首页 |元器件品牌

31049 [MACOM]

SOLISTRAND, Budget and DIAMOND GRIP; SOLISTRAND ，预算和DIAMOND GRIP
31049
型号： 31049
厂家： Tyco Electronics    Tyco Electronics
描述：

SOLISTRAND, Budget and DIAMOND GRIP
SOLISTRAND ，预算和DIAMOND GRIP
文件： 总60页 (文件大小：662K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Product Facts  
■ SOLISTRAND  
Terminals and Splices  
■ Utilize a brazed seam  
■ Applied with “W” crimp  
tooling  
■ Available in wire sizes  
26 AWG– 600 MCM  
[0.1–304 mm2]  
■ For terminating solid  
& stranded wires  
■ U.L. Listed  
CSA Certified  
Military Approved  
■ Budget  
Terminals and Splices  
■ Utilize a butted seam  
■ Applied with “F” crimp  
tooling  
■ Availble in wire  
sizes 26– 10 AWG  
[0.1–6.64 mm2]  
■ For terminating stranded  
wire only  
■ U.L. Listed  
■ DIAMOND GRIP  
Terminals and Splices  
■ Utilize a butted seam  
Need more information?  
SOLISTRAND and Budget  
terminals and splices are  
specially designed to termi-  
nate solid and stranded  
wire, irregular shaped con-  
ductors, and combinations  
of these— retaining the  
superior performance char-  
acteristics of single-purpose  
terminals and splices.  
terminals and splices fulfill  
the need for an economical  
and electrically superior ter-  
mination where extreme  
vibration and tension on the  
wires are not present.  
■ Metal insulation support  
sleeve with “V” notches  
Call the AMP Technical  
Support Center:  
1-800-522-6752  
■ Applied with a “C” crimp  
The Technical Support  
Center is staffed with spe-  
cialists well versed in all  
AMP Products. The Center  
can provide you with:  
■ Available in wire sizes  
26-10 AWG (0.1-6.64 mm2)  
DIAMOND GRIP utilizes a  
tin plated copper insulation  
support sleeve with “V”  
notches. The sleeve elimi-  
nates fraying of the insula-  
tion or breaking of the con-  
ductor. The “V” notches  
lock the wire insulation  
■ For terminating stranded  
wire only  
■ U.L. Listed  
CSA Certified  
■
Technical Support  
Corrosion resistance, vibra-  
tion resistance and tensile  
strength of these terminals  
and splices are well within  
the limits of commercial and against vibration and  
military specifications.  
■
Catalogs  
■
Technical Documents  
■
Product Samples  
■
AMP Authorized  
Distributor Locations  
pullout.  
The Budget terminal is  
primarily the same as the  
SOLISTRAND terminals  
without the brazed seam  
in the wire barrel. These  
© Copyright 1994, 1996 and 2000 by  
AMP Incorporated, Harrisburg, PA.  
All Rights Reserved.  
AMP, AMPOMATOR, AMP-O-LECTRIC,  
AMP-TAPETRONIC, CERTI-CRIMP,  
DIAMOND GRIP, PRO-CRIMPER II,  
SOLISTRAND, TAPETRONIC and  
DYNA-CRIMP are trademarks.  
1
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Table of Contents  
How to Compute Circular  
Mil Area of Various Wire Shapes ............................................................................................3  
Table of SOLISTRAND and Budget Standard Wire Ranges ..................................................3  
Table listing: Circular Mil Area for common wire sizes......................................................4– 7  
Product Descriptions ....................................................................................................8, 9, 10  
Stud Hole Sizes ....................................................................................................................11  
SOLISTRAND and Budget  
Ring Tongue Terminals...........................................................................................12– 20  
26 AWG – 600 MCM [0.1– 304 mm2]  
Right Angle Ring Tongue Terminals............................................................................21  
22 AWG – 300 MCM [0.26–152 mm2]  
Heavy Duty Ring Tongue Terminals ......................................................................22, 23  
16– 1/0 AWG [1.04– 60.6 mm2]  
Rectangular Tongue Terminals ..............................................................................24, 25  
22– 10 AWG [0.26– 6.64 mm2]  
Spade Tongue Terminals ..............................................................................................26  
26– 10 AWG [0.1– 6.64 mm2]  
Short Spring Spade Tongue Terminals ................................................................27, 28  
26– 10 AWG [0.1– 6.64 mm2]  
Long Spring Spade Tongue Terminals .......................................................................29  
26– 10 AWG [0.1– 6.64 mm2]  
Flanged Spade Tongue Terminals ..............................................................................30  
26– 10 AWG [0.1– 6.64 mm2]  
Slotted Ring Tongue Terminals ...................................................................................31  
26– 10 AWG [0.1– 6.64 mm2]  
Hook Tongue Terminals................................................................................................32  
22– 10 AWG [0.26– 6.64 mm2]  
Tab Tongue Terminals...................................................................................................32  
22– 8 AWG [0.26– 10.5 mm2]  
Flag Ring Tongue Terminals...................................................................................33, 34  
16– 4/0 AWG [1.04– 117 mm2]  
Parallel Splices...............................................................................................................35  
22 AWG–600 MCM [0.26– 304 mm2]  
Butt Splices ..............................................................................................................36, 37  
26 AWG – 600 MCM [0.1 – 304 mm2]  
DIAMOND GRIP  
Ring Tongue Terminals...........................................................................................38, 39  
26– 10 AWG [0.1– 6.64 mm2]  
Knife Disconnect Splices..............................................................................................40  
22– 10 AWG [0.26– 6.64 mm2]  
Slotted Ring Tongue......................................................................................................40  
26– 16 AWG [0.1– 1.65 mm2]  
Rectangular Tongue Terminals ....................................................................................41  
22– 16 AWG [0.26– 1.65 mm2]  
Flanged Spade Tongue Terminals ..............................................................................41  
26– 14 AWG [0.1– 2.62 mm2]  
Spade Tongue Terminals .............................................................................................42  
26– 16 AWG [0.1– 1.65 mm2]  
Standard “B”  
Knife Disconnect Splices..............................................................................................43  
22– 8 AWG [0.26– 10.5 mm2]  
Rectangular Tongue Terminals ....................................................................................43  
22– 14 AWG [0.26– 2.62 mm2]  
Military Approvals, Part Numbers & Requirements ......................................................44– 48  
U.L. Requirements..........................................................................................................49, 50  
Application Tooling ........................................................................................................51– 56  
Part Number Index .........................................................................................................57– 59  
2
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
How to Compute Circular Mil Area of Various Wire Shapes  
Metric Dimensions  
U.S. Customary Dimensions  
Square or Rectangular Wire  
Multiply the width of the wire cross section in  
millimetres by the thickness of the wire cross  
section in millimetres by 1973.525 and sub-  
tract the radius factor shown below.  
Multiply the width of the wire cross section  
in mils by the thickness of the wire cross  
section in mils by 1.2732 and subtract the  
radius factor shown below.  
CMA = W x T x 1973.525– radius factor  
CMA = W x T x 1.2732– radius factor  
Multiply the diameter in milllimetres by itself  
by 1550.003  
CMA = D2 x 1550.003  
Round Solid Wire AWG  
Stranded Wire AWG  
Multiply the diameter in mils by itself.  
CMA = D2  
Multiply the diameter of one strand (in mils)  
by itself, and then multiply the result by the  
total number of strands.  
Multiply the diameter of one strand in mil-  
limetres by itself by the number of strands  
by 1550.003.  
CMA = D2 x N  
CMA = D2 x N x 1550.003  
Conversion Table  
Radius Factor, U.S. Customary  
Radius Factor, Metric  
To  
Radius Factor  
Radius Factor  
Radius  
Radius  
Convert  
From  
To  
Multiply By  
To Subtract  
(in.)  
To Subtract  
(mm)  
(CMA)  
(CMA)  
CMA  
CMA  
mm2  
mm2  
mm2 .0005067075  
.010  
.012  
.016  
.020  
.026  
.032  
.040  
.063  
.094  
110  
158  
0.25  
0.3  
106  
153  
in2  
in2  
.0000007854  
.001550003  
1973.525  
280  
0.35  
0.4  
208  
CMA  
438  
272  
740  
0.5  
424  
1121  
1752  
4346  
9675  
0.6  
611  
Note: Refer to table listing for circu-  
lar mil area for common wire sizes.  
0.8  
1086  
2444  
1.2  
Radius must be measured.  
Radius must be measured.  
Table of SOLISTRAND and Budget Standard Wire Ranges  
Use to select the proper size terminals or splices.  
Terminal Connector  
Size  
Terminal Connector  
Size  
CMA Range  
CMA Range  
26–22  
24–20  
22–16  
202–810  
320–1,290  
509–3,260  
2,050–5,180  
3,260–8,230  
5,180–13,100  
13,100–20,800  
20,800–33,100  
33,100–52,600  
2 & 2 HD  
1/0 & 1/0 HD  
2/0  
52,600–83,700  
83,700–119,500  
119,500–150,500  
150,500–190,000  
190,000–231,000  
231,000–300,000  
300,000–380,000  
350,000–478,000  
478,000–600,000  
16–14 & 16–14 HD  
14–12  
3/0  
4/0  
12–10  
250–300 MCM  
300–350 MCM  
400 MCM  
500–600 MCM  
8 & 8 HD  
6 & 6 HD  
4 & 4 HD  
HD-Denotes Heavy Duty Terminal.  
3
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Table listing: Circular Mil Area for common wire sizes  
Strands  
Nominal  
Wire Sizes in AWG  
and mm2 to CMA  
Note: The following tables are  
applicable to single and  
multiple strand, round,  
conductors only.  
Approximate  
Conductor Diameter  
Wire Size  
CMA  
Diameter  
No.  
2
AWG  
44  
44  
43  
42  
41  
40  
39  
38  
38  
37  
36  
35  
34  
33  
33  
32  
31  
30  
30  
29  
29  
29  
28  
28  
27  
27  
26  
26  
26  
26  
26  
26  
26  
26  
26  
26  
26  
25  
25  
25  
25  
24  
24  
24  
24  
24  
24  
24  
24  
24  
22  
22  
22  
22  
22  
22  
22  
21  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
19  
18.5  
18.5  
18.5  
18.5  
18  
18  
mm  
Inch  
0.002  
0.002  
0.0022  
0.0025  
0.0028  
0.0031  
0.0035  
0.0039  
0.004  
0.0045  
0.005  
0.0056  
0.0063  
0.0071  
0.0071  
0.008  
0.0089  
0.01  
mm  
Inch  
mm  
3.8  
4.0  
4.8  
6.3  
7.8  
0.002  
0.002  
0.002  
0.003  
0.004  
0.005  
0.006  
0.008  
0.008  
0.010  
0.013  
0.016  
0.020  
0.025  
0.026  
0.032  
0.040  
0.051  
0.053  
0.064  
0.077  
0.080  
0.089  
0.093  
0.102  
0.103  
0.121  
0.127  
0.127  
0.127  
0.128  
0.130  
0.139  
0.141  
0.146  
0.152  
0.154  
0.159  
0.159  
0.161  
0.162  
0.197  
0.201  
0.203  
0.203  
0.204  
0.205  
0.207  
0.207  
0.241  
0.321  
0.322  
0.324  
0.324  
0.329  
0.355  
0.382  
0.411  
0.503  
0.507  
0.511  
0.519  
0.519  
0.519  
0.519  
0.523  
0.563  
0.601  
0.653  
0.756  
0.766  
0.778  
0.778  
0.811  
0.815  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
26  
1
10  
1
7
19  
1
51  
6
26  
10  
8
0.00195  
0.002  
0.050  
0.051  
0.056  
0.064  
0.071  
0.079  
0.089  
0.099  
0.102  
0.114  
0.127  
0.142  
0.160  
0.180  
0.180  
0.203  
0.226  
0.254  
0.051  
0.287  
0.099  
0.320  
0.127  
0.079  
0.361  
0.051  
0.160  
0.079  
0.127  
0.142  
0.404  
0.102  
0.099  
0.160  
0.051  
0.254  
0.102  
0.450  
0.142  
0.160  
0.455  
0.500  
0.160  
0.127  
0.254  
0.180  
0.511  
0.142  
0.051  
0.127  
0.226  
0.160  
0.203  
0.643  
0.127  
0.254  
0.160  
0.724  
0.800  
0.254  
0.180  
0.203  
0.813  
0.051  
0.127  
0.160  
0.320  
0.201  
0.912  
0.371  
0.180  
0.051  
0.203  
0.254  
0.234  
0.051  
0.051  
0.056  
0.064  
0.071  
0.079  
0.089  
0.099  
0.102  
0.114  
0.127  
0.142  
0.160  
0.180  
0.180  
0.203  
0.226  
0.254  
0.305  
0.279  
0.330  
0.330  
0.381  
0.406  
0.356  
0.406  
0.457  
0.457  
0.457  
0.457  
0.406  
0.457  
0.558  
0.483  
0.559  
0.508  
0.508  
0.457  
0.508  
0.533  
0.457  
0.508  
0.584  
0.584  
0.584  
0.584  
0.508  
0.584  
0.508  
0.584  
0.737  
0.737  
0.737  
0.635  
0.838  
0.762  
0.838  
0.737  
0.813  
0.965  
0.991  
0.991  
0.813  
0.991  
0.965  
0.991  
0.991  
1.041  
0.914  
1.194  
1.194  
1.194  
1.194  
1.245  
1.245  
0.0022  
0.0025  
0.0028  
0.0031  
0.0035  
0.0039  
0.004  
9.6  
12.3  
15.2  
16.0  
20.2  
25.0  
31.4  
39.7  
50.0  
50.4  
64.0  
79.2  
100.0  
104.0  
127.7  
152.1  
158.8  
175.0  
182.6  
202  
204  
238  
250  
250  
251  
253  
256  
274  
278  
288  
300  
304  
313  
314  
318  
320  
388  
397  
400  
400  
403  
404  
408  
408  
0.0045  
0.005  
0.0056  
0.0063  
0.00707  
0.0071  
0.008  
0.0089  
0.01  
0.002  
0.0113  
0.0039  
0.0126  
0.005  
0.0031  
0.0142  
0.002  
0.0063  
0.0031  
0.005  
0.0056  
0.0159  
0.004  
0.0039  
0.0063  
0.002  
0.01  
0.004  
0.0177  
0.0056  
0.0063  
0.0179  
0.0197  
0.0063  
0.005  
Computing Circular  
Mil Area  
For best results, the proper  
AMP terminal or splice must be  
selected not by the “fit” of wire or  
wires in the terminal barrel, but  
by the total circular mil area in  
cross section of the wires used.  
For this purpose AMP has pre-  
pared convenient tables to assist  
in the calculation of circular mil  
areas. When the totals are  
known, the proper AMP terminal  
or splice can be determined  
quickly.  
0.012  
0.011  
0.013  
0.013  
0.015  
0.016  
0.014  
0.016  
0.018  
0.018  
0.018  
0.018  
0.016  
0.018  
0.022  
0.019  
0.022  
0.02  
1
16  
18  
7
72  
3
19  
1
10  
8
1
1
10  
16  
4
Unusual combinations or special  
applications should be submitted  
to AMP engineering department  
for size recommendation. In any  
application, the careful selection  
of terminals by the circular mil  
area method will insure the high-  
est possible performance, both  
electrically and mechanically, in  
your AMP terminations.  
0.02  
0.018  
0.02  
0.021  
0.018  
0.02  
0.023  
0.023  
0.023  
0.023  
0.02  
0.01  
8
1
0.0071  
0.0201  
0.0056  
0.002  
13  
102  
19  
8
16  
10  
1
26  
7
19  
1
0.023  
0.02  
Example of multiple wire  
configurations used in one  
termination  
475  
634  
635  
640  
640  
650  
700  
754  
0.005  
0.023  
0.029  
0.029  
0.029  
0.025  
0.033  
0.03  
0.0089  
0.0063  
0.008  
0.0253  
0.005  
ALWAYS SELECT TERMINALS  
BY THE CIRCULAR MIL AREA  
METHOD. For example, a No.  
18 AWG 16-strand conductor  
(1600 CMA) and a No. 16 AWG  
19-strand conductor (2426  
CMA) will have a combined total  
of 4026 CMA. This total CMA is  
equivalent to a No. 14 AWG  
conductor.  
0.01  
0.0063  
0.0285  
0.0315  
0.01  
0.0071  
0.008  
0.032  
0.002  
0.005  
0.0063  
0.0126  
0.0079  
0.0359  
0.0146  
0.0071  
0.002  
0.008  
0.01  
0.0092  
0.033  
0.029  
0.032  
0.038  
0.039  
0.039  
0.032  
0.039  
0.038  
0.039  
0.039  
0.041  
0.036  
0.047  
0.047  
0.047  
0.047  
0.049  
0.049  
812  
992  
1
1000  
1008  
1024  
1024  
1024  
1025  
1032  
1111  
1186  
1289  
1492  
1512  
1536  
1536  
1600  
1608  
10  
20  
16  
1
256  
41  
26  
7
19  
1
7
30  
384  
24  
16  
19  
4
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Table listing: Circular Mil Area for common wire sizes (Continued)  
Strands  
Wire Sizes in AWG  
and mm2 to CMA  
Note: The following tables are  
applicable to single and  
multiple strand, round,  
conductors only.  
Nominal  
Approximate  
Conductor Diameter  
Wire Size  
CMA  
Diameter  
No.  
2
AWG  
18  
18  
18  
18  
18  
18  
18  
17  
17  
17  
17  
17  
16  
16  
16  
16  
16  
16  
16  
16  
15.5  
15.5  
15.5  
15.5  
15  
14  
14  
14  
14  
14  
14  
14  
14  
14  
14  
13.5  
13.5  
13.5  
13  
12  
12  
12  
12  
12  
12  
12  
12  
12  
12  
11.5  
11.5  
11.5  
11.5  
11  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
9
mm  
Inch  
0.042  
0.04  
mm  
Inch  
0.0152  
0.0403  
0.005  
0.0063  
0.0153  
0.0159  
0.01  
mm  
1617  
1624  
1625  
1627  
1639  
1770  
1900  
1980  
1999  
2048  
2048  
2052  
2426  
2521  
2540  
2580  
2581  
2600  
2625  
2800  
2942  
2948  
3000  
3073  
3260  
3831  
3899  
4079  
4099  
4100  
4106  
4109  
4128  
4167  
4234  
4802  
4842  
4914  
5184  
6088  
6343  
6475  
6500  
6503  
6509  
6512  
6529  
6545  
6654  
6946  
7856  
7985  
8064  
8226  
9072  
9472  
10080  
10319  
10319  
10365  
10376  
10384  
10404  
10500  
10867  
11696  
11710  
11816  
12066  
13087  
13125  
14175  
14368  
15595  
15665  
0.819  
0.823  
0.823  
0.824  
0.830  
0.897  
0.963  
1.003  
1.013  
1.038  
1.038  
1.040  
1.229  
1.277  
1.287  
1.307  
1.308  
1.317  
1.330  
1.419  
1.491  
1.494  
1.520  
1.557  
1.652  
1.941  
1.976  
2.067  
2.077  
2.077  
2.081  
2.082  
2.092  
2.111  
2.145  
2.433  
2.453  
2.490  
2.627  
3.085  
3.214  
3.281  
3.294  
3.295  
3.298  
3.300  
3.308  
3.316  
3.372  
3.520  
3.981  
4.046  
4.086  
4.168  
4.597  
4.799  
5.108  
5.229  
5.229  
5.252  
5.258  
5.262  
5.272  
5.320  
5.506  
5.926  
5.933  
5.987  
6.114  
6.5  
7
0.386  
1.024  
0.127  
.0160  
0.389  
0.404  
0.254  
1.130  
0.429  
0.203  
0.051  
1.151  
0.287  
0.180  
0.320  
0.160  
1.290  
0.254  
0.127  
0.508  
0.521  
1.379  
0.254  
0.071  
1.450  
0.361  
0.599  
0.267  
0.615  
0.254  
0.373  
1.628  
0.320  
0.160  
0.180  
0.249  
0.668  
1.781  
1.829  
0.455  
0.157  
0.127  
0.254  
0.470  
0.320  
0.775  
2.052  
0.338  
0.226  
0.800  
0.851  
0.521  
0.305  
2.304  
0.914  
0.406  
2.550  
0.424  
0.320  
0.404  
0.978  
2.588  
0.594  
0.254  
1.001  
0.300  
1.039  
2.761  
0.640  
2.91  
1.067  
1.016  
1.016  
1.245  
1.067  
1.219  
1.321  
1.143  
1.194  
1.194  
1.245  
1.143  
1.549  
1.499  
1.499  
1.499  
1.295  
1.549  
1.499  
1.549  
1.499  
1.372  
1.499  
1.549  
1.448  
1.930  
1.803  
1.854  
1.930  
1.956  
1.930  
1.626  
1.905  
1.854  
1.880  
2.210  
2.007  
1.778  
1.829  
2.438  
2.413  
2.667  
2.438  
2.337  
2.388  
2.184  
2.057  
2.362  
2.388  
2.388  
2.540  
2.565  
2.591  
2.311  
2.438  
2.769  
2.540  
2.769  
2.997  
3.099  
2.438  
2.591  
2.972  
2.946  
2.997  
3.302  
3.251  
2.769  
3.200  
2.90  
1
65  
41  
7
7
19  
1
0.04  
0.049  
0.042  
0.048  
0.052  
0.045  
0.047  
0.047  
0.049  
0.045  
0.061  
0.059  
0.059  
0.059  
0.051  
0.061  
0.059  
0.061  
0.059  
0.054  
0.059  
0.061  
0.057  
0.076  
0.071  
0.073  
0.076  
0.077  
0.076  
0.064  
0.075  
0.073  
0.074  
0.087  
0.079  
0.07  
0.072  
0.096  
0.095  
0.105  
0.096  
0.092  
0.094  
0.086  
0.081  
0.093  
0.094  
0.094  
0.1  
0.101  
0.102  
0.091  
0.096  
0.109  
0.1  
0.0445  
0.0169  
0.008  
7
32  
512  
1
19  
50  
16  
65  
1
26  
105  
7
7
1
30  
392  
1
19  
7
37  
7
41  
19  
1
26  
105  
84  
50  
7
0.002  
0.0453  
0.0113  
0.0071  
0.0126  
0.0063  
0.0508  
0.01  
0.005  
0.02  
0.0205  
0.0543  
0.01  
0.0028  
0.0571  
0.0142  
0.0236  
0.0105  
0.0242  
0.01  
0.0147  
0.0641  
0.0126  
0.0063  
0.0071  
0.0098  
0.0263  
0.0701  
0.072  
1
1
19  
165  
259  
65  
19  
41  
7
0.0179  
0.0062  
0.005  
0.01  
0.0185  
0.0126  
0.0305  
0.0808  
0.0133  
0.0089  
0.0315  
0.0335  
0.0205  
0.012  
1
37  
84  
7
7
19  
56  
1
7
37  
1
37  
65  
41  
7
0.0907  
0.036  
0.016  
0.1004  
0.0167  
0.0126  
0.0159  
0.0385  
0.1019  
0.0234  
0.01  
0.0394  
0.0118  
0.0409  
0.1087  
0.0252  
0.1144  
.0050  
0.109  
0.118  
0.122  
0.096  
0.102  
0.117  
0.116  
0.118  
0.13  
0.128  
0.109  
0.126  
0.114  
0.140  
0.146  
0.145  
0.142  
0.146  
1
19  
105  
7
84  
7
1
19  
1
525  
7
19  
7
9
8
8
8
7
7
7.5  
8
0.13  
1.14  
0.70  
1.20  
3.56  
3.71  
3.68  
3.60  
.0450  
.0275  
.0472  
.0177  
8
8
50  
0.45  
3.70  
5
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Table listing: Circular Mil Area for common wire sizes (Continued)  
Strands  
Wire Sizes in AWG  
and mm2 to CMA  
Note: The following tables are  
applicable to single and  
multiple strand, round,  
conductors only.  
Nominal  
Approximate  
Conductor Diameter  
Wire Size  
CMA  
Diameter  
No.  
2
AWG  
8
8
8
8
8
8
8
7
7
7
7
7
6
6
6
6
6
6
5.5  
5.5  
5.5  
5
5
4.5  
4
4
4
4
4
3.5  
3
3
3
3
2.5  
2.5  
2
2
2
2
2
2
2
1.5  
1
1
1
0
0
0
0
0
0
00  
00  
00  
00  
000  
000  
000  
mm  
Inch  
0.167  
0.150  
0.129  
0.146  
0.148  
0.150  
0.167  
0.161  
0.165  
0.159  
0.141  
0.161  
0.174  
0.184  
0.162  
0.202  
0.210  
0.189  
0.209  
0.197  
0.177  
0.197  
0.182  
0.236  
0.204  
0.232  
0.240  
0.226  
0.272  
0.236  
0.260  
0.280  
0.253  
0.260  
0.292  
0.272  
0.257  
0.332  
0.345  
0.300  
0.307  
0.301  
0.335  
0.307  
0.382  
0.386  
0.339  
0.354  
0.406  
0.370  
0.431  
0.435  
0.394  
0.486  
0.421  
0.488  
0.488  
0.453  
0.545  
0.571  
0.571  
0.496  
0.512  
0.635  
0.630  
0.571  
0.571  
0.576  
0.576  
0.600  
0.574  
0.575  
0.630  
0.631  
0.631  
mm  
4.24  
3.81  
3.26  
3.71  
3.76  
3.81  
4.24  
4.10  
4.20  
4.05  
3.57  
4.10  
4.42  
4.67  
4.11  
5.13  
5.33  
4.80  
5.30  
5.00  
4.50  
5.00  
4.62  
6.00  
5.18  
5.89  
6.10  
5.74  
6.90  
6.00  
6.60  
7.10  
6.42  
6.60  
7.42  
6.90  
6.53  
8.43  
8.76  
7.62  
7.80  
7.65  
8.50  
7.80  
9.70  
9.80  
8.60  
9.00  
10.30  
9.40  
10.95  
11.05  
10.00  
12.34  
10.70  
12.40  
12.40  
11.50  
13.84  
14.50  
14.50  
12.60  
13.00  
16.13  
16.00  
14.50  
14.50  
14.63  
14.63  
15.24  
14.58  
14.61  
16.0  
16.03  
16.03  
Inch  
.0111  
.0211  
.1285  
.0486  
.0295  
.0184  
.0113  
.0315  
.0157  
.0531  
.1406  
.0201  
.0266  
.0612  
.1620  
.0372  
.0142  
.0630  
.0157  
.0669  
.1772  
.0295  
.1819  
.0315  
.2040  
.0772  
.0336  
.0469  
.0179  
.0787  
.0157  
.0079  
.0843  
.0244  
.0904  
.0906  
.2570  
.0590  
.0100  
.0424  
.0157  
.0602  
.0079  
.1024  
.0100  
.0100  
.0315  
.0709  
.0157  
.0118  
.0100  
.0100  
.0787  
.0100  
.0843  
.0118  
.0197  
.0906  
.0100  
.0197  
.0118  
.0992  
.1024  
.0100  
.0197  
.0799  
.1142  
.0640  
.0524  
.1443  
.1147  
.0822  
.0900  
.0701  
.0574  
mm  
0.28  
0.54  
3.26  
1.23  
0.75  
0.47  
0.29  
0.80  
0.40  
1.35  
3.57  
0.51  
0.68  
1.55  
4.11  
0.94  
16387  
16473  
16512  
16533  
16535  
16589  
16983  
18853  
19719  
19737  
19768  
19796  
26179  
26218  
26244  
26292  
26818  
27783  
31057  
31329  
31400  
32199  
33088  
40682  
41616  
41718  
41771  
41792  
42615  
43356  
48312  
48867  
49745  
50010  
57205  
57459  
66049  
66139  
66500  
66517  
68031  
68857  
69088  
73400  
81700  
83600  
84341  
95509  
97610  
98409  
104500  
106400  
117680  
133000  
135023  
139101  
139712  
155959  
167200  
184343  
185468  
186972  
199229  
210900  
235959  
236208  
247791  
249856  
249864  
249870  
249966  
250003  
299700  
299755  
299823  
8
8
8
8
8
8
8.5  
10  
133  
37  
1
7
19  
49  
133  
19  
80  
7
10  
10  
10  
10  
13  
13  
13  
15  
14  
14  
16  
16  
16  
16  
15.5  
20  
21  
21  
21  
21  
21  
22  
25  
25  
25  
25  
34  
30  
34  
34  
35  
34  
35  
35  
35  
38  
41  
42  
40  
50  
50  
50  
53  
54  
60  
67  
70  
70  
70  
80  
85  
95  
95  
95  
1
49  
37  
7
1
19  
133  
7
126  
7
1
37  
1
41  
1
7
37  
19  
133  
7
196  
783  
7
0.36  
1.60  
0.400  
1.700  
4.500  
0.750  
4.620  
0.800  
5.182  
1.961  
0.853  
1.191  
0.455  
2.000  
0.400  
0.200  
2.140  
0.620  
2.296  
2.300  
6.528  
1.499  
0.254  
1.077  
0.400  
1.530  
0.200  
2.600  
0.254  
0.254  
0.800  
1.800  
0.400  
0.300  
0.254  
0.254  
2.000  
0.254  
2.140  
0.300  
0.500  
2.300  
0.254  
0.500  
0.300  
2.520  
2.600  
0.254  
0.500  
2.030  
2.900  
1.623  
1.331  
3.665  
2.913  
2.088  
2.29  
84  
7
7
1
19  
665  
37  
276  
19  
1107  
7
817  
836  
85  
19  
396  
702  
1045  
1064  
19  
1330  
19  
999  
360  
19  
1672  
475  
1332  
19  
19  
2109  
608  
37  
19  
61  
91  
12  
19  
37  
37  
61  
91  
000  
000  
0000  
0000  
0000  
0000  
0000  
250  
250  
250  
250  
250  
100  
105  
120  
120  
125  
127  
127  
127  
127  
127  
152  
152  
152  
300  
300  
300  
1.781  
1.458  
6
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Table listing: Circular Mil Area for common wire sizes (Continued)  
Strands  
Wire Sizes in AWG  
and mm2 to CMA  
Note: The following tables are  
applicable to single and  
multiple strand, round,  
conductors only.  
Nominal  
Approximate  
Conductor Diameter  
Wire Size  
CMA  
Diameter  
No.  
2
AWG  
300  
mm  
Inch  
mm  
Inch  
.1581  
.1257  
.0757  
.0620  
.1357  
.1708  
.0973  
.1451  
.1040  
.0810  
.0663  
.1622  
.1162  
.0905  
.0741  
.0687  
.1273  
.0812  
.0992  
.0742  
.1375  
.1071  
.0877  
.1109  
.0908  
.1424  
.0768  
.1470  
.1145  
.0794  
.0938  
.0887  
.1280  
.1048  
.1644  
mm  
299947  
300209  
349560  
349804  
349875  
350072  
350290  
400026  
400192  
400221  
400008  
499868  
499590  
499605  
499664  
599401  
599596  
600003  
600279  
699216  
699531  
699695  
699907  
750227  
750262  
750277  
749096  
799533  
799725  
800654  
800658  
999197  
999424  
999457  
1000012  
152  
152  
177  
177  
177  
177  
177  
203  
203  
203  
203  
253  
253  
253  
253  
304  
304  
304  
304  
355  
355  
355  
355  
405  
405  
405  
405  
456  
456  
456  
456  
507  
507  
507  
507  
12  
19  
61  
91  
19  
12  
37  
19  
37  
61  
91  
19  
37  
61  
91  
127  
37  
91  
61  
127  
37  
61  
91  
61  
91  
37  
127  
37  
61  
127  
91  
127  
61  
91  
37  
4.016  
3.193  
1.923  
1.575  
3.447  
4.338  
2.471  
3.686  
2.642  
2.057  
1.684  
4.12  
2.951  
2.299  
1.882  
1.745  
3.233  
2.062  
2.52  
0.657  
0.629  
0.681  
0.682  
0.679  
0.710  
0.681  
0.726  
0.728  
0.729  
0.729  
0.811  
0.813  
0.815  
0.815  
0.893  
0.891  
0.893  
0.893  
0.965  
0.963  
0.964  
0.965  
0.998  
0.999  
0.997  
0.998  
1.029  
1.031  
1.032  
1.032  
1.153  
1.152  
1.153  
1.151  
14.66  
15.98  
17.3  
17.32  
17.25  
18.03  
17.3  
18.44  
18.49  
18.49  
18.49  
20.6  
300  
350  
350  
350  
350  
350  
400  
400  
400  
400  
500  
500  
500  
500  
600  
600  
600  
600  
700  
700  
700  
700  
750  
750  
750  
750  
800  
800  
800  
800  
1000  
1000  
1000  
1000  
20.65  
20.7  
20.7  
22.68  
22.63  
22.68  
22.68  
24.51  
24.46  
24.49  
24.51  
25.35  
25.37  
25.32  
25.35  
26.14  
26.19  
26.21  
26.21  
29.29  
29.26  
29.29  
29.24  
1.885  
3.493  
2.72  
2.228  
2.817  
2.306  
3.617  
1.951  
3.734  
2.908  
2.017  
2.383  
2.253  
3.251  
2.662  
4.176  
Chart 2 (Solid Wire)  
U.S. Customary Dimensions  
Metric Dimensions  
Use to convert wire size to inches of diameter and CMA. To  
read mils direct, move decimal point three places to the right.  
Use to convert wire size to millimeters of diameter and CMA.  
Dia.  
inches  
Dia.  
inches  
Dia.  
mm  
Dia.  
mm  
AWG  
CMA*  
AWG  
CMA*  
mm2  
CMA*  
mm2  
CMA*  
4/0  
3/0  
2/0  
1/0  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
.460  
.410  
.365  
.325  
.289  
.258  
.229  
.204  
.182  
.162  
.144  
.128  
.114  
.102  
.091  
.081  
.072  
.064  
.057  
.051  
.045  
.040  
212,000  
168,000  
133,000  
106,000  
83,700  
66,400  
52,600  
41,700  
33,100  
26,300  
20,800  
16,500  
13,100  
10,400  
8,230  
6,530  
5,180  
4,110  
3,260  
2,580  
2,050  
1,620  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
.036  
.032  
1,290  
1,020  
810  
642  
509  
404  
320  
254  
202  
113.1  
78.54  
63.62  
50.27  
38.48  
33.18  
28.27  
23.76  
19.64  
15.90  
12.57  
9.621  
8.042  
6.605  
5.309  
4.155  
3.142  
2.545  
2.011  
1.539  
1.131  
0.7854  
12  
10  
9
8
7
6.5  
6
5.5  
5
4.5  
4
3.5  
3.2  
2.9  
2.6  
2.3  
2
1.8  
1.6  
1.4  
1.2  
1
223,000  
155,000  
125,000  
99,200  
75,900  
65,500  
55,800  
46,900  
38,800  
31,400  
24,800  
19,000  
15,900  
13,000  
10,500  
8,200  
0.6362  
0.5027  
0.3848  
0.3318  
0.2827  
0.2376  
0.1964  
0.159  
0.1257  
0.09621  
0.08042  
0.06605  
0.05309  
0.04155  
0.03142  
0.02545  
0.02011  
0.01539  
0.01131  
0.00785  
0.9  
0.8  
0.7  
0.65  
0.6  
0.55  
0.5  
1,260  
992  
759  
655  
558  
469  
338  
314  
248  
190  
159  
130  
105  
82  
.0285  
.0253  
.0226  
.0201  
.0179  
.0159  
.0142  
.0126  
.0113  
.0100  
.0089  
.0080  
.0071  
.0063  
.0056  
.0050  
.0045  
.0040  
.0035  
.0031  
0.45  
0.4  
160  
127  
101  
0.35  
0.32  
0.29  
0.26  
0.23  
0.2  
0.18  
0.16  
0.14  
0.12  
0.1  
79.7  
63.2  
50.1  
39.8  
31.5  
25.0  
19.8  
15.7  
12.5  
9.9  
62  
50.2  
39.7  
30.4  
22.3  
15.5  
6,200  
5,020  
3,970  
3,040  
2,230  
1,550  
*Nominal CMA has been “rounded off” for ease of calculation when using multiple  
wires in one termination.  
7
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
The SOLISTRAND Terminal  
BASIC TERMINAL MATERIAL. The  
SOLISTRAND terminals and splices are  
specially designed to terminate solid and  
stranded wire, irregular shaped conduc-  
tors, and combinations of these—still  
retaining the superior performance char-  
acteristics of single-purpose terminals  
and splices. Because AMP matches the  
terminal to the tool each termination is  
uniformly perfect, making quality control  
easy and performance consistent.  
Corrosion resistance, vibration resis-  
tance and tensile strength of these termi-  
nals and splices are well within the lim-  
its of commercial and military specifica-  
tions. The SOLISTRAND line includes  
parallel and butt splices, and flag, ring,  
spade, hooked, and flanged tongue ter-  
minals in sizes from 26 AWG [0.1 mm2]  
through 600 MCM [304 mm2].  
basic terminal is constructed of fine  
grade high conductivity copper per  
ASTM B-152 and tin-plated per  
MIL-T-10727. Basic material for  
Spring Spade Tongue Terminals is  
phosphor bronze per ASTM B-103  
and tin-plated per MIL-T-10727.  
AMP’s special plating process cre-  
ates durable corrosion resistance to  
salt spray and most chemical  
fumes.  
BRAZED SEAM. The barrel is  
completely closed and seam is  
brazed for uniform metal strength  
around the entire barrel area.  
The Crimp  
The “W” Crimp is one of several time-  
proven crimp types developed by AMP.  
It is not just a “kink” in a metal barrel;  
not something pinched over electrical  
wire ends. The “W” Crimp is actually two  
longitudinal crimps applied with pre-  
cisely controlled pressure so that the  
conductor within the barrel flows togeth-  
er into the dimples or serrations of the  
terminal barrel creating one homoge-  
neous mass of metal. The two indents  
also help to center conductors within the  
barrel for uniform crimping of the barrel  
around the wire. Furthermore, the “W”  
Crimp permits the use of a shorter termi-  
nal barrel, an excellent feature for con-  
fined area termination.  
BELL MOUTH. Bell shape of barrel  
entrance makes insertion of wires  
easier.  
DIMPLES OR SERRATIONS. Inner  
surface either dimpled or serrated  
for optimum tensile strength and  
maximum electrical contact area  
after crimping.  
SOLISTRAND Terminals meet or  
exceed the requirements of  
MIL-T-7928, Type I, Class 1 and 2.  
Temperature Rating: 170°C Max.  
The “W” Crimp creates terminations of  
optimum electrical properties and is  
completely reliable, giving long service  
in punishing environments.  
AMP SOLISTRAND Terminals and Splices  
(Use SOLISTRAND Tooling)  
AMP Inc.  
Wire Size  
Listed  
File No. E13288  
LR 7189  
Certified  
22–16  
Solid or Stranded  
22–16  
Solid or Stranded  
22–16  
Solid or Stranded  
“W” Crimp  
16–14  
Solid or Stranded  
16–14  
Solid or Stranded  
16–14  
Solid or Stranded  
16–14 Heavy Duty  
Solid or Stranded  
16–14 Heavy Duty  
Stranded  
16–14 Heavy Duty  
Solid or Stranded  
14–12  
Solid or Stranded  
14–12  
Stranded  
14–12  
Solid or Stranded  
12–10  
Solid or Stranded  
12–10  
Stranded  
12–10  
Solid or Stranded  
One Solid  
Two Solid  
8 thru 600 MCM  
Solid or Stranded  
8 thru 600 MCM  
Stranded  
8 thru 600 MCM  
Solid or Stranded  
Note: 22-16 terminals and splices are stamped 22-18 in accordance with  
MIL-T-7928. Commercial wire range is 22-16.  
DANGER: Not to be used on aluminum wire — may cause equipment  
failure leading to serious injury or death.  
One Solid  
Two Stranded  
One Stranded  
8
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
The Budget Terminal  
BASIC TERMINAL MATERIAL. The  
Budget Terminals and splices are pri-  
marily the same as SOLISTRAND prod-  
ucts except for the absence of the brazed  
seam in the wire barrel. This terminal is  
ideal for applications where extreme  
vibration and tension on the wire are not  
present. These terminals and splices ful-  
fill the need for an economical and elec-  
trically superior termination through the  
use of high grade materials, long plating  
experience and a proven crimp.  
basic terminal is constructed of fine  
grade high conductivity copper per  
ASTM B-152 and tin-plated per MIL-  
T-10727. Basic material for Spring  
Spade Tongue Terminals is phos-  
phor bronze per ASTM B-103 and  
tin-plated per MIL-T-10727. AMP’s  
special plating process creates  
durable corrosion resistance to salt  
spray and most chemical fumes.  
One of the most desirable features of this  
terminal and splice is the “F” Crimp.  
This proven crimp configuration rolls the  
open seam barrel into the conductor pre-  
senting a large surface to the inside of  
the terminal barrel assuring optimum  
electrical performance.  
The Budget line includes butt splices,  
ring, rectangular, flanged spade, hooked,  
and spring spade tongue terminals in  
sizes from 26 AWG [0.1 mm2] through  
10 AWG [6.64 mm2].  
SERRATIONS. Inner surface  
serrated for optimum tensile  
strength and maximum electrical  
contact area after crimping.  
BELL MOUTH. Bell shape of barrel  
entrance makes insertion of wires  
easier.  
Temperature Rating: 170°C Max.  
AMP Budget Terminals and Splices  
(Use Budget Tooling)  
Listed  
File No. E13288  
Wire Size  
22–16  
Stranded  
22–16  
Stranded  
16–14  
Stranded  
16–14  
Stranded  
12–10  
Stranded  
12–10  
Stranded  
Note: 22-16 terminals and splices are stamped  
22-18 in accordance with MIL-T-7928.  
Commercial wire range is 22-16.  
9
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
DIAMOND GRIP Terminal  
COPPER SLEEVE. The specially  
designed copper sleeve, fitted  
over the terminal barrel, provides  
circumferential insulation support  
to the wire and allows the wire to  
be bent in any direction, without  
fraying the wire’s insulation or  
breaking the conductor.  
The DIAMOND GRIP product line of ter-  
minals and splices is designed for com-  
pletely uniform reliability under the most  
critical conditions of vibration, thermal  
shock, corrosion, tension and current  
overload. AMP’s mated tool/terminal  
concept represents a total approach to  
wire termination and takes into account  
all the factors of circuit termination.  
SERRATIONS. Serrations inside  
the barrel provide maximum contact  
and tensile strength after crimping.  
The uniformity of appearance of AMP  
terminations is repeated by their unifor-  
mity in performance— made possible  
by designing the terminal and the tool-  
ing to match precisely. This promotes  
fast and easy crimping and assures pre-  
cise crimping pressure for every wire  
size, regardless of the skill of the opera-  
tor. The result is the best circuit termina-  
tion at the lowest applied cost. And this  
is true for all terminations from first to  
last, week after week, month after month.  
BELL MOUTH. Assures  
easy wire insertion.  
BASIC TERMINAL MATERIAL.  
The basic terminal is constructed of  
fine grade high conductivity copper  
per ASTM B-152 and tin-plated per  
MIL-T-10727. AMP’s special plating  
process creates durable corrosion  
resistance to salt spray and most  
chemical fumes.  
The Crimp  
After the wire is inserted into the barrel,  
the matching dies in the AMP tool close  
over the barrel, exerting great pressure.  
This causes the wire strands to flow into  
the serrations of the terminal barrel as it  
is compressed around them, forming a  
homogenous mass of the strands and  
terminal barrel. This maximum contact  
assures optimum conductivity of the  
termination.  
“V” NOTCHES. These  
lock the wire insulation  
against vibration and  
pullout.  
Temperature Rating: 170°C Max.  
DIAMOND GRIP Terminals and Splices  
(Use DIAMOND GRIP Tooling)  
AMP  
LR 7189  
Certified  
Wire  
Listed  
Range  
22–16  
22–16  
22–16  
16–14  
Stranded  
Stranded  
16–14  
Stranded  
16–14  
Stranded  
16–14 HD  
Stranded  
16–14 HD  
12-10  
—
12–10  
Stranded  
12–10  
Stranded  
10  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Terminal Stud Hole Size  
Use to Select Proper Size Terminal  
The chart shows sizes and dimensions of various studs and the corresponding terminal stud hole sizes used with AMP devices.  
For example, with stud #5 (.125 [3.18] Diameter), use AMP device listed for #5 stud (.132 [3.35] Hole Diameter).  
Terminal stud hole sizes may easily be checked by fitting sample terminal to black circle.  
Stud Size  
Stud Size  
Typical Terminal  
Stud Hole Diameter  
Typical Terminal  
Stud Hole Diameter  
Stud Dia.  
Stud Dia.  
U.S. Cust. Metric  
U.S. Cust. Metric  
.060  
.067 .003  
0#0  
0#1  
0#2  
—
—
1.52  
1.70 0.08  
.437  
.453 .005  
.073  
1.85  
.080 .003  
2.03 0.08  
7/16"  
1/2"  
—
11.10  
11.51 0.13  
.086  
2.18  
.093 .003  
2.36 0.08  
M2  
.099  
0#3  
0#4  
0#5  
—
—
Not Available  
.500  
12.70  
.515 .005  
13.08 0.13  
2.51  
M12  
.112  
2.84  
.119 .003  
3.02 0.08  
.125  
3.18  
.132 .003  
3.35 0.08  
M3  
.625  
.656 .005  
5/8"  
3/4"  
M16  
.138  
.145 .003  
15.88  
16.66 0.13  
0#6  
0#8  
M3.5  
M4  
3.51  
3.68 0.08  
.164  
4.17  
.171 .003  
4.34 0.08  
.190  
4.83  
.197 .003  
5.00 0.08  
#10  
#12  
—
—
.750  
19.05  
.781 .005  
19.84 0.13  
—
.216  
5.49  
.223 .003  
5.66 0.08  
.242  
.250 .003  
#14  
1/4"  
—
6.15  
6.35 0.08  
.875  
22.23  
.906 .005  
23.01 0.13  
7/8"  
M22  
.250  
6.35  
.265 .005  
6.73 0.13  
M6  
.312  
.328 .005  
5/16"  
3/8"  
M8  
—
7.92  
8.33 0.13  
.375  
9.53  
.390 .005  
9.91 0.13  
1.000  
25.40  
1.031 .005  
26.19 0.13  
1"  
—
11  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals  
Wire Size Range  
AWG 26 to 16,  
CMA 202 to 3,260  
[0.1 to 1.65 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
Style  
L
Max.  
E
C
Min.  
Size  
2
W
Solistrand  
Budget  
Solistrand  
Budget  
[
]
mm  
Max.  
.329  
.256  
.121  
.140  
.020  
.035  
0
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
—
—
—
—
0-31423-0  
8.36  
6.50  
3.07  
3.56  
0.51  
0.89  
.329  
8.36  
.256  
6.50  
.121  
3.07  
.140  
3.56  
.020  
0.51  
.035  
0.89  
0-31425-0  
2-31425-2  
—
—
2
M2  
.450  
11.43  
.346  
8.79  
.211  
5.36  
.203  
5.16  
.020  
0.51  
.035  
0.89  
0-33695-0  
0-322771-0  
0-31428-0  
0-31430-0  
0-32858-0  
0-32859-0  
0-32860-0  
0-31087-0  
0-31088-0  
1320677-0  
.419  
10.64  
.346  
8.79  
.211  
5.36  
.140  
3.56  
.020  
0.51  
.031  
0.79  
.035  
0.89  
0-50334*  
—
.450  
11.43  
.346  
8.79  
.211  
5.36  
.203  
5.16  
.020  
0.51  
.035  
0.89  
4
—
—
26–22  
202–810  
[0.1–0.41]  
.450  
11.43  
.346  
8.79  
.211  
5.36  
.203  
5.16  
.020  
0.51  
.035  
0.89  
—
6
M3.5  
.544  
13.82  
.416  
10.57  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.031  
0.79  
.035  
0.89  
0-331401-0  
1-331401-1  
.544  
13.82  
.416  
10.57  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.035  
0.89  
8
10  
1
—
—
—
—
—
—
.544  
13.82  
.416  
10.57  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.035  
0.89  
.449  
11.40  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.065  
1.65  
.449  
11.40  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34103-0  
2-34103-1  
2
M2  
.446  
11.33  
.353  
8.97  
.172  
4.37  
.182  
4.62  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-322927-0  
.449  
11.40  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34104*0  
2-34104-6  
0-31089-0  
3-31089-6  
.446  
11.33  
.353  
8.97  
.172  
4.37  
.182  
4.62  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-36189-0  
2-326850-1  
4
0-36467*  
.621  
15.77  
.493  
12.52  
.312  
7.92  
.250  
6.35  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-323096-0  
2-323096-2  
0322418-0  
5
M3  
.449  
11.40  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.065  
1.65  
0-31090-0  
2-31090-1  
—
—
22–16  
509–3,260  
[0.26–1.65]  
.449  
.337  
.156  
.218  
.033  
.061  
1.55  
0-34105*0  
2-34105-2  
.065  
A
A
A
A
A
A
A
A
0-31091-0  
0-31101-0  
0-31264-0  
11.40  
8.56  
3.96  
5.54  
0.84  
1.65  
.528  
13.41  
.416  
10.57  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34194-0  
6
.574  
14.58  
.436  
11.07  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34107*0  
2-34107-2  
M3.5  
.621  
15.77  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34110*0  
2-34110-3  
0-30691*0  
1-30691-1  
.653  
16.59  
.478  
12.14  
.297  
7.54  
.344  
8.74  
.033  
0.84  
.065  
1.65  
—
—
0-32822-0  
0-30692-0  
0-31265*0  
0-32823-0  
.621  
15.77  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34111*0  
2-34111-3  
8
M4  
.574  
14.58  
.436  
11.07  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34108*0  
2-34108-2  
.653  
16.59  
.478  
12.14  
.297  
7.54  
.344  
8.74  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-323086-0  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
12  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 22 to 14,  
CMA 509 to 5,180  
[0.26 to 2.62 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
Style  
L
Max.  
E
C
Min.  
Size  
2
W
Solistrand  
Budget  
Solistrand  
Budget  
[
]
mm  
Max.  
.621  
.462  
.281  
.312  
.033  
.061  
.065  
0-34112*0  
2-34112-2  
0-30693*0  
3-30693-7  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
15.77  
11.73  
7.14  
7.92  
0.84  
1.55  
1.65  
.574  
14.58  
.436  
11.07  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34109*0  
2-34109-2  
0-31266-0  
0-32824-0  
10  
12  
.653  
16.59  
.478  
12.14  
.297  
7.54  
.344  
8.74  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-323087*0  
—
.621  
15.77  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.065  
1.65  
0-30694-0  
2-30694-1  
—
22–16  
509–3,260  
1/4  
M6  
.856  
21.74  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34113*0  
2-34113-2  
0-31172-0  
[
]
0.26–1.65  
.856  
21.74  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34114*0  
2-34114-2  
0-31173-0  
3-31173-3  
5/16  
M8  
.995  
25.27  
.727  
18.47  
.546  
13.87  
.531  
13.49  
.033  
0.84  
.065  
1.65  
—
—
0-324124-0  
0-31498-0  
0-328970-0  
0-321007- 0  
0-326854- 0  
0-32185-0  
.995  
25.27  
.727  
18.47  
.546  
13.87  
.531  
13.49  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-34115*0  
2-34115-2  
3/8  
1/2  
M12  
1.070  
27.18  
.711  
18.06  
.530  
13.46  
.713  
18.11  
.033  
0.84  
.061  
1.55  
.065  
1.65  
0-329966*0  
—
.480  
12.19  
.352  
8.94  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.089  
2.26  
—
2
M2  
.445  
11.30  
.352  
8.94  
.171  
4.34  
.180  
4.57  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-328377-0  
.480  
12.19  
.352  
8.94  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34119*0  
2-34119-1  
4
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34121*0  
2-34121-1  
0-30695-0  
6
.480  
12.19  
.352  
8.94  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34120*0  
2-34120-1  
0-32186*0  
0-321683-0  
0-30696*0  
M3.5  
.590  
14.99  
.431  
10.95  
.250  
6.35  
.312  
7.92  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-321684*0  
2-321684-1  
16–14  
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34122*0  
2-34122-1  
2,050–5,180  
[1.04–2.62]  
8
M4  
.590  
14.99  
.431  
10.95  
.250  
6.35  
.312  
7.92  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-324955*0  
2-324955-1  
0-322235- 0  
1-322235-1  
.621  
15.77  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.089  
2.26  
—
—
0-51872-5  
0-30697*0  
0-31049-0  
0-31163-0  
0-34896-0  
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34123*0  
2-34123-1  
10  
.669  
16.99  
.510  
12.95  
.250  
6.35  
.312  
7.92  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-320093-0  
2-320093-1  
.855  
21.72  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.089  
2.26  
12  
14  
—
—
—
—
.730  
18.54  
.493  
12.52  
.312  
7.92  
.468  
11.89  
.033  
0.84  
.089  
2.26  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
13  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 16 to 10,  
CMA 2,050 to 13,100  
[1.04 to 6.64 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
B
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
Style  
L
Max.  
E
Max.  
Size  
2
C
W
Solistrand  
Budget  
Solistrand  
Budget  
0-31164-0  
0-31165-0  
0-31499-0  
0-328971-0  
0-50982-0  
—
[
]
mm  
1/4  
M6  
.855  
.618  
.437  
.469  
.033  
.085  
.089  
0-34124*0  
2-34124-1  
A
A
A
A
A
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
21.72  
15.70  
11.10  
11.91  
0.84  
2.16  
2.26  
5/16  
M8  
.855  
21.72  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34125*0  
2-34125-6  
16–14  
.995  
25.27  
.727  
18.47  
.546  
13.87  
.531  
13.49  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-34126*0  
2-34126-2  
2,050–5,180  
[1.04–2.62]  
3/8  
1.070  
27.18  
.711  
18.06  
.530  
13.46  
.713  
18.11  
.033  
0.84  
.089  
2.26  
—
—
1/2  
M12  
1.184  
30.07  
.806  
20.47  
.625  
15.88  
.750  
19.05  
.033  
0.84  
.085  
2.16  
.089  
2.26  
0-50981-0  
0-321827-0  
8
M4  
.685  
17.40  
.526  
13.36  
.250  
6.35  
.312  
7.92  
.042  
1.07  
.098  
2.49  
—
—
—
—
—
.739  
18.77  
.526  
13.36  
.250  
6.35  
.421  
10.69  
.042  
1.07  
.098  
2.49  
0-34484-0  
1-34484-0  
—
10  
14–12  
3,260–8,230  
[1.65–4.17]  
.685  
17.40  
.526  
13.36  
.250  
6.35  
.312  
7.92  
.042  
1.07  
.098  
2.49  
0-321828-0  
1-321828-0  
—
1/4  
M6  
.739  
18.77  
.526  
13.36  
.250  
6.35  
.421  
10.69  
.042  
1.07  
.098  
2.49  
0-34487-0  
0-34486-0  
0-322447  
—
1.120  
28.45  
.774  
19.66  
.437  
11.10  
.687  
17.45  
.042  
1.07  
.098  
2.49  
3⁄8  
4
—
.630  
16.00  
.487  
12.37  
.219  
5.56  
.281  
7.14  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-34891-0  
0-34892-0  
0-324910-0  
0-31112-0  
0-34404*0  
0-31113-0  
0-32882-0  
0-31114*0  
0-321829-0  
0-34964-0  
0-31120-0  
0-34965-0  
0-31122*0  
0-34966-0  
0-31123-0  
.630  
16.00  
.487  
12.37  
.219  
5.56  
.281  
7.14  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-35476*0  
2-35476-1  
6
M3.5  
.729  
18.52  
.570  
14.48  
.302  
7.67  
.312  
7.92  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-324911-0  
.765  
19.43  
.575  
14.61  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-33456-0  
2-33456-1  
.708  
17.98  
.549  
13.94  
.281  
7.14  
.312  
7.92  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-322454*0  
8
M4  
.765  
19.43  
.575  
14.61  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-32994*0  
2-32994-1  
.723  
18.36  
.549  
13.94  
.281  
7.14  
.343  
8.71  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-322455-0  
2-322455-1  
12–10  
5,180–13,100  
[2.62–6.64]  
.765  
19.43  
.575  
14.61  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-33457*0  
2-33457-2  
.808  
20.52  
.618  
15.70  
.343  
8.71  
.375  
9.53  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-31805-0  
10  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-35771*0  
2-35771-1  
1.004  
25.50  
.736  
18.69  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-36451-0  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-35772*0  
2-35772-1  
1/4  
M6  
1.004  
25.50  
.736  
18.69  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-33458*0  
2-33458-3  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.042  
1.07  
.134  
3.40  
—
—
5/16  
M8  
1.004  
25.50  
.736  
18.69  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-33459*0  
2-33459-6  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
14  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 12 to 8,  
CMA 5,180 to 20,800  
[2.62 to 10.5 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
C
A
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
Style  
L
Max.  
E
Max.  
Size  
2
C
W
Solistrand  
Budget  
Solistrand  
Budget  
0-30972-0  
0-34833-0  
0-52269-1  
0-34834-0  
0-320760-0  
0-320761-0  
0-320762-0  
—
[
]
mm  
1.098  
.799  
.531  
.593  
.042  
.129  
.134  
*033220*0  
A
A
A
A
A
A
A
A
A
C
C
27.89  
20.29  
13.49  
15.06  
1.07  
3.28  
3.40  
*1-33220-23  
3/8  
1.271  
32.28  
.893  
22.68  
.625  
15.88  
.750  
19.05  
.042  
1.07  
.129  
3.28  
.134  
3.40  
03222420  
—
1.102  
27.99  
.742  
18.85  
.474  
12.04  
.715  
18.16  
.042  
1.07  
.134  
3.40  
—
1/2  
M12  
1.271  
32.28  
.893  
22.68  
.625  
15.88  
.750  
19.05  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-35135-0  
*2-35135-23  
12-10  
5,180–13,100  
[2.62-6.64]  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.042  
1.07  
.129  
3.28  
.134  
3.40  
0-320763-0  
0-320764-0  
0-320765-0  
1-320765-1  
1-320765-0  
5/8  
M16  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.042  
1.07  
.129  
3.28  
.134  
3.40  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.042  
1.07  
.129  
3.28  
.134  
3.40  
3/4  
7/8  
M22  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.042  
1.07  
.129  
3.28  
—
—
—
—
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.042  
1.07  
.129  
3.28  
1
—
.949  
24.10  
.743  
18.87  
.359  
9.12  
.406  
10.31  
.051  
1.30  
.172  
4.37  
*
0 324061*0  
—
8
M4  
.933  
23.70  
.696  
17.68  
.359  
9.12  
.469  
11.91  
.051  
1.30  
.172  
4.37  
*
0 32996*0  
—
0*33460*0  
*12-33460-2*1  
*22-33460-3*2  
.933  
.696  
.359  
.469  
.051  
.172  
C
C
C
—
—
—
—
—
—
23.70  
17.68  
9.12  
11.91  
1.30  
4.37  
10  
.949  
24.10  
.743  
18.87  
.359  
9.12  
.406  
10.31  
0.51  
1.30  
.172  
4.37  
0-31807-0  
*22-31807-2*2  
0-33461*0  
*12-33461-2*1  
*22-33461-3*2  
.933  
23.70  
.696  
17.68  
.359  
9.12  
.469  
11.91  
.051  
1.30  
.172  
4.37  
1/4  
M6  
1.168  
29.67  
.868  
22.05  
.531  
13.49  
.594  
15.09  
.051  
1.30  
.172  
4.37  
*
A
A
A
C
A
A
A
A
A
—
—
—
—
—
—
—
—
—
0 35247*0  
—
—
—
—
—
—
—
—
—
8
1.168  
29.67  
.868  
22.05  
.531  
13.49  
.594  
15.09  
.051  
1.30  
.172  
4.37  
0*33462*0  
2-33462-12  
13,100–20,800  
[6.64–10.5]  
5/16  
M8  
1.074  
27.28  
.790  
20.07  
.406  
10.31  
.562  
14.27  
.051  
1.30  
.172  
4.37  
*
0 31808*0  
.933  
23.70  
.696  
17.68  
.359  
9.12  
.469  
11.91  
.051  
1.30  
.172  
4.37  
0-55991-1  
0-55991-2  
1.168  
29.67  
.868  
22.05  
.531  
13.49  
.594  
15.09  
.051  
1.30  
.172  
4.37  
*
0 33463*0  
3/8  
1.965  
49.91  
1.337  
33.96  
1.000  
25.40  
1.250  
31.75  
.051  
1.30  
.172  
4.37  
0-36499-0  
1/2  
M12  
1.965  
49.91  
1.337  
33.96  
1.000  
25.40  
1.250  
31.75  
.051  
1.30  
.172  
4.37  
*
0 35664*0  
5/8  
M16  
1.965  
49.91  
1.337  
33.96  
1.000  
25.40  
1.250  
31.75  
.051  
1.30  
.172  
4.37  
0-35665-0  
0-35666-0  
1.965  
49.91  
1.337  
33.96  
1.000  
25.40  
1.250  
31.75  
.051  
1.30  
.172  
4.37  
3/4  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
1Requires a 69875 standard TAPETRONIC machine for application.  
2Requires a 68250-1 Heavy Duty TAPETRONIC machine for application.  
3Requires a 68250-1 Heavy Duty TAPETRONIC and 68242-2 die set for application.  
15  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 6 to 4,  
CMA 20,800 to 52,600  
[10.5 to 26.7 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
C
A
Dimensions  
Wire Size  
Stud  
[mm2]  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Size  
Style  
L
Max.  
E
C
W
Max.  
1.181  
.931  
.531  
.406  
.060  
.232  
*0-52197*-0  
0-52197-1  
C
C
C
C
C
C
C
C
A
C
C
A
A
A
A
C
A
C
A
C
A
A
C
C
30.00  
23.65  
13.49  
10.31  
1.52  
5.89  
1.181  
30.00  
.984  
24.99  
.584  
14.83  
.406  
10.31  
.060  
1.52  
.232  
5.89  
0-53106-1  
*33464*  
10  
1.246  
31.65  
.931  
23.65  
.531  
13.49  
.625  
15.88  
.060  
1.52  
.232  
5.89  
1.168  
29.67  
.931  
23.65  
.531  
13.49  
.468  
11.89  
.060  
1.52  
.232  
5.89  
*321298*  
2-321298-6  
1.246  
31.65  
.931  
23.65  
.531  
13.49  
.625  
15.88  
.060  
1.52  
.232  
5.89  
*33465*  
2-33465-1  
1/4  
M6  
1.168  
29.67  
.931  
23.65  
.531  
13.49  
.468  
11.89  
.060  
1.52  
.232  
5.89  
*321598*  
2-321598-3  
5/16  
M8  
1.246  
31.65  
.931  
23.65  
.531  
13.49  
.625  
15.88  
.060  
1.52  
.232  
5.89  
*33466*  
2-33466-3  
6
20,800–33,100  
[10.5–16.8]  
1.246  
31.65  
.931  
23.65  
.531  
13.49  
.625  
15.88  
.060  
1.52  
.232  
5.89  
*33467*  
2-33467-3  
3/8  
2.033  
51.64  
1.400  
35.56  
1.000  
25.40  
1.250  
31.75  
.060  
1.52  
.232  
5.89  
36807  
1.246  
31.65  
.931  
23.65  
.531  
13.49  
.625  
15.88  
.060  
1.52  
.232  
5.89  
7/16  
320745  
1.840  
46.74  
1.400  
35.56  
1.000  
25.40  
.875  
22.23  
.060  
1.52  
.232  
5.89  
*
320344*  
1/2  
M12  
2.033  
51.64  
1.400  
35.56  
1.000  
25.40  
1.250  
31.75  
.060  
1.52  
.232  
5.89  
36808  
36809  
36810  
2.033  
51.64  
1.400  
35.56  
1.000  
25.40  
1.250  
31.75  
.060  
1.52  
.232  
5.89  
5/8  
3⁄4  
2.033  
51.64  
1.400  
35.56  
1.000  
25.40  
1.250  
31.75  
.060  
1.52  
.232  
5.89  
1.314  
33.38  
.978  
24.84  
.516  
13.11  
.656  
16.66  
.073  
1.85  
.296  
7.52  
*
33468*  
10  
1.199  
30.45  
.946  
24.03  
.437  
11.10  
.500  
12.70  
.073  
1.85  
.280  
7.11  
33114  
1.314  
33.38  
.978  
24.84  
.516  
13.11  
.656  
16.66  
.073  
1.85  
.296  
7.52  
*
33469*  
1/4  
M6  
1.199  
30.45  
.946  
24.03  
.437  
11.10  
.500  
12.70  
.073  
1.85  
.280  
7.11  
2-31811-4  
*
1.314  
33.38  
.978  
24.84  
.516  
13.11  
.656  
16.66  
.073  
1.85  
.296  
7.52  
4
33470*  
33,100–52,600  
5/16  
M8  
[
]
16.8–26.7  
1.324  
33.63  
1.009  
25.63  
.500  
12.70  
.625  
15.88  
.073  
1.85  
.280  
7.11  
33115  
*
1.314  
33.38  
.978  
24.84  
.516  
13.11  
.656  
16.66  
.073  
1.85  
.296  
7.52  
33471*  
2.090  
53.09  
1.462  
37.13  
1.000  
25.40  
1.250  
31.75  
.073  
1.85  
.296  
7.52  
36815  
322704  
31812  
3/8  
1.902  
48.31  
1.462  
37.13  
1.000  
25.40  
.875  
22.23  
.073  
1.85  
.296  
7.52  
1.324  
33.63  
1.009  
25.63  
.500  
12.70  
.625  
15.88  
.073  
1.85  
.280  
7.11  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
semi-automatic pneumatic crimping system.  
16  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 4 to 1/0,  
CMA 33,100 to 119,500  
[16.8 to 60.6 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
B
C
D
Dimensions  
Wire Size  
Stud  
[mm2]  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Size  
Style  
L
Max.  
E
C
W
Max.  
1.314  
.978  
.516  
.656  
.073  
.296  
7/16  
A**  
A**  
B
320743  
33.38  
24.84  
13.11  
16.66  
1.85  
7.52  
2.090  
53.09  
1.462  
37.13  
1.000  
25.40  
1.250  
31.75  
.073  
1.85  
.296  
7.52  
*
35668*  
1/2  
M12  
4
1.902  
48.31  
1.462  
37.13  
1.000  
25.40  
.875  
22.23  
.073  
1.85  
.296  
7.52  
*
33,100–52,600  
[16.8–26.7]  
5/8  
327175*  
2.090  
53.09  
1.462  
37.13  
1.000  
25.40  
1.250  
31.75  
.073  
1.85  
.296  
7.52  
A**  
A**  
B
35669  
35670  
M16  
2.090  
53.09  
1.462  
37.13  
1.000  
25.40  
1.250  
31.75  
.073  
1.85  
.296  
7.52  
3/4  
10  
1.527  
38.79  
1.212  
30.78  
.531  
13.49  
.625  
15.88  
.073  
1.85  
.370  
9.40  
330301  
*320383*  
320138  
35183  
1.527  
38.79  
1.212  
30.78  
.531  
13.49  
.625  
15.88  
.073  
1.85  
.370  
9.40  
B
1/4  
M6  
1.657  
42.09  
1.212  
30.78  
.531  
13.49  
.890  
22.61  
.073  
1.85  
.370  
9.40  
D
1.657  
42.09  
1.212  
30.78  
.531  
13.49  
.890  
22.61  
.073  
1.85  
.370  
9.40  
D
5/16  
M8  
1.527  
38.79  
1.212  
30.78  
.531  
13.49  
.625  
15.88  
.073  
1.85  
.370  
9.40  
B
*322870*  
1.527  
38.79  
1.212  
30.78  
.531  
13.49  
.625  
15.88  
.073  
1.85  
.370  
9.40  
*
B
321600*  
3/8  
2
1.657  
1.212  
.531  
.890  
.073  
.370  
D
35184  
320741  
35185*  
323291  
320754  
320755  
36915  
52,600–83,700  
[26.7–42.4]  
42.09  
30.78  
13.49  
22.61  
1.85  
9.40  
1.657  
42.09  
1.212  
30.78  
.531  
13.49  
.890  
22.61  
.073  
1.85  
.370  
9.40  
7/16  
D
1.657  
1.212  
.531  
.890  
.073  
.370  
D
42.09  
30.78  
13.49  
22.61  
1.85  
9.40  
1/2  
M12  
2.516  
63.91  
1.888  
47.96  
1.125  
28.58  
1.250  
31.75  
.073  
1.85  
.370  
9.40  
D
5/8  
M16  
2.516  
63.91  
1.888  
47.96  
1.125  
28.58  
1.250  
31.75  
.073  
1.85  
.370  
9.40  
D
2.516  
63.91  
1.888  
47.96  
1.125  
28.58  
1.250  
31.75  
.073  
1.85  
.370  
9.40  
3/4  
D
1.956  
49.68  
1.529  
38.84  
.625  
15.88  
.875  
22.23  
.073  
1.85  
.444  
11.28  
C
1/4  
M6  
1.925  
48.90  
1.532  
38.91  
.625  
15.88  
.807  
20.50  
.073  
1.85  
.444  
11.28  
C
321866  
36916*  
1.956  
49.68  
1.529  
38.84  
.625  
15.88  
.875  
22.23  
.073  
1.85  
.444  
11.28  
C
5/16  
M8  
1/0  
1.925  
48.90  
1.532  
38.91  
.625  
15.88  
.807  
20.50  
.073  
1.85  
.444  
11.28  
*
C
321867*  
83,700–119,500  
[42.4–60.6]  
1.956  
1.529  
.625  
.875  
.073  
.444  
*
C
36917*  
49.68  
38.84  
15.88  
22.23  
1.85  
11.28  
3/8  
1.925  
48.90  
1.532  
38.91  
.625  
15.88  
.807  
20.50  
.073  
1.85  
.444  
11.28  
C
321868  
36918  
1.956  
49.68  
1.529  
38.84  
.625  
15.88  
.875  
22.23  
.073  
1.85  
.444  
11.28  
7/16  
C
*Part numbers are available in small quantity packages.  
** See style A art on preceding page.  
17  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 1/0 to 3/0,  
CMA 83,700 to 190,000  
[42.4 to 96.3 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
C
B
Dimensions  
Wire Size  
Stud  
[mm2]  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Size  
Style  
L
Max.  
E
C
W
Max.  
1.956  
1.529  
.625  
.875  
.073  
.444  
C
36919*  
322291  
320744  
320748  
321869  
36921  
49.68  
38.84  
15.88  
22.23  
1.85  
11.28  
1/2  
M12  
2.678  
68.02  
2.063  
52.40  
1.125  
28.58  
1.265  
32.13  
.073  
1.85  
.444  
11.28  
1/0  
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
83,700–119,500  
[42.4–60.6]  
5/8  
M16  
2.678  
68.02  
2.063  
52.40  
1.125  
28.58  
1.265  
32.13  
.073  
1.85  
.444  
11.28  
2.678  
68.02  
2.063  
52.40  
1.125  
28.58  
1.265  
32.13  
.073  
1.85  
.444  
11.28  
3/4  
1.930  
49.02  
1.550  
39.37  
.625  
15.88  
.926  
23.52  
.083  
2.11  
.504  
12.80  
1/4  
M6  
2.000  
50.80  
1.545  
39.24  
.625  
15.88  
.946  
24.03  
.083  
2.11  
.504  
12.80  
1.930  
49.02  
1.550  
39.37  
.625  
15.88  
.926  
23.52  
.083  
2.11  
.504  
12.80  
321870*  
36922  
5/16  
M8  
2.000  
50.80  
1.545  
39.24  
.625  
15.88  
.946  
24.03  
.083  
2.11  
.504  
12.80  
1.930  
49.02  
1.550  
39.37  
.625  
15.88  
.926  
23.52  
.083  
2.11  
.504  
12.80  
321871*  
36923*  
321872  
321873*  
36925*  
322391  
322224  
322225  
323868  
321874  
320266  
321875*  
36927*  
321876  
3/8  
2.000  
50.80  
1.545  
39.24  
.625  
15.88  
.946  
24.03  
.083  
2.11  
.504  
12.80  
2/0  
119,500–150,500  
1.930  
49.02  
1.550  
39.37  
.625  
15.88  
.926  
23.52  
.083  
2.11  
.504  
12.80  
[
]
60.6–76.3  
7/16  
1.930  
49.02  
1.550  
39.37  
.625  
15.88  
.926  
23.52  
.083  
2.11  
.504  
12.80  
1/2  
M12  
2.000  
50.80  
1.545  
39.24  
.625  
15.88  
.946  
24.03  
.083  
2.11  
.504  
12.80  
2.671  
67.84  
2.056  
52.22  
1.125  
28.58  
1.270  
32.26  
.083  
2.11  
.504  
12.80  
5/8  
M16  
2.671  
67.84  
2.056  
52.22  
1.125  
28.58  
1.270  
32.26  
.083  
2.11  
.504  
12.80  
2.671  
67.84  
2.056  
52.22  
1.125  
28.58  
1.270  
32.26  
.083  
2.11  
.504  
12.80  
3/4  
1/4  
2.112  
53.64  
1.622  
41.20  
.625  
15.88  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
2.112  
53.64  
1.622  
41.20  
.625  
15.88  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
5/16  
M8  
2.143  
54.43  
1.643  
41.73  
.625  
15.88  
1.082  
27.48  
.094  
2.39  
.565  
14.35  
3/0  
150,500–190,000  
[76.3–96.3]  
2.112  
53.64  
1.622  
41.20  
.625  
15.88  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
3/8  
2.143  
54.43  
1.643  
41.73  
.625  
15.88  
1.082  
27.48  
.094  
2.39  
.565  
14.35  
2.112  
53.64  
1.622  
41.20  
.625  
15.88  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
7/16  
*Part numbers are available in small quantity packages.  
18  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 3/0 to 300 MCM,  
CMA 150,500 to 300,000  
[76.3 to 152 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
B
C
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
[mm2]  
Style  
L
Max.  
E
Size  
C
W
Max.  
2.143  
1.643  
.625  
1.082  
.094  
.565  
B
B
C
B
C
B
B
B
B
B
B
B
B
B
C
C
C
B
B
B
B
B
B
01-36929*0  
0-321877*0  
0-322222-0  
01-36930-0  
0-322223-0  
12-36932-2  
0-321271-0  
01-36932-0  
0-321878*0  
0-321879-0  
0-321880*0  
01-36934*0  
0-321163-0  
036935  
54.43  
41.73  
15.88  
27.48  
2.39  
14.35  
1/2  
M12  
2.112  
53.64  
1.622  
41.20  
.625  
15.88  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
3/0  
2.699  
68.55  
2.084  
52.93  
1.125  
28.58  
1.270  
32.26  
.094  
2.39  
.565  
14.35  
150,500–190,000  
[76.3–96.3]  
5/8  
M16  
2.143  
54.43  
1.643  
41.73  
.625  
15.88  
1.082  
27.48  
.094  
2.39  
.565  
14.35  
2.699  
68.55  
2.084  
52.93  
1.125  
28.58  
1.270  
32.26  
.094  
2.39  
.565  
14.35  
3/4  
1/4  
M6  
2.206  
56.03  
1.644  
41.76  
.625  
15.88  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
5/16  
M8  
2.537  
64.44  
1.985  
50.42  
1.078  
27.38  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
2.206  
56.03  
1.644  
41.76  
.625  
15.88  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
3/8  
2.178  
55.32  
1.657  
42.09  
.625  
15.88  
1.087  
27.61  
.105  
2.67  
.635  
16.13  
2.178  
55.32  
1.657  
42.09  
.625  
15.88  
1.087  
27.61  
.105  
2.67  
.635  
16.13  
7/16  
2.178  
55.32  
1.657  
42.09  
.625  
15.88  
1.087  
27.61  
.105  
2.67  
.635  
16.13  
4/0  
190,000–231,000  
[
]
1/2  
M12  
2.206  
56.03  
1.644  
41.76  
.625  
15.88  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
96.3–117  
2.537  
64.44  
1.985  
50.42  
1.078  
27.38  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
2.206  
56.03  
1.644  
41.76  
.625  
15.88  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
5/8  
M16  
2.732  
69.39  
2.117  
53.77  
1.078  
27.38  
1.275  
32.39  
.105  
2.67  
.635  
16.13  
322227  
2.732  
69.39  
2.117  
53.77  
1.078  
27.38  
1.275  
32.39  
.105  
2.67  
.635  
16.13  
3/4  
322228  
7/8  
M22  
2.732  
69.39  
2.117  
53.77  
1.078  
27.38  
1.275  
32.39  
.105  
2.67  
.635  
16.13  
321625  
2.602  
66.09  
1.987  
50.47  
.625  
15.88  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
3/8  
322252  
2.602  
66.09  
1.987  
50.47  
.625  
15.88  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
7/16  
322253  
1/2  
2.602  
66.09  
1.987  
50.47  
.625  
15.88  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
322254  
250–300 MCM  
231,000–300,000  
[117–152]  
M12  
5/8  
M16  
2.602  
66.09  
1.987  
50.47  
.625  
15.88  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
323050  
3.259  
82.78  
2.566  
65.18  
1.203  
30.56  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
3/4  
1
323140  
3.259  
82.78  
2.566  
65.18  
1.203  
30.56  
1.435  
36.45  
.130  
3.30  
.753  
19.13  
323034  
*Part numbers are available in small quantity packages.  
19  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
300 to 600 MCM,  
CMA 300,000 — 600,000  
[152 to 304 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
B
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
[mm2]  
Style  
L
Max.  
E
Size  
C
W
Max.  
2.671  
2.056  
.625  
1.545  
.140  
.819  
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
322257  
322763  
322258  
322259  
322764  
324105  
322428  
322262  
322263  
322264  
327882  
324202  
323222  
322939  
322267  
322772  
322269  
322773  
322270  
322271  
322273  
67.84  
52.22  
15.88  
39.24  
3.56  
20.80  
3/8  
3.422  
86.92  
2.675  
67.95  
1.250  
31.75  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
2.671  
67.84  
2.056  
52.22  
.625  
15.88  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
7/16  
300–350 MCM  
300,000–380,000  
[152–193]  
2.671  
67.84  
2.056  
52.22  
.625  
15.88  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
1/2  
M12  
3.422  
86.92  
2.675  
67.95  
1.250  
31.75  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
2.671  
67.84  
2.065  
52.22  
.625  
15.88  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
5/8  
3/4  
3.422  
86.92  
2.675  
67.95  
1.250  
31.75  
1.545  
39.24  
.140  
3.56  
.819  
20.80  
2.790  
70.87  
2.175  
55.25  
.625  
15.88  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
3/8  
2.790  
70.87  
2.175  
55.25  
.625  
15.88  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
7/16  
2.790  
70.87  
2.175  
55.25  
.625  
15.88  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
1/2  
400 MCM  
380,000–478,000  
[193–242]  
M12  
3.644  
92.56  
2.795  
70.99  
1.250  
31.75  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
5/8  
M16  
2.790  
70.87  
2.175  
55.25  
.625  
15.88  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
3.644  
92.56  
2.795  
70.99  
1.250  
31.75  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
3/4  
1
3.644  
92.56  
2.795  
70.99  
1.250  
31.75  
1.749  
44.42  
.158  
4.01  
.930  
23.62  
3.187  
80.95  
2.447  
62.15  
.750  
19.05  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
3/8  
4.176  
106.07  
3.194  
81.13  
1.500  
38.10  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
3.187  
80.95  
2.447  
62.15  
.750  
19.05  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
1/2  
500–600 MCM  
478,000–600,000  
[242–304]  
M12  
4.176  
106.07  
3.194  
81.13  
1.500  
38.10  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
5/8  
M16  
3.187  
80.95  
2.447  
62.15  
.750  
19.05  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
4.176  
106.07  
3.194  
81.13  
1.500  
38.10  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
3/4  
1
4.176  
106.07  
3.194  
81.13  
1.500  
38.10  
2.015  
51.18  
.182  
4.62  
1.075  
27.31  
20  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Right Angle Ring Tongue Terminals  
Wire Size Range  
AWG 22 to 300 MCM,  
CMA 509 — 300,000  
[0.26 to 152 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Wire  
Barrel  
ID Min  
Stud  
Size  
Circular Mils  
Part Numbers  
C
Min.  
[mm2]  
W
.171  
.281  
.033  
.061  
6
10  
8
321262  
322768  
184269  
322821  
22-16  
4.34  
7.14  
.838  
1.55  
509-3,260  
[0.26-1.65]  
.187  
4.75  
.312  
7.92  
.033  
.838  
.061  
1.55  
.185  
4.70  
.343  
8.71  
.050  
1.27  
.105  
2.67  
16-14  
2,050-5,180  
[1.04-2.62]  
.192  
4.88  
.343  
8.71  
.033  
.838  
.085  
2.16  
10  
8
.432  
10.97  
.594  
15.09  
.051  
1.30  
.172  
4.37  
13,100-20,800  
[6.64-10.5]  
1/4  
35277  
.390  
.625  
.060  
.232  
1/4  
5/16  
1/4  
35678  
33466-1  
35625  
6
9.91  
15.88  
1.52  
5.89  
20,800-33,100  
[10.5-16.8]  
.390  
9.91  
.625  
15.88  
.060  
1.52  
.232  
5.89  
.375  
9.53  
.656  
16.66  
.073  
1.85  
.296  
7.52  
4
.348  
8.84  
.625  
15.88  
.073  
1.85  
.280  
7.11  
33,100-52,600  
[16.8-26.7]  
5/16  
3/8  
33115-1  
31812-1  
.348  
8.84  
.625  
15.88  
.073  
1.85  
.280  
7.11  
2
.422  
10.72  
.625  
15.88  
.073  
1.85  
.370  
9.40  
52,600-83,700  
[26.7-42.4]  
5/16  
322870-1  
.437  
.807  
.073  
.444  
1/4  
5/16  
3/8  
322905  
321867-1  
322906  
322909  
36922-1  
322912  
321874-1  
324035  
36929-1  
321272  
321265  
11.10  
20.50  
1.85  
11.28  
.531  
13.49  
.807  
20.50  
.073  
1.85  
.444  
11.28  
1/0  
83,700-119,500  
[42.4-60.6]  
.531  
13.49  
.807  
20.50  
.073  
1.85  
.444  
11.28  
.531  
13.49  
.875  
22.23  
.073  
1.85  
.444  
11.28  
1/2  
.500  
12.70  
.946  
24.03  
.083  
2.11  
.504  
12.80  
5/16  
3/8  
2/0  
119,500-150,500  
[60.6-76.3]  
.531  
13.49  
.926  
23.52  
.083  
2.11  
.504  
12.80  
.531  
13.49  
1.020  
25.91  
.094  
2.39  
.565  
14.35  
5/16  
3/8  
3/0  
.468  
11.89  
1.082  
27.48  
.094  
2.39  
.565  
14.35  
150,500-190,000  
[76.3-96.3]  
.468  
11.89  
1.062  
26.97  
.094  
2.39  
.565  
14.35  
1/2  
.750  
19.05  
1.150  
29.21  
.105  
2.67  
.635  
16.13  
5/16  
3/8  
4/0  
190,000-231,000  
[96.3-117]  
.484  
12.29  
1.140  
28.96  
.105  
2.67  
.635  
16.13  
250-300 MCM  
231,000-300,000  
[117-152]  
.863  
21.92  
1.435  
36.45  
.129  
3.28  
.753  
19.13  
1/2  
324023  
21  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Heavy Duty Ring Tongue Terminals  
Wire Size Range  
AWG 16 to 8,  
CMA 2,050 to 20,800  
[1.04 to 10.5 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
C
A
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
Style  
L
Max.  
E
Max.  
Size  
2
C
W
Solistrand  
Budget  
Solistrand  
Budget  
33728  
33729  
33716  
33717  
33718  
34967  
33646  
34968  
33195  
34969  
33647  
33648  
34829  
34830  
36199  
36200  
36201  
—
[
]
mm  
.630  
.487  
.219  
.281  
.050  
.110  
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
—
—
—
—
16.00  
12.37  
5.56  
7.14  
1.27  
2.79  
.630  
16.00  
.487  
12.37  
.219  
5.56  
.281  
7.14  
.050  
1.27  
.110  
2.79  
6
M3.5  
.723  
18.36  
.549  
13.94  
.281  
7.14  
.343  
8.71  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
322833-1  
8
M4  
.723  
18.36  
.549  
13.94  
.281  
7.14  
.343  
8.71  
.050  
1.27  
.105  
2.67  
.110  
2.79  
10-  
35432-1  
.723  
18.36  
.549  
13.94  
.281  
7.14  
.343  
8.71  
.050  
1.27  
.105  
2.67  
.110  
2.79  
10-34567*1  
12-34567-1  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.050  
1.27  
.110  
2.79  
10  
—
—
—
—
.973  
24.71  
.705  
17.91  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.110  
2.79  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.050  
1.27  
.105  
2.67  
.110  
2.79  
01-35775*1  
12-35775-1  
1/4  
M6  
.973  
24.71  
.705  
17.91  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.110  
2.79  
16–14  
—
—
2,050–5,180  
[1.04–2.62]  
.865  
21.97  
.612  
15.54  
.344  
8.74  
.500  
12.70  
.050  
1.27  
.105  
2.67  
.110  
2.79  
01-  
35776-1  
5/16  
M8  
.973  
24.71  
.705  
17.91  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.110  
2.79  
—
—
.973  
24.71  
.705  
17.91  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
322832-1  
3/8  
1.271  
32.28  
.893  
22.68  
.625  
15.88  
.750  
19.05  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
327732-1  
1.271  
32.28  
.893  
22.68  
.625  
15.88  
.750  
19.05  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
321165*1  
1/2  
M12  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.050  
1.27  
.110  
2.79  
—
—
5/8  
M16  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
320758-1  
1.896  
48.16  
1.268  
32.21  
1.000  
25.40  
1.250  
31.75  
.050  
1.27  
.105  
2.67  
.110  
2.79  
0-  
3/4  
10  
320759-1  
1.273  
32.33  
.977  
24.82  
.443  
11.25  
.587  
14.91  
.095  
2.41  
.177  
4.50  
0-  
—
—
—
—
331414-1  
.949  
24.10  
.696  
17.68  
.240  
6.10  
.500  
12.70  
.095  
2.41  
.177  
4.50  
0-  
330968-1  
—
8
1/4  
M6  
13,100–20,800  
[6.64–10.5]  
.933  
23.70  
.696  
17.68  
.250  
6.35  
.468  
11.89  
.095  
2.41  
.177  
4.50  
0-  
332042-1  
—
5/16  
M8  
1.273  
32.33  
.977  
24.82  
.443  
11.25  
.587  
14.91  
.095  
2.41  
.177  
4.50  
1-331414-1  
—
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
22  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Heavy Duty Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 6 to 1/0,  
CMA 20,800 to 119,500  
[10.5 to 60.6 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
B
C
Dimensions  
Wire Size  
Stud  
[mm2]  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Size  
Style  
L
Max.  
E
C
W
Max.  
1.184  
.931  
.370  
.500  
.095  
.232  
10  
B
2-330969-1  
330969  
30.07  
23.65  
9.40  
12.70  
2.41  
5.89  
1.184  
30.07  
.931  
23.65  
.370  
9.40  
.500  
12.70  
.095  
2.41  
.232  
5.89  
B
C
C
B
C
C
C
C
C
B
B
6
1/4  
20,800–33,100  
M6  
1.415  
35.94  
1.100  
27.94  
.454  
11.53  
.625  
15.88  
.095  
2.41  
.232  
5.89  
[
]
10.5–16.8  
331417  
1.415  
35.94  
1.100  
27.94  
.454  
11.53  
.625  
15.88  
.095  
2.41  
.232  
5.89  
3/8  
1-331417-1  
330970  
1.230  
31.24  
.977  
24.82  
.390  
9.91  
.500  
12.70  
.095  
2.41  
.296  
7.52  
1/4  
M6  
1.535  
38.99  
1.193  
30.30  
.456  
11.58  
.679  
17.25  
.095  
2.41  
.296  
7.52  
331420  
4
33,100–52,600  
[16.8–26.7]  
5/16  
M8  
1.535  
38.99  
1.193  
30.30  
.456  
11.58  
.679  
17.25  
.095  
2.41  
.296  
7.52  
1-331420-0  
1-331420-1  
1-331423-0  
1-331423-1  
1-331880-0  
1-331880-1  
1.535  
38.99  
1.193  
30.30  
.456  
11.58  
.679  
17.25  
.095  
2.41  
.296  
7.52  
3/8  
3/8  
1.745  
44.32  
1.315  
33.40  
.639  
16.23  
.855  
21.72  
.095  
2.41  
.375  
9.53  
2
52,600–83,700  
[26.7–42.4]  
1/2  
M12  
1.745  
44.32  
1.315  
33.40  
.639  
16.23  
.855  
21.72  
.095  
2.41  
.375  
9.53  
1.928  
48.97  
1.519  
38.58  
.691  
17.55  
.822  
20.88  
.095  
2.41  
.439  
11.15  
3/8  
1/0  
83,700–119,500  
[42.4–60.6]  
1/2  
M12  
1.928  
48.97  
1.519  
38.58  
.691  
17.55  
.822  
20.88  
.095  
2.41  
.439  
11.15  
23  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Rectangular Tongue Terminals  
Wire Size Range  
AWG 22 to 14,  
CMA 509 to 5,180  
[0.26 to 2.62 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
Budget  
320870  
32579  
328349  
322408  
327955  
328339  
321691  
328341  
—
[
]
mm  
2
.551  
.431  
.250  
.182  
.115  
.033  
.065  
—
—
—
M2  
14.00  
10.95  
6.35  
4.62  
2.92  
0.84  
1.65  
.529  
13.44  
.384  
9.75  
.203  
5.16  
.213  
5.41  
.140  
3.56  
.033  
0.84  
.065  
1.65  
—
.670  
17.02  
.517  
13.13  
.237  
6.02  
.237  
6.02  
.143  
3.63  
.033  
0.84  
.061  
1.55  
.065  
1.65  
328363  
323119  
—
4
.551  
14.00  
.431  
10.95  
.250  
6.35  
.182  
4.62  
.115  
2.92  
.033  
0.84  
.061  
1.55  
.065  
1.65  
.811  
20.60  
.606  
15.39  
.404  
10.26  
.237  
6.02  
.195  
4.95  
.033  
0.84  
.065  
1.65  
—
22-16  
509–3,260  
[0.26–1.65]  
6
M3.5  
.982  
24.94  
.745  
18.92  
.465  
11.81  
.302  
7.67  
.227  
5.77  
.033  
0.84  
.061  
1.55  
.065  
1.65  
328353  
323112  
328355  
330539  
.670  
17.02  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.203  
5.16  
.033  
0.84  
.061  
1.55  
.065  
1.65  
8
M4  
.982  
24.94  
.745  
18.92  
.465  
11.81  
.302  
7.67  
.227  
5.77  
.033  
0.84  
.061  
1.55  
.065  
1.65  
.748  
19.00  
.540  
13.72  
.281  
7.14  
.312  
7.92  
.203  
5.16  
.033  
0.84  
.061  
1.55  
—
.670  
.462  
.281  
.375  
.203  
.033  
.061  
.065  
323106  
10  
34525  
31821  
31691  
327951  
320814  
31813  
35278  
328342  
320818  
320820  
17.02  
11.73  
7.14  
9.53  
5.16  
0.84  
1.55  
1.65  
2-323106-1  
.546  
13.87  
.399  
10.13  
.218  
5.54  
.344  
8.74  
.142  
3.61  
.033  
0.84  
.061  
1.55  
.065  
1.65  
34459  
—
.576  
14.63  
.462  
11.73  
.281  
7.14  
.215  
5.46  
.109  
2.77  
.033  
0.84  
.089  
2.26  
4
—
—
5
M3  
.632  
16.05  
.479  
12.17  
.277  
7.04  
.277  
7.04  
.143  
3.63  
.033  
0.84  
.089  
2.26  
—
.560  
14.22  
.368  
9.35  
.187  
4.75  
.250  
6.35  
.187  
4.75  
.033  
0.84  
.085  
2.16  
.089  
2.26  
320815  
6
M3.5  
.529  
13.44  
.384  
9.75  
.203  
5.16  
.296  
7.52  
.140  
3.56  
.033  
0.84  
.085  
2.16  
.089  
2.26  
34266  
2-34266-1  
16–14  
2,050–5,180  
[1.04–2.62]  
.633  
16.08  
.493  
12.52  
.312  
7.92  
.244  
6.20  
.125  
3.18  
.033  
0.84  
.089  
2.26  
—
—
8
M4  
.982  
24.94  
.745  
18.92  
.465  
11.81  
.302  
7.67  
.227  
5.77  
.033  
0.84  
.085  
2.16  
.089  
2.26  
328356  
320819  
—
.717  
18.21  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.250  
6.35  
.033  
0.84  
.085  
2.16  
.089  
2.26  
10  
12  
.951  
24.16  
.618  
15.70  
.437  
11.10  
.375  
9.53  
.328  
8.33  
.033  
0.84  
.089  
2.26  
—
Note: Part numbers are shown as loose piece over tape mounted product.  
24  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Rectangular Tongue Terminals (Continued)  
Wire Size Range  
AWG 12 to 10,  
CMA 5,180 to 13,100  
[2.62 to 6.64 mm2]  
Material  
Terminal Body — Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
E
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
328050  
—
Budget  
327971  
327953  
33426  
[
]
mm  
Max.  
Max.  
.679  
17.25  
.526  
13.36  
.237  
6.02  
.237  
6.02  
.143  
3.63  
.042  
1.07  
.129  
3.28  
.134  
3.40  
4
5
M3  
.719  
18.26  
.566  
14.38  
.277  
7.04  
.277  
7.04  
.143  
3.63  
.042  
1.07  
.134  
3.40  
—
.631  
16.03  
.486  
12.34  
.218  
5.54  
.290  
7.37  
.140  
3.56  
.042  
1.07  
.129  
3.28  
.134  
3.40  
321499  
2-321499-1  
6
.898  
.693  
.404  
.237  
.195  
.042  
.134  
—
—
327959  
322945  
331269  
321557  
320822  
12–10  
5,180–13,100  
[2.62–6.64]  
M3.5  
22.81  
17.60  
10.26  
6.02  
4.95  
1.07  
3.40  
1.006  
25.55  
.736  
18.69  
.468  
11.89  
.296  
7.52  
.265  
6.73  
.042  
1.07  
.129  
3.28  
.134  
3.40  
322946  
—
8
M4  
.924  
23.47  
.754  
19.15  
.465  
11.81  
.302  
7.67  
.160  
4.06  
.042  
1.07  
.134  
3.40  
—
.843  
21.41  
.588  
14.94  
.320  
8.13  
.312  
7.92  
.250  
6.35  
.042  
1.07  
.129  
3.28  
.134  
3.40  
321558  
320823  
10  
1/4  
M6  
1.069  
27.15  
.736  
18.69  
.468  
11.89  
.469  
11.91  
.328  
8.33  
.042  
1.07  
.129  
3.28  
.134  
3.40  
Note: Part numbers are shown as loose piece over tape mounted product.  
25  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 10,  
CMA 202 to 13,100  
[0.1 to 6.64 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
Budget  
32501  
34247  
328395  
323834  
31634  
33765  
34518*  
31635*  
323823  
34582  
31636*  
31704  
33202*  
33221  
31705*  
35116  
31442  
31706  
—
[
]
mm  
.280  
.213  
.078  
.125  
.062  
.020  
.035  
0
4
—
—
—
—
26–22  
7.11  
5.41  
1.98  
3.18  
1.57  
0.51  
0.89  
202–810  
[0.1–0.41]  
.431  
10.95  
.346  
8.79  
.211  
5.36  
.203  
5.16  
.076  
1.93  
.020  
0.51  
.035  
0.89  
2
M2  
.504  
12.80  
.384  
9.75  
.203  
5.16  
.182  
4.62  
.115  
2.92  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-53555-1*  
2-53555-2*  
.451  
11.46  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.109  
2.77  
.033  
0.84  
.061  
1.55  
.065  
1.65  
321463  
2-321463-1  
4
.685  
17.40  
.493  
12.52  
.312  
7.92  
.375  
9.53  
.187  
4.75  
.033  
0.84  
.065  
1.65  
—
—
6
M3.5  
.530  
13.46  
.384  
9.75  
.203  
5.16  
.297  
7.54  
.141  
3.58  
.033  
0.84  
.061  
1.55  
.065  
1.65  
36195*  
2-36195-3*  
22–16  
509–3,260  
[0.26–1.65]  
.623  
15.82  
.493  
12.52  
.312  
7.92  
.250  
6.35  
.125  
3.18  
.033  
0.84  
.061  
1.55  
.065  
1.65  
323127*  
.685  
17.40  
.493  
12.52  
.312  
7.92  
.375  
9.53  
.187  
4.75  
.033  
0.84  
.061  
1.55  
.065  
1.65  
34117*  
2-34117-2*  
8
M4  
.653  
16.59  
.477  
12.12  
.296  
7.52  
.343  
8.71  
.171  
4.34  
.033  
0.84  
.065  
1.65  
—
—
.733  
18.62  
.572  
14.53  
.312  
7.92  
.344  
8.74  
.156  
3.96  
.033  
0.84  
.061  
1.55  
—
34583  
10  
.685  
17.40  
.493  
12.52  
.312  
7.92  
.375  
9.53  
.187  
4.75  
.033  
0.84  
.061  
1.55  
.065  
1.65  
34118*  
2-34118-2*  
.685  
17.40  
.493  
12.52  
.312  
7.92  
.385  
9.78  
.187  
4.75  
.033  
0.84  
.089  
2.26  
—
—
6
M3.5  
.530  
13.46  
.384  
9.75  
.203  
5.16  
.297  
7.54  
.141  
3.58  
.033  
0.84  
.085  
2.16  
.089  
2.26  
2-322996*1  
2-322996-1  
.623  
15.82  
.493  
12.52  
.312  
7.92  
.244  
6.20  
.125  
3.18  
.033  
0.84  
.085  
2.16  
.089  
2.26  
330827  
34128*  
.685  
17.40  
.493  
12.52  
.312  
7.92  
.385  
9.78  
.187  
4.75  
.033  
0.84  
.085  
2.16  
.089  
2.26  
16–14  
2,050–5,180  
[1.04–2.62]  
8
M4  
.530  
13.46  
.384  
9.75  
.203  
5.16  
.297  
7.54  
.141  
3.58  
.033  
0.84  
.085  
2.16  
.089  
2.26  
36880  
2-36880-1  
.764  
19.41  
.572  
14.53  
.312  
7.92  
.385  
9.78  
.187  
4.75  
.033  
0.84  
.085  
2.16  
.089  
2.26  
33219*  
34129*  
324521  
—
.685  
17.40  
.493  
12.52  
.312  
7.92  
.385  
9.78  
.187  
4.75  
.033  
0.84  
.085  
2.16  
.089  
2.26  
10  
.733  
18.62  
.572  
14.53  
.312  
7.92  
.344  
8.74  
.156  
3.96  
.033  
0.84  
.085  
2.16  
—
.772  
19.61  
.564  
14.33  
.296  
7.52  
.406  
10.31  
.203  
5.16  
.042  
1.07  
.134  
3.40  
—
31587  
34384  
35493  
325195  
31588*  
31589  
35494*  
6
M3.5  
.631  
16.03  
.486  
12.34  
.218  
5.54  
.282  
7.16  
.140  
3.56  
.042  
1.07  
.129  
3.28  
.134  
3.40  
322451*  
—
.772  
19.61  
.564  
14.33  
.296  
7.52  
.312  
7.92  
.203  
5.16  
.042  
1.07  
.134  
3.40  
—
12–10  
5,180–13,100  
[2.62–6.64]  
.991  
25.17  
.757  
19.23  
.468  
11.89  
.312  
7.92  
.250  
6.35  
.042  
1.07  
.129  
3.28  
.134  
3.40  
325196  
32995*  
8
M4  
.772  
19.61  
.564  
14.33  
.296  
7.52  
.406  
10.31  
.203  
5.16  
.042  
1.07  
.129  
3.28  
.134  
3.40  
.772  
19.61  
.564  
14.33  
.296  
7.52  
.406  
10.31  
.203  
5.16  
.042  
1.07  
.129  
3.28  
.134  
3.40  
33479*  
2-33479-1*  
10  
.772  
19.61  
.564  
14.33  
.296  
7.52  
.375  
9.53  
.203  
5.16  
.042  
1.07  
.129  
3.28  
.134  
3.40  
35495*  
2-35495-2*  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
26  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Short Spring Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 16,  
CMA 202 to 3,260  
[0.1 to 1.65 mm2]  
Material  
Terminal Body—Phosphor Bronze  
per ASTM B-103  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
Budget  
53000-1  
53001-1  
53002-1  
53003-1  
53004-1  
53150-2  
53005-1  
53006-1  
53266-2  
53007-1  
53267-2  
53268-2  
53235-2  
[
]
mm  
2
.455  
.341  
.206  
.171  
.109  
.020  
.034  
—
—
—
—
—
—
M2  
11.56  
8.66  
5.23  
4.34  
2.77  
0.51  
0.86  
.499  
12.67  
.354  
8.99  
.219  
5.56  
.203  
5.16  
.140  
3.56  
.020  
0.51  
.034  
0.86  
4
—
26–22  
5
M3  
.483  
12.27  
.338  
8.59  
.203  
5.16  
.250  
6.35  
.140  
3.56  
.020  
0.51  
.034  
0.86  
202–810  
[0.1–0.41]  
—
—
6
M3.5  
.483  
12.27  
.338  
8.59  
.203  
5.16  
.250  
6.35  
.140  
3.56  
.020  
0.51  
.034  
0.86  
8
M4  
.591  
15.01  
.416  
10.57  
.281  
7.14  
.375  
9.53  
.170  
4.32  
.020  
0.51  
.034  
0.86  
—
.576  
14.63  
.431  
10.95  
.250  
6.35  
.203  
5.16  
.140  
3.56  
.033  
0.84  
.061  
1.55  
.065  
1.65  
4
53175-1*  
—
5
M3  
.576  
14.63  
.431  
10.95  
.250  
6.35  
.250  
6.35  
.140  
3.56  
.033  
0.84  
.065  
1.65  
—
.576  
14.63  
.431  
10.95  
.250  
6.35  
.250  
6.35  
.140  
3.56  
.033  
0.84  
.061  
1.55  
.065  
1.65  
53120-1*  
53120-2*  
6
M3.5  
.576  
14.63  
.431  
10.95  
.250  
6.35  
.234  
5.94  
.140  
3.56  
.033  
0.84  
.061  
1.55  
.065  
1.65  
53830-1*  
53830-2*  
22–16  
509–3,260  
[0.26–1.65]  
.637  
16.18  
.462  
11.73  
.281  
7.14  
.375  
9.53  
.170  
4.32  
.033  
0.84  
.061  
1.55  
.065  
1.65  
53121-1*  
8
M4  
.637  
16.18  
.462  
11.73  
.281  
7.14  
.244  
6.20  
.170  
4.32  
.033  
0.84  
.061  
1.55  
.065  
1.65  
53831-1*  
53831-2*  
.685  
17.40  
.462  
11.73  
.281  
7.14  
.294  
7.47  
.218  
5.54  
.033  
0.84  
.061  
1.55  
.065  
1.65  
53832-1*  
53832-2*  
10  
1/4-28 UNF .810  
M6 20.57  
.524  
13.31  
.343  
8.71  
.625  
15.88  
.281  
7.14  
.033  
0.84  
.065  
1.65  
—
—
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
27  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Short Spring Spade Tongue Terminals (Continued)  
Wire Size Range  
AWG 16 to 10,  
CMA 2,050 to 13,100  
[1.04 to 6.64 mm2]  
Material  
Terminal Body—Phosphor Bronze  
per ASTM B-103  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
Budget  
53009-1  
53010-1  
53011-1  
53270-2  
53012-1  
53271-2  
53032-1  
53013-1  
53014-1  
53015-1  
53273-2  
53016-1  
53274-2  
53226-2  
[
]
mm  
5
.576  
.431  
.250  
.250  
.140  
.033  
.085  
.089  
53177-1*  
M3  
14.63  
10.95  
6.35  
6.35  
3.56  
0.84  
2.16  
2.26  
6
M3.5  
.576  
14.63  
.431  
10.95  
.250  
6.35  
.250  
6.35  
.140  
3.56  
.033  
0.84  
.085  
2.16  
.089  
2.26  
53123-1*  
53123-2*  
.637  
16.18  
.462  
11.73  
.281  
7.14  
.375  
9.53  
.170  
4.32  
.033  
0.84  
.085  
2.16  
.089  
2.26  
53124-1*  
53124-2*  
16–14  
8
M4  
2,050–5,180  
[
]
.637  
16.18  
.462  
11.73  
.281  
7.14  
.244  
6.20  
.170  
4.32  
.033  
0.84  
.085  
2.16  
.089  
2.26  
53833-1*  
53833-2*  
1.04–2.62  
.685  
17.40  
.462  
11.73  
.281  
7.14  
.406  
10.31  
.218  
5.54  
.033  
0.84  
.085  
2.16  
.089  
2.26  
53125-1*  
53125-2*  
10  
.685  
17.40  
.462  
11.73  
.281  
7.14  
.294  
7.47  
.218  
5.54  
.033  
0.84  
.085  
2.16  
.089  
2.26  
53834-1*  
53834-2*  
1/4-28 UNF .810  
.524  
13.31  
.343  
8.71  
.625  
15.88  
.281  
7.14  
.033  
0.84  
.089  
2.26  
—
—
—
—
M6  
20.57  
5
M3  
.636  
16.15  
.447  
11.35  
.169  
4.29  
.250  
6.35  
.184  
4.67  
.042  
1.07  
.134  
3.40  
6
M3.5  
.636  
16.15  
.452  
11.48  
.174  
4.42  
.250  
6.35  
.179  
4.55  
.042  
1.07  
.129  
3.28  
.134  
3.40  
53126-1*  
53126-2*  
.729  
18.52  
.554  
14.07  
.276  
7.01  
.375  
9.53  
.170  
4.32  
.042  
1.07  
.129  
3.28  
.134  
3.40  
53127-1*  
53127-2*  
8
M4  
12–10  
5,180–13,100  
[2.62–6.64]  
.729  
18.52  
.554  
14.07  
.276  
7.01  
.312  
7.92  
.170  
4.32  
.042  
1.07  
.129  
3.28  
.134  
3.40  
53835-1*  
53835-2*  
.777  
19.74  
.554  
14.07  
.276  
7.01  
.406  
10.31  
.218  
5.54  
.042  
1.07  
.129  
3.28  
.134  
3.40  
53128-1*  
53128-2*  
10  
.777  
19.74  
.554  
14.07  
.276  
7.01  
.312  
7.92  
.218  
5.54  
.042  
1.07  
.129  
3.28  
.134  
3.40  
53836-1*  
53836-2*  
1/4-28 UNF .902  
M6 22.91  
.616  
15.65  
.338  
8.59  
.375  
9.53  
.281  
7.14  
.042  
1.07  
—
.134  
3.40  
—
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
28  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Long Spring Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 10,  
CMA 202 to 13,100  
[0.1 to 6.64 mm2]  
Material  
Terminal Body—Phosphor Bronze  
per ASTM B-103  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Size  
2
W
X
Solistrand  
Budget  
Solistrand  
Budget  
52733-1  
52734-1  
52735-1  
53047-1  
52700-1  
52701-1  
52702-1  
53111-2  
52703-1  
[
]
mm  
.637  
.341  
.206  
.203  
.276  
.020  
.034  
4
—
—
—
—
—
—
16.18  
8.66  
5.23  
5.16  
7.01  
0.51  
0.86  
26–22  
202–810  
0.1–0.41  
6
M3.5  
.666  
16.92  
.370  
9.40  
.235  
5.97  
.250  
6.35  
.276  
7.01  
.020  
0.51  
.034  
0.86  
[
]
8
M4  
.696  
17.68  
.400  
10.16  
.265  
6.73  
.281  
7.14  
.290  
7.37  
.020  
0.51  
.034  
0.86  
—
.673  
17.09  
.392  
9.96  
.201  
5.11  
.203  
5.16  
.276  
7.01  
.033  
0.84  
.065  
1.65  
4
—
6
M3.5  
.709  
18.01  
.429  
10.90  
.238  
6.05  
.250  
6.35  
.276  
7.01  
.033  
0.84  
.061  
1.55  
.065  
1.65  
52709-1*  
22–16  
8
M4  
.756  
19.20  
.461  
11.71  
.270  
6.86  
.281  
7.14  
.290  
7.37  
.033  
0.84  
.061  
1.55  
.065  
1.65  
52710-1*  
52710-2*  
509–3,260  
[
]
0.26–1.65  
.782  
19.86  
.474  
12.04  
.283  
7.19  
.343  
8.71  
.303  
7.70  
.033  
0.84  
.065  
1.65  
10  
—
—
—
—
1/4-28 UNF .879  
.536  
13.61  
.340  
8.64  
.437  
11.10  
.333  
8.46  
.033  
0.84  
.065  
1.65  
M6  
22.33  
6
M3.5  
.709  
18.01  
.429  
10.90  
.238  
6.05  
.250  
6.35  
.276  
7.01  
.033  
0.84  
.085  
2.16  
.089  
2.26  
52712-1*  
8
.756  
.461  
.270  
.281  
.290  
.033  
.085  
.089  
52713-1*  
52713-2*  
52704-1  
52704-3  
16–14  
2,050–5,180  
[1.04–2.62]  
M4  
19.20  
11.71  
6.86  
7.14  
7.37  
0.84  
2.16  
2.26  
.782  
19.86  
.474  
12.04  
.283  
7.19  
.343  
8.71  
.303  
7.70  
.033  
0.84  
.085  
2.16  
.089  
2.26  
10  
52714-1*  
—
52705-1  
53033-1  
52706-1  
1/4-28 UNF .879  
.536  
13.61  
.345  
8.76  
.437  
11.10  
.338  
8.59  
.033  
0.84  
.089  
2.26  
—
M6  
22.33  
6
M3.5  
.808  
20.52  
.520  
13.21  
.242  
6.15  
.312  
7.92  
.283  
7.19  
.042  
1.07  
.129  
3.28  
.134  
3.40  
*
52715-1  
8
.851  
.551  
.273  
.375  
.295  
.042  
.129  
.134  
52716-1*  
52716-2*  
52707-1  
52707-3  
12–10  
5,180–13,100  
[2.62–6.64]  
M4  
21.62  
14.00  
6.93  
9.53  
7.49  
1.07  
3.28  
3.40  
.896  
22.76  
.583  
14.81  
.305  
7.75  
.375  
9.53  
.308  
7.82  
.042  
1.07  
.129  
3.28  
.134  
3.40  
52717-1*  
52717-2*  
10  
52708-1  
52772-1  
1/4-28 UNF .966  
M6 24.54  
.623  
15.82  
.345  
8.76  
.437  
11.10  
.338  
8.59  
.042  
1.07  
.134  
3.40  
—
—
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
29  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Flanged Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 10,  
CMA 202 to 13,100  
[0.1 to 6.64 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand Budget  
Part Numbers  
Circular Mils  
L
Max.  
E
Max.  
C
H
Min.  
Size  
2
W
X
Solistrand  
Budget  
[
]
mm  
Min.  
2
.453  
.338  
.203  
.182  
.110  
.026  
.020  
.035  
1
324599-1  
—
—
—
M2  
11.51  
8.59  
5.16  
4.62  
2.79  
0.66  
0.51  
0.89  
26–22  
202–810  
[0.1–0.41]  
.453  
11.51  
.338  
8.59  
.203  
5.16  
.193  
4.90  
.110  
2.79  
.026  
0.66  
.020  
0.51  
.035  
0.89  
1-  
1-  
1
4
52512-1  
51875-1  
—
6
M3.5  
.453  
11.51  
.338  
8.59  
.203  
5.16  
.250  
6.35  
.110  
2.79  
.026  
0.66  
.020  
0.51  
.035  
0.89  
—
—
2-  
2
M2  
.504  
12.80  
.384  
9.75  
.203  
5.16  
.182  
4.62  
.115  
2.92  
.041  
1.04  
.033  
0.84  
.061  
1.55  
.065  
1.65  
324605*1 324604-1  
.514  
13.06  
.384  
9.75  
.203  
5.16  
.296  
7.52  
.125  
3.18  
.045  
1.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-320749*1 1-  
32418-1  
2-320749-2  
6
M3.5  
.514  
.384  
.203  
.250  
.125  
.045  
.033  
.061  
.065  
2-323136*1  
2-323136-1  
1
322776-1  
1-  
22–16  
509–3,260  
[0.26–1.65]  
13.06  
9.75  
5.16  
6.35  
3.18  
1.14  
0.84  
1.55  
1.65  
.607  
15.42  
.431  
10.95  
.250  
6.35  
.416  
10.57  
.171  
4.34  
.062  
1.57  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-  
323124*1  
32494-1  
8
M4  
.514  
13.06  
.384  
9.75  
.203  
5.16  
.296  
7.52  
.125  
3.18  
.045  
1.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-52730*1 1-32418-2  
2-52730-1 1-32418-4  
.514  
.384  
.203  
.296  
.125  
.045  
.033  
.065  
1
10  
328522-1  
320852-1  
320853-1  
320854-1  
324579-1  
—
—
13.06  
9.75  
5.16  
7.52  
3.18  
1.14  
0.84  
1.65  
6
M3.5  
.514  
13.06  
.384  
9.75  
.203  
5.16  
.294  
7.47  
.125  
3.18  
.047  
1.19  
.033  
0.84  
.085  
2.16  
.089  
2.26  
2-320855*1  
2-320855-1  
1
1
1
1
16–14  
2,050–5,180  
[1.04–2.62]  
8
M4  
.514  
13.06  
.384  
9.75  
.203  
5.16  
.294  
7.47  
.125  
3.18  
.047  
1.19  
.033  
0.84  
.085  
2.16  
.089  
2.26  
2-320856*1  
2-320856-1  
.514  
13.06  
.384  
9.75  
.203  
5.16  
.294  
7.47  
.125  
3.18  
.047  
1.19  
.033  
0.84  
.085  
2.16  
.089  
2.26  
2-320857*1  
2-320857-1  
10  
6
M3.5  
.694  
17.63  
.518  
13.16  
.250  
6.35  
.296  
7.52  
.171  
4.34  
.052  
1.32  
.042  
1.07  
.129  
3.28  
.134  
3.40  
2-324578-0  
1-324578-0  
12-10  
5,180–13,100  
[2.62–6.64]  
8
.694  
.518  
.250  
.416  
.171  
.052  
.042  
.129  
.134  
2-  
1-  
323143-0  
32416-1  
M4  
17.63  
13.16  
6.35  
10.57  
4.34  
1.32  
1.07  
3.28  
3.40  
.694  
17.63  
.518  
13.16  
.250  
6.35  
.416  
10.57  
.171  
4.34  
.052  
1.32  
.042  
1.07  
.129  
3.28  
.134  
3.40  
2-323144-0  
2-323144-1  
1
10  
322725-1  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
30  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Slotted Ring Tongue Terminals  
Wire Size Range  
AWG 26 to 10,  
CMA 202 to 13,100  
[0.1 to 6.64 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
C
Min.  
Size  
2
W
Solistrand  
Budget  
Solistrand  
Budget  
[
]
mm  
Max.  
26–22  
6
M3.5  
.523  
13.28  
.416  
10.57  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.035  
0.89  
202–810  
—
—
322211-0  
[
]
0.1–0.41  
.425  
.353  
.172  
.182  
.033  
.061  
.065  
2-  
4
321288*0  
323838-0  
323835-0  
36953-0  
323832-0  
323837-0  
35555-0  
34520-0  
328872-0  
36216-0  
10.80  
8.97  
4.37  
4.62  
0.84  
1.55  
1.65  
6
M3.5  
.423  
10.74  
.337  
8.56  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-321289-0  
2-321289-1  
22–16  
509–3,260  
[0.26–1.65]  
.547  
13.89  
.431  
10.95  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-  
8
323129-0  
.588  
14.94  
.462  
11.73  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.065  
1.65  
10  
1/4  
—
—
.816  
20.73  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.061  
1.55  
.065  
1.65  
2-321809-0  
2-321809-1  
6
M3.5  
.459  
11.66  
.352  
8.94  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.085  
2.16  
.089  
2.26  
2-  
322514-0  
8
M4  
.616  
15.65  
.462  
11.73  
.281  
7.14  
.344  
8.74  
.033  
0.84  
.089  
2.26  
—
—
—
—
—
—
16–14  
2,050–5,180  
[
]
.604  
15.34  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.089  
2.26  
1.04–2.62  
10  
1/4  
M6  
.816  
20.73  
.618  
15.70  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.089  
2.26  
21-  
12–10  
5,180–13,100  
1/4  
M6  
.952  
24.18  
.736  
18.69  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.129  
3.28  
.134  
3.40  
35680*0  
55812-2  
[
]
2.62–6.64  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
31  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Hook Tongue Terminals  
Wire Size Range  
AWG 22 to 10,  
CMA 509 to 13,100  
[0.26 to 6.64 mm2]  
Material  
Terminal Body— Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Part Numbers  
Circular Mils  
L
Max.  
E
C
Min.  
Size  
2
W
Solistrand  
Budget  
Solistrand  
Budget  
34261  
31628  
35212  
32503  
33437  
327902  
327905  
[
]
mm  
Max.  
6
.530  
.384  
.203  
.281  
.033  
.065  
—
—
—
—
—
—
—
—
—
—
22–16  
M3.5  
13.46  
9.75  
5.16  
7.14  
0.84  
1.65  
509–3,260  
[0.26–1.65]  
8
M4  
.656  
16.66  
.482  
12.24  
.296  
7.52  
.343  
8.71  
.033  
0.84  
.065  
1.65  
6
M3.5  
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.089  
2.26  
16–14  
8
M4  
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.089  
2.26  
2,050–5,180  
[
]
1.04–2.62  
.636  
16.15  
.462  
11.73  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.089  
2.26  
10  
10  
.760  
19.30  
.570  
14.48  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.129  
3.28  
.134  
3.40  
2-324209-0  
2-324209-1  
12–10  
5,180–13,100  
[2.62–6.64]  
1/4  
M6  
1.004  
25.50  
.736  
18.69  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.129  
3.28  
.134  
3.40  
2-321632-0  
2-321632-1  
Note: Part numbers are shown as loose piece over tape mounted product.  
Tab Tongue Terminals  
Wire Size Range  
AWG 22 to 8,  
CMA 509 to 20,800  
[0.26 to 10.5 mm2]  
Material  
Terminal Body— Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
B
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Style  
L
Max.  
E
Max.  
2
W
[
]
mm  
22–16  
.681  
.500  
.125  
.033  
.061  
509–3,260  
[0.26–1.65]  
A
B
B
B
323135  
322441  
322443  
322445  
17.30  
12.70  
3.18  
0.84  
1.55  
16–14 HD1  
2,050–5,180  
[1.04–2.62]  
.863  
21.92  
.615  
15.62  
.125  
3.18  
.050  
1.27  
.105  
2.67  
12–10  
5,180–13,100  
[2.62–6.64]  
.863  
21.92  
.613  
15.57  
.125  
3.18  
.042  
1.07  
.129  
3.28  
8
.937  
23.80  
.625  
15.88  
.221  
5.61  
.051  
1.30  
.177  
4.50  
13,100–20,800  
[6.64–10.5]  
1Heavy Duty for extra mechanical strength.  
32  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Flag Ring Tongue Terminals  
Wire Size Range  
AWG 16 to 2,  
CMA 2,050 to 83,700  
[1.04 to 42.4 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
B
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Stud  
Size  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Style  
L
Max.  
C
Min.  
2
W
[
]
mm  
8
.579  
.250  
.312  
.033  
.085  
16–14  
A
A
A
A
A
A
B
B
B
A
A
B
B
A
A
B
B
B
B
B
B
B
325069*1  
322819*1  
36269*1  
M4  
14.71  
6.35  
7.92  
0.84  
2.16  
2,050–5,180  
[1.04–2.62]  
.579  
14.71  
.250  
6.35  
.312  
7.92  
.033  
.084  
.085  
2.16  
10  
6
M3.5  
.702  
17.83  
.281  
7.14  
.375  
9.53  
.042  
1.07  
.129  
3.28  
8
M4  
.702  
17.83  
.281  
7.14  
.375  
9.53  
.042  
1.07  
.129  
3.28  
36270*1  
12–10  
5,180–13,100  
[2.62–6.64]  
.702  
17.83  
.281  
7.14  
.375  
9.53  
.042  
1.07  
.129  
3.28  
10  
36271*1  
1/4  
M6  
.702  
17.83  
.281  
7.14  
.375  
9.53  
.042  
1.07  
.129  
3.28  
36272*1  
.791  
20.09  
.250  
6.35  
.500  
12.70  
.043  
1.09  
.180  
4.57  
321051*1  
321441*1  
322727*1  
323196*1  
321576*1  
321056*1  
322204*1  
321059*1  
321275*1  
321060*1  
321121*1  
321063*1  
321201*1  
321064*1  
321253*1  
184147-1  
10  
8
.918  
23.32  
.378  
9.60  
.500  
12.70  
.043  
1.09  
.180  
4.57  
13,100–20,800  
[6.64–10.5]  
1/4  
M6  
1.130  
28.70  
.525  
13.34  
.609  
15.47  
.043  
1.09  
.180  
4.57  
.841  
21.36  
.250  
6.35  
.500  
12.70  
.048  
1.22  
.224  
5.69  
10  
1/4  
M6  
.960  
24.38  
.371  
9.42  
.500  
12.70  
.048  
1.22  
.224  
5.69  
6
20,800–33,100  
[10.5–16.8]  
5/16  
M8  
1.200  
30.48  
.528  
13.41  
.625  
15.88  
.048  
1.22  
.224  
5.69  
1.200  
30.48  
.528  
13.41  
.625  
15.88  
.048  
1.22  
.224  
5.69  
3/8  
10  
1.048  
26.62  
.368  
9.35  
.546  
13.87  
.051  
1.30  
.280  
7.11  
1/4  
M6  
1.048  
26.62  
.368  
9.35  
.546  
13.87  
.051  
1.30  
.280  
7.11  
4
33,100–52,600  
[16.8–26.7]  
5/16  
M8  
1.278  
32.46  
.530  
13.46  
.682  
17.32  
.051  
1.30  
.280  
7.11  
1.278  
32.46  
.530  
13.46  
.682  
17.32  
.051  
1.30  
.280  
7.11  
3/8  
10  
1.437  
36.50  
.534  
13.56  
.713  
18.11  
.060  
1.52  
.357  
9.07  
1/4  
M6  
1.437  
36.50  
.534  
13.56  
.713  
18.11  
.060  
1.52  
.357  
9.07  
2
5/16  
M8  
1.437  
36.50  
.534  
13.56  
.713  
18.11  
.060  
1.52  
.357  
9.07  
52,600–83,700  
[26.7–42.4]  
1.437  
36.50  
.534  
13.56  
.713  
18.11  
.060  
1.52  
.357  
9.07  
3/8  
1.437  
36.50  
.534  
13.56  
.713  
18.11  
.060  
1.52  
.357  
9.07  
10 mm  
*Part numbers are available in small quantity packages.  
33  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Flag Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 1/0 to 4/0,  
CMA 83,700 to 231,000  
[42.4 to 117 mm2]  
Material  
Terminal Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Stud  
Size  
Wire Barrel I.D. Min.  
Solistrand  
Part Numbers  
Solistrand  
Circular Mils  
Style  
L
Max.  
C
Min.  
2
W
[
]
mm  
1/4  
M6  
1.733  
.666  
.875  
.073  
.444  
A
A
A
A
A
A
322215-1  
321580-1  
321066-1  
321123-1  
321582-1  
321584-1  
44.02  
16.92  
22.23  
1.85  
11.28  
5/16  
M8  
1.733  
44.02  
.666  
16.92  
.875  
22.23  
.073  
1.85  
.444  
11.28  
1/0  
83,700–119,500  
[
]
1.733  
44.02  
.666  
16.92  
.875  
22.23  
.073  
1.85  
.444  
11.28  
42.4–60.6  
3/8  
1/2  
M12  
1.733  
44.02  
.666  
16.92  
.875  
22.23  
.073  
1.85  
.444  
11.28  
5/16  
M8  
1.848  
46.94  
.671  
17.04  
.920  
23.37  
.083  
2.11  
.504  
12.80  
2/0  
119,500–150,500  
[60.6–76.3]  
1.848  
46.94  
.671  
17.04  
.920  
23.37  
.083  
2.11  
.504  
12.80  
3/8  
3/0  
2.001  
50.83  
.676  
17.17  
1.056  
26.82  
.094  
2.39  
.565  
14.35  
150,500–190,000  
[76.3–96.3]  
3/8  
A
327887-1  
5/16  
M8  
2.131  
.681  
1.115  
.105  
.635  
A
A
A
321277-1  
321277-1  
321259-1  
54.13  
17.30  
28.32  
2.67  
16.13  
4/0  
2.131  
54.13  
.681  
17.30  
1.115  
28.32  
.105  
2.67  
.635  
16.13  
190,000-231,000  
3/8  
[
]
96.3–117  
1/2  
M12  
2.131  
54.13  
.681  
17.30  
1.115  
28.32  
.105  
2.67  
.635  
16.13  
34  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Parallel Splices  
Wire Size Range  
AWG 22 to 600 MCM,  
CMA 509 to 600,000  
[0.26 to 304 mm2]  
Material  
Splice Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Part Numbers  
Solistrand  
Circular Mils1  
L
Max.  
I.D.  
Min.  
O.D.  
Max.  
2
[
]
mm  
22–16  
.301  
.061  
.141  
.033  
34130*  
34137*  
509–3,260  
[0.26–1.65]  
7.65  
1.55  
3.58  
0.84  
16–14  
2,050–5,180  
[1.04–2.62]  
.301  
7.65  
.085  
2.16  
.165  
4.19  
.033  
0.84  
12–10  
.343  
.129  
.226  
.042  
5,180–13,100  
[2.62–6.64]  
34138*  
34318*  
34319*  
8.71  
3.28  
5.74  
1.07  
8
.375  
9.53  
.172  
4.37  
.296  
7.52  
.051  
1.30  
13,100–20,800  
[6.64–10.5]  
6
.437  
11.10  
.232  
5.89  
.369  
9.37  
.060  
1.52  
20,800–33,100  
[
]
10.5–16.8  
4
.531  
13.49  
.296  
7.52  
.463  
11.76  
.073  
1.85  
33,100–52,600  
34320*  
35187*  
[
]
16.8–26.7  
2
.640  
16.26  
.370  
9.40  
.539  
13.69  
.073  
1.85  
52,600–83,700  
[
]
26.7–42.4  
1/0  
.734  
.444  
.613  
.073  
36946*  
36948*  
36909*  
83,700–119,500  
18.64  
11.28  
15.57  
1.85  
[
]
42.4–60.6  
2/0  
.734  
18.64  
.504  
12.80  
.703  
17.86  
.083  
2.11  
119,500–150,500  
[
]
60.6–76.3  
3/0  
150,500–190,000  
.749  
19.02  
.565  
14.35  
.775  
19.69  
.094  
2.39  
[
]
76.3–96.3  
4/0  
190,000–231,000  
.765  
19.43  
.635  
16.13  
.869  
22.07  
.105  
2.67  
36951*  
322275*  
322276*  
322277*  
322278*  
[
]
96.3–117  
250–300 MCM  
1.062  
26.97  
.753  
19.13  
1.054  
26.77  
.130  
3.30  
231,000–300,000  
[
]
117–152  
300–350 MCM  
1.124  
28.55  
.819  
20.80  
1.137  
28.88  
.140  
3.56  
300,000–380,000  
[
]
152–193  
400 MCM  
1.249  
31.72  
.925  
23.50  
1.287  
32.69  
.158  
4.01  
380,000–478,000  
[
]
193–242  
500–600 MCM  
1.421  
36.09  
1.070  
27.18  
1.483  
37.67  
.182  
4.62  
478,000–600,000  
[
]
242–304  
*Part numbers are available in small quantity packages.  
1When terminating two or more wires in a parallel splice, the combined cross sectional area must be within the listed circular mil area range (CMA).  
35  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Butt Splices  
Wire Size Range  
AWG 26 to 2,  
CMA 202 to 83,700  
[0.1 to 42.4 mm2]  
Material  
Splice Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
Standard  
Sight Hole  
Strap  
Solistrand  
Budget  
Dimensions  
Wire Size  
Material  
Thickness  
Max.  
Dimensions  
Part Numbers  
Circular Mils1  
[mm2]  
Style  
L
Max.  
I.D.  
Min.  
O.D.  
Max.  
L
Max.  
I.D.  
Min.  
O.D.  
Max.  
Solistrand  
Budget  
26–22  
1
.385  
.031  
.082  
.385  
.034  
.077  
.020  
-0  
202–810  
[0.1–0.41]  
Strap  
Strap  
321198*1  
321024  
9.78  
0.79  
2.08  
9.78  
0.86  
1.96  
0.51  
24–20  
320–1,290  
[0.16–0.65]  
--  
.490  
12.45  
.043  
1.09  
.105  
2.67  
.025  
0.64  
324001*1  
—
—
—
—
.591  
.061  
.141  
.591  
.065  
.136  
.033  
2-321801-3  
2-321801-4  
Strap  
21-32463-0  
21-34226*0  
—
15.01  
1.55  
3.58  
15.01  
1.65  
3.45  
0.84  
22–16  
509–3,260  
[0.26–1.65]  
.578  
14.68  
.061  
1.55  
.141  
3.58  
.578  
14.68  
.065  
1.65  
.136  
3.45  
.033  
0.84  
2131818*1  
-2-31818-1  
Standard  
Sight  
Hole  
.578  
14.68  
.061  
1.55  
.141  
3.58  
.033  
0.84  
1
—
—
—
330367*1  
.591  
.085  
.165  
.591  
.089  
.160  
.033  
1
Strap  
Standard  
Strap  
322459-1 21-32464-0  
15.01  
2.16  
4.19  
15.01  
2.26  
4.06  
0.84  
.567  
14.40  
.085  
2.16  
.165  
4.19  
.567  
14.40  
.089  
2.26  
.160  
4.06  
.033  
0.84  
2131819*1  
21-34227*0  
2-31819-1  
16–14  
2,050–5,180  
[1.04–2.62]  
.591  
15.01  
.085  
2.16  
.165  
4.19  
.033  
0.84  
1327025*1  
—
—
—
—
—
—
—
(No Wire Stop)  
Sight  
Hole  
.567  
14.40  
.085  
2.16  
.165  
4.19  
.033  
0.84  
1
330368*1  
321280-1  
—
—
14–12  
3,260–8,230  
[1.65–4.17]  
1
Sight  
Hole  
.690  
17.53  
.098  
2.49  
.178  
4.52  
.033  
0.84  
—
—
—
.703  
.134  
.221  
.042  
Strap  
—
—
—
—
21-30953-0  
—
17.86  
3.40  
5.61  
1.07  
Sight  
Hole  
.567  
14.40  
.129  
3.28  
.226  
5.74  
.042  
1.07  
1
12–10  
—
—
—
330369*1  
5,180–13,100  
2.62–6.64  
[
]
.565  
.129  
.226  
.565  
.134  
.221  
.042  
21-  
1
Standard  
Strap  
32151*1 21-34228*0  
14.35  
3.28  
5.74  
14.35  
3.40  
5.61  
1.07  
.765  
19.43  
.129  
3.28  
.226  
5.74  
.765  
19.43  
.134  
3.40  
.221  
5.61  
.042  
1.07  
324893-1 1-324898-0  
.827  
.172  
.296  
.051  
21-  
21  
8
Standard  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34321*1  
—
—
—
—
—
—
—
—
21.01  
4.37  
7.52  
1.30  
13,100–20,800  
[6.64–10.5]  
Sight  
Hole  
.827  
21.01  
.172  
4.37  
.296  
7.52  
.051  
1.30  
36906*1  
34322*1  
36886*1  
34323*1  
1.015  
25.78  
.232  
5.89  
.369  
9.37  
.060  
1.52  
21  
21  
21  
1
6
Standard  
20,800–33,100  
[10.5–16.8]  
Sight  
Hole  
1.015  
25.78  
.232  
5.89  
.369  
9.37  
.060  
1.52  
1.140  
28.96  
.296  
7.52  
.463  
11.76  
.073  
1.85  
4
Standard  
33,100–52,600  
[16.8–26.7]  
Sight  
Hole  
1.140  
28.96  
.296  
7.52  
.463  
11.76  
.073  
1.85  
320238-1  
35189*  
1.265  
32.13  
.370  
9.40  
.539  
13.69  
.073  
1.85  
Standard  
2
52,600–83,700  
[26.7–42.4]  
Sight  
Hole  
1.265  
32.13  
.370  
9.40  
.539  
13.69  
.073  
1.85  
322246*  
Note: Part numbers are shown as loose piece over tape mounted product.  
*Part numbers are available in small quantity packages.  
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).  
36  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Butt Splices (Continued)  
Wire Size Range  
AWG 1/0 to 600 MCM,  
CMA 83,700 to 600,000  
[42.4 to 304 mm2]  
Material  
Splice Body—Copper per  
ASTM B-152  
Plating — Tin per MIL-T-10727  
A
Solistrand  
Wire  
Circular Mils1  
[mm2]  
Material  
Thickness  
Max.  
Dimensions  
Part Numbers  
Solistrand  
Style  
L
Max.  
I.D.  
Min.  
O.D.  
Max.  
1/0  
1.412  
.444  
.613  
.073  
83,700–119,500  
[42.4–60.6]  
A
A
A
A
A
A
A
A
36957*  
36958*  
35.86  
11.28  
15.57  
1.85  
2/0  
1.437  
36.50  
.504  
12.80  
.693  
17.60  
.083  
2.11  
119,500–150,500  
[60.6–76.3]  
3/0  
1.480  
37.60  
.565  
14.35  
.775  
19.69  
.094  
2.39  
150,500–190,000  
[76.3–96.3]  
36959*  
4/0  
1.484  
37.69  
.635  
16.13  
.869  
22.07  
.105  
2.67  
190,000–231,000  
[96.3–117]  
36960*  
250–300 MCM  
231,000–300,000  
[117–152]  
2.093  
53.16  
.753  
19.13  
1.054  
26.77  
.130  
3.30  
322279*  
322280*  
322281*  
322282*  
300–350 MCM  
300,000–380,000  
[152–193]  
2.217  
56.31  
.819  
20.80  
1.137  
28.88  
.140  
3.56  
400 MCM  
380,000–478,000  
[193–242]  
2.467  
62.66  
.925  
23.50  
1.287  
32.69  
.158  
4.01  
500–600 MCM  
478,000–600,000  
[242–304]  
2.811  
71.40  
1.070  
27.18  
1.483  
37.67  
.182  
4.62  
*Part numbers are available in small quantity packages.  
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).  
37  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals  
Wire Size Range  
AWG 26 to 16,  
CMA 202 to 3,260  
[0.1 to 1.65 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
Material  
Part Numbers  
Wire  
Insulation  
Dia. Max.  
Wire Size  
Stud  
Circular Mils  
Thickness  
Max.  
L
Max.  
E
C
Min.  
Loose  
Piece  
Tape  
Mounted  
Size  
2
W
[
]
mm  
Max.  
.464  
.391  
.121  
.140  
.020  
.082  
0
31516  
31518  
3216211  
31679  
31681  
32861  
32862  
320678  
31094  
30995  
31096  
31159  
31269  
31393  
31396  
30996  
31160  
31270  
31397  
30997  
31161  
31398  
31176  
31251  
—
11.79  
9.93  
3.07  
3.56  
0.51  
2.08  
.464  
11.79  
.391  
9.93  
.121  
3.07  
.140  
3.56  
.020  
0.51  
.082  
2.08  
2-31518-1  
1-321621-01  
2-31679-1  
2-31681-2  
2-32861-2  
2-32862-1  
—
2
M2  
.564  
14.33  
.481  
12.22  
.211  
5.36  
.165  
4.19  
.020  
0.51  
.082  
2.08  
26–22  
202–810  
[0.1–0.41]  
.585  
14.86  
.481  
12.22  
.211  
5.36  
.203  
5.16  
.020  
0.51  
.082  
2.08  
4
.585  
14.86  
.481  
12.22  
.211  
5.36  
.203  
5.16  
.020  
0.51  
.082  
2.08  
6
M3.5  
.679  
17.25  
.551  
14.00  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.082  
2.08  
8
M4  
.679  
17.25  
.551  
14.00  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.082  
2.08  
2
M2  
.600  
15.24  
.507  
12.88  
.172  
4.37  
.182  
4.62  
.033  
0.84  
.125  
3.18  
.603  
15.32  
.491  
12.47  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.125  
3.18  
4
—
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.125  
3.18  
—
.603  
15.32  
.491  
12.47  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.125  
3.18  
2-31096-1  
2-31159-1  
2-31269-1  
—
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.140  
3.56  
6
M3.5  
.728  
18.49  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.125  
3.18  
.603  
15.32  
.491  
12.47  
.156  
3.96  
.218  
5.54  
.033  
0.84  
.140  
3.56  
.728  
18.49  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.140  
3.56  
2-31396-2  
2-30996-1  
2-31160-1  
2-31270-1  
2-31397-1  
2-30997-1  
2-31161-1  
2-31398-1  
2-31176-1  
2-31251-1  
22–16  
509–3,260  
[0.26–1.65]  
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.125  
3.18  
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.140  
3.56  
8
M4  
.728  
18.49  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.125  
3.18  
.728  
18.49  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.140  
3.56  
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.125  
3.18  
.775  
19.69  
.616  
15.65  
.281  
7.14  
.312  
7.92  
.033  
0.84  
.140  
3.56  
10  
.728  
18.49  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.140  
3.56  
1.009  
25.63  
.772  
19.61  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.140  
3.56  
1/4  
M6  
1.009  
25.63  
.772  
19.61  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.125  
3.18  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
1Slightly unusual tongue shape.  
38  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Ring Tongue Terminals (Continued)  
Wire Size Range  
AWG 16 to 10,  
CMA 2,050 to 13,100  
[1.04 to 6.64 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
Material  
Part Numbers  
Wire  
Insulation  
Dia. Max.  
Wire Size  
Stud  
Circular Mils  
Thickness  
Max.  
L
Max.  
E
C
Min.  
Loose  
Piece  
Tape  
Mounted  
Size  
2
W
[
]
mm  
Max.  
.634  
.506  
.171  
.250  
.033  
.150  
32187  
32189  
30926  
32188  
32190  
30927  
30928  
30993  
31256  
31169  
33722  
33639  
322296  
31825  
321501  
326889  
324523  
31771  
31772  
31828  
—
—
16.10  
12.85  
4.34  
6.35  
0.84  
3.81  
4
.634  
16.10  
.506  
12.85  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.170  
4.32  
.790  
20.07  
.616  
15.65  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.170  
4.32  
—
6
M3.5  
.634  
16.10  
.506  
12.85  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.150  
3.81  
—
.634  
16.10  
.506  
12.85  
.171  
4.34  
.250  
6.35  
.033  
0.84  
.170  
4.32  
2-32190-1  
2-30927-1  
2-30928-1  
2-30993-1  
—
16–14  
2,050–5,180  
[1.04–2.62]  
8
M4  
.790  
20.07  
.616  
15.65  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.170  
4.32  
.790  
20.07  
.616  
15.65  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.170  
4.32  
10  
.790  
20.07  
.616  
15.65  
.281  
7.14  
.343  
8.71  
.033  
0.84  
.150  
3.81  
1/4  
M6  
1.009  
25.63  
.772  
19.61  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.150  
3.81  
5/16  
M8  
1.009  
25.63  
.772  
19.61  
.437  
11.10  
.469  
11.91  
.033  
0.84  
.170  
4.32  
2-31169-1  
2-33722-1  
—
.970  
24.64  
.796  
20.22  
.281  
7.14  
.343  
8.71  
.050  
1.27  
.230  
5.84  
10  
16–14HD1  
2,050–5,180  
[1.04–2.62]  
1.220  
30.99  
.952  
24.18  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.230  
5.84  
1/4  
M6  
1.282  
32.56  
1.014  
25.76  
.437  
11.10  
.531  
13.49  
.050  
1.27  
.300  
7.62  
—
1.007  
25.58  
.817  
20.75  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.230  
5.84  
—
6
M3.5  
.877  
22.28  
.734  
18.64  
.219  
5.56  
.281  
7.14  
.042  
1.07  
.230  
5.84  
2-321501-1  
—
.976  
24.79  
.817  
20.75  
.302  
7.67  
.312  
7.92  
.042  
1.07  
.230  
5.84  
12–10  
5,180–13,100  
[2.62–6.64]  
8
M4  
.955  
24.26  
.796  
20.22  
.281  
7.14  
.312  
7.92  
.042  
1.07  
.230  
5.84  
—
1.007  
25.58  
.817  
20.75  
.302  
7.67  
.375  
9.53  
.042  
1.07  
.230  
5.84  
10  
2-31771-1  
2-31772-1  
—
1/4  
M6  
1.251  
31.78  
.983  
24.97  
.468  
11.89  
.531  
13.49  
.042  
1.07  
.230  
5.84  
1.345  
34.16  
1.046  
26.57  
.531  
13.49  
.593  
15.06  
.042  
1.07  
.230  
5.84  
3/8  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
1Heavy Duty for extra mechanical strength.  
39  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Knife Disconnect Splices  
Wire Size Range  
AWG 22 to 10,  
CMA 509 to 13,100  
[0.26 to 6.64 mm2]  
Material  
Splice Body and Sleeve— Copper  
per ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Wire  
Part Numbers  
Wire Size  
Circular Mils  
[mm2]  
Insulation  
L
Max.  
Loose  
Piece  
Tape  
W
Dia. Max.  
Mounted  
.794  
.203  
.125  
31770  
31777  
31943  
31944  
—
22–16  
20.17  
5.16  
3.18  
509–3,260  
[0.26–1.65]  
.794  
20.17  
.203  
5.16  
.140  
3.56  
2-31777-1  
.794  
20.17  
.203  
5.16  
.150  
3.81  
—
—
16–14  
2,050–5,180  
[1.04–2.62]  
.794  
20.17  
.203  
5.16  
.170  
4.32  
12–10  
5,180–13,100  
[2.62–6.64]  
1.176  
29.87  
.281  
7.14  
.230  
5.84  
31942  
2-31942-1  
Slotted Ring Tongue Terminals  
Wire Size Range  
AWG 26 to 16,  
CMA 202 to 3,260  
[0.1 to 1.65 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
E
Part Numbers  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire  
Insulation  
Dia. Max.  
Circular Mils  
L
Max.  
C
Min.  
Loose  
Tape  
Mounted  
Size  
2
W
[
]
mm  
Max.  
Piece  
26–22  
202–810  
[0.1–0.41]  
6
M3.5  
.658  
16.71  
.551  
14.00  
.281  
7.14  
.250  
6.35  
.020  
0.51  
.082  
2.08  
322210  
—
6
.710  
.585  
.250  
.281  
.033  
.125  
34101  
—
—
22–16  
509–3,260  
[0.26–1.65]  
M3.5  
18.03  
14.86  
6.35  
7.14  
0.84  
3.18  
8
M4  
.701  
17.81  
.585  
14.86  
.250  
6.35  
.281  
7.14  
.033  
0.84  
.140  
3.56  
321543  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
40  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Rectangular Tongue Terminals  
Wire Size Range  
AWG 22 to 16,  
CMA 509 to 3,260  
[0.26 to 1.65 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
E
Part Numbers  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire  
Insulation  
Dia. Max.  
Circular Mils  
L
Max.  
C
Min.  
Loose  
Piece  
Tape  
Mounted  
Size  
2
W
[
]
mm  
Max.  
22–16  
509–3,260  
[0.26–1.65]  
5
M3  
.786  
19.96  
.633  
16.08  
.277  
7.04  
.277  
7.04  
.033  
0.84  
.140  
3.56  
328500  
—
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
Flanged Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 14,  
CMA 202 to 5,180  
[0.1 to 2.62 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
Part Numbers  
Wire Size  
Stud  
Material  
Wire  
Circular Mils  
Thickness Insulation  
L
Max.  
E
Max.  
C
Loose  
Tape  
Mounted  
Size  
2
W
X
H
[
]
mm  
Max.  
Dia. Max.  
Min.  
Piece  
26–22  
202–810  
[0.1–0.41]  
2
M2  
.588  
14.94  
.473  
12.01  
.203  
5.16  
.182  
4.62  
.110  
2.79  
.031  
0.79  
.020  
0.51  
.082  
2.08  
324598  
2-324598-1  
6
.668  
.538  
.203  
.296  
.125  
.046  
.033  
.125  
2
32419  
32495  
2-32419-1  
22–16  
M3.5  
16.97  
13.67  
5.16  
7.52  
3.18  
1.17  
0.84  
3.18  
509–3,260  
[0.26–1.65]  
8
M4  
.761  
19.33  
.585  
14.86  
.250  
6.35  
.416  
10.57  
.171  
4.34  
.062  
1.57  
.033  
0.84  
.125  
3.18  
—
—
16–14  
2,050–5,180  
[1.04–2.62]  
8
M4  
.685  
17.40  
.555  
14.10  
.203  
5.16  
.294  
7.47  
.125  
3.18  
.052  
1.32  
.033  
0.84  
.170  
4.32  
320859  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
41  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Spade Tongue Terminals  
Wire Size Range  
AWG 26 to 16,  
CMA 202 to 3,260  
[0.1 to 1.65 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating —Tin per MIL-T-10727  
Dimensions  
Part Numbers  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Wire  
Insulation  
Dia. Max.  
Circular Mils  
L
Max.  
E
Max.  
C
Min.  
Loose  
Piece  
Tape  
Mounted  
Size  
2
W
X
[
]
mm  
.415  
.348  
.078  
.125  
.062  
.020  
.082  
0
4
32502  
34248  
33766  
33799  
320379  
—
—
—
—
—
26–22  
10.54  
8.84  
1.98  
3.18  
1.57  
0.51  
2.08  
202–810  
[0.1–0.41]  
.558  
14.17  
.481  
12.22  
.211  
5.36  
.203  
5.16  
.072  
1.83  
.020  
0.51  
.082  
2.08  
6
M3.5  
.684  
17.37  
.538  
13.67  
.203  
5.16  
.297  
7.54  
.141  
3.58  
.033  
0.84  
.125  
3.18  
22–16  
509–3,260  
[0.26–1.65]  
6
M3.5  
.684  
17.37  
.538  
13.67  
.203  
5.16  
.297  
7.54  
.141  
3.58  
.033  
0.84  
.140  
3.56  
.807  
20.50  
.631  
16.03  
.296  
7.52  
.343  
8.71  
.171  
4.34  
.033  
0.84  
.125  
3.18  
10  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
42  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Knife Disconnect Splices  
Wire Size Range  
AWG 22 to 8,  
CMA 509 to 20,800  
[0.26 to 10.5 mm2]  
Material  
Splice Body and Sleeve— Copper  
per ASTM B-152  
Plating — Tin per MIL-T-10727  
Dimensions  
Part Numbers  
Wire Size  
Circular Mils  
L
Max.  
Loose  
Piece  
2
W
[
]
mm  
22–16  
.745  
.203  
509–3,260  
[0.26–1.65]  
31762  
31763  
31945  
32161  
18.92  
5.16  
16–14  
2,050–5,180  
[1.04–2.62]  
.750  
19.05  
.203  
5.16  
12–10  
5,180–13,100  
[2.62–6.64]  
.940  
23.88  
.281  
7.14  
8
1.225  
31.12  
.390  
9.91  
13,100–20,800  
[6.64–10.5]  
Rectangular Tongue Terminals  
Wire Size Range  
AWG 22 to 14,  
CMA 509 to 5,180  
[0.26 to 2.62 mm2]  
Material  
Terminal Body and Sleeve—  
Copper per ASTM B-152  
Plating — Tin per MIL-T-10727  
Style A  
Style B  
with Side Flange  
with Bossed Hole  
Dimensions  
Part Numbers  
Wire Size  
Stud  
Material  
Thickness  
Max.  
Circular Mils  
Style  
L
Max.  
E
Max.  
C
Loose  
Piece  
Size  
2
W
X
H
[
]
mm  
Min.  
22–16  
6
.733  
.541  
.250  
.250  
.187  
.047  
.033  
509–3,260  
[0.26–1.65]  
B
A
320671  
31674  
M3.5  
18.62  
13.74  
6.35  
6.35  
4.75  
1.19  
0.84  
16–14  
2,050–5,180  
[1.04–2.62]  
8
M4  
.647  
16.43  
.484  
12.29  
.219  
5.56  
.344  
8.74  
.156  
3.96  
.094  
2.39  
.033  
0.84  
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.  
43  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
SOLISTRAND Military Approved Terminals  
Military  
Specification  
SOLISTRAND  
Approval  
Approved  
Wire Range  
MS 20659  
MS 20659  
M7928/7  
Class 1 & 2  
Class 2 Only  
Class 2 Only*  
12-10  
8-4/0  
22-14  
SOLISTRAND Class 1 and Class 2 military approved terminals meet the  
performance requirements outlined in specification Mil-T-7928G.  
*320093 also class 1 approved.  
Class 1 and Class 2  
Military Approvals  
Dimensional  
Requirement  
Application  
Tooling  
Performance  
Requirement  
Approval  
Use  
Terminals must comply  
with the dimensional  
requirements specified  
by the military.  
Hand application tool  
which must conform to  
For procurement  
by government  
Class 1  
the military’s dimensional agencies for  
and performance  
specification.  
maintenance and  
repair.  
Dimensional  
The terminal  
For procurement  
by contractors  
and  
Per Military  
Specification  
Mil-T-7928G  
requirements are  
maintained by the  
terminal manufacturers.  
For field repair  
manufacturers  
recommended  
application tooling.  
Note: Several tape  
manufacurers  
for high volume  
Class 2  
purposes Class 2  
terminals must be capable  
of being replaced by  
Class 1 Terminals  
mounted SOLISTRAND production,  
part numbers are  
currently Class 2  
approved.  
modification,  
and repair.  
Note: Where class 2 approval exists all similar (form, fit and function) parts in that product line are approved.  
Cross Reference Military to AMP Part Number  
Military Specification  
M7928/7  
M7928/7  
Dash  
Numbers  
SOLISTRAND  
Part  
Numbers  
Stud  
Size  
Class  
AWG  
34103  
2-34103-1  
34104  
Wire Size Range  
AWG 22 to 14  
1
2
2
2
2
4
2-34104-6  
34110  
3
2
6
10  
5/6  
3/8  
6
2-34110-3  
34112  
22-18  
4
2
2-34112-2  
34114  
5
2
2-34114-2  
34115  
6
2
2-34115-2  
321684  
7
2
2-321684-1  
320093  
8
1 & 2  
10  
5/16  
3/8  
4
2-320093-1  
34125  
16-14  
9
2
2
2
2-34125-6  
34126  
10  
11  
2-34126-2  
34119  
2-34119-1  
Note: Part numbers are shown as loose piece over tape mounted product.  
44  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Cross Reference Military to AMP Part Number  
Military Specification  
MS 20659  
MS20659  
Dash  
Numbers  
SOLISTRAND  
Part  
Numbers  
Stud  
Size  
Class  
AWG  
33457  
2-33457-2  
33459  
1&2  
2
Wire Size Range  
AWG 12 to 4/0  
105  
106  
107  
10  
5/16  
10  
12-10  
1&2  
2
2-33459-6  
31807  
2
2-31807-2  
31808  
8
108  
109  
110  
111  
112  
113  
114  
117  
118  
119  
120  
121  
122  
123  
124  
128  
129  
130  
2
2
5/16  
1/4  
3/8  
1/4  
3/8  
1/4  
3/8  
1/4  
3/8  
5/16  
3/8  
3/8  
1/2  
3/8  
1/2  
3/8  
3/8  
10  
321598  
33467  
6
2
31811  
2
4
31812  
2
320383  
321600  
321866  
321868  
321870  
321871  
321875  
321877  
321878  
321880  
33220  
2
2
2
2
1/0  
2/0  
3/0  
4/0  
2
2
2
2
2
2
2
12-10  
8
1&2  
2
33463  
321298  
33466  
2
6
131  
2
5/16  
2-33466-3  
33115  
4
132  
135  
136  
137  
140  
2
2
2
2
2
5/16  
1/2  
1/2  
7/8  
8
1/0  
2/0  
4/0  
36919  
321873  
321625  
324061  
33461  
8
2
1/4  
141  
2-33461-2  
320344  
33114  
6
4
143  
144  
145  
146  
147  
148  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1/2  
10  
327175  
330301  
322870  
320741  
321867  
36918  
1/2  
10  
5/16  
7/16  
5/16  
7/16  
1/4  
2
1/0  
2/0  
3/0  
321869  
321872  
321874  
321876  
321271  
321879  
36935  
7/16  
5/16  
7/16  
5/16  
7/16  
5/8  
4/0  
322228  
35476  
3/4  
165  
166  
2
2
6
12-10  
2-35476-1  
35135  
1/2  
Note: Part numbers are shown as loose piece over tape mounted product.  
45  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Description of MIL-T-7928G Test Procedures and Requirements for Terminals  
Test  
Group  
Test  
Sequence  
Test  
Type  
Test  
Description  
Samples subjected to 50 cycles, each cyle consisting of  
30 minutes at 125% of the current listed on page 48  
followed by 15 minutes with no load.  
A
Current Cycling  
1
2
B
A
B
C
Voltage Drop  
Vibration  
See test method and requirements on page 48.  
See test method on page 46.  
Voltage Drop  
Tensile  
See test method and requirements on page 48.  
See test method and requirements on page 47.  
Samples subjected to a salt spray/fog for 48 hours.  
Salt concentration to be 5%, temperature to be 35° C  
(95°) F, relative humidity to be 95-98%.  
A
Salt Spray/Corrosion  
3
4
B
C
Voltage Drop  
Tensile  
See test method and requirements on page 48.  
See test method and requirements on page 47.  
Samples subjected to 193° C for 120 hours then cooled  
to 23° C within one hour.  
A
Heat Age  
Samples subjected to a salt spray/fog for 48 hours.  
Salt concentration to be 5%, temperature to be 35° C  
(95°) F, relative humidity to be 95-98%.  
B
Salt Spray/Corrosion  
C
D
Voltage Drop  
Tensile  
See test method and requirements on page 48.  
See test method and requirements on page 47.  
Procedure for Vibration Testing of Terminals per MIL-T-7928G  
Wire Size  
“D” Dimension  
12 inches  
Duration of Test  
#12 AWG and larger or terminals  
with insulation support  
18 hours each on horizontal  
and vertical axis.  
#14 AWG and smaller with  
no insulation support  
2 hours each on horizontal  
and vertical axis.  
17 inches  
Vibration to be a simple harmonic motion with an amplitude of 0.03 inches (0.06 total excursion). Frequency to vary  
uniformly from 10–55 Hz and back to 10 Hz. Frequency to be traversed in approximately one minute.  
46  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Military Tensile Test Results  
Tensile Requirements  
Per MIL-T-7928G  
SOLISTRAND Tensile Test Results  
Wire Sizes 22 – 10  
Tensile (lbs.)  
Wire Size  
Minimum Tensile  
Strength (Lbs)  
250  
AWG  
22  
20  
18  
16  
14  
12  
10  
8
15  
19  
38  
200  
150  
100  
50  
50  
70  
110  
150  
225  
300  
400  
550  
700  
750  
825  
875  
6
4
2
1/0  
2/0  
3/0  
4/0  
Note: 1. Samples tensile tested to  
destruction at a rate of one inch/  
minute using military approved wire.  
0
22  
18  
16  
14  
12  
10  
Wire Size  
SOLISTRAND Tensile Test Results  
Wire Sizes 1/0 – 4/0  
SOLISTRAND Tensile Test Results  
Wire Sizes 8–2  
Tensile (lbs.)  
1500  
Tensile (lbs.)  
3500  
3000  
2500  
2000  
1500  
1000  
500  
1000  
500  
0
0
8
6
4
2
1/0  
2/0  
3/0  
4/0  
Wire Size  
Wire Size  
Tensile after  
Vibration  
Tensile after  
Salt Spray  
MIL-T-7928  
Requirement  
47  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Illustration of Millivolt Drop Measurement Procedure  
Military Specification  
MIL-T-7928G  
Maximum Crimp MVD =  
EWL Measurement + Valve  
Test  
Wire Size  
AWG  
Listed Below  
Current  
(Amperes)  
Initial  
Final  
Terminal  
Terminal  
22  
20  
18  
16  
14  
12  
10  
8
9
11  
16  
22  
32  
41  
1
3
55  
73  
6
101  
135  
181  
245  
283  
328  
380  
4
2
1/0  
2/0  
3/0  
4/0  
2
4
Military Millivolt Drop Test Results  
MVD  
10  
SOLISTRAND  
Millivolt Drop Results  
Per MIL-T-7928G  
Using Military  
Approved Wire  
8
6
4
Max. Allowable MVD  
MVD of Equal Wire  
Length  
After Current Cycling  
After Vibration  
After Corrosion  
2
0
22  
18  
16  
14  
12  
10  
8
6
4
2
1/0  
2/0  
3/0  
4/0  
Wire Size  
48  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Description of UL 486A Test Procedures and Requirements for Terminals  
Wire Size Range  
Pullout Test Requirements  
Static Heat Test Requirements  
Terminal must not be separate from wire when  
subjected to the listed load for one minute.  
AWG 22 to 600 MCM  
Wire Size  
AWG  
22  
Test Current  
(Amperes)  
Wire Size  
AWG  
22  
Pullout  
9
Test Sequences  
Force (lbs.)  
20  
12  
Test Group 1  
Mechanical Sequence  
1. Secureness  
2. Pullout  
8
18  
17  
20  
13  
16  
18  
18  
20  
14  
30  
16  
30  
12  
35  
Test Group 2  
Mechanical Sequence  
14  
50  
10  
50  
12  
70  
8
70  
1. Secureness  
2. Static Heat  
3. Pullout  
10  
80  
6
95  
8
90  
4
125  
170  
230  
265  
310  
360  
405  
445  
505  
545  
620  
690  
6
100  
140  
180  
250  
300  
350  
450  
500  
550  
600  
650  
800  
900  
2
4
1/0  
2/0  
3/0  
4/0  
250  
300  
350  
400  
500  
600  
2
1/0  
2/0  
3/0  
4/0  
250  
300  
350  
400  
500  
600  
Requirement:  
Connector temperatures must not exceed the ambi-  
ent temperature plus 50°C [90°F] after stability is  
attained.  
Note: Testing conducted on non-plated  
copper wire with UL approved insulation.  
Stability:  
A test sample is considered to have attained a stable  
temperature when three readings taken at not less  
than 10 minute intervals show no more than a 2°C  
[3.6°F] variation between any two readings.  
Secureness Test Requirements  
Wire Size  
AWG  
18-16  
14  
Bushing  
Dia.  
Weight  
(lbs.)  
Height  
1/4  
3/8  
3/8  
3/8  
1/2  
1/2  
9/16  
5/8  
3/4  
3/4  
3/4  
7/8  
7/8  
1
10 1/4  
11  
2
3
12-10  
8
11  
5
11  
8
6
11 3/4  
11 3/4  
12 1/2  
13 1/2  
14 1/2  
14 1/2  
14 1/2  
16  
18  
30  
30  
50  
50  
60  
60  
60  
80  
80  
100  
4
2
1/0  
2/0  
3/0  
4/0  
250  
300  
16  
350-400  
500-600  
17  
1 1/8  
18 1/4  
Note: Test Duration = 30 Minutes  
49  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Description of UL 486A & C Test Procedures and Requirements  
for Butt and Parallel Type Splices  
UL 486 C Wire Size  
AWG 22 to 6  
Pullout Test Requirements  
Splices must not be separate from wire when  
subjected to the listed load for one minute.  
Static Heat Test Requirements  
Wire Size  
AWG  
22  
Test Current  
(Amperes)  
UL 486 A Wire Size  
AWG 4to 600 MCM  
Wire Size  
AWG  
22  
Pullout  
Force (lbs.)  
9
20  
12  
8
18  
17  
20  
10  
16  
18  
Test Sequences  
18  
10  
14  
30  
Test Group 1  
Mechanical Sequence  
1. Secureness  
2. Pullout  
16  
15  
12  
35  
14  
25  
10  
50  
12  
35  
8
70  
10  
40  
6
95  
Test Group 2  
Mechanical Sequence  
1. Secureness  
2. Static Heat  
3. Pullout  
8
45  
4
125  
170  
230  
265  
310  
360  
405  
445  
505  
545  
620  
690  
6
50  
2
4
140  
180  
250  
300  
350  
450  
500  
550  
600  
650  
800  
900  
1/0  
2/0  
3/0  
4/0  
250  
300  
350  
400  
500  
600  
2
1/0  
2/0  
3/0  
4/0  
250  
300  
350  
400  
500  
600  
Requirement:  
Connector temperatures must not exceed the ambi-  
ent temperature plus 50°C [90°F] after stability is  
attained.  
Note: Testing conducted on non-plated  
copper wire with UL approved insulation.  
Stability:  
A test sample is considered to have attained a stable  
temperature when three readings taken at not less  
than 10 minute intervals show no more than a 2°C  
[3.6°F] variation between any two readings.  
Secureness Test Requirements  
Wire Size  
Bushing  
Dia.  
Weight  
(lbs.)  
Height  
AWG  
18-16  
14  
1/4  
3/8  
3/8  
3/8  
1/2  
1/2  
10 1/4  
11  
2
3
12-10  
8
11  
5
11  
8
6
11 3/4  
11 3/4  
18  
30  
4
Note: Test Duration=30 Minutes  
50  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling Information for SOLISTRAND, Budget and  
DIAMOND GRIP Products  
Wire Size Range  
AWG 26 to 6  
Tooling For  
Tape Mounted Products  
Pneumatic Tooling  
Dies for  
69875  
Dies for 6-26, Tool  
189721-1 Requires  
Straight Action  
Adapter 217200-1  
or 318161-1  
Crimping  
Heads  
for  
AMP-TAPETRONIC  
AMP  
Wire  
Size  
Product  
Type  
Hand  
Tools  
AMP-O-LECTRIC6  
6-26,  
Requires  
Applicator  
Tool  
189721-1  
Dies Also Fit  
69710-1  
AMPOMATOR CLS IV  
Requires  
Hand Tool  
Single  
Multiple  
Wire Range  
Wire Range  
Applicators  
26-22  
24-20  
22-16  
16-14  
693632  
—
—
—
—
All  
314516-1  
314517-1  
679301-1  
679301-1  
47812  
47813  
*68240-1  
*68241-1  
SOLISTRAND  
terminals and  
splices except  
for Flag Tongue  
terminals  
499352  
58546-13  
12-10 &  
16-14 HD  
*
—
679301-1  
478141  
68242-1  
14-12  
495922  
—
314518-1  
679302-1  
679303-1  
—
—
—
—
—
—
*90566-1  
*68243-1  
—
8
6
—
Flag terminals not  
available in tape  
mounted form  
16-14  
12-10  
499752  
499652  
693632  
58508-14  
58508-14  
217204-1  
217203-1  
Flag Tongue  
terminals only  
—
—
26-22  
22-16  
16-14  
12-10 &  
16-14 HD  
—
*
*
Budget  
terminals and  
splices  
68259-1  
—
—
—
68094  
-1  
49656, 58508-14  
*68260-1  
26-22  
24-20  
22-16  
16-14  
48070*  
—*  
—
—
—
—
—
—
—
—
—
—
*69902-1  
—
DIAMOND  
GRIP  
terminals  
and splices  
49512*  
49513*  
—
*69903-1  
69904-1  
46251-2*  
12-10 &  
16-14 HD  
*
59054  
—
—
—
*—-1  
26-22  
22-16  
16-14  
12-10  
8
—*  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
48364*  
—*  
Standard  
“B”  
terminals  
49736*  
49737*  
1For standard wire only.  
2CERTI-CRIMPHand Tool.  
3Contains die set 58545-1. PRO-CRIMPER II commercial tool not approved for UL applications.  
4Contains die set 58509-1. PRO-CRIMPER II commercial tool not approved for UL applications. Not approved for use with Budget Spring Spade terminals.  
5With locator, for terminals only.  
6Call Tooling Assistance Center for Machine & Applicator part numbers.  
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.  
51  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling Information for SOLISTRAND Terminals and Splices  
Wire Size Range  
AWG 8 to 600 MCM  
1
CERTI-CRIMPHand Tool.  
2
These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMPHydraulic Power Units 69120-1  
(115 VAC) and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated Hydraulic Power Unit 122271-1. See pages 55 & 56.  
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.  
52  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling  
Loose Form Terminal  
and Splice Tooling  
CERTI-CRIMP Hand Tools  
Heavy Head Hand Tool  
Part No. 69355  
Double Action  
Hand Tool  
“C” Head Straight  
Action Hand Tool  
Part No. 69710–1  
PRO-CRIMPER II  
Hand Tool  
Part No. 58546-1 SOLISTRAND  
58508-1 Budget  
Pneumatic Tools  
Part No. 69015  
6-26 Pneumatic Tool  
Part No. 189721-1  
Hydraulic Hand Tools  
Part No. 59975-1  
(Self Contained Dies)  
Part No. 59973-1  
(Dies Required)  
For additional tooling information, call 1-800-722-1111.  
53  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling (Continued)  
Tape Mounted  
AMP-TAPETRONIC Machine  
69875, 68250-1  
AMP-O-LECTRIC, Model “G” Machine  
(Requires Applicator and Dies)  
(Requires Dies)  
AMPOMATOR CLS IV Machine 217500-1  
(Requires Applicators and Dies)  
Entry Level Terminator  
(Requires Applicators and Dies)  
For additional tooling information, call 1-800-722-1111.  
54  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling (Continued)  
Latch Heads and Dies  
Part No.  
69065  
Part No.  
58445-1  
Part No.  
69067  
Part No. 69069  
(Self Contained Dies)  
Part No.  
69099  
Part No.  
69097  
Part No.  
69082  
For additional tooling information, call 1-800-722-1111.  
55  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Application Tooling (Continued)  
DYNA-CRIMP II  
Battery Operated  
Hydraulic Power Unit  
Hand Operated Power Unit  
DYNA-CRIMP Electric  
Hydraulic Power Unit  
Typical interchangable hose,  
head and dies not included  
4
Power Unit Only  
(Includes Pressure Release)  
115 Volts (60 Hz) — 69120-13  
230 Volts (60 Hz) — 69120-23  
Part No. 122271-1  
314979-12 (Hose, head and dies not included)  
Refer to the table below for accessories.  
AMP application tools are designed to  
produce a carefully controlled uniform  
pressure crimp, regardless of how they  
are powered. All tools shown are  
specially designed for AMP products  
and are precision machined from hard  
tool steel.  
Handle  
Control  
Hose  
Assembly  
Foot  
Control  
Multidirectional  
Valve  
Power Units Accessories  
For Use With  
Power Unit No.  
Accessory  
Part No.  
Accessory Description  
Remarks  
7' Handle Control Assembly—Hose & Cord  
15' Handle Control Assembly—Hose & Cord  
21' Handle Control Assembly—Hose & Cord  
28' Handle Control Assembly—Hose & Cord  
59907-7  
1-59907-5  
2-59907-1  
2-59907-8  
15' Foot Switch Assembly  
68284-1  
Need Hose Assembly  
369120-13  
369120-23  
314979-12  
122271-14  
3' Hose Assembly  
7' Hose Assembly  
15' Hose Assembly  
21' Hose Assembly  
59909-3  
59909-7  
1-59909-5  
2-59909-1  
68284-1 Foot Switch  
Assembly needed with  
these Hose Assemblies  
and 69120  
2' Hose Assembly (1/4” I.D.)  
3' Hose Assembly (1/4” I.D.)  
7' Hose Assembly (1/4” I.D.)  
15' Hose Assembly (1/4” I.D.)  
314990-1  
314990-2  
314990-3  
314990-4  
More Flexible, Lighter Weight.  
Recommended for use with  
DYNA-CRIMP II Battery  
Operated Hydraulic Power Unit  
69120-13  
69120-23  
3-Way Multi-Directional Value  
3-Way Multi-Directional Value (Elec.Ctl)  
592201  
For use with  
Foot Switch only  
59220-21  
1 Contact AMP Incorporated for usage recommendations.  
2 Also see AMP Customer Manual 409-5860.  
3 Also see AMP Customer Manual 409-1950.  
4 Also see AMP Customer Manual 409-5869.  
Note: All Hoses and Handle Control Assemblies have a 3⁄8" high flow male coupler (311470-1) on each end.  
All Power Units and Heads have a 3⁄8" high flow female coupler (311471-1).  
For additional tooling information, call 1-800-722-1111.  
56  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Part Number Index  
Note: This numerical index lists all cata-  
loged parts by base no. only. Complete  
part nos. (with prefixes and/or suffixes)  
are shown on the page(s) indicated.  
Part No.  
31499  
31516  
31518  
31587  
31588  
31589  
31628  
31634  
31635  
31636  
31674  
31679  
31681  
31691  
31704  
31705  
31706  
31762  
31763  
31770  
31771  
31772  
31777  
31805  
31807  
31808  
31811  
31812  
31813  
31818  
31819  
31821  
31825  
31828  
31942  
31943  
31944  
31945  
32151  
32161  
32185  
32186  
32187  
32188  
32189  
32190  
32416  
32418  
32419  
32463  
32464  
32494  
32495  
32501  
32502  
32503  
32579  
32822  
32823  
32824  
32858  
32859  
Page  
14  
38  
38  
26  
26  
26  
32  
26  
26  
26  
43  
38  
38  
24  
26  
26  
26  
43  
43  
40  
39  
39  
40  
14  
15  
15  
16  
16, 21  
24  
36  
36  
24  
39  
39  
40  
40  
40  
43  
36  
43  
13  
13  
39  
39  
39  
39  
30  
30  
41  
36  
36  
30  
41  
26  
42  
32  
24  
12  
12  
13  
12  
12  
Part No.  
32860  
32861  
32862  
32882  
32994  
32995  
32996  
33114  
33115  
33195  
33202  
33219  
33220  
33221  
33426  
33437  
33456  
33457  
33458  
33459  
33460  
33461  
33462  
33463  
33464  
33465  
33466  
33467  
33468  
33469  
33470  
33471  
33479  
33639  
33646  
33647  
33648  
33695  
33716  
33717  
33718  
33722  
33728  
33729  
33765  
33766  
33799  
34101  
34103  
34104  
34105  
34107  
34108  
34109  
34110  
34111  
34112  
34113  
34114  
34115  
34117  
34118  
Page  
12  
38  
38  
14  
14  
26  
15  
16  
16, 21  
22  
26  
26  
15  
26  
25  
32  
14  
14  
14  
14  
15  
15  
15  
15  
16  
16  
16, 21  
16  
16  
16  
16  
16  
26  
39  
22  
22  
22  
12  
22  
22  
22  
39  
22  
22  
26  
42  
42  
40  
12  
12  
12  
12  
12  
13  
12  
12  
13  
13  
13  
13  
26  
26  
Part No.  
34119  
34120  
34121  
34122  
34123  
34124  
34125  
34126  
34128  
34129  
34130  
34137  
34138  
34194  
34226  
34227  
34228  
34247  
34248  
34261  
34266  
34318  
34319  
34320  
34321  
34322  
34323  
34384  
34404  
34459  
34484  
34486  
34487  
34518  
34520  
34525  
34567  
34582  
34583  
34829  
34830  
34833  
34834  
34891  
34892  
34896  
34964  
34965  
34966  
34967  
34968  
34969  
35116  
35135  
35183  
35184  
35185  
35187  
35189  
35212  
35247  
35277  
Page  
13  
13  
13  
13  
13  
14  
14  
14  
26  
26  
35  
35  
35  
12  
36  
36  
36  
26  
42  
32  
24  
35  
35  
35  
36  
36  
36  
26  
14  
24  
14  
14  
14  
26  
31  
24  
22  
26  
26  
22  
22  
15  
15  
14  
14  
13  
14  
14  
14  
22  
22  
22  
26  
15  
17  
17  
17  
35  
36  
32  
15  
21  
Part No.  
30691  
30692  
30693  
30694  
30695  
30696  
30697  
30926  
30927  
30928  
30953  
30972  
30993  
30995  
30996  
30997  
31049  
31087  
31088  
31089  
31090  
31091  
31094  
31096  
31101  
31112  
31113  
31114  
31120  
31122  
31123  
31159  
31160  
31161  
31163  
31164  
31165  
31169  
31172  
31173  
31176  
31251  
31256  
31264  
31265  
31266  
31269  
31270  
31393  
31396  
31397  
31398  
31423  
31425  
31428  
31430  
31442  
31498  
Page  
12  
12  
13  
13  
13  
13  
13  
39  
39  
39  
36  
15  
39  
38  
38  
38  
13  
12  
12  
12  
12  
12  
38  
38  
12  
14  
14  
14  
14  
14  
14  
38  
38  
38  
13  
14  
14  
39  
13  
13  
38  
38  
39  
12  
12  
13  
38  
38  
38  
38  
38  
38  
12  
12  
12  
12  
26  
13  
57  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Part Number Index (Continued)  
Part No.  
35278  
35432  
35476  
35493  
35494  
35495  
35555  
35625  
35664  
35665  
35666  
35668  
35669  
35670  
35678  
35680  
35771  
35772  
35775  
35776  
36189  
36195  
36199  
36200  
36201  
36216  
36269  
36270  
36271  
36272  
36451  
36467  
36499  
36807  
36808  
36809  
36810  
36815  
36880  
36886  
36906  
36909  
36915  
36916  
36917  
36918  
36919  
36921  
36922  
36923  
36925  
36927  
36929  
36930  
36932  
36934  
36935  
36946  
36948  
36951  
36953  
36957  
Page  
24  
22  
14  
26  
26  
26  
31  
21  
15  
15  
15  
17  
17  
17  
21  
31  
14  
14  
22  
22  
12  
26  
22  
22  
22  
31  
33  
33  
33  
33  
14  
12  
15  
16  
16  
16  
16  
16  
26  
36  
36  
35  
17  
17  
17  
17  
18  
18  
18, 21  
18  
18  
18  
19, 21  
19  
19  
19  
19  
35  
35  
35  
31  
37  
Part No.  
36958  
36959  
36960  
50334  
50981  
50982  
51872  
51875  
52197  
52269  
52512  
52700  
52701  
52702  
52703  
52704  
52705  
52706  
52707  
52708  
52709  
52710  
52712  
52713  
52714  
52715  
52716  
52717  
52730  
52733  
52734  
52735  
52772  
53000  
53001  
53002  
53003  
53004  
53005  
53006  
53007  
53009  
53010  
53011  
53012  
53013  
53014  
53015  
53016  
53032  
53033  
53047  
53106  
53111  
53120  
53121  
53123  
53124  
53125  
53126  
53127  
53128  
Page  
37  
37  
37  
12  
14  
14  
13  
30  
16  
15  
30  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
30  
29  
29  
29  
29  
27  
27  
27  
27  
27  
27  
27  
27  
28  
28  
28  
28  
28  
28  
28  
28  
28  
29  
29  
16  
29  
27  
27  
28  
28  
28  
28  
28  
28  
Part No.  
53150  
Page  
27  
27  
28  
28  
27  
27  
27  
27  
28  
28  
28  
28  
26  
27  
27  
27  
28  
28  
28  
28  
31  
15  
33  
21  
13  
17  
36  
18  
16  
42  
17  
43  
12  
38  
17  
17  
18  
16  
18  
30  
17  
17  
22  
22  
15  
15  
15  
15  
15  
15  
24  
24  
24  
24  
24  
25  
25  
30  
30  
30  
30  
30  
Part No.  
320857  
320859  
320870  
321007  
321024  
321051  
321056  
321059  
321060  
321063  
321064  
321066  
321121  
321123  
321163  
321165  
321198  
321201  
321253  
321259  
321262  
321265  
321271  
321272  
321275  
321277  
321280  
321288  
321289  
321298  
321441  
321463  
321499  
321501  
321543  
321557  
321558  
321576  
321580  
321582  
321584  
321598  
321600  
321621  
321625  
321632  
321683  
321684  
321691  
321801  
321809  
321827  
321828  
321829  
321866  
321867  
321868  
321869  
321870  
321871  
321872  
321873  
Page  
30  
41  
24  
13  
36  
33  
33  
33  
33  
33  
33  
34  
33  
34  
19  
22  
36  
33  
33  
34  
21  
21  
19  
21  
33  
34  
36  
31  
31  
16  
33  
26  
25  
39  
40  
25  
25  
33  
34  
34  
34  
16  
17  
38  
19  
32  
13  
13  
24  
36  
31  
14  
14  
14  
17  
17, 21  
17  
18  
18  
18  
18  
18  
53175  
53177  
53226  
53235  
53266  
53267  
53268  
53270  
53271  
53273  
53274  
53555  
53830  
53831  
53832  
53833  
53834  
53835  
53836  
55812  
55991  
184147  
184269  
320093  
320138  
320238  
320266  
320344  
320379  
320383  
320671  
320677  
320678  
320741  
320743  
320744  
320745  
320748  
320749  
320754  
320755  
320758  
320759  
320760  
320761  
320762  
320763  
320764  
320765  
320814  
320815  
320818  
320819  
320820  
320822  
320823  
320852  
320853  
320854  
320855  
320856  
58  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
SOLISTRAND, Budget and DIAMOND GRIP  
Uninsulated Terminals and Splices  
Catalog 65505  
Revised 9-00  
Part Number Index (Continued)  
Part No.  
321874  
321875  
321876  
321877  
321878  
321879  
321880  
322204  
322210  
322211  
322215  
322222  
322223  
322224  
322225  
322227  
322228  
322235  
322242  
322246  
322252  
322253  
322254  
322257  
322258  
322259  
322262  
322263  
322264  
322267  
322269  
322270  
322271  
322273  
322275  
322276  
322277  
322278  
322279  
322280  
322281  
322282  
322291  
322296  
322391  
Page  
18, 21  
18  
18  
19  
19  
19  
19  
33  
40  
31  
34  
19  
19  
18  
18  
19  
19  
13  
15  
36  
19  
19  
19  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
35  
35  
35  
35  
37  
37  
37  
37  
18  
39  
18  
Part No.  
322408  
322418  
322428  
322441  
322443  
322445  
322447  
322451  
322454  
322455  
322459  
322514  
322704  
322725  
322727  
322763  
322764  
322768  
322771  
322772  
322773  
322776  
322819  
322821  
322832  
322833  
322870  
322905  
322906  
322909  
322912  
322927  
322939  
322945  
322946  
322996  
323034  
323050  
323086  
323087  
323096  
323106  
323112  
323119  
323124  
Page  
24  
12  
20  
32  
32  
32  
14  
26  
14  
14  
36  
31  
16  
30  
33  
20  
20  
21  
12  
20  
20  
30  
33  
21  
22  
22  
17, 21  
21  
21  
21  
21  
12  
20  
25  
25  
26  
19  
19  
12  
13  
12  
24  
24  
24  
30  
Part No.  
323127  
323129  
323135  
323136  
323140  
323143  
323144  
323196  
323222  
323291  
323823  
323832  
323834  
323835  
323837  
323838  
323868  
324001  
324023  
324035  
324061  
324105  
324124  
324202  
324209  
324521  
324523  
324578  
324579  
324598  
324599  
324604  
324605  
324893  
324898  
324910  
324911  
324955  
325069  
325195  
325196  
326850  
326854  
326889  
327025  
Page  
26  
31  
32  
30  
19  
30  
30  
33  
20  
17  
26  
31  
26  
31  
31  
31  
18  
36  
21  
21  
15  
20  
13  
20  
32  
26  
39  
30  
30  
41  
30  
30  
30  
36  
36  
14  
14  
13  
33  
26  
26  
12  
13  
39  
36  
Part No.  
327175  
327732  
327882  
327887  
327902  
327905  
327951  
327953  
327955  
327959  
327971  
328050  
328339  
328341  
328342  
328349  
328353  
328355  
328356  
328363  
328377  
328395  
328500  
328522  
328872  
328970  
328971  
329966  
330301  
330367  
330368  
330369  
330539  
330827  
330968  
330969  
330970  
331269  
331401  
331414  
331417  
331420  
331423  
331880  
332042  
Page  
17  
22  
20  
34  
32  
32  
24  
25  
24  
25  
25  
25  
24  
24  
24  
24  
24  
24  
24  
24  
13  
26  
41  
30  
31  
13  
14  
13  
17  
36  
36  
36  
24  
26  
22  
23  
23  
25  
12  
22  
23  
23  
23  
23  
22  
59  
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.  
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.  
Specifications subject to change. Consult AMP for latest specifications.  
Contact Us Worldwide  
Catalog 65505  
Revised 9-00  
Americas  
Argentina – Buenos Aires  
Phone: + 54-1-733-2000  
Fax: + 54-1-717-0988  
Chile – Santiago  
Phone: + 56-2-739-1230  
Fax: + 56-2-739-1227  
United States – Harrisburg, PA  
Phone: + 1-717-564-0100  
Fax: + 1-717-986-7575  
Brazil – Sao Paulo  
Phone: + 55-11-861-1311  
Fax: + 55-11-861-0397  
Colombia – Bogota  
Phone: + 57-1-231-9398  
Fax: + 57-1-240-3769  
Venezuela – Caracas  
Phone: + 58-2-986-7774  
Fax: + 58-2-986-9739  
Canada – Toronto  
Phone: + 1-905-475-6222  
Fax: + 1-905-474-5520  
Mexico – Mexico City  
Phone: + 52-5-729-0400  
Fax: + 52-5-361-8545  
For Latin/South American  
Countries not shown  
Phone: +54-11-4733-2015  
Fax: +54-11-4733-2083  
Asia/Pacific  
Australia – Sydney  
Phone: + 61-2-9840-8200  
Fax: + 61-2-9899-5649  
Malaysia – Selangor  
Phone: + 60-3-7053055  
Fax: + 60-3-7053066  
Philippines – Makati City  
Phone: + 632-867-8641  
Fax: + 632-867-8661  
India – Bangalore  
Phone: + 91-80-841-0200  
Fax: + 91-80-841-0210  
New Zealand – Auckland  
Phone: + 64-9-634-4580  
Fax: 64-9-634-4586  
Singapore – Singapore  
Phone: + 65-482-0311  
Fax: + 65-482-1012  
Indonesia – Jakarta  
People’s Republic of China  
Hong Kong  
Taiwan – Taipei  
Phone: + 6221-526-7852  
Fax: + 6221-526-7856  
Phone: + 886-2-2325-0391  
Fax: + 886-2-2325-0398  
Phone: + 852-2735-1628  
Fax: + 852-2735-0243  
Japan – Tokyo  
Phone: + 81-44-844-8111  
Fax: + 81-44-812-3207  
Thailand – Bangkok  
Phone: + 66-2-955-0500  
Fax: + 66-2-955-0505  
Shanghai  
Phone: + 86-21-6485-0602  
Fax: + 86-21-6485-0728  
Korea – Seoul  
Phone: + 82-2-3274-0535  
Fax: + 82-2-3274-0524/0531  
Vietnam – Ho Chi Minh City  
Phone: + 84-8-8232-546/7  
Fax: + 84-8-8221-443  
Shunde  
Phone: + 86-765-7751368  
Fax: + 86-765-7752823  
Europe/Middle East/Africa  
Germany – Bensheim  
Phone: + 49-6251-133-0  
Fax: + 49-6251-133-600  
Austria – Vienna  
Inside: Phone: + 0222-277-97-0  
Fax: + 0222-277-97-333  
Sweden – Upplands Vasby  
Phone: + 46-8-50-72-50-00  
Fax: + 46-8-50-72-50-01  
Norway – Nesbru  
Phone: + 47-66-77-8899  
Fax: + 47-66-77-8855  
Outside: Phone: + 43-1-277-97-0  
Fax: + 43-1-277-97-333  
Germany – Neunkirchen - HTS Div.  
Phone: + 49-2247-305-0  
Switzerland – Steinach  
Phone: + 41-71-447-0447  
Fax: + 41-71-447-0444  
Poland – Warsaw  
Phone: + 48-22-611-59-30  
Fax: + 48-22-672-47-88  
Fax: + 49-2247-305-122  
Belgium – Kessel - Lo  
Phone: + 32-16-35-23-00  
Fax: + 32-16-35-23-52  
Great Britain – London  
Phone: + 44-208-954-2356  
Fax: + 44-208-954-6234  
Turkey – Istanbul  
Phone: + 90-212-281-8181/2/3  
Fax: + 90-212-281-8184  
Portugal – Lisbon  
Phone: + 351-1-387-70-16  
Fax: + 351-1-387-71-72  
Bulgaria – Sofia  
Phone: + 359-2-971-2152  
Fax: + 359-2-971-2153  
Greece – Athens  
Phone: + 30-1-9370-396/7  
Fax: + 30-1-9370-655  
Ukraine – Kiev  
Phone: + 38-044-246-5501  
Fax: + 38-044-246-5501  
Romania – Bucharest  
Phone: + 40-1-311-3479/3596  
Fax: + 40-1-312-0574  
Czech Republic – Kurim  
Phone: + 420-5-41-162-111  
Fax: + 420-5-41-162-223  
Holland – ’s-Hertogenbosch  
Phone: + 31-73-624-62-46  
Fax: + 31-73-621-23-65  
Russia - Moscow  
Phone: + 7-095-926-5506/07/08/09  
Fax: + 7-095-926-5505  
For Middle East/African  
Countries not shown  
Phone: +33-1-34-20-83-83  
Fax: +33-1-34-20-86-09  
Denmark – Viby  
Phone: + 45-86-295-055  
Fax: + 45-86-295-133  
Hungary – Budapest  
Phone: + 36-1-350-8633  
Fax: + 36-1-350-8634  
Russia - St. Petersburg  
Phone: + 7-812-325-30-83  
Fax: + 7-812-325-32-88  
Egypt – Cairo  
Phone: + 202-417-76-47  
Fax: + 202-419-23-34  
Ireland – Dublin  
Phone: + 353-1-820-3000  
Fax: + 353-1-820-9790  
Slovakia – Banska Bystrica  
Phone: + 421-88-415-20-11/12  
Fax: + 421-88-415-20-13  
Estonia – Haabneeme  
Phone: + 372-6205-900  
Fax: + 372-6205-980  
Israel – Tel Aviv  
Phone: + 972-3-649-1482  
Fax: + 972-3-648-4041  
Slovenia – Ljubljana  
Phone: + 386-61-161-3270  
Fax: + 386-61-161-3240  
Finland – Helsinki  
Phone: + 358-9-512-34210  
Fax: + 358-9-512-34250  
Italy – Torino  
Phone: + 39-011-4012-111  
Fax: + 39-011-4031-116  
South Africa – Midrand  
Phone: + 27-11-314-10-89  
Fax: + 27-11-314-19-10  
France – Cergy - Pontoise  
Phone: + 33-1-3420-8888  
Fax: + 33-1-3420-8600  
Lithuania – Vilnius  
Phone: + 370-2-231-402  
Fax: + 370-2-231-403  
Spain – Barcelona  
Phone: + 34-93-291-0330  
Fax: + 34-93-201-7879  
65505-5M-LUG-DAS-9-00  
Printed in U.S.A.  
Tyco Electronics Corporation, Harrisburg, PA 17105  
Technical Support Center Phone: 1-800-522-6752, fax: 717-986-3316; Internet; http://www.amp.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明