, this
top entry female connector
does not have any polariz-
ing features. Therefore, the
orientation of the connector
on the PC Board is irrele-
vant.
1.40
2.54
1.80
[.071]
[.055]
[.100]
1.27
[.050]
1.50
[.059]
Hole for
Polarization Pin
0.80
[.031]
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
No. of Positions
A
B
250 Connectors/Box
7-215079-4
7-215079-6
7-215079-8
8-215079-0
8-215079-2
8-215079-4
8-215079-6
8-215079-8
9-215079-0
4
3.81
7.1
215079-4
215079-6
6
6.35
9.7
8
8.89
12.2
14.7
17.3
19.8
22.4
24.9
27.4
215079-8
10
12
14
16
18
20
11.43
13.97
16.51
19.05
21.59
24.13
1-215079-0
1-215079-2
1-215079-4
1-215079-6
1-215079-8
2-215079-0
34
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector, Side Entry
B
Max.
3.1
[0.12]
5.8
[0.23]
This connector version is
identical to the top entry
version with two exceptions:
3.85
[0.15]
I The solder legs are
parallel to the mating
face of the connector
instead of perpendicular.
2.54
[0.09]
5.3
[0.21]
Max.
I It's housing is polarized,
so that polarization is
accomplished directly
between the two mating
connectors. Proper
0.90
[.039]
1.27
[.050]
orientation of the
2.54
[.100]
connectors on the PC
Board is relevant here.
A
2.54
[0.09]
0.80
[0.03]
1.27
[0.05]
Nom.
2.54
[0.09]
(N-1)x1.27
Recommended PCB Hole Layout
Not Solder Side Shown
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
(1500) 215460-4 (1500)
215460-6
No. of Positions
A
B
250 Connectors/Box
7-215460-4
7-215460-6
7-215460-8
8-215460-0
8-215460-2
8-215460-4
8-215460-6
8-215460-8
9-215460-0
4
3.81
7.1
6
6.35
9.7
8
8.89
12.2
14.7
17.3
19.8
22.4
24.9
27.4
215460-8
10
12
14
16
18
20
11.43
13.97
16.51
19.05
21.59
24.13
1-215460-0
1-215460-2
1-215460-4
1-215460-6
1-215460-8
2-215460-0
35
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Female-on-Board Connector Surface Mount Device (SMD)
Tape for Vacuum P&P
1.90
[.075]
1.27
[.050]
This SMD connector version
is designed for standard
reflow and infrared solder
processes (“FULL SMD”).
Polarization is accom-
plished by the housing,
therefor no polarization
holes in the PC Board are
required.
A=(N-1)*1.27
0.5B-2.5
5.0
[.197]
5.0
[.197]
The contact is designed with
an additional spring to com-
pensate for differences in
thermal expansion between
housing and PCB. Due to
this feature, tension on
7.0
[.276]
B
A
2.54
[.100]
solder joints is prevented.
5.0
[.197]
1.50
[.059]
3.00 Minimum
[.118] Solder Path Length
1.50
[.059]
Recommended
PCB Layout
Top View
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in embossed
tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
No. of Positions
A
B
250 Connectors/Box
7-188275-4
7-188275-6
7-188275-8
8-188275-0
8-188275-2
8-188275-4
8-188275-6
8-188275-8
9-188275-0
4
3.81
7.1
188275-4
188275-6
6
6.35
9.7
8
8.89
12.2
14.7
17.3
19.8
22.4
24.9
27.4
188275-8
10
12
14
16
18
20
11.43
13.97
16.51
19.05
21.59
24.13
1-188275-0
1-188275-2
1-188275-4
1-188275-6
1-188275-8
2-188275-0
36
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
MPaigcreoH-MeaadT_c1h2M_HineiavtCudreBdConnectorSystem —
Male-on-Board Connector
A
5.00
[.197]
A
A
This male connector version
is designed to be soldered
onto PC Boards with a nom-
inal thickness of 1.6 mm.
B
2.54
[.100]
1.27
[.050]
The solder legs are
indented for firm retention of
the connector in the
PC Board.
6.75
[.266]
The connector housing
features a polarizing pin
on one end for proper
orientation of this connector
version.
7.10
[.280]
Section A-A
0.80
[.031]
2.54
[.100]
1.27
[.050]
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. To enable automatic Pick & Placement, connectors are always packed in
embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum Pick & Placement.
4. For this connector no additional solder hold down is required.
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
No. of Positions
Mates with:
X-338095-X
X-215083-X
X-215464-X
X-338728-X
A
B
250 Connectors/Box
7-215464-4
7-215464-6
7-215464-8
8-215464-0
8-215464-2
8-215464-4
8-215464-6
8-215464-8
9-215464-0
4
3.81
8.2
215464-4
215464-6
6
6.35
10.7
13.3
15.8
18.3
20.8
23.4
25.9
28.4
8
8.89
215464-8
10
12
14
16
18
20
11.43
13.97
16.51
19.05
21.59
24.13
1-215464-0
1-215464-2
1-215464-4
1-215464-6
1-215464-8
2-215464-0
37
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Male-on-Wire Connector
A
A
For the wire connection, a
well-known type blade with
a single slot is used. The
insides of the slots are tin
plated for stable and
A Max.
B Max.
5.10
[.201]
reliable connections.
C
Max.
The connector is supplied
with a pre-assembled cover,
providing excellent position-
ing of the ribbon cable
before and during
the insulation displacement
process.
10.20
[.402]
After termination the cover
is held in place by each
individual contact in addi-
tion to two plastic latches at
both ends of the connector.
Section A-A
Remark:
The Micro-MaTch Male-on-Wire connector is specifically designed to be disengaged from
its counterpart by pulling the cable in the appropriate direction.
Notes:
1. Connectors are always sideways mounted onto an adhesive tape.
2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.
3. At additional charge a special packaging option is available: 250 diameter of 250 mm,
packed in a dedicated dispenser box.
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338070-X
X-100411-X
X-188431-X
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
No. of Positions
A
B
C
250 Connectors/Box
7-215083-4
7-215083-6
7-215083-8
8-215083-0
8-215083-2
8-215083-4
8-215083-6
8-215083-8
9-215083-0
9-215083-4
4
8.6
11.1
3.6
5.4
3.81
215083-4
215083-6
6
8.0
6.35
8
10.5
13.0
15.6
18.1
20.7
23.2
25.7
30.8
8.89
215083-8
10
12
14
16
18
20
24
16.2
18.7
21.3
23.8
26.3
28.9
34.0
11.43
13.97
16.51
19.05
21.59
24.13
29.21
1-215083-0
1-215083-2
1-215083-4
1-215083-6
1-215083-8
2-215083-0
2-215083-4
38
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Paddle Board Connector
A
5.00
[.197]
A
A
Direct soldering of a ribbon
cable onto a PC Board is
a very difficult job with the
smaller sizes of ribbon
cable. If such a permanent
cable connection is
B
2.54
[.100]
1.27
[.050]
required, the application
can be facilitated by using
this connector type.
6.75
[.266]
The Paddle Board connec-
tor is applied to the ribbon
cable with the same appli-
cation tooling, available
for the termination of the
Male-on-Wire connector.
7.10
[.280]
Section A-A
The solder legs are
0.80
[.031]
indented and provide
mechanical retention of the
connector/cable assembly
in the PC Board before and
during soldering.
This Paddle Board connec-
tor version is designed to
be soldered onto PC
Boards with a nominal thick-
ness of 1.6 mm.
2.54
[.100]
1.27
[.050]
2.54
[.100]
Typical Hole Pattern
Not Solder Side Shown
Notes:
1. To enable automatic Pick & Placement, connectors are always packed
in embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum
Pick & Placement.
4. For this connector no additional solder hold down is required.
No mate — direct soldering
of ribbon cable onto the
PC Board
Dimensions (mm)
Part Numbers
2500 Connectors/Reel
No. of Positions
A
B
C
250 Connectors/Box
7-215570-4
7-215570-6
7-215570-8
8-215570-0
8-215570-2
8-215570-4
8-215570-6
8-215570-8
9-215570-0
—
4
8.6
11.1
3.6
5.4
3.81
215570-4
215570-6
6
8.0
6.35
8
10.5
13.0
15.6
18.1
20.7
23.2
25.7
30.8
8.89
215570-8
10
12
14
16
18
20
24
16.2
18.7
21.3
23.8
26.3
28.9
34.0
11.43
13.97
16.51
19.05
21.59
24.13
29.21
1-215570-0
1-215570-2
1-215570-4
1-215570-6
1-215570-8
2-215570-0
2-215570-4
39
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Crimp On Snap In (COSI) Connector
C
2.54
[.100]
1.27
[.050]
2.65
[.104]
Basic Part Number 338095
and Contacts Part Numbers
338096 and 338097
B Max.
A Max.
5.10
[.201]
Max.
This crimp version for dis-
crete Wire-to-Board applica-
tions is fully compatible with
all female connectors of the
Micro-MaTch family.
9.10
[.358]
Max.
0.82
[.032]
12.40
[.488]
Max.
Insulation and wire crimp
barrel are copies of the
well proven AMPLIMITE
contacts. After mating with
a Micro-MaTch female
connector the contacts are
fully protected by isolating
plastics. Contacts are made
of a pre-tinned phosphor
bronze.
0.70
[.027]
6.00
[.236]
Ref.
Contacts are supplied in a
range for 24-20 AWG and
28-24 AWG. For repair oper-
ations an extraction tool is
available; Part Number
734873-1.
0.40
[.016]
0.20
[.008]
0.25 Cut Off
[.010] Max.
8.65
[.341]
Max.
Notes:
1. Contacts can be crimped using a G-terminator or mini stripper crimper based applicator.
2. For the contacts on strip the standard packaging quantity is 15.000 pcs on a reel
with a diameter of 600 mm.
3. For repair/service contacts are packaged 750 pcs. Per reel, to be used with handtools.
4. The housings are bulk packed in a box with a packaging quantity varying from 200 to
900 pcs per box.
Mates with:
X-338095-X
Wire Size Range
Part Number
Large reel, 15.000
Insulation Diameter
(mm)
(mm2)
(AWG)
28-24
24-20
Small reel, 750
1-338096-1
0.08-0.20
0.20-0.50
0.76-1.00
1.27-1.52
338096-1
338097-1
1-338097-1
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-215079-X
X-338068-X
X-338069-X
X-338670-X
X-100411-X
X-188431-X
Dimensions (mm)
Part Numbers
No. of Positions
A
B
C
2500 Connectors/Reel
338095-4
250 Connectors/Box
4
6
7.2
8.4
10.9
13.5
16.0
18.5
21.1
23.6
26.2
28.7
3.81
900
700
500
450
400
350
300
250
200
9.8
12.3
14.9
17.4
19.9
22.5
25.0
27.6
6.35
338095-6
8
8.89
338095-8
10
12
14
16
18
20
11.43
13.97
16.51
19.05
21.59
24.13
1-338095-0
1-338095-2
1-338095-4
1-338095-6
1-338095-8
2-338095-0
40
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System — Specials
SMC Connector Part Number 100411
This connector type enables a solderless application to the
printed circuit board. Contact is made on the surface of the
PCB, enabling the use of paperphenol and epoxy boards
with both drilled and punched holes. This connector is suit-
able for both Wire-to-Board as Board-to-Board connections.
Because this connector is mounted on the solder side, the
components of both PCB’s in a parallel Board-to-Board
application, will be in the same direction. By this, the stack-
ing of two or more PCB’s is possible. Application tooling
available on request.
Mates with:
X-215464-X
X-338095-X
X-215083-X
Locking Latch Part Numbers 338068/338069/338070
For Wire-to-Board applications this feature provides an
audible click during mating. This feature is available for the
standard Micro-MaTch female connectors. Cross reference
is made by base part number x-338068-x instead of
x-215079-x, x-338069-x instead of x-188275-x and
x-338070-x instead of x-215460-x (standard large reel
packaging only).
Mates with:
X-338095-X
X-215464-X
X-338728-X
X-215083-X
In-board SMD Part Number 188431
This connector is only tooled in 20 position (9-188431-0)
and packaged in embossed tape according to EIA481
standards. The connectors are equipped with a feature for
vacuum Pick & Placement. It enables the mounting of a
PCB with the solder side direct behind e.g. a display. It is
also possible to obtain a parallel BTB application with an
extreme low PCB distance of 4.2 mm.
Mates with:
X-338095-X
X-215464-X
X-338728-X
X-215083-X
Male SMD Part Number 338728
This connector enables the possibility to have a full SMD
to SMD Board-to-Board application. It mates with all
Micro-MaTch female connectors, and will be packaged
according EIA 481 standard. Consult TE for more information.
Mates with:
X-215079-X
X-215460-X
X-188275-X
X-338069-X
X-338070-X
X-188431-X
X-338068-X
41
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Application Tooling
Pistol Handgrip Tooling. This is a
handtool for terminating Micro-MaTch
Male-on-Wire and Paddle Board con-
nectors. Meant for small quantities or
repair services. Pistol handgrip and
adapter must be ordered separately.
Standard Pistol Handgrip Part
Pistol Handgrip Adapter Set Part
Number 734155-1. This basic tool can Number 734024-1. This adapter can
be used for Micro-MaTch and other
applications.
be used for Micro-MaTch terminations,
together with the pistol handgrip.
Bench Press Tooling Part Number
733280-3. This complete tool includes
a Micro-MaTch dedicated tool set
Bench Press Part Number 91085-2.
This basic press is a hand operated
version. This press can also be
Bench Press Tool Set Part Number
733278-2. This tool set is designed
especially for Micro-MaTch. It fits both
pneumatically and hand operated press.
mounted on the bench press 654173-2. obtained in a pneumatically operated
version; Part Number 91112-3.
COSI Hand Tooling Part Number
734870-1 for 24-20 AWG, and Part
Number 734870-2 for 28-24 AWG.
These dedicated tools can be obtained
for services/repair applications.
G-terminator Part Number 677-499-1. Applicators for G-terminator.
Part Number 677894-1 for AWG 28-
24 (Part Number 338096-1) and
Part Number 677895-1 for AWG 24-
20 (Part Number 338097-1).
42
Catalog 82012
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Application Tooling (Continued)
Semiautomatic Tooling Part Number 677410-1.
This tool can be used for Micro-MaTch lead end and for
daisy chain assembly applications.
Semiautomatic Tooling Part Number 677412-5 for
Micro-MaTch only and Part Number 1-677412-0 for both
Micro-MaTch and other ribbon cables. This machine can be
used for lead end assemblies.
Connector Dispenser Part Number 677463-1.
The dispenser accepts the Micro-MaTch standard reels
(2500 pcs/reel). It automatically removes the pre-set
connector quantity from the reel and drops it in a separate
box. Quantity can easily be programmed by the user.
43
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Lead Assembly
It is possible to deliver
custom made Micro-MaTch
lead assemblies, both cable
end assemblies and daisy-
chain assemblies,
in all positions between
4 and 20 in all required
cable lengths. All leads are
100% electrically tested on
shortcut and connection
before shipment. A flexible
7 stranded cable is used for
easy assembly. Special
cable on request. For order
information contact TE.
Micro-MaTch Miniature Connector System Sample Box
Sample Box
Part Number 1377074-1
This box includes samples
of all connector types within
the Micro-MaTch family,
examples of leads, printed
circuit boards and a
CD-ROM. The CD-ROM
includes an electronic
version of this catalogue, an
animation of the contact
principle and CAD files of
all connector types.
This sample box is an aid
in visualizing the variety
of applications where
Micro-MaTch can be
implemented.
44
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
UPangiveeHresaldI_/1O2P_iHneCvoCndnBedctorswithout Mounting Ears
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Without Latches
With Latches
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
B
Instruction Sheets
408-9720
408-6939
I Recognized under the
Component Program
of the Underwriters
.015
0.754
[19.15
0.36
]
R
Laboratories, Inc.
UL File No. E28476
I Certified by the
A
Canadian Standards
R
Pin Length
.240
[6.10]
Association,
File No. LR 7189
.330
[8.38]
Accessories
Strain Relief — page 67
Ejector Latch — page 63
Military Polarizer — page 63
Pins On Centerlines
Position No.1
Indicator
.100
[2.54]
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Dimensions
Part Numbers of Connectors with:
No. of
Positions
A
B
No Latches
Short Latches1
Long Latches2
.992
25.20
1.072
27.23
103,4
1-111446-4
1-111492-5
1-111504-4
Related Product Data
Mateable Receptacles Novo —
pages 48-51
Female Socket Connectors —
pages 52-55
1.192
1.272
143,4
16
20
24
26
30
34
40
44
50
60
64
1-111446-5
1-111446-6
1-111446-8
1-111446-9
2-111446-0
2-111446-1
2-111446-2
2-111446-3
2-111446-4
1-111446-7
2-111446-5
2-111446-6
1-111492-6
1-111492-7
—
1-111504-5
1-111504-6
1-111504-7
1-111504-8
—
30.28
32.31
1.292
32.82
1.372
34.85
1.492
37.90
1.572
39.93
1.692
42.98
1.772
45.01
1-111492-9
2-111492-0
2-111492-1
2-111492-2
2-111492-3
2-111492-4
2-111492-5
2-111492-6
—
1.792
45.52
1.872
47.55
1.992
50.60
2.072
52.63
2-111504-0
—
2.192
55.68
2.272
57.71
2.492
63.30
2.572
65.33
—
2.692
68.38
2.772
70.41
2-111504-3
—
2.992
76.00
3.072
78.03
3.492
88.70
3.572
90.73
—
3.692
93.78
3.772
95.81
2-111504-6
1 Use short latch versions when mating connectors without strain reliefs are used.
2 Use long latch versions when mating connectors with strain reliefs are used.
3 No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
Note: All part numbers are RoHS
compliant.
45
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal I/O Pin Connectors with Slotted Mounting Ears
Material and Finish
Housing and Cover — Flame retardant
UL 94V-0 rated thermoplastic, black
Contacts — Phosphor bronze, .000100
[0.00254] min. tin on termination end,
.000030 [0.00762] min. gold on mating
end, both over .000050 [0.00127] min.
nickel
Without Latches
With Latches
Technical Documents
Product Specification
108-1336
Application Specification
114-7011
Instruction Sheets
408-9720
B
408-6939
.015
0.36
.754
[19.15
I Recognized under the
Component Program
of the Underwriters
]
R
Laboratories, Inc.
UL File No. E28476
A
I Certified by the
Pin Length
Canadian Standards
R
.240
[6.10]
Association,
File No. LR 7189
.330
[8.38]
Accessories
Ejector Latch — page 63
Military Polarizer — page 63
Terminates 26 and 28 AWG solid or
stranded ribbon cable. See Application
Specification for cable requirements.
Pins On Centerlines
.100 [2.54]
Position No.1
Indicator
Dimensions
Part Numbers of Connectors with:
No Latches
No. of
Positions
A
B
Short Latches1
Long Latches2
.992
25.20
1.476
37.49
103,4
5111448-1
1-111494-5
1-111506-6
Related Product Data
Mateable Receptacles Novo —
1.192
1.676
143,4
16
20
24
26
30
34
40
44
50
60
64
—
5111448-3
5111448-4
5111448-5
—
—
—
1-111506-8
—
30.28
42.57
pages 48-51
1.292
32.82
1.776
45.11
Female Socket Connectors —
pages 52-55
—
1.492
37.90
1.976
50.19
1-111494-8
1-111494-9
—
1.692
42.98
2.176
55.27
2-111506-0
2-111506-1
—
1.792
45.52
2.276
57.81
1.992
50.60
2.476
62.89
5111448-7
5111448-8
5111448-9
—
2-111494-0
2-111494-1
2-111494-2
2-111494-3
2-111494-4
2-111494-5
2-111494-6
2.192
55.68
2.676
67.97
—
2.492
63.30
2.976
75.59
2-111506-4
2-111506-5
1-111506-4
—
2.692
68.38
3.176
80.67
2.992
76.00
3.476
88.29
—
3.492
88.70
3.976
100.99
—
3.692
93.78
4.176
106.07
1-5111448-3
—
1 Use short latch versions when mating connectors without strain reliefs are used.
2 Use long latch versions when mating connectors with strain reliefs are used.
3 No slot on end with position No. 1 indicator for 10 and 14-position connectors.
4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors.
Note: All part numbers are RoHS
compliant.
46
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
EUROLATCH Receptacles, 64-Position
(Three-Row Housings, Two Rows Loaded)
78.74
[3.100]
3.48
[.137]
Housing Assembly with
Cover (Preassembled)
Row A
10.49 8.46
[.413] [.333]
8.46
[.333]
Row B
Row C
84.89
[3.342]
Housing
Assembly
Cover
89.92
[3.54]
94.74
[3.730]
Material and Finish
Housing and Cover — UL 94V-0
rated thermoplastic, black
Contacts — Phosphor bronze, duplex
plated 0.00076 [.000030] gold on
post/pin mating end, 0.00254-0.00508
[.000100-.000200] tin on termination
end, with entire contact underplated
0.00127 [.000050] nickel.
6.35
[.250]
10.95
[.431]
14.43
[.568]
Related Product Data
18.57
[.731]
Mateable Pin Connectors —
Eurocard Type C and Type R—
Selection Guide 82650,
See Catalog 82721
Terminated
Ribbon Cable —
Part Number 2-57040-2 or
Part Number 2-57034-5 (64 conductor)
84.66
[3.333]
Application Tooling — pages 70-74
Technical Documents
Product Specifications
108-46003 EUROLATCH Receptacles
DIN 41612
2.54
[.100]
1.27
[.050]
IEC 603-2
Instruction Sheet
408-9156
2.79 Dia.
Dia.
[.110]
(2 Holes)
I Recognized under the
Component Program
of the Underwriters
R
Laboratories, Inc.
UL File No. E28476
I Certified by the
Canadian Standards
R
Association,
File No. LR 7189
Contact
Receptacle
Kit No.
(Preassembled)
Rows
Loaded
A and C
746603-4
Note: All part numbers are RoHS compliant.
47
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Novo Connectors
Product Facts
I .100 x .100 [2.54 x 2.54]
mating grid for .050 [1.27]
pitch ribbon cable
I Tuning fork contact offers a
military approved design, at
an economical cost
I Polarization options include
military, center and military,
and dual bar
I Choice of duplex gold plating
on contact mating area
I Insulation displacement
contacts for fast, economical
mass terminations
I Contact design provides
uniform latching of contacts
and housing with connector
cover
I Housing, cover and strain
relief made of UL 94V-0
rated thermoplastic material
Novo receptacles offer a
dual contact interface with
all normal force created by
metal-to-metal contact. This
provides a higher degree of
contact reliability.
Housings are made of
I Selected 10 thru 64-position
configurations available
UL 94V-0 thermoplastic
material and feature military,
military and center, and
dual bar polarization.
I Accepts wire size range
28-26 AWG [0.08-0.15 mm2],
solid or stranded
Optional accessories
include a snap-on strain
relief and pull loops.
Novo receptacles feature
two rows of contacts on
.100 x .100 [2.54 x 2.54]
centerlines in select sizes
from 10 to 64 positions.
Contacts mate with .0252
[0.642] or round posts with
.245 [6.22] max. and .175
[4.45] min. lengths. The
Novo tuning fork contact
offers a military-approved
design, and at a lower cost.
I Snap-on strain relief and
choice of pull loops
available
Novo receptacles can be
terminated to .050 [1.27]
pitch ribbon cable by a
wide variety of one-step
application tooling.
I One-step termination with
Novo tooling
I Recognized under the
Component Program
of the Underwriters
Assemblies are packaged
in tubes for ease of handling,
protection and termination.
R
Laboratories, Inc.
UL File No. E28476
I Certified by the
Canadian Standards
Contacts are made of
phosphor bronze and
are available in a choice
of duplex .000015 [0.00038]
or .000030 [0.00076] gold
in the mating area, and
.000100 [0.00254] tin in the
termination area, with the
entire contact underplated
with .000050 [0.00127]
nickel.
R
Association,
File No. LR 7189
48
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Novo Receptacles, Military Polarized* .100 x .100 [2.54 x 2.54] Centers
.460
[11.68]
C
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
.135
[3.43]
.100
[2.54]
.240
[6.10]
.100
[2.54]
Cover
Housing
Assembly
Position No. 1
Index Slot
•
.329
[8.36]
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
.422
.464
[10.72] [11.79]
.570
[14.48]
Ref.
.629
Ref.
Ref.
.650
[16.51]
Ref.
[15.98]
Ref.
.093
[2.36]
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Terminated
with Cover
B
Contacts — Phosphor bronze, duplex
plated (See chart below)
Terminated
with Cover
and Strain Relief
.106
[2.69]
A
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
.100
[2.54]
There is no polarization slot on
this end of 10- and 14-position
receptacles.
•
Housing Assembly and Cover
Dimensions
No. of
Pos.
Contact
Plating
Strain Relief
Part No.
Receptacle
(Preassembled)
Accessories
A
B
C
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
499252-5
499252-5
499252-9
499252-9
499252-8
499252-8
499252-2
499252-2
1-499252-0
1-499252-0
499252-3
499252-3
1-499252-2
1-499252-2
499252-6
499252-6
499252-1
499252-1
499252-4
499252-4
499252-7
499252-7
1-499252-3
1-499252-3
1658620-1
1658623-1
1658620-2
1658623-2
1658620-3
1658623-3
1658620-4
1658623-4
1658620-5
1658623-5
1658620-6
1658623-6
1658620-7
1658623-7
1658620-8
1658623-8
1658620-9
1658623-9
1-1658620-0
1-1658623-0
—
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief Dimensional
Information — page 68
.450
.680
.400
10
11.43
17.27
10.16
.650
16.51
.880
22.35
.600
15.24
14
16
20
24
26
30
34
40
50
60
64
.750
19.05
.980
24.89
.700
17.78
Application Tooling — pages 70-74
.950
24.13
1.180
29.97
.900
22.86
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Ribbon Cable Connectors
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable docu-
ments.
1.150
29.21
1.380
35.05
1.100
27.94
1.250
31.75
1.480
37.59
1.200
30.48
1.450
36.83
1.680
42.67
1.400
35.56
1.650
41.91
1.880
47.75
1.600
40.64
1.950
49.53
2.180
55.37
1.900
48.26
2.450
62.23
2.680
68.07
2.400
60.96
2.950
74.93
3.180
80.77
2.900
73.66
—
1-1658620-2
—
3.150
80.01
3.380
85.85
3.100
78.74
1.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
2.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep-
arately using the component part nos. listed above.
*These receptacles can be used in
applications requiring non-polariza-
tion, as well as military polarization.
All part numbers are RoHS compliant.
49
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Novo Receptacles, Center and Military Polarized*
.100 x .100 [2.54 x 2.54] Centers
.140
[3.56]
C
.460
[11.68]
.100
[2.54]
.135
[3.43]
Housing Assembly with
Cover (Preassembled) and
Strain Relief (Optional)
.240
[6.10]
.100
[2.54]
Polarization
Bar
.130
[3.30]
D
D
Cover
Housing
Assembly
Position No. 1
Index Slot
•
.329
[8.36]
.422
[10.72] [11.79]
Ref.
.464
Contacts mate with .025 [0.64] sq.
or round pins with .245 [6.22] max.
and .175 [4.45] min. lengths.
.570
[14.48]
Ref.
.650
[16.51]
Ref.
Ref.
.629
[15.98]
Ref.
.093
[2.36]
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Terminated
with Cover
Contacts — Phosphor bronze, duplex
B
A
Terminated
with Cover
and Strain Relief
plated (See chart below)
.106
[2.69]
.100
[2.54]
Related Product Data
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
There is no polarization slot on
this end of 10- and 14-position
receptacles.
•
Housing Assembly and Cover
Dimensions
No. of
Pos.
Contact
Plating
Strain Relief
Part No.
Receptacle
(Preassembled)
A
B
C
D
Accessories
Pull Tabs — page 63
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
Duplex1
Duplex2
499252-5
499252-5
499252-9
499252-9
499252-8
499252-8
499252-2
499252-2
1-499252-0
1-499252-0
499252-3
499252-3
1-499252-2
1-499252-2
499252-6
499252-6
499252-1
499252-1
499252-4
499252-4
499252-7
499252-7
1-499252-3
1-499252-3
1658621-1
1658622-1
1658621-2
1658622-2
1658621-3
1658622-3
1658621-4
1658622-4
1658621-5
1658622-5
1658621-6
1658622-6
1658621-7
1658622-7
1658621-8
1658622-8
1658621-9
1658622-9
1-1658621-0
1-1658622-0
1-1658621-1
1-1658622-1
1-1658621-2
1-1658622-2
.450
11.43
.680
17.27
.400
10.16
.275
6.99
10
14
16
20
24
26
30
34
40
50
60
64
.650
16.51
.880
22.35
.600
15.24
.375
9.53
.750
19.05
.980
24.89
.700
17.78
.425
10.80
.950
24.13
1.180
29.97
.900
22.86
.525
13.34
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers
listed below for the applicable docu-
ments.
1.150
29.21
1.380
35.05
1.100
27.94
.625
15.88
1.250
31.75
1.480
37.59
1.200
30.48
.675
17.15
1.450
36.83
1.680
42.67
1.400
35.56
.775
19.69
1.650
41.91
1.880
47.75
1.600
40.64
.875
22.23
1.950
49.53
2.180
55.37
1.900
48.26
1.025
26.04
2.450
62.23
2.680
68.07
2.400
60.96
1.275
32.39
2.950
74.93
3.180
80.77
2.900
73.66
1.525
38.74
3.150
80.01
3.380
85.85
3.100
78.74
1.625
41.28
1.000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
2.000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end,
.000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel.
Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep-
arately using the component part nos. listed above.
*These receptacles can be used
in applications requiring center
polarization.
All part numbers are RoHS compliant.
50
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Novo Receptacles, Dual Polarized, .100 x .100 [2.54 x 2.54] Centers
.140
[3.56]
Housing Assembly with
Recessed Cover
C
.460
[11.68]
.100
[2.54]
.135
[3.43]
(Preassembled) and Strain
Relief (Optional)
.240
[6.10]
.100
[2.54]
.140
.190
Cover
Housing
Assembly
[3.56]
[4.83]
Material and Finish
Housing, Cover & Strain Relief —
UL 94V-0 rated thermoplastic, black
Position No. 1
Index Slot
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold or gold
flash over palladium-nickel .000030
[0.00076] min. total on post/pin mating
end, .000100-.000200 [0.00254-
0.00508] tin on termination end, with
entire contact underplated .000050
[0.00127] nickel.
.329
[8.36]
.422
[10.72] [11.79]
Ref.
.464
.570
[14.48]
Ref.
.650
[16.51]
Ref.
Ref.
.629
[15.98]
Ref.
.093
[2.36]
Terminated
with Cover
Related Product Data
B
A
Terminated
with Cover
and Strain Relief
Mateable Pin Headers —
Universal — pages 84-95
Low Profile — pages 76-83
Mateable Universal I/O Pin
Connectors — pages 45 and 46
.106
[2.69]
.100
[2.54]
Accessories
Pull Tabs — page 63
Housing Assembly and Cover
Keying Plug — page 64
Pull Loops — page 66
Strain Relief — page 68
Application Tooling — pages 70-74
Dimensions
B
No. of
Pos.
Strain Relief
Part No.
Receptacle
(Preassembled)
A
.450
11.43
C
.400
10.16
Technical Documents
Product Specifications
108-40000 Novo and Novo Stackable
Receptacles; 108-40004 Ribbon Cable,
PVC Insulated
Application Specification
114-40005 Novo Receptacles
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
.680
17.27
10
14
16
20
24
26
30
34
40
50
64
499252-5
499252-9
499252-8
499252-2
1-499252-0
499252-3
1-499252-2
499252-6
499252-1
499252-4
1-499252-3
1658624-1
.650
16.51
.880
22.35
.600
15.24
1658624-2
1658624-3
1658624-4
1658624-5
1658624-6
1658624-7
1658624-8
1658624-9
1-1658624-0
1-1658624-2
.750
19.05
.980
24.89
.700
17.78
.950
24.13
1.180
29.97
.900
22.86
1.150
29.21
1.380
35.05
1.100
27.94
1.250
31.75
1.480
37.59
1.200
30.48
1.450
36.83
1.680
42.67
1.400
35.56
1.650
41.91
1.880
47.75
1.600
40.64
1.950
49.53
2.180
55.37
1.900
48.26
2.450
62.23
2.680
68.07
2.400
60.96
3.150
80.01
3.380
85.85
3.100
78.74
Note: All part numbers are RoHS compliant.
51
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Specifications subject
to change.
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are
millimeters over inches
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series
Technical Data
Color — 622 Series, Blue;
636 Series, Black
Contact Material —
622 Series, Beryllium copper;
636 Series, Phosphor bronze
Contact Plating — 622 Series,
.000030 [0.00076] min. gold on mating
end, .000100-.000200 [0.00254-
0.00508] tin on termination end, both
over .000050 [0.00127] nickel under-
plate; 636 Series, .000015 [0.00038]
min. gold on mating end, .000100-
.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Polarization — Military and center
polarized only
I Recognized under the
Component Program
of the Underwriters
R
Laboratories, Inc.
UL File No. E60980
I Certified by the
Canadian Standards
R
Association,
File No. LR 92984
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Accessories
Strain Relief — page 69
Pull Loops — page 66
Keying Plug — page 64
52
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
622 and 636 Series (Continued)
622 Series
Part Numbers
Connector
Only
Connector
w/ Strain Relief
No.of
Pos.
Dimensions
B
A
C
T&B
T&B
TE Connectivity
1658527-2
1658527-3
2-1658527-0
1658527-5
1658527-6
2-1658527-3
—
TE Connectivity
1-1658527-9
1658527-4
(Reference Only)
(Reference Only)
.477
12.12
.200
5.08
.075
1.91
6
622-0630LF
622-0641LF
.677
17.20
.400
10.16
.126
3.20
10
12
14
16
20
24
26
30
34
40
50
64
622-1030LF
622-1230LF
622-1430LF
622-1630LF
622-2030LF
—
622-1041LF
—
.777
19.74
.500
12.70
.150
3.81
—
.877
22.28
.600
15.24
.150
3.81
2-1658527-2
1658527-7
622-1441LF
622-1641LF
622-2041LF
622-2441LF
622-2641LF
622-3041LF
622-3441LF
622-4041LF
622-5041LF
622-6441LF
.977
24.82
.700
17.78
.150
3.81
1.177
29.90
.900
22.86
.150
3.81
1658527-8
1.377
34.98
1.100
27.94
.150
3.81
2-1658527-5
1-1658527-0
2-1658527-7
2-1658527-8
1-1658527-3
1-1658527-5
3-1658527-2
1.477
37.52
1.200
30.48
.150
3.81
1658527-9
—
622-2630LF
—
1.677
42.60
1.400
35.56
.150
3.81
1.877
47.68
1.600
40.64
.150
3.81
—
—
2.177
55.30
1.900
48.26
.150
3.81
1-1658527-2
1-1658527-4
—
622-4030LF
622-5030LF
—
2.677
68.00
2.400
60.96
.150
3.81
3.377
85.78
3.100
78.74
.150
3.81
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
636 Series
Part Numbers
Connector
Only
Connector
No.of
Pos.
Dimensions
B
w/ Strain Relief
A
C
T&B
T&B
TE Connectivity
1-1658528-0
1-1658528-1
1-1658528-2
1-1658528-4
1-1658528-5
1-1658528-6
1-1658528-7
—
TE Connectivity
—
(Reference Only)
(Reference Only)
.477
12.12
.200
5.08
.075
1.91
6
636-0630LF
—
.677
17.20
.400
10.16
.126
3.20
10
14
16
20
24
26
34
40
50
64
636-1030LF
636-1430LF
636-1630LF
636-2030LF
636-2430LF
636-2630LF
—
1658528-2
—
636-1041LF
—
.877
22.28
.600
15.24
.150
3.81
.977
24.82
.700
17.78
.150
3.81
1658528-5
1658528-4
—
636-1641LF
636-2041LF
—
1.177
29.90
.900
22.86
.150
3.81
1.377
34.98
1.100
27.94
.150
3.81
1.477
37.52
1.200
30.48
.150
3.81
—
—
1.877
47.68
1.600
40.64
.150
3.81
1658528-6
1-1658528-9
1658528-8
2-1658528-3
636-3441LF
636-4041LF
636-5041LF
636-6441LF
2.177
55.30
1.900
48.26
.150
3.81
—
—
2.677
68.00
2.400
60.96
.150
3.81
2-1658528-0
—
636-5030LF
—
3.377
85.78
3.100
78.74
.150
3.81
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
Note: All part numbers are RoHS
“LF” suffix.
compliant.
53
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
METRIC
Dimensions are millime-
ters over inches
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series
Technical Data
Color — Blue
Contact Material — Beryllium copper
Dual Slot IDC Design
Contact Plating — .000030 [0.00076]
min. gold on mating end, .000100-
.000200 [0.00254-0.00508] tin on
termination end, both over .000050
[0.00127] nickel underplate.
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
Universal and Low Profile Pin
Headers — pages 76-95
Universal I/O Ribbon Cable
Connectors — pages 45 and 46
Optional Center
Polarization
Polarization — Military only or
military and center polarized
I Recognized under the
Component Program
of the Underwriters
3.30
[.130]
R
Laboratories, Inc.
UL File No. E60980
I Certified by the
Canadian Standards
R
Association,
File No. LR 92984
Application Tooling
Die — 1437000-9 [T&B# 779-2151 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Standard Socket Connector
Without Strain Relief
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-4 [T&B# 779-3151 ref.]
Accessories
Strain Relief — page 67
Pull Loops — page 66
Keying Plug — page 64
Note: All part numbers are RoHS compliant.
54
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers,
609 Series (Continued)
609 Series, Military Polarized
Part Numbers
Connector
Only
Connector
w/ Strain Relief
No.of
Pos.
Dimensions
B
A
C
T&B
T&B
(Reference Only)
TE Connectivity
2-1658526-5
1658526-3
—
TE Connectivity
(Reference Only)
.476
12.09
.200
5.08
.392
9.96
6
609-0600MLF
—
—
.676
17.17
.400
10.16 15.04
.592
10
16
20
26
40
50
609-1000MLF
—
—
—
.976
24.79
.700
17.78 22.66
.892
1-1658526-0
609-1601MLF
1.176
29.87
.900
1.092
3-1658526-0
3-1658526-5
4-1658526-1
4-1658526-3
609-2000MLF
609-2600MLF
609-4000MLF
609-5000MLF
—
—
22.86 27.74
1.476
37.49
1.200 1.392
30.48 35.36
—
—
—
—
2.176
55.27
1.900 2.092
48.26 53.14
2.676
67.97
2.400 2.592
60.96 65.84
2-1658526-2
609-5001MLF
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
609 Series, Military and Center Polarized
Part Numbers
Connector
Only
Connector
No.of
Pos.
Dimensions
B
w/ Strain Relief
A
C
T&B
T&B
TE Connectivity
1658526-1
TE Connectivity
1658526-2
1658526-5
1658526-9
1-1658526-1
1-1658526-3
—
(Reference Only)
(Reference Only)
.476
12.09
.200
5.08
.392
9.96
6
609-0630LF
609-0641LF
.676
17.17
.400
10.16 15.04
.592
10
14
16
20
24
26
34
36
40
50
64
1658526-4
609-1030LF
609-1430LF
609-1630LF
609-2030LF
609-2430LF
609-2630LF
609-3430LF
609-3630LF
609-4030LF
609-5030LF
609-6430LF
609-1041LF
609-1441LF
609-1641LF
609-2041LF
—
.876
22.25
.600
15.24 20.12
.792
1658526-8
.976
24.79
.700 .892
17.78 22.66
2-1658526-9
1-1658526-2
1-1658526-4
1-1658526-5
1-1658526-8
3-1658526-8
2-1658526-0
2-1658526-3
4-1658526-4
1.176
29.87
.900
1.092
22.86 27.74
1.376
34.95
1.100 1.292
27.94 32.82
1.476
37.49
1.200 1.392
30.48 35.36
1-1658526-6
1-1658526-9
4-1658526-0
2-1658526-1
2-1658526-4
4-1658526-5
609-2641LF
609-3441LF
609-3641LF
609-4041LF
609-5041LF
609-6441LF
1.876
47.65
1.600 1.792
40.64 45.52
1.976
50.19
1.700 1.892
43.18 48.06
2.176
55.27
1.900 2.092
48.26 53.14
2.676
67.97
2.400 2.592
60.96 65.84
3.376
85.75
3.100 3.292
78.74 83.62
Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the
“LF” suffix.
Note: All part numbers are RoHS compliant.
55
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
.280
[7.1]
A
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
.100
[2.54]
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
.319 Before
[8.1] Crimping
.008 x .024
[0.2 x 0.6]
Application Tooling
Die —
.100
[2.54]
.100
[2.54]
B
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref.]
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
Part Numbers
Dimensions
No.of
Pos.
T&B
A
B
TE Connectivity
1437006-4
(Reference Only)
.512
13.00
.200
5.08
6
609-0653
.713
.400
10
14
16
20
26
34
1437006-7
609-1053
609-1453
609-1653
609-2053
609-2653
609-3453
18.11
10.16
.913
23.19
.600
15.24
1-1437006-0
1-1437006-3
1-1437006-6
2-1437006-1
2-1437006-4
1.010
25.65
.700
17.78
1.213
30.81
.900
22.86
1.512
38.40
1.200
30.48
1.913
48.59
1.600
40.64
Note: Order by TE Part Number only. All part numbers listed above are found
on TE customer drawing 1437006-4.
Note: All part numbers are RoHS compliant.
56
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series
7.57
(.298)
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Single slot, flat,
tuning fork style IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 26-28 AWG solid or stranded,
PVC insulated ribbon cable
Mateable Connectors —
.100 x .100 DIP sockets
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref.]
Handtool —
1437000-6 [T&B# 779-2100 ref.]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref.]
Bench Press Platen —
Part Numbers
6-1437000-1 [T&B# 779-3133 ref.]
Dimensions
No.of
Pos.
T&B
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref.]
A
B
TE Connectivity
1658525-4
(Reference Only)
.506
12.85
.200
5.08
6
622-0653LF
622-0853LF
622-1053LF
622-1453LF
622-1653LF
622-2053LF
622-2453LF
622-2653LF
622-3453LF
622-3653LF
622-4053LF
622-5053LF
622-6053LF
622-6453LF
.606
15.39
.300
7.62
8
1658525-5
Accessories
Strain Relief — page 65
.706
17.93
.400
10.16
10
14
16
20
24
26
34
36
40
50
60
64
1658525-6
.906
23.01
.600
15.24
1658525-7
1.006
25.55
.700
17.78
1658525-8
1.206
30.63
.900
22.86
1658525-9
1.406
35.71
1.100
27.94
1-1658525-0
1658525-1
1.506
38.25
1.200
30.48
1.906
48.41
1.600
40.64
1658525-2
2.006
50.95
1.700
43.18
1-1658525-2
1-1658525-3
1658525-3
2.206
56.03
1.900
48.26
2.706
68.73
2.400
60.96
3.206
81.43
2.900
73.66
1-1658525-5
1-1658525-6
3.406
86.51
3.100
78.74
Notes: Order by TE Part Number only.
All part numbers are RoHS compliant.
57
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .100 [2.54 x 2.54] Centers
B
Housing Assembly with
Cover (Preassembled)
C
.050
[1.27]
.278
[7.06]
.100
[2.54]
A
.050
[1.27]
A
.050
[1.27]
Material and Finish
Housing and Cover — Black
thermoplastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000005 [0.000127] min. gold in termi-
nation area, .000100 [0.00254] min. tin
on solder tails, both over .000050
[0.00127] nickel on entire contact
.396*
[10.06]
Contact Design — Flat, tuning fork
style IDC
.113
[2.87]
.156
[3.96]
.100
[2.54]
.019
[0.48]
Related Product Data
Application Tooling — pages 70-74
.013
[0.33]
C
*Height of connector after
termination is .253 [6.43] ref.
.100
[2.54]
Technical Documents
Product Specification
108-1538 DIP Plug
Instruction Sheets
Instructional material covering operation,
setup, maintenance, repair, etc. is included
with each machine, tool or die set. If this
material is required prior to receiving
your tooling, call TE at the numbers listed
below for the applicable documents.
Dimensions
No. of
Pos.
DIP Plugs
(Preassembled)
With Retention
Legs
Mateable Connectors —
A
B
C
For Connectors without Retention
Legs — .100 x .100 DIP Sockets
.450
11.43
.680
17.27
.400
10.16
10
2-746610-1
1-111382-4
.650
.880
.600
14
16
20
24
26
30
34
40
44
50
60
64
2-746610-2
1-746610-4
1-746610-5
2-746610-3
1-746610-6
1-746610-7
1-746610-8
1-746610-9
2-746610-6
2-746610-0
2-746610-4
2-746610-5
—
16.51
22.35
15.24
.750
19.05
.980
24.89
.700
17.78
1-111382-6
.950
24.13
1.180
29.97
.900
22.86
1-111382-7
1.150
29.21
1.380
35.05
1.100
27.94
—
1.250
31.75
1.480
37.59
1.200
30.48
1-111382-8
1.450
36.83
1.680
42.67
1.400
35.56
—
C
1.650
41.91
1.880
47.75
1.600
40.64
.100
[2.54]
1-111382-9
1.950
49.53
2.180
55.37
1.900
48.26
—
2.150
54.61
2.380
60.45
2.100
53.34
—
.100
[2.54]
.035
[0.89]
Dia.
2.450
62.23
2.680
68.07
2.400
60.96
2-111382-0
(After Plating)
2.950
74.93
3.180
80.77
2.900
73.66
—
—
3.150
80.01
3.380
85.85
3.100
78.74
PCB Layout
Notes: All plug kits include a housing assembly and cover (preassembled).
All part numbers are RoHS compliant.
58
Catalog 82012
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .300 [2.54 x 7.62] Centers
Housing Assembly with
Cover (Preassembled)
Material and Finish
Housing and Cover — Black thermo-
plastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
Dimensions
B
No. of
Pos.
Contact
Plating
DIP Plugs
(Preassembled)
A
C
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
Duplex1
Duplex2
Duplex3
746611-7
—
.350
8.89
.488
12.40
.300
7.62
8
5746613-1
746611-8
5746612-2
5746613-2
746611-6
5746612-3
5746613-3
746611-9
—
.650
16.51
.788
20.02
.600
15.24
14
16
18
20
.300
[7.62]
.750
19.05
.888
22.56
.700
17.78
.850
21.59
.988
25.10
.800
20.32
—
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
1-746611-0
—
.950
24.13
1.088
27.64
.900
22.86
—
1 .000030 [0.00076] gold on leg
2 .000015 [0.00038] gold on leg
3 .000100 [0.00254] tin on leg
Note: All part numbers are RoHS compliant.
59
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
DIP Plugs, .100 x .600 [2.54 x 15.24] Centers
Housing Assembly with
Cover (Preassembled)
Material and Finish
Housing and Cover — Black thermo-
plastic, UL 94V-0 rated
Contacts — Phosphor bronze, plated
.000050 [0.00127] nickel underplate on
entire contact, .000005 [0.000127] min.
gold on termination (IDC) end. See table
for leg finish.
Contact Design — Flat, tuning fork
style IDC
Related Product Data
Application Tooling — pages 70-74
Technical Documents
Product Specification
108-1538 DIP Plug
Ribbon Cable Requirements —
28 AWG stranded or 26, 28 and 30 AWG
solid wire
Dimensions
B
No. of
Pos.
Contact
Plating
DIP Plugs
(Preassembled)
A
C
1.150
1.288
1.100
24
28
40
Duplex1
Duplex1
Duplex1
5746615-1
5746615-2
5746615-3
29.21
32.72
27.94
1.350
34.29
1.488
37.80
1.300
33.02
1.950
49.53
2.088
53.04
1.900
48.26
1 .000015 [0.00038] gold on leg
Recommended Mounting
Hole Pattern
(for .094-.125 [2.39-3.18]
thick pc boards)
Note: All part numbers are RoHS compliant.
60
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
4-Row PCB Solder Transition Connectors
Technical Data
Color — Blue
Contact Material — Beryllium copper
Contact Plating — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel underplate.
Contact Design — Dual slot, barrel
shaped (“tulip”) IDC with solder tail
Housing Material — Glass-filled
thermoplastic, UL 94V-0 rated
Cable — 28-30 AWG solid or stranded,
PVC insulated ribbon cable
Application Tooling
Die —
1-1437000-3 [T&B# 779-2153 ref]
Handtool —
1437000-6 [T&B# 779-2100 ref]
Bench Press (Manual) —
1437001-4 [T&B# 779-3200 ref]
Bench Press Platen —
5-1437000-6 [T&B# 779-3130 ref]
609 Series, Military Polarized
Part Numbers
Bench Press Base Plate —
6-1437000-7 [T&B# 779-3153 ref]
No.of
Pos.
Dimensions
.100 Tail Length
.156 Tail Length
A
B
TE Connectivity
T&B
TE Connectivity
T&B
(Reference Only)
(Reference Only)
.710
.450
10
14
16
20
26
34
44
50
6437006-5
6437006-8
1-6437006-1
—
609-1003LF
—
—
18.03
11.43
.910
23.11
.650
16.51
609-1403LF
609-1603LF
—
6437006-9
—
609-1443LF
—
1.010
25.65
.750
19.05
1.210
30.73
.950
24.13
1-6437006-5
2-6437006-0
2-6437006-3
—
609-2043LF
609-2643LF
609-3443LF
—
1.510
38.35
1.250
31.75
1-6437006-8
2-6437006-2
2-6437006-9
—
609-2603LF
609-3403LF
609-4403LF
—
1.910
48.51
1.650
41.91
2.410
61.21
2.150
54.61
2.710
68.83
2.450
62.23
3-6437006-2
609-5043LF
Notes: Order by TE Part Number only.
All part numbers listed above are found on TE Customer Drawing 6437006-5.
Note: All part numbers are RoHS compliant.
61
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
1-Row Horizontal Receptacles
A
B
1.35
[.053]
1.25
Pitch
[.049]
1.40
[.055]
2.80
[.110]
3.00
[.118]
Optional
Mounting Boss
3.40
[.134]
4.20
[.165]
Material and Finish
Housing — Black PPS, UL 94V-0 rated
Contacts — Phosphor bronze,
post tin plated over nickel underplate
0.05
[.002]
0.50
[.020]
0.80
[.031]
C
0.70
[.028]
1.30
[.051]
Min.
3.40
[.134]
0.70
[.028]
Min.
Ø 0.80
[.031]
1.35
[.053]
0.50
[.020]
A
PCB Mounting Layout
1.25 Fine Pitch (FP) - 1-Row Horizontal Receptacles
Part Numbers
With Mounting Bosses
Dimensions
B
No. of
Pos.
Without Mounting Bosses
A
C
Tape
Bag
Tape
Bag
6.45
3.75
5.45
4
5
3-175637-4
3-174638-4
3-175629-4
3-174903-4
.254
.148
.215
7.70
.303
5.00
.197
6.70
.264
3-175637-5
3-175637-6
3-175637-7
3-175637-8
4-175637-0
—
3-174638-5
3-174638-6
3-174638-7
3-174638-8
4-174638-0
4-174638-7
5-174638-0
3-175629-5
3-175629-6
3-175629-7
3-175629-8
4-175629-0
4-175629-7
—
3-174903-5
3-174903-6
3-174903-7
3-174903-8
4-174903-0
4-174903-7
5-174903-0
8.95
.352
6.25
.246
7.95
.313
6
10.20
.402
7.50
.295
9.20
.362
7
2.35
Slot Key
11.45
.451
8.75
.345
10.45
.411
8
13.95
.549
11.25
.443
12.95
.510
10
17
20
22.70
.894
20.00
.787
21.70
.854
26.45
1.041
23.75
.935
25.45
1.002
—
Note: All part numbers are RoHS compliant.
62
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories
Approximate Installed Height of
Part Number 120623-1 Above Connector
Flexible Pull Tabs
Dimensions
No. of
Material and Finish
Nylon, black
Positions
C
H
.680
17.27
1.806
45.87
10
14
16
20
24
26
30
34
36
40
44
50
60
64
.880
22.35
1.749
44.42
Part Number 120623-1
.980
24.89
1.721
43.71
Related Product Data
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
1.180
29.97
1.664
42.27
1.380
35.05
1.607
40.82
1.480
37.59
1.578
40.08
1.680
42.67
1.521
38.63
1.880
47.75
1.464
37.19
1.980
50.29
1.436
36.47
2.180
55.37
1.379
35.03
H
2.380
60.45
1.322
33.58
2.680
68.07
1.236
31.39
3.180
80.77
1.094
27.79
3.380
85.85
1.037
26.34
C
Note: Cannot be used together with a strain relief.
Universal I/O Latches
Material and Finish
Polyester, black
.002
.236
[5.99]
.108
[2.74
0.05
Dimensions
Mates to
Receptacles
Part
Number
]
F
G
.416
.768
Related Product Data
Universal I/O Pin Connectors —
pages 45 and 46
Without Strain Relief
With Strain Relief
111451-1
111451-3
10.57
19.51
F
.576
14.63
.928
23.57
Latch Removal Tool
Part Number 91269-1
G
.335
[8.51]
Military Polarizers
.134
[3.40]
Material and Finish
Thermoplastic, black
Break Line
Related Product Data
Universal I/O Pin Connectors —
pages 45 and 46
Throw-Away
Tab
Part Numbers:
Break Line
499991-2 (packaged, 50 per bag)
499991-3 (packaged, 1000 per box)
The snap-in polarizer
provides military polarization.
.335
[8.51]
.134
[3.40]
Note: All part numbers are RoHS compliant.
63
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Keying Plugs
Material and Finish
Thermoplastic, see table for color
Keying Plug
Plug (Installed
in Contact)
Typical Application
Key Plug 111620-1
There are ten key plugs on a comb
.500
[12.70]
.245
[6.22]
.029
[0.58]
.185
[4.70]
Polarizing Key
1-1437023-2
Receptacle
Connector Series
Catalog
Pages
Keying Plug
Part Number
Style
Color
2 mm
16, 17
111620-1
Comb
Single
Black
Blue
Rcpt. Connectors
1-1437023-2
T&B 609-0000 (Ref.)
1-1437023-2
609 Series Female
Socket Connectors
54, 55
622 Series Female
Socket Connectors
52, 53
52, 53
Single
Single
Blue
Blue
T&B 609-0000 (Ref.)
1-1437023-2
636 Series Female
Socket Connectors
T&B 609-0000 (Ref.)
Order by TE Part Number only.
Note: All part numbers are RoHS compliant.
64
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Keying Plugs (Continued)
Material and Finish
Thermoplastic, see table for color
Receptacle
Connector Series
Catalog
Pages
Keying Plug
Part Number
Style
Color
499712-1
104072-1
499712-1
104072-1
Single
Comb
Single
Comb
Novo
Part Number 499712-1
48-51
13-15
Black
Connectors
Ultra ATA Bus
Connectors
Black
Order by TE Part Number only.
Key Plug
(Plugs into Contact)
Alternate Configuration
Keying Plug Part No. 104072-1
(10 Keying Plugs per Comb)
Note: All part numbers are RoHS compliant.
65
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Pull Loops, Permanent
(for Receptacles and
Pin Connectors)
Material and Finish
Natural color PVC, 94-VTM-1 rating
(thin material)
Related Product Data
Use with:
Female Socket Connectors — pages
52-55
Ultra ATA Bus Connectors —
pages 13-15
2 mm Receptacle Connectors —
pages 16 and 17
Novo Connectors — pages 48-51
Note: This pull loop is installed manually between the cover and strain relief,
and cannot be used without strain relief.
No. of Positions
Dimension
A
Pull Loop
Part No.
Female Socket
Conns.
Ultra ATA
2 mm
Rcpt. Conns.
Novo
Conns.
Bus Conns.
.44
10
14
16
20
24
26
30
34
40
50
60
—
—
—
—
—
—
—
—
40
—
—
12, 14, 16
10
14
16
20
24
26
30
34
40
50
60
5088450-2
5088450-3
5088450-4
5088450-5
5088450-6
5088450-7
1-5088450-2
5088450-8
5088450-9
1-5088450-0
1-5088450-1
11.18
.64
16.26
20
.74
18.80
22
.88
22.35
24, 26
1.08
27.43
—
1.18
29.97
30, 34, 40
1.38
35.05
—
44
50
—
—
1.58
40.13
1.82
46.23
2.32
58.93
2.80
71.12
Note: All part numbers are RoHS compliant.
66
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
.004
.313
[7.95
C
A
Strain Relief for Universal
I/O Pin Connectors Without
Mounting Ears
Dimensions
B
No. of
Pos.
Part
0.10
]
Number
A
.520
13.21
C
.940
23.88
Typ.
.766
19.46
10
14
16
20
24
26
30
34
40
44
50
60
64
111547-1
111547-2
111547-3
111547-4
111547-5
111547-6
111547-7
111547-8
111547-9
1-111547-0
1-111547-1
1-111547-2
1-111547-3
.720
18.29
.966
24.54
1.140
28.96
.002
.098
[2.49
.330
[8.38]
Typ.
Material and Finish
Glass-filled polyester, black
0.05
]
.820
20.83
1.066
27.08
1.240
31.50
2 Plc.
1.020
25.91
1.266
32.16
1.440
36.58
Related Product Data
Universal I/O Pin Connectors —
page 45
B
1.220
30.99
1.466
37.24
1.640
41.66
1.320
33.53
1.566
39.78
1.740
44.20
1.520
38.61
1.766
44.86
1.940
49.28
1.720
43.69
1.966
49.94
2.140
54.36
2.020
51.31
2.266
57.56
2.440
61.98
2.220
56.39
2.466
62.64
2.640
67.06
2.520
64.01
2.766
70.26
2.940
74.68
3.020
76.71
3.266
82.96
3.440
87.38
3.220
81.79
3.466
88.04
3.640
92.56
Strain Relief for 609 Series
(Tulip Contact) Female
Socket Connectors
Material and Finish
Glass-filled polyester, blue
Part Number
No. of
Pos.
Dimension
Type
T&B
A
TE Connectivity
(Ref. Only)
Related Product Data
Female Socket Connectors —
.472
11.99
6
Standard
2-1437020-1
609-0631
page 54 and 55
Heavy Duty
Standard
3-1437020-7
3-1437020-5
5-1437020-1
4-1437020-9
6-1437020-6
6-1437020-4
8-1437020-6
8-1437020-4
609-1031HD
609-1031
.240
.672
17.07
10
A
[6.10]
Heavy Duty
Standard
609-1431HD
609-1431
.872
22.15
14
16
Heavy Duty
Standard
609-1631HD
609-1631
.972
24.69
Heavy Duty
Standard
609-2031HD
609-2031
1.172
29.77
20
24
26
.565
[14.35]
1.372
34.85
Standard
9-1437020-4
609-2431
Heavy Duty
Standard
1-1437021-2
1-1437021-0
3-1437021-2
3-1437021-0
5-1437021-5
5-1437021-3
8-1437021-1
7-1437021-9
609-2631HD
609-2631
1.472
37.39
Standard Version
Heavy Duty
Standard
609-3431HD
609-3431
1.872
47.55
34
40
.240
[6.10]
A
Heavy Duty
Standard
609-4031HD
609-4031
2.172
55.17
Heavy Duty
Standard
609-5031HD
609-5031
2.672
67.87
50
64
3.372
85.65
Heavy Duty
1-1437022-3
609-6431HD
Note: Heavy duty part numbers are listed on TE customer drawing
3-1437020-7. Standard part numbers are listed on TE customer
drawing 2-1437020-1.
.570
[14.46]
All part numbers are RoHS compliant.
Heavy Duty Version
67
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
A
Strain Relief for Novo and
Ultra ATA Bus Connectors
Dimensions
No. of
Pos.
Part
Number
A
B
.534
13.56
.690
17.53
10
14
16
20
24
26
30
34
40
44
50
60
64
499252-5
499252-9
499252-8
499252-2
1-499252-0
499252-3
1-499252-2
499252-6
499252-1*
1-499252-1
499252-4
499252-7
1-499252-3
Material and Finish
Glass-filled polyester, black
.734
18.64
.890
22.61
.240
[6.10]
.834
21.18
.990
25.15
B
Related Product Data
Novo Connectors — pages 48-51
Ultra ATA Bus Connectors —
pages 13-15
1.034
26.26
1.190
30.23
.186
[4.72]
.106
[2.69]
Ref.
1.234
31.34
1.390
35.31
.581
[14.76]
Ref.
1.334
33.88
1.490
37.85
1.534
38.96
1.690
42.93
1.734
44.04
1.890
48.01
2.034
51.66
2.190
55.63
2.234
56.74
2.390
60.71
2.534
64.36
2.690
68.33
3.034
77.06
3.190
81.03
3.234
82.14
3.390
86.11
*Ultra ATA Strain Relief is 499252-1 only.
Strain Relief for 2 mm
Receptacle Connectors
Dimensions
No. of
Pos.
Part
Number
A
B
.440
11.18
.314
7.98
8
1-111614-6
111614-1
1-111614-7
111614-2
111614-3
111614-4
1-111614-5
111614-5
111614-6
111614-7
111614-8
111614-9
1-111614-0
1-111614-1
.015
[0.38]
.130
[3.30]
Material and Finish
Glass-filled polyester, black
Rad. Typ.
.518
13.16
.392
9.96
10
12
14
16
20
22
24
26
30
34
40
44
50
B
Typ.
.596
15.14
.470
11.94
.132
[3.35]
Typ.
Related Product Data
2 mm Receptacle Connectors —
pages 16 and 17
.201
[5.11]
.676
17.17
.550
13.97
Typ.
A
.755
19.18
.629
15.98
.276
[7.01]
Typ.
.912
23.16
.786
19.96
.161
[4.09]
Typ.
Typ.
.991
25.17
.865
21.97
.030
[0.76]
Typ.
Typ.
.056
.139
[3.53]
Typ.
.020
[0.51]
1.070
27.18
.944
23.98
[1.42]
.082
[2.08]
Typ.
1.148
29.16
1.022
25.96
.040
[1.02]
Typ.
1.306
33.17
1.180
29.97
1.463
37.16
1.337
33.96
1.700
43.18
1.574
39.98
1.857
47.17
1.731
43.97
2.093
53.16
1.967
49.96
Note: All part numbers are RoHS compliant.
68
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Accessories (Continued)
Strain Relief for 622 and
636 Series Female Socket
Connectors
A
Material and Finish
Glass-filled PBT, see table for color
.236
[6.00]
Related Product Data
Female Socket Connectors —
pages 52 and 53
.555
[14.10]
Part Number
No. of
Pos.
Dimension
C
Color
T&B
TE Connectivity
(Ref. Only)
622-0631
636-0631
622-1031
636-1031
622-1431
636-1431
622-1631
636-1631
622-2031
636-2031
622-2431
636-2431
622-2631
636-2631
622-3031
636-3031
622-3431
636-3431
622-4031
636-4031
622-5031
636-5031
Blue
Black
Blue
2-1437023-9
1-1437026-9
4-1437023-7
3-1437026-9
7-1437023-1
6-1437026-6
8-1437023-9
8-1437026-5
1437024-5
.477
6
12.12
.677
17.20
10
14
16
20
24
26
30
34
40
Black
Blue
.877
22.28
Black
Blue
.977
24.82
Black
Blue
1.177
29.90
Black
Blue
1437027-7
1-1437024-6
5-1437011-3
2-1437024-8
3-1437027-4
4-1437024-0
6-1437011-6
5-1437024-3
8-1437027-0
8-1437024-3
3-1437028-4
1-1437025-2
6-1437028-8
1.377
34.98
Black
Blue
1.477
37.52
Black
Blue
1.677
42.60
Black
Blue
1.877
47.68
Black
Blue
2.177
55.30
Black
Blue
2.677
68.00
50
60
64
Black
3.177
80.70
Black
9-1437028-5
636-6031
Blue
4-1437025-0
1437029-2
622-6431
636-6431
3.377
85.78
Black
Note: These part numbers are listed on TE customer drawing 1-1437026-9.
Note: All part numbers are RoHS compliant.
69
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Ribbon Cable Assembly Machines (R-CAM)
Product Facts
I Terminates 28 AWG
[0.08 mm2] .050 [1.27]
centerline and 30 AWG
[0.05 mm2] .025 [0.64]
centerline cable to a variety
of connectors
I Automatic in-process
electrical testing — tests all
circuits for opens, shorts
and high-voltage breakdown
(up to 1,000 volts for
receptacles, 800 volts for
card edge connectors and
300 volts for .025 [0.64]
centerline connectors);
rejects cable assemblies
failing any of these tests
I Operated by a user-friendly,
interactive touchscreen —
or a keyboard on the
R-CAM 4
I Self-diagnostics shut
down the machine when a
malfunction occurs, pinpoint
the malfunction, and
identify it on the screen
I Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
The R-CAM 4, pictured
above, is the newest fully
automatic Ribbon Cable
Assembly Machine for
machine and connector
style. The purpose of this
test is to detect gaps that
may have been created dur-
ing assembly that could
eventually short out when
in use. If an assembly fails
any of these tests, the
50 or 60 Hz. Model 4 oper-
ates at 120 or 220 VAC, 50-
60 Hz, single phase, 15A.
The R-CAM 2A and 3A
require a minimum air sup-
ply of 80 psi [5.52 bar] at
producing and testing
daisy-chained ribbon cable
assemblies. Enhancements
of this model include the
capability to process pre-
manufactured slit-and-twist
cable and the ability to
3
8 scfm [0.0038m /s]. The
R-CAM 4 requires 80 psi
[5.52 bar] at 12 scfm
machine will shear the
cable off at that point and
automatically discard it into
3
[0.0057 m /s].
produce assemblies with up an alternate bin.
to 10 connectors.
Need more information?
For more information,
specifically about tooling,
call TE at the numbers listed
below.
These machines are pro-
The R-CAM 2A, 3A, and
4 terminate 28 AWG
grammed and operated
with an interactive touch-
screen that allows operators
to access manual, set-up,
2
[0.08 mm ], .050 [1.27]
centerline cable to a variety
of connectors. The R-CAM 4 run, and edit modes
will also terminate 30 AWG
through easy-to-follow
menu-driven prompts.
2
[0.05 mm ] .025 [0.64] cen-
terline cable.
Self-diagnostics shut
All of the R-CAM models
automatically perform an
in-process electrical test of
all circuits for opens and
shorts. In addition, all mod-
els automatically test the
assembly for high-voltage
breakdown up to 1,000
volts, depending on the
down the machine if a
malfunction — such as
misloaded connectors or
incorrectly fed cable —
is detected, pinpoint the
malfunction, and identify it
on the touchscreen.
Models 2A and 3A are avail-
able in 120 or 220 VAC, 8 A,
70
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Comparison of R-CAM 2A, R-CAM 3A and R-CAM 4
Machine Model
Part Number*
R-CAM 2A
R-CAM 3A
R-CAM 4
760700-K
761900-K
318800-K
2
2
2
28 AWG [0.08 mm ],
28 AWG [0.08 mm ],
28 AWG [0.08 mm ],
.050 [1.27] centerline
.050 [1.27] centerline
.050 [1.27] centerline and
30 AWG [0.05 mm ],
Cable Size
2
.025 [0.64] centerline
Maximum cable length of 48 [1 220]
Maximum cable length of 105 [2 665]
Maximum cable length of 100 [2 540]
Produces one- to four-connector assem-
blies with unterminated tail lengths up to
12 [305]
Produces one- or two-connector assem-
blies with unterminated tail lengths up to
24 [610]
Produces one- to 10-connector assem-
blies with unterminated tail lengths up to
24 [610]
Cable Assembly
Configurations
(Refer to page 73)
Trailing connectors can be oriented up or
down
Trailing connectors can be oriented up or
down
Trailing connectors can be oriented up or
down
Automatically processes and tests
assemblies produced with pre-
manufactured slit-and-twist cable
—
—
Depending on cable lengths, can apply
and test up to 1 670 connectors per hour
Depending on cable lengths, can apply
and test up to 2 000 connectors per hour
Depending on cable lengths, can apply
and test up to 1 050 connectors per hour
Production Rates
(Refer to page 72)
108 [2 745] W x 54 [1 370] D x
60 [1 525] H; 750 lb [340 kg]
48 [1 220] W x 48 [1 220] D x
62 [1 575] H; 630 lb [286 kg]
68 [1 730] W x 58 [1 475] D x
72 [1 830] H; 1 300 lb [590 kg]
Size
Operated and programmed by a
touchscreen
Operated and programmed by a
touchscreen
Operated and programmed by a
touchscreen or a keyboard
Parameters for up to 130 cable assem-
blies can be retained in memory
Parameters for up to 150 cable assem-
blies can be retained in memory
Parameters for up to 1 000 cable assem-
blies can be retained in memory
Programmable
Another menu displays production totals
or a log of the machine events
Another menu displays production totals
or a log of the machine events
—
Automatically stops after each or three
consecutive assemblies are rejected, as
programmed by the operator
Automatically stops when either a con-
secutive number of assemblies or a
percentage of the batch run are rejected,
as programmed by the operator
Automatically stops each time a
malfunction is detected
Testing
Requires an average of 25 minutes,
depending on assembly size
Requires an average of 15 minutes,
depending on assembly size
Requires an average of 20 minutes to
1 hour, depending on assembly size
and type
Changeover
*Note: Machine may require accessories. Before ordering, contact TE at the numbers listed below.
71
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Typical Production Rates (Assemblies/Hour)
Length
24 [160]
—
405
375
360
780
265
200
Machine
Model
Connectors
Per Assembly
4 [100]
665
570
475
—
1 075
—
—
8 [205]
620
500
460
420
950
275
205
170
—
48 [1 220]
—
300
280
255
660
255
190
160
100 [2 540]
1
2
3
4
2
4
5
6
10
—
—
—
—
500
—
—
—
105
R-CAM 2A
R-CAM 3A
R-CAM 4
—
—
165
—
115
Note: Actual production rates may vary depending on the cable assembly configuration.
Available Tooling Note: Call TE at the numbers listed below for part numbers or availability.
Number of Positions
Tooling for
Connectors
ꢀꢀ
R-CAM 2A
R-CAM 3A
R-CAM 4
Ultra Novo Receptacles
AMPLIMITE .050 Series Connectors
—
—
—
—
40
68
Plugs
Receptacles
68 and 80 (Lead and Trail Modules)
68 and 80 (Lead Module Only)
Available in future
AMPLIMITE HDF-20 D-Sub.
15, 25, 37
9, 15, 25, 37
.100 x .100 DIP Plugs
Card Edge Connectors*
One End Only, 20–64
20–64
One End Only, 10–64
10–64
20–50
(10–64 Available in future)
Novo Receptacles*
2 mm Receptacles
Universal I/O Pin Connectors
20–64
—
One End Only, 20–64
10–64
12–50
—
10-64
—
Trail Module Only
* Supplied with the R-CAM 2A and R-CAM 3A only.
Reel fed version.
Order Connector Specific Tooling Packages / Feed Shear Tooling separately.
ꢀ
ꢀꢀ
Products Applied
AMPLIMITE HDF-20 D-Sub. Plugs
AMPLIMITE HDF-20 D-Sub. Receptacles
.100 x .100 DIP Plugs
Card Edge Connectors
Novo Receptacles
2 mm Receptacles
Universal I/O Pin Connectors
Pre-manufactured Slit-and-Twist Cable
(R-CAM 4 only)
Note: For more product information, call TE at the numbers listed below.
72
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Cable Assembly Configurations
R-CAM 2A
2.70 to 8
[70 to 205]
end-to-end
2.70 to 48
[70 to 1 220]
end-to-end
0 to 8
[0 to 205]
1.50 Min.
[35 Min.]
center-to-center
R-CAM 3A
1.74 to 105
[45 to 2 665]
end-to-end
0 to 24
[0 to 610]
1.74 to 105
[45 to 2 665]
end-to-end
0 to 24
[0 to 610]
1.74 to 105
[45 to 2 665]
end-to-end
R-CAM 4
1.60 to 100
[40 to 2 540]
center-to-end
1.60 to 100
[40 to 2 540]
center-to-center
1.60 Min.
[40 Min.]
center-to-center
1.25 Min.
[30 Min.]
center-to-center
3 Min.
[75 Min.]
center-to-center
0 to 24
[0 to 610]
73
Catalog 82012
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Application Tooling
Manual Arbor Frame
Assembly,
Hand Tool Kit—Part No. 768340-1
Part No. 91085-2
Terminating kit for .050 [1.27] centerline ribbon cable with
2
28 or 26 AWG [0.08 or 0.15 mm ] stranded or solid, or
Bench frame for applying a
variety of IDC connectors,
including AMPMODU MT
and CHAMP. Features
adjustable ram and handle,
and a slide base. Tooling is
mounted to the ram and into
the tracks of the base plate.
2
30 AWG [0.05 mm ] solid conductors. Includes commercial
grade hand tool with ratchet control for complete termination
cycle, base assembly, bench-mount, tooling sets for stan-
dard and Novo receptacles, card edge connectors and D-
Sub HDF low-profile connectors, and a carrying case.
Tooling Instruction Sheets
408-7777—Manual Arbor Frame
Assembly
408-6732—Pneumatic Auto-Cycle
Assembly
408-9828—Hand Tool Kit 768340-1
for Connector-Specific Kits
Pneumatic Foot Pedal Unit
Part No. 91112-2
Pneumatic Auto-Cycle
Unit, Part No. 91112-3
Foot pedal indicates cycle—
features adjustable ram and
cycle time.
Basically an air-powered
version of Manual Arbor
Frame Assembly 91085-2.
Features adjustable ram
and cycle time, and auto-
matic cycling when the
lower assembly is slid into
the frame to the rear of the
base plate. Includes a
guard around the frame
opening.
74
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Low Profile Headers
Product Facts
I Available in selected
positions 10 thru 60
I Flame retardant,
thermoplastic housings,
94V-0 rated
I Vertical and right-angle
versions available in double
row configurations
I Available in .025 [0.64]
square drawn wire posts
I Wash out clearance for flux
removal
I Mates with Ribbon Cable
Connectors
I Available with and without
eject latches
I Available with and without
“kinked” soldertails for PCB
retention
Technical Documents
Product Specifications
108-40018
Performance
I Headers are recognized
under the Component
Program of Underwriters
Laboratories Inc.
Characteristics
Electrical
Insulation Resistance —
5,000 megohms minimum initial
R
File No. E28476
Dielectric Withstanding Voltage —
I Headers are certified by
1,000 V rms at sea level
Canadian Standards
Current — 1 ampere maximum
per contact
Operating Voltage — 250 VAC
Association,
File No. LR 7189
R
I Low profile IDC headers are
recognized under the
Component Program of
Underwriters
Environmental
Operating Temperature —
-65°C to +105°C
R
Laboratories Inc.
File No. E60980, Vol. 5
75
Catalog 82012
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
reference purposes only.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
+.000
-.010
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
A
+0.00
[
-0.25
]
.045
[1.14]
B
Pin 1
.015
.010
.130
[3.30]
.165
[4.19]
0.38
[0.25]
.360
[9.14]
.001
0.03
]
Typ.
.025
[0.64
.100
[2.54]
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Pin 2
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.001
.025
[0.64
0.03
]
.041
[1.04]
.388
[9.86]
.015
.120
[3.05
0.38
]
.240
[6.10]
.100
[2.54]
.010
0.25
.185
[4.70
.185
[4.70]
Typ.
Typ.
]
.100
[2.54]
.100
[2.54]
.003
0.08
.035
[0.89
Dia. Typ.
]
Related Product Data
Electrical Characteristics —
Recommended PC Board Hole Layout
For Manual Insertion
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
Plating A
5103309-1
5103309-2
5103309-3
5103309-5
—
Plating B
10
14
16
20
24
26
34
40
50
60
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5103308-1
5103308-2
5103308-3
5103308-5
1-5103308-3
5103308-6
5103308-7
5103308-8
1-5103308-0
1-5103308-2
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series —
pages 48-55
5103309-6
5103309-7
5103309-8
1-5103309-0
—
Note: All part numbers are RoHS compliant.
76
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Specifications subject
to change.
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
Position No.1
Indicator
•
.388
[9.86]
.165
[4.19]
.001
0.03
.025
[0.64
Typ.
]
+.000
-.010
+0.00
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
A
[
]
-0.25
Pin 1
B
Posts — Brass, plated as follows:
.240
[6.09]
.100
[2.54]
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.130
[3.31]
Typ.
.001
.025
[.635
0.03
]
.360
[9.14]
Typ.
+.020
-.010
+0.51
-0.25
.135
3.42
[
]
.015
.010
0.38
0.25
.010
.185
[4.69
Typ.
.185
[4.69]
Typ.
0.25
]
.100
[2.54]
Pin 2
[
]
.123
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
[3.12]
.100
[2.54]
Typ.
.100
[2.54]
.003
.035
0.08
[0.89
Dia. Typ.
]
Recommended PC Board Hole Layout
For Manual Insertion
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Dimensions
B
Post Plating/Part Nos.
Plating B
No. of
Pos.
A
Plating A
5103311-1
5103311-2
5103311-3
5103311-5
5103311-6
5103311-7
5103311-8
10
14
16
20
26
34
40
50
60
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5103310-1
5103310-2
5103310-3
5103310-5
5103310-6
5103310-7
5103310-8
1-5103310-0
—
1-5103311-0
1-5103311-2
Note: All part numbers are RoHS compliant.
77
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention
Vertical PCB Mount
+.005
-.010
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
A
+0.13
[
-0.25
]
.045
[1.14]
B
Pin 1
.025
.020
.130
[3.30]
.165
[4.19]
0.64
[0.51]
.360
[9.14]
.100
[2.54]
Material and Finish
Housing — Glass-filled PPA,
UL 94V-0 rated, black
.025 .001
[0.64 0.03]
Typ.
Pin 2
Posts — Brass, plated as follows:
.001
0.03
.025
[0.64
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
]
.041
[1.04]
.015
0.38
.120
[3.05
.388
[9.86]
]
.240
[6.10]
.100
[2.54]
.185
[4.69]
2 Plcs.
.185
[4.69]
2 Plcs.
Related Product Data
Electrical Characteristics —
page 75
.100
[2.54]
Typ.
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
.100
[2.54]
.003
0.08
.040
[1.02
]
Dia. Typ.
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Recommended PC Board Hole Layout
For Manual Insertion
Dimensions
No. of
Pos.
Post Plating
Part Nos.
A
B
10
14
16
20
24
26
34
40
50
60
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5104338-1
5104338-2
5104338-3
5104338-4
5104338-5
5104338-6
5104338-7
5104338-8
5104338-9
1-5104338-0
Note: All part numbers are RoHS compliant.
78
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Specifications subject
to change.
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for
PCB Retention (Continued)
Position No.1
Indicator
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End) with Board
Retention Feature
•
.388
[9.86]
.165
[4.19]
.001
0.03
.025
[0.64
Typ.
]
+.005
-.010
+0.13
A
Pin 1
[
]
-0.25
.045
[1.14]
2 Plcs.
B
.240
[6.09]
.130
Typ.
Material and Finish
[3.30]
.100
[2.54]
Housing — Glass-filled PPA,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
.025 .001
.360
[9.14]
[.635 0.03]
Typ.
+.020
-.010
+0.51
-0.25
.125
3.18
[
]
Plating — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.025
.020
.185
[4.69]
2 Plcs.
0.64
.185
[4.69]
2 Plcs.
[0.51]
.100
[2.54]
Pin 2
.123
[3.12]
.100
Typ.
[2.54]
Related Product Data
.100
[2.54]
Electrical Characteristics —
page 75
.040 .003
[1.02 0.08]
Dia. Typ.
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
Recommended PC Board Hole Layout
For Manual Insertion
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Dimensions
No. of
Pos.
Post Plating
Part Nos.
A
B
10
14
16
20
24
34
40
50
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
5104340-1
5104340-2
5104340-3
5104340-4
5104340-5
5104340-7
5104340-8
5104340-9
Note: All part numbers are RoHS compliant.
79
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Specifications subject
to change.
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
B
Pin 2
.362
[9.19]
.006
0.15
.254
[6.45
]
.100
[2.54]
Pin 1
Position #1 Indicator
.001
0.03
.025
[0.64
]
.001
0.03
.025
[0.64
.012
0.30
]
.888
[22.56
]
Material and Finish
Latching
Height
.575
Latch
For Long
Eject Latch
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
Long
.012
0.30
[14.61]
.427
[10.85]
.728
[18.49
]
Short
Housing
For Short
Eject Latch
.006
0.15
.404
[10.26
]
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.007
0.18
]
.237
[6.02
Post
.015
0.38
.102
[2.59
A
Ø .031
[0.79]
]
Max.
.100
[2.54]
.100
[2.54]
.003
0.08
Ø .035
[0.89
Related Product Data
]
Electrical Characteristics —
page 75
Recommended PC Board Layout
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Part Numbers
Dimensions
No. of
Pos.
Pin Header with Short Latches
(Mates with Receptacles
without Strain Relief)
Pin Header with Long Latches
(Mates with Receptacles
with Strain Relief)
A
B
.800
.400
10
14
16
20
24
26
30
34
40
50
60
1761608-3
1761608-5
1761608-6
1761608-7
1761608-8
1761608-9
—
1761606-3
1761606-5
20.32
10.16
1.000
25.40
.600
15.24
1.100
27.94
.700
17.78
1761606-6
1.300
33.02
.900
22.86
1761606-7
1.500
38.10
1.100
27.94
1761606-8
1.600
40.64
1.200
30.48
1761606-9
1.800
45.72
1.400
35.56
1-1761606-0
1-1761606-1
1-1761606-3
1-1761606-5
1-1761606-6
2.000
50.80
1.600
40.64
1-1761608-1
1-1761608-3
1-1761608-5
1-1761608-6
2.300
58.42
1.900
48.26
2.800
71.12
2.400
60.96
3.300
83.82
2.900
73.66
Note: All part numbers are RoHS compliant.
80
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,
Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
B
Pin 2
.362
[9.19]
.006
0.15
.254
[6.45
]
.100
[2.54]
Pin 1
Latching
Height
.575
.001
.025
[0.64
Position #1 Indicator
0.03
]
Long
[14.61]
.427
[10.85]
Material and Finish
Short
.001
.025
[0.64
0.03
]
Housing — Glass-filled PBT,
UL 94V-0 rated, black
Posts — Brass or phosphor bronze,
plated as follows:
.012
0.30
.888
[22.56
Latch
]
]
For Long
Eject Latch
U
.012
0.30
.728
[18.49
.007
0.18
Housing
.237
[6.02
Plating — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
.030
[0.76]
.006
0.15
]
.404
[10.26
For Short
Eject Latch
]
.100
[2.54]
Post
.010
U
.102
[2.59
0.25
]
A
Ø .031
Max.
[0.79]
Section U-U
.100
[2.54]
Related Product Data
Electrical Characteristics —
page 75
.100
[2.54]
.003
0.08
Ø .035
[0.89
Mateable Connectors —
]
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Recommended PC Board Layout
Part Numbers
Dimensions
No. of
Pos.
Pin Header with Short Latches
(Mates with Receptacles
without Strain Relief)
Pin Header with Long Latches
(Mates with Receptacles
with Strain Relief)
A
B
.800
.400
10
14
16
20
26
34
40
50
60
1761609-3
1761609-5
1761607-3
1761607-5
20.32
10.16
1.000
25.40
.600
15.24
1.100
27.94
.700
17.78
1761609-6
1761607-6
1.300
33.02
.900
22.86
1761609-7
1761607-7
1.600
40.64
1.200
30.48
1761609-9
1761607-9
2.000
50.80
1.600
40.64
1-1761609-1
1-1761609-3
1-1761609-5
1-1761609-6
1-1761607-1
1-1761607-3
1-1761607-5
1-1761607-6
2.300
58.42
1.900
48.26
2.800
71.12
2.400
60.96
3.300
83.82
2.900
73.66
Note: All part numbers are RoHS compliant.
81
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
.013
[0.33]
B
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
Pin 2
+ .010
– .004
+ 0.25
– 0.10
+ .005
– .010
+ 0.13
– 0.25
.252
.350
[6.40
]
[8.89
]
.100
[2.54]
Pin 1
A
.001
0.03
.025
[0.63
.001
.025
[0.63
Eject Latches
Not Shown in
Top and Side
View for Clarity
]
0.03
]
U
.020
0.51
.020
0.51
.826
[20.98
.665
Long
]
Short
]
.010
0.25
.240
[6.10
[16.89
Material and Finish
.350
[8.89]
]
.013
Housing and Eject Latches —
PBT, UL 94V-0 rated, blue
[0.33]
Posts — Phosphor bronze, plated as
.006
.576
[14.62
.419
Long
0.15
.006
0.15
follows:
]
Ø .031
[0.79]
Max.
.015
0.38
Position #1 Indicator
U
C
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
Short
[
]
[10.64
]
With Latches
Section U-U
A
.001
0.03
.025
[0.63
]
U
.350
[8.89]
.013
[0.33]
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
Position #1 Indicator
U
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Without Latches
.100
[2.54]
.100
[2.54]
.003
0.08
Ø .035
[0.89
]
Recommended PC Board Layout
Part Numbers
Dim. C
No. of
Dimensions
Pin Header
without
Latches
Pin Header with Short Latches
(Mates with Receptacles
without Strain Relief)
Pin Header with Long Latches
(Mates with Receptacles
with Strain Relief)
(Soldertail
Pos.
A
B
Length)
10
14
16
20
24
26
30
34
40
50
60
10
14
16
20
24
26
34
40
50
1.250 [31.75]
1.450 [36.83]
1.550 [39.37]
1.750 [44.45]
1.950[49.53]
2.050 [52.07]
2.250 [57.15]
2.450 [62.23]
2.750 [69.85]
3.250 [82.55]
3.750 [95.25]
1.250 [31.75]
1.450 [36.83]
1.550 [39.37]
1.750 [44.45]
1.950[49.53]
2.050 [52.07]
2.450 [62.23]
2.750 [69.85]
3.250 [82.55]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
1761693-3
1761685-3
—
1761686-3
1761686-5
1761686-6
1761686-7
1761686-8
1761686-9
—
—
—
1761685-6
1761685-7
1761685-8
1761685-9
1-1761685-0
1-1761685-1
1-1761685-3
1-1761685-5
1-1761685-6
1761687-3
—
—
1761693-8
.102
—
2.59
—
1-1761693-1
1-1761686-1
1-1761686-3
1-1761686-5
—
—
—
1-1761693-6
1761694-3
—
—
—
—
—
—
—
1761687-7
—
1761688-7
1761688-8
1761688-9
1-1761688-1
—
.165
4.19
—
1761694-9
1761687-9
1-1761687-1
1-1761687-3
—
—
—
—
1-1761688-5
Note: All part numbers are RoHS compliant.
82
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
IDC Low Profile Ejection Style Pin Headers, Center Polarized,
.100 x .100 [2.54 x 2.54] Centerlines (Continued)
Right-Angle PCB Mount
.025 [0.64] Square Post
(Mating End)
B
.013
[0.33]
Pin 2
+ .010
– .004
+ 0.25
– 0.10
+ .005
– .010
+ 0.13
– 0.25
.252
.350
[6.40
]
[8.89
]
.100
[2.54]
Pin 1
A
.001
0.03
.025
[0.63
Eject Latches
Not Shown in
Top and Side
View for Clarity
]
.001
0.03
.025
[0.63
.020
0.51
]
.826
[20.98
]
U
Material and Finish
Long
.020
0.51
.665
[16.89
Housing and Eject Latches —
.030
]
.350
[8.89]
PBT, UL 94V-0 rated, blue
[0.76]
.100
[2.54]
.013
[0.33]
Short
Posts — Phosphor bronze, plated as
follows:
.006
0.15
.006
0.15
.010
0.25
]
Plating — Duplex plated, .000030
[0.00076] min. gold on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
.576
[14.62
.419
.240
[6.10
Long
Short
]
]
Position #1 Indicator
U
.015
0.38
Ø .031
[0.79]
Max.
C
[10.64
[
]
With Latches
A
Section U-U
.001
0.03
.025
[0.63
]
U
Related Product Data
Electrical Characteristics —
page 75
.350
[8.89]
.013
[0.33]
Mateable Connectors —
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series — pages 48-55
Position #1 Indicator
U
Without Latches
.100
[2.54]
.100
[2.54]
.003
0.08
Ø .035
[0.89
]
Recommended PC Board Layout
Part Numbers
Dim. C
(Soldertail
Length)
Dimensions
No. of
Pos.
Pin Header with Long Latches
(Mates with Receptacles
with Strain Relief)
A
B
16
24
26
30
60
10
34
40
1.550 [39.37]
1.950[49.53]
2.050 [52.07]
2.250 [57.15]
3.750 [95.25]
1.250 [31.75]
2.450 [62.23]
2.750 [69.85]
.700 [17.78]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
2.900 [73.66]
.400 [10.16]
1.600 [40.64]
1.900 [48.26]
1761690-6
1761690-8
.102
1761690-9
2.59
1-1761690-0
1-1761690-6
1761692-3
.165
4.19
1-1761692-1
1-1761692-3
Note: All part numbers are RoHS compliant.
83
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
.100
Pin 2
[2.54]
.150
[3.81]
.165
.190
.240
[6.10]
Ø .025
[0.64]
.253
[6.43]
[4.19]
[4.83]
.100
[2.54]
.336
.315
[8.53]
[8.00]
.150
[3.81]
.050
[1.27]
.107
[2.72]
.289
A
[7.34]
.110
[2.79]
.155
or
.025
B
C
[0.64]
Pin Header
with Latches
Pin 1
[3.94]
Solder Tail
Position No.1
Indicator
.096
[2.44]
2 Plc.
.025
[0.64]
Dia.
•
Pin Header
without Latches
.106
[2.74]
.549
[13.94]
Material and Finish
Housing & Latches—Black PBT or
nylon, UL 94V-0 rated
D
.195
[4.95]
Contacts — Brass; duplex plated (See
chart, page 85)
Related Product Data
Mateable Receptacles —
pages 48-55
Dimensions
No. of
Positions
A
B
C
D
E
F
Accessories —
.700
1.100
1.260
.860
1.100
.400
10
17.78
27.94
32.00
21.84
27.94
10.16
Snap-In Polarizer — page 63
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.260
57.40
2.460
62.48
2.760
70.10
1.060
26.92
1.180
29.46
1.360
34.54
1.560
39.62
1.660
42.16
1.860
47.24
2.060
52.32
2.360
59.94
1.300
33.02
1.400
35.56
1.800
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
14
16
20
24
26
30
34
40
50
60
64
Technical Documents
Product Specifications
108-40018 Pin Headers
2.700
68.58
3.200
81.28
3.400
86.36
3.100
78.74
3.600
91.44
3.800
96.52
3.260
82.80
3.760
95.50
3.960
100.58
2.860
72.64
3.360
85.34
3.560
90.42
3.100
78.74
3.600
91.44
3.800
96.52
2.400
60.98
2.900
73.66
3.100
78.74
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot
for snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual
polarization, located as shown.
Notes: 3. For information regarding latch/pin header applications and
for ordering latches separately, refer to page 96.
84
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
Pin Header w/
Short Latches
(Mates with AMP-LATCH
Receptacles without
Strain Relief)
Pin Header w/
Contact
Finish
(Plating
Code)
Pin Header
without
Latches
Long Latches
(Mates with AMP-LATCH
Receptacles with
Strain Relief)
Soldertail
Length
No. of
Positions
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
5102153-1
5102154-1
5102153-2
5102154-2
5102153-3
5102154-3
5102153-4
5102154-4
5102153-5
5102154-5
5102153-6
5102154-6
5102153-7
5102154-7
5102153-8
5102154-8
5102153-9
5102154-9
1-5102153-0
1-5102154-0
—
5499910-1
5499160-1
5499910-2
5499160-2
5499910-3
5499160-3
5499910-4
5499160-4
5499910-5
—
5499922-1
5499206-1
5499922-2
5499206-2
5499922-3
5499206-3
5499922-4
5499206-4
5499922-5
5499206-5
5499922-6
5499206-6
5499922-7
5499206-7
5499922-8
5499206-8
5499922-9
5499206-9
1-5499922-0
1-5499206-0
1-5499922-1
1-5499206-1
1-5499922-2
1-5499206-2
5499923-1
5102321-1
—
10
14
16
20
24
26
30
34
40
50
60
64
10
14
16
20
24
26
30
34
40
50
60
64
5499910-6
5499160-6
5499910-7
—
.110
2.79
5499910-8
5499160-8
5499910-9
5499160-9
1-5499910-0
1-5499160-0
—
1-5102154-1
1-5102153-2
1-5102154-2
5102155-1
5102156-1
—
—
—
1-5499160-2
—
5499374-1
—
5102156-2
5102155-3
5102156-3
—
5499374-2
—
5102321-2
5499923-3
5102321-3
5499923-4
5102321-4
5499923-5
5102321-5
5499923-6
5102321-6
5499923-7
5102321-7
5499923-8
5102321-8
5499923-9
5102321-9
1-5499923-0
1-5102321-0
1-5499923-1
1-5102321-1
1-5499923-2
1-5102321-2
—
—
5102156-4
—
5499374-4
—
5102156-5
5102155-6
5102156-6
—
5499374-5
—
5499374-6
—
.155
3.94
5102156-7
5102155-8
5102156-8
5102155-9
5102156-9
1-5102155-0
1-5102156-0
—
—
5499911-8
5499374-8
5499911-9
5499374-9
—
1-5499374-0
—
1-5102156-1
1-5102155-2
1-5102156-2
—
—
—
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Note: All part numbers are RoHS compliant.
85
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
E
F
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
cations and part nos. for
ordering this hardware are
presented below.
.106
[2.88]
Dia.
(For Nut & Bolt
hardware)
.100
[2.54]
.100
[2.54]
.116
[2.95]
Dia.
(For Self-Tapping
Screw hardware)
.060
[1.52]
.350
[8.89]
.035
[0.89]
Dia.
Position No. 1
Recommended Mounting Hole Pattern
For Vertical PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
Latch
(See Note
at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
.256
[6.50]
4-24
Self-Tapping
Screw
(2 Req‘d.)
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
Note: All part numbers are RoHS compliant.
86
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
.100
[2.54]
Vertical PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
.150
[3.81]
.165
[4.19]
.190
[4.83]
.253
[6.43]
Pin 2
.336 .315
[8.53] [8.00]
.050
[1.27]
.150
[3.81]
A
Pin 1
B
C
.240
[6.10]
.030
Pin Header
without Latches
[0.76]
.025
[0.64]
Material and Finish
.107
[2.72]
.174
[4.42]
.610
[15.49] Length
Tail
or
Housing — Black PBT or nylon,
UL 94V-0 rated
.289
[7.34]
Contacts—Copper alloy; duplex plated
(See chart, page 88)
.025
[0.64]
Position No. 1
Indicator
Related Product Data
Mateable Receptacles —
pages 48-55
.549
[13.9]
Accessories —
Snap-In Polarizer — page 63
Technical Documents
.025
[0.64]
Product Specifications
108-40019 Pin Headers with
ACTION PIN Contacts
Dimensions
C
No. of
Application Specification
114-40020 AMP-LATCH Universal
Headers with ACTION PIN Contacts
Positions
A
B
D
E
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
3.400
86.36
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
1.260
32.00
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.260
57.40
2.460
62.48
2.760
70.10
3.260
82.80
3.760
95.50
3.960
100.58
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
3.800
96.52
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.96
2.900
73.66
3.100
78.74
10
14
16
20
24
26
30
34
40
50
60
64
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-
in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
Notes: 3. For information regarding latch/pin header applications and for
ordering latches separately, refer to page 96.
87
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military,
Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Contact
Finish
(Plating Code)
Pin Header
(without
Latches)
Tail
Length
No. of
Positions
10
14
16
20
24
26
30
34
40
50
64
10
14
16
20
26
34
40
50
60
1658694-6
1658694-7
1658694-8
1658694-1
1658694-9
1658694-2
1-1658694-0
1-1658694-1
1658694-3
1658694-4
1658694-5
1658695-2
1658695-3
1658695-4
1658695-5
1658695-6
1658695-1
1658695-7
1658695-8
1658695-9
.174
B
[4.42]
.610
[15.49]
B
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the tails,
over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold
on the mating surfaces, .000100 [0.00254] min. tin plate on the tails, over
.000050 [0.00127] min. nickel underplate.
Mounting Information
D
E
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
cations and part nos. for
ordering this hardware are
presented on page 86.
.106
[2.69]
Dia.
.100
[2.54]
.100
[2.54]
.060
[1.52]
.350
*
[8.89]
Position No. 1
Recommended Mounting Hole Pattern
For Vertical PCB Mount Header
With ACTION PIN Contacts
*For .080 [2.03] min. thick PCB refer to
Application Specification 114-40020 for hole
size and finish recommendations.
Note: All part numbers are RoHS compliant.
88
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
.100
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End)
Pin 2
[2.54]
.150
.165
[4.19]
[3.81]
.253
[6.43]
.190
[4.83]
.336
[8.53]
.315
[8.00]
.050
[1.27]
.150
[3.81]
A
B
C
Pin 1
.025
[0.64]
Pos. No. 1 Indicator
.096
[2.44]
Pin Header
with Latches
.549
[13.94]
.108
[2.74]
.195
[4.95]
D
.025
[0.64]
Dia.
.038
[0.97]
.110
[2.79] or [3.94]
.100
[2.54]
.155
.240
[6.10]
Pin Header
without Latches
Typ.
Typ.
.100
[2.54]
Solder Tail
Material and Finish
Housing & Latches — Black PBT or
.025
[0.64]
nylon, UL 94V-0 rated
.107
[2.72]
.289
[7.34]
Contacts — Brass; duplex plated
(See chart, page 90)
Related Product Data
Mateable Receptacles —
pages 48-55
Accessories —
Snap-In Polarizer — page 63
Dimensions
No. of
Positions
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.700
43.18
1.900
48.26
2.200
55.88
2.700
68.58
3.200
81.28
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.100
53.34
2.300
58.42
2.600
66.04
3.100
78.74
3.600
91.44
C
D
E
.860
21.84
1.060
26.92
1.180
29.46
1.380
34.54
1.560
39.62
1.660
42.16
1.860
47.24
2.060
52.32
2.360
59.94
2.860
72.64
3.360
85.34
F
1.260
32.00
.860
21.84
.400
10.16
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.400
35.56
1.600
40.64
1.900
48.26
2.400
60.98
2.900
73.66
3.100
78.74
10
14
16
20
24
26
30
34
40
50
60
64
1.460
37.08
1.060
26.92
1.560
39.62
1.180
29.46
Technical Documents
Product Specifications
108-40018 Pin Headers
1.760
44.70
1.380
34.54
1.960
49.78
1.560
39.62
2.060
52.32
1.660
42.16
2.260
57.40
1.860
47.24
2.460
62.48
2.060
52.32
2.760
70.10
2.360
59.94
3.260
82.80
2.860
72.64
3.760
95.50
3.360
85.34
3.400
86.36
3.800
96.52
3.960
100.58
3.560
90.42
3.560
90.42
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for
snap-in polarizer (military polarization), located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization,
located as shown.
89
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
and millimeters unless
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
otherwise specified.
USA: +1 (800) 522-6752
www.te.com
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Right-Angle PCB Mount
.025 [0.64] Sq. Posts
(Mating End) (Continued)
Pin Header w/
Short Latches
(Mates with
Pin Header w/
Contact
Finish
(Plating
Code)
Pin Header
without
Latches
Long Latches
(Mates with
Soldertail
Length
No. of
Positions
Receptacles without
Strain Relief)
Receptacles with
Strain Relief)
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
5102159-1
5102160-1
5102159-2
—
5499913-1
5499786-1
5499141-1
5499786-2
5499141-2
—
10
14
16
20
24
26
30
34
40
50
60
64
10
14
16
20
24
26
30
34
40
50
60
64
5499345-1
5499913-2
5499345-2
5102159-3
5102160-3
5102159-4
5102160-4
—
5499913-3
—
5499141-3
5499786-4
5499141-4
5499786-5
—
5499913-4
—
5499913-5
5102160-5
5102159-6
5102160-6
5102159-7
—
5499345-5
5499913-6
5499786-6
5499141-6
—
—
.110
2.79
5499913-7
—
5499141-7
5499786-8
5499141-8
5499786-9
5499141-9
1-5499786-0
1-5499141-0
1-5499786-1
1-5499141-1
1-5499786-2
1-5499141-2
—
5102159-8
5102160-8
5102159-9
5102160-9
1-5102159-0
1-5102160-0
1-5102159-1
1-5102160-1
1-5102159-2
1-5102160-2
—
5499913-8
—
5499913-9
5499345-9
1-5499913-0
1-5499345-0
1-5499913-1
—
—
—
—
5102162-1
5102161-2
5102162-2
—
—
5102322-1
5499925-2
5102322-2
—
—
—
—
—
—
5102322-3
—
5102161-4
—
5499914-4
—
5102322-4
5499925-5
5102322-5
—
5102161-5
5102162-5
—
—
—
—
—
—
5102322-6
—
.155
3.94
5102161-7
5102162-7
5102161-8
5102162-8
—
—
—
—
5499914-8
—
—
5102322-8
—
—
—
5499376-9
—
—
—
—
—
—
—
—
1-5499925-0
—
1-5102162-0
—
—
1-5102162-1
—
—
—
1-5102162-2
—
Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min.
nickel underplate.
Note: All part numbers are RoHS compliant.
90
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Mounting Information
No mounting hardware
is supplied by TE.
E
.106
[2.69]
F
Dia.
.100
[2.54]
.100
[2.54]
.029
[0.74]
.230
[5.84]
.035
[0.89]
Dia. Typ.
Position No.1
Recommended Mounting Hole Pattern
For Right-Angle PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.125 [3.18] for .155 [3.94] long posts.
91
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
and millimeters unless
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
otherwise specified.
USA: +1 (800) 522-6752
www.te.com
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
Vertical PCB Mount
.025 [0.64] Sq. Posts
(without latches)
Pin 2
.100
[2.54]
Dia.
E
2 Holes
.100
[2.54]
.150
[3.81]
.050
[1.27]
C
Pin 1
Position No.1 Indicator
Pinless Header
Material and Finish
Housing — Black PBT or nylon,
UL 94V-0 rated
•
.549
[13.9]
Related Product Data
.315
Mateable Receptacles —
[8.00]
B
A
pages 48-55
.096
[2.44]
2 Holes
Accessories —
Snap-In Polarizer — page 63
Dia.
Technical Documents
Product Specifications
108-40018 Pin Headers
Dimensions
B
Pinless Header Part Nos.
No. of
Pos.
A
C
E
Press-Fit
Clearance-Fit
1.260
.860
1.100
.400
10
14
16
20
24
26
34
40
50
60
64
499726-1
—
102142-6
32.00
21.84
27.94
10.16
1.460
37.08
1.560
39.62
1.760
44.70
1.960
49.78
2.060
52.32
2.460
62.48
2.760
70.10
3.260
82.80
1.060
26.92
1.160
29.46
1.360
34.54
1.560
39.62
1.660
42.16
2.060
52.32
2.360
59.94
2.860
72.64
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.300
58.42
2.600
66.04
3.100
78.74
.600
15.24
.700
17.78
.900
22.86
1.100
27.94
1.200
30.48
1.600
40.64
1.900
48.26
2.400
60.96
102142-8
102142-9
102142-1
1-102142-0
102142-2
102142-3
102142-4
102142-5
102142-7
1-102142-3
—
—
—
—
499726-8
499726-9
1-499726-0
1-499726-1
1-499726-2
3.760
95.50
3.960
100.58
3.360
85.34
3.560
90.42
3.600
91.44
3.800
96.52
2.900
73.66
3.100
78.74
Notes: 1. 10- and 14-position pinless headers have only one slot for snap-in polarizer (military polarization).
2. 10-position pinless headers have only one slot for dual polarization.
3. For information regarding latch/pin header applications and for ordering latches separately,
refer to page 96.
All part numbers are RoHS compliant.
Note: All part numbers are RoHS compliant.
92
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pinless Headers, Military, Center
and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued)
Installation of Press-Fit
Pinless Headers
FORCE
FORCE
Insertion Instructions:
1. Place pinless header
over preinstalled posts
so that post tips start into
header cavities.
Steel Block
(Centered over
Header)
2. With bottom of pc board
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
Pinless Header
.025
[0.64]
.529
[13.44]
Sq. Posts
Preinstalled in
PC Board
3. Apply an even, centered
force on steel block until
header bottoms on pc
board. If posts are longer
than .545 [13.84], they
may be forced against
the steel block before the
header is fully seated. In
this situation, extreme
caution must be taken so
that posts are not dam-
aged or pushed out of
the pc board.
PC Board
Insertion Force: 60 lb. [267 N] max.
Retention Force: 20 lb. [89 N] min.
TE recommends the use of a typical manual frame assembly for insertion of
pinless headers.The frame assembly and steel block are not supplied by TE.
93
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End)
C
.195
.200
[5.08]
[4.95]
.549
.040
[13.94]
[1.02]
.110
[2.79]
•
.025
[0.64]
Position No.1
Indicator
Vertical PCB Mount
A
B
D
Pin 1
.250
[6.35]
.289
[7.34]
.150
[3.81]
.050
[1.27]
.240
[6.10]
.110
[2.79]
.100
[2.54]
.315
[8.00]
.340
[8.64]
Right-Angle PCB Mount
.100
[2.54]
Ø .025
[0.64]
.100
[2.54]
.165
[4.19]
.100
[2.54]
.150
[3.81]
.129
[3.28]
Material and Finish
Housing — Red PCT, UL 94V-0 rated
Pin 2
.350
[8.89]
Contacts — Brass; Gold flash over pal-
ladium-nickel plate, .000030 [0.00076]
min. total on the mating surfaces,
.000100 [0.00254] min. tin plate on the
soldertails, over .000050 [0.00127] min.
nickel underplate or .000030 [0.00076]
min. gold on the mating surfaces,
.000100 [0.00254] min. tin plate on
the soldertails, over .000050 [0.00127]
min. nickel underplate
E
Vertical
C
.040
[1.02]
.200
[5.08]
.195
[4.95]
Related Product Data
Mateable Receptacles —
pages 48-55
.549
[13.94]
.110
[2.79]
.096
Dia.
2 Plc.
•
[2.44]
Accessories —
Snap-In Polarizer — page 63
.025
[0.64]
Position No.1
Indicator
Technical Documents
Product Specifications
108-40018 Pin Headers
A
Pin 1
B
D
.289
.250
[6.35]
[7.34]
.240
[6.10]
.050
[1.27]
.150
[3.81]
.100
[2.54]
.110
[2.79]
.315 .340
[8.00] [8.64]
.100
[2.54]
.100
[2.54]
.150
[3.81]
.151
[3.84]
.165
[4.19]
.129
[3.28]
Ø .025
[0.64]
.100
.350
[8.89]
[2.54]
Pin 2
E
Right-Angle
94
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Universal Ejection Style Pin Headers with PCT Housing, .100 x .100
[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) (Continued)
Part Numbers
Vertical
Pin Header
(without
Right-Angle
Pin Header
(without
Dimensions
C
No. of
Pos.
A
B
D
E
Latches)
Latches)
1.260
1.100
.860
.700
.400
10
14
16
20
24
26
30
34
40
50
60
64
5111008-1
—
—
32.00
27.94
21.84
17.78
10.16
1.460
37.08
1.300
33.02
1.060
26.92
.900
22.86
.600
15.24
5111105-2
5111105-3
5111105-4
5111105-5
5111105-6
5111105-7
5111105-8
5111105-9
1-5111105-0
1-5111105-1
1-5111105-2
1.560
39.62
1.400
35.56
1.160
29.46
1.000
25.40
.700
17.78
—
1.760
44.70
1.600
40.64
1.360
34.54
1.200
30.48
.900
22.86
—
1.960
49.78
1.800
40.64
1.560
39.62
1.400
35.56
1.100
27.94
5111008-5
—
2.060
52.32
1.900
48.26
1.660
42.16
1.500
38.10
1.200
30.48
2.260
57.40
2.100
53.34
1.860
47.24
1.700
43.18
1.400
35.56
5111008-7
5111008-8
5111008-9
1-5111008-0
1-5111008-1
1-5111008-2
2.460
62.48
2.300
58.42
2.060
52.32
1.900
48.26
1.600
40.64
2.760
70.10
2.600
66.04
2.360
59.94
2.200
55.88
1.900
48.26
3.260
82.80
3.100
78.74
2.860
72.64
2.700
68.58
2.400
60.98
3.760
95.50
3.600
91.44
3.360
85.34
3.200
81.28
2.900
73.66
3.960
100.58
3.800
96.52
3.560
90.42
3.400
86.36
3.100
78.74
.106
[2.69]
Typ.
Dia.
Dia.
Position No. 1
.100
[2.54]
B
.100
.070
[1.78]
.090
[2.29]
Typ.
[2.54]
Typ.
C of Holes
L
.060
[1.52]
.110
[2.79]
of Stencil Pattern
.035
[0.89]
After Plating
C of Holes
L
Recommended PC Board Mounting Pattern for Vertical Header
.106
[2.69]
Typ.
Dia.
Dia.
Position No. 1
C
.100
[2.54]
.100
[2.54]
Typ.
.070
.090
[2.29]
Typ.
[1.78]
C of Holes
L
.475 Max.*
[12.07]
.035
[0.89]
After Plating
.110
[2.79]
of Stencil Pattern
.029
[.736]
C of Holes
L
Board Edge
Recommended Pc Board Mounting Pattern for Right-Angle Header
*Max. distance from edge of PC board for daisy chain applications
Note: All part numbers are RoHS compliant.
95
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Latches for Ejection Style Universal Pin Headers and Pinless Headers
Latch/Pin Header Applications
Latches
for use with Novo
Receptacles and Female
Socket Connectors, 609,
622 & 636 Series
1.075
[27.31]
Material
Red PCT, UL 94V-0 Rated
.265
[6.73]
.576
[14.63]
Figure 1 — Use Long Latch for
AMP-LATCH Novo Receptacles with Strain Relief &
Female Socket Connectors with Strain Relief
Long Latch Part No. 111338-1
(See Figure 1)
.895
[22.73]
.416
[10.57]
.175
[4.45]
Short Latch Part No. 111293-1
(See Figure 2)
Figure 2 — Use Short Latch for
AMP-LATCH Novo Receptacles without Strain Relief &
Female Socket Connectors without Strain Relief
Material
Black thermoplastic, UL 94V-0 Rated
Material
Black thermoplastic, UL 94V-0 Rated
.576
[14.63]
.475
[12.07]
.561
[14.25]
.185
[4.70]
Ref.
.691
Ref.
[17.55]
Long Latch Part No. 102320-1
(See Figure 1)
.416
[10.57]
.008
0.20
.140
[3.56
]
Special Long Latch Part No. 1825851-1 for
AMPMODU Mod IV Housing with Center Polarization Key
Short Latch Part No. 102312-1
(See Figure 2)
Note: All part numbers are RoHS compliant.
96
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Cable Solutions
.100 [2.54] Centerline,
IDC Ribbon Cable,
PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
B
A
.050
Typ.
[1.27]
C
.010
[0.25]
Edge Mark
.100
[2.54]
Typ.
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
B
Dimensions
B
No. of
Conductors
Part
Number
No. of
Conductors
Part
Number
A
C
A
C
24 AWG 7/32 Tinned Copper
24 AWG 7/32 Overcoated Tinned Copper
2
5
.100 [2.54]
.400 [10.16]
.200 [5.08] .044 [1.12]
.500 [12.70] .044 [1.12]
57746-2
57746-5
2
5
.100 [2.54]
.400 [10.16]
.200 [5.08] .044 [1.12]
.500 [12.70] .044 [1.12]
57747-2
57747-5
10
15
20
25
28
.900 [22.86] 1.000 [25.40] .044 [1.12] 1-57746-0
1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57746-5
1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57746-0
2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57746-5
2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57746-8
10
15
20
25
28
.900 [22.86] 1.000 [25.40] .044 [1.12] 1-57747-0
1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57747-5
1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57747-0
2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57747-5
2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57747-8
26 AWG 7/34 Tinned Copper
22 AWG 7/30 Tinned Copper
2
5
.100 [2.54]
.400 [10.16]
.200 [5.08] .039 [0.99]
.500 [12.70] .039 [0.99]
57744-2
57744-5
2
5
.100 [2.54]
.400 [10.16]
.200 [5.08] .051 [1.30]
.500 [12.70] .051 [1.30]
57748-2
57748-5
10
15
20
25
28
.900 [22.86] 1.000 [25.40] .039 [0.99] 1-57744-0
1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57744-5
1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57744-0
2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57744-5
2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57744-8
10
15
20
25
28
.900 [22.86] 1.000 [25.40] .051 [1.30] 1-57748-0
1.400 [35.56] 1.500 [38.10] .051 [1.30] 1-57748-5
1.900 [48.26] 2.000 [50.80] .051 [1.30] 2-57748-0
2.400 [60.96] 2.500 [63.50] .051 [1.30] 2-57748-5
2.700 [68.58] 2.800 [71.12] .051 [1.30] 2-57748-8
26 AWG 7/34 Overcoated Tinned Copper
2
5
.100 [2.54]
.400 [10.16]
.200 [5.08] .039 [0.99]
.500 [12.70] .039 [0.99]
57745-2
57745-5
10
15
20
25
28
.900 [22.86] 1.000 [25.40] .039 [0.99] 1-57745-0
1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57745-5
1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57745-0
2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57745-5
2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57745-8
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer-
ing questions or for order placement of this cable.
97
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Cable Solutions (Continued)
.156 [3.96] Centerline,
Flat Ribbon Cable,
PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
B
A
.078
Typ.
[1.98]
C
.010
[0.25]
Edge Mark
.156
[3.96]
Typ.
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
No. of
Conductors
Part
Number
A
B
C
22 AWG 7/30 Tinned Copper
2
5
.156 [3.96]
.624 [15.85]
.312 [7.92] .051 [1.30]
.780 [19.81] .051 [1.30]
57750-2
57750-5
10
15
20
24
1.404 [35.66] 1.560 [39.62] .051 [1.30] 1-57750-0
2.184 [55.47] 2.340 [59.44] .051 [1.30] 1-57750-5
2.964 [75.29] 3.120 [79.25] .051 [1.30] 2-57750-0
3.588 [91.14] 3.744 [95.10] .051 [1.30] 2-57750-4
18 AWG 7/26 Tinned Copper
2
5
.156 [3.96]
.624 [15.85]
.312 [7.92] .068 [1.73]
.780 [19.81] .068 [1.73]
57752-2
57752-5
10
15
20
24
1.404 [35.66] 1.560 [39.62] .068 [1.73] 1-57752-0
2.184 [55.47] 2.340 [59.44] .068 [1.73] 1-57752-5
2.964 [75.29] 3.120 [79.25] .068 [1.73] 2-57752-0
3.588 [91.14] 3.744 [95.10] .068 [1.73] 2-57752-4
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer-
ing questions or for order placement of this cable.
98
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
Ribbon Cable Interconnect Solutions
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
19156
Page
86
47
47
97
97
97
97
97
98
98
41
92
86
96
96
9, 10
9, 11
11
65
20
21
21
21
27
26
26
24
24
9
Part No.
188275
188431
215079
215083
215083
215460
215460
215464
215570
338068
338069
338070
338095
338096
338097
338728
499252
499712
499726
499991
746383
746603
746610
746611
1377074
1437006
1437011
1437020
1437021
1437022
1437023
1437024
1437025
1437026
1437027
1437028
1437029
1499252
1658525
1658526
1658527
1658528
1658618
1658619
1658620
1658621
1658622
1658623
1658624
1658694
1658695
1734161
1734162
1761606
1761607
Page
36
Part No.
1761608
1761609
1761685
1761686
1761687
1761688
1761690
1761692
1761693
1761694
1825851
1888188
5088450
5102153
5102154
5102155
5102156
5102159
5102160
5102161
5102162
5102321
5102322
5103308
5103309
5103310
5103311
5104338
5104340
5111008
5111105
5111448
5111595
5111824
5499141
5499160
5499206
5499345
5499374
5499376
5499786
5499910
5499911
5499913
5499914
5499922
5499923
5499925
5746612
5746613
5746615
6437006
6489700
Page
80
81
82
82
82
82
83
83
82
82
96
15
66
85
85
85
85
90
90
90
90
85
90
76
76
77
77
78
79
95
95
46
12
15
90
85
85
90
85
90
90
85
85
90
90
85
85
90
59
59
60
61
15
57034
41
57040
32, 33, 34
57744
38
57745
32, 33, 38
57746
35
57747
32, 33, 35
57748
32, 33, 37
57750
32, 33, 39
57752
41
100411
102142
102198
102312
102320
104068
104069
104069
104072
104652
104655
104656
104693
104891
104892
104893
104894
104895
111196
111293
111338
111382
111446
111451
111492
111494
111504
111506
111547
111614
111620
111623
111626
120623
147121
147381
147382
147383
147384
147413
147503
174638
174903
175629
175637
41
41
32, 33, 40
32, 33, 40
32, 33, 40
41
14, 49, 50, 51, 68
65
92
63
86
47
58
59
44
56
69
67
67
67
64, 69
69
69
69
69
69
69
68
57
55
53
53
14
14
49
50
50
49
51
88
88
15
15
80
81
96
96
58
45
63
45
46
45
46
67
68
64
17
17
63
21
21
21
21
20
20
21
62
62
62
62
99
Catalog 82012
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches
and millimeters unless
otherwise specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG PDF 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明