5787082-3 [MACOM]
AMPLIMITE .050 Series Cable Assemblies, Series III; AMPLIMITE .050系列电缆组件，系列III
| 型号： | 5787082-3 |
| 厂家： | 
Tyco Electronics |
| 描述： | AMPLIMITE .050 Series Cable Assemblies, Series III |
| 文件： | 总32页 (文件大小：922K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Assemblies, Series III
To meet Standard
Applications the following
106 ohm, black jacketed
cable assemblies are avail-
able. For AMPLIMITE .050
Series cable assemblies that
meet other impedance
requirements or other
lengths consult TE.
SCSI-2
SCSI-1 to SCSI-2
RS-232 (Alternate)
RS-232 (Alternate)
to RS-232
IPI-2 and HIPPI
Part Numbers
2 Meters
Application
Assembly
2 Feet
3 Meters
50 pos. .050 Series Plug to
50 pos. .050 Series Plug
SCSI-2
750254-1
5750254-2
5750732-2
750255-2
750254-3
68 pos. .050 Series Plug to
68 pos. .050 Series Plug
SCSI-2*
—
—
5750732-4
750255-3
RS-232
(Alternate)
26 pos. .050 Series Plug to
26 pos. .050 Series Plug
Part Numbers
15 Meters
Application
Assembly
5 Meters
25 Meters
IPI-2 and
HIPPI
100 pos. .050 Series Plug to
100 pos. .050 Series Plug
749755-2
—
—
*This version has spring latches. Consult TE for availability of jackscrew version.
Note: .050 centerline ribbon cable assemblies are available in single or double ended versions. These assemblies are
made using AMPLIMITE .050 Series panel mount connectors, AMPLIMITE .050 Series all-plastic connectors
and AMP-LATCH Novo receptacles. Consult TE.
SCSI—Small Computer Systems Interface
HIPPI—High Performance Parallel Interface
IPI—Intelligent Peripheral Interface
Note: All part numbers are RoHS compliant.
6
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Right-Angle Receptacle Headers, Series III
.463
[11.76]
.003
0.08
]
.118
[3.00
K
G
E
Materials:
Housing — Thermoplastic, 94V-0
rated, black. SMT compatible
Shell — Steel, plated bright nickel over
copper
Position 1
F
.050
[1.27]
.100
[2.54]
Typ.
Typ.
Bracket — Zinc, plated nickel over
copper
.406
[10.31]
Contacts — Phosphor bronze, duplex
plated [.000030] 0.00076 min. gold on
mating end; tin on solder end; all under-
plated nickel
2-56 UNC 2B
Holes
Last Position
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Technical Documents:
Product Specifications — 108-1228
Application Specifications —
114-40029
Shown With Boardlocks
Shown With Boardlocks
Shown With Boardlocks
Part Numbers
w/ Rails and Latchblocks
w/o Rails, w/ Latchblocks
w/o Rails, w/o Latchblocks
Dimensions
No. of
Pos.
With .100 [2.54]
Solder Tails
With .100 [2.54]
Solder Tails
With .100 [2.54]
Solder Tails
With .120 [3.05]
Solder Tails
E
F
G
K
Without
Boardlocks
With
Boardlocks
Without
Boardlocks
With
Boardlocks
Without
Boardlocks
With
Boardlocks
With
Boardlocks
1.580
.950
1.815
1.415
40
50
—
1761028-2
—
5787082-3
—
5787170-4*
—
40.13
24.13
46.10
35.94
1.830
46.48
1.200
30.48
2.065
52.45
1.665
42.29
5787190-5 1761028-3
5787266-5*
5787190-7 1761028-4
1761028-5
5787394-5 5787082-5
5787395-5*
5787394-7 5787082-7
5787082-9
—
—
5787170-5* 5787362-5*
1.830
46.48
1.200
30.48
2.065
52.45
1.665
42.29
50
—
—
—
—
2.280
57.91
1.650
41.91
2.515
63.88
2.115
53.72
68
5787169-7* 5787170-7* 5787362-7*
5787169-9* 5787170-9* 5787362-9*
3.080
78.23
2.450
62.23
3.315
84.20
2.915
74.04
100
—
—
*Has 4-40 threaded mating holes (2 places), for use with female screwlock Part No. 750644-1.
Note: All part numbers are RoHS compliant.
7
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Vertical Receptacle Headers With
Through-Hole Tails, Series III
L
P
Position 1
Position 2
Position 3
.406
[10.31]
.350
[8.89]
Materials:
Housing—Thermoplastic, 94V-0 rated,
2-56 Threaded
Hole 2 Plc.
.100
[2.54]
black. SMT compatible
Last Position
Shell—Steel, plated bright nickel over
copper
Bracket—Zinc, plated nickel over
copper
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end; tin on solder end; all under-
plated nickel
R
M
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
.015
.125
[3.18
0.38
.351
[8.92]
]
.150
[3.81]
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out, unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Part Number 749069-5
Part Number 749721-5
Part Number 749070-7
Dimensions
Part Numbers
w/ Rails & Latchblocks w/ Latchblocks
No. of
Pos.
L
M
P
R
Plain
1.080
.915
.450
1.315
20
26
28
40
50
68
80
100
5749069-1
5749069-2
—
—
—
27.43
23.24
11.43
33.40
1.230
31.34
1.065
27.05
.600
15.24
1.465
37.21
—
5749721-3
—
—
—
1.280
32.51
1.115
28.32
.650
16.51
1.515
38.48
1.580
40.13
1.415
35.94
.950
24.13
1.815
46.10
5749069-4
5749069-5
5749069-7
5749069-8
5749069-9
—
1.830
46.48
1.665
42.29
1.200
30.48
2.065
52.45
5749721-5
5749721-7
—
5749070-5
5749070-7
—
2.280
57.91
2.115
53.72
1.650
41.91
2.515
63.88
2.580
65.53
2.415
61.34
1.950
49.53
2.815
71.50
3.080
78.23
2.915
74.04
2.450
62.23
3.315
84.20
—
5749070-9
Note: All part numbers are RoHS compliant.
8
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Vertical Receptacle Headers With
Through-Hole Tails, Series III (Continued)
.120 [3.05] Solder Tail
Length
A
D
.763
[19.38]
Typ.
.050
[1.27]
Typ.
Position 1
Typ.
2-56UNC-2B
4 Holes
.008
B
0.20
[
]
C
.120 .007
[3.05 0.18
]
Last Position
Typ.
E
Typ.
Rails and Latch Blocks
Materials:
Housing—Thermoplastic, 94V-0 rated,
black. SMT compatible
Shell—Steel, plated bright nickel over
copper
A
Bracket—Zinc, plated nickel over
copper
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end; tin on solder end; all under-
plated nickel
D
.763
[19.38]
Typ.
.050
[1.27]
Typ.
Position 1
Typ.
4-40UNC-2B
4 Holes
.008
B
0.20
C
[
]
Related Product Data:
.120 .007
Required Hardware—page 26
Last Position
Typ.
[3.05 0.18
Typ.
]
E
Technical Documents:
Flat Top Configuration
Product Specifications—108-1228-1
Application Specifications—
114-40029
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
Dimensions
No. of
Pos.
Part No.
A
B
C
D
E
2.085
.874
.500
1.830
1.200
50/50
5787656-1
5787678-1
5787679-1*
52.96
22.20
12.70
46.48
30.48
2.535
64.39
1.124
28.55
.750
19.05
2.280
57.91
1.650
41.91
68/68
2.535
64.39
1.124
28.55
.750
19.05
2.280
57.91
1.650
41.91
*
68/68
*Flat-top configuration.
Note: All part numbers are RoHS compliant.
9
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Vertical Receptacle Headers, Series III, with
ACTION PIN Contacts (.050 x .100 [1.27 x 2.54] Centerlines)
Product Facts
I Recognized under the
Component Program of
the Underwriters
R
Laboratories, Inc.,
File No. E28476
I Certified by Canadian
Standards
Association,
R
File No. 1088108
(LR 7189A-207)
I Produced under a Quality
Management System
certified to ISO 9001
I
A copy of the
certificate is available
upon request
Shielded AMPLIMITE .050
Series headers with
ACTION PIN contacts offer
a high-density D type
interface, and a solderless
board-mount interconnection.
These vertical mount
headers are available in
20, 26, 50, 68 and 100
contact sizes. Choice of
configurations includes;
headers with rails and latch
blocks, with latch blocks
only, and without rails and
latch blocks.
AMPLIMITE .050 Series
compliant ACTION PIN
contact, the residual force
of the elastic deformation
maintains stored energy to
produce a gas-tight contact
zone between the pin and
the plated-through-hole.
This ensures long term
electrical and mechanical
reliability of the
Principle of the AMPLIMITE .050
Series Compliant ACTION PIN
Contact
Technical Documents:
Product Specification—
108-1228-2
When an AMPLIMITE .050
Series compliant
Application Specification—
114-40029
ACTION PIN contact is
inserted into a plated-
through-hole, two spring
members are compressed,
exerting force against
the hole for a gas-tight
connection. The diameter
of the hole is smaller than
the diagonal size of the pin.
Instruction Sheets—
408 6923—AMP Manual Arbor
Frame Assembly
408 9027—AMP Adapter Kit for
Greenerd Frame Assemblies 3A and 3B
408 9757—Seating Instructions
and Tooling
408 6927—Recommendations for
pc board support
interconnection.
The beam characteristics of
the pin are designed so that
a plastic, as well as an
elastic, deformation takes
place during insertion.
The two spring members
compress to different
degrees to accommodate
hole tolerances. The
compliant pin also reduces
strain on the board. With a
rigid pin, the elastic strain
energy is stored entirely in
the board, leading to
ACTION PIN contact tails
are available in two lengths;
.173 [4.39] for pc boards
with a nominal thickness of
.062 [1.56] to .093 [2.36],
and .280 [7.11] for pc
boards with a nominal
thickness of .125 [3.18]
to .200 [5.08].
AMPLIMITE .050 Series
headers with ACTION PIN
contacts are compatible
with SCSI-2, SCSI-3, EIA
RS-232, IPI-2 and HIPPI
standards.
damage of the plated-
through holes. With the
10
Catalog 82068
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
reference purposes only.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Vertical Receptacle Headers,
with ACTION PIN Tails, Series III
P
Position 2
Position 1
2-56 Thread
2 Plc.
.406
[10.31]
Last Position
L
Materials:
.350
[8.89]
Typ.
Housings—Thermoplastic, 94V-0
rated, black, SMT compatible
R
Shell—Carbon steel, plated bright tin
over copper
.275
[2.98]
Typ.
M
Typ.
Mating Face
Bracket—Zinc, plated nickel over
copper
.351
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end; tin on solder end; all under-
plated nickel
Typ.
.015
0.38
[8.92]
S
[
]
.150
[3.81]
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Technical Documents:
Product Specifications—
108-1228-2
Application Specifications—
114-40029
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
Part Number 786554-1
Part Number 786554-7
Part Number 786155-7
Dimensions
Part Numbers
w/ Rails & Latchblocks w/ Latchblocks
No. of
Pos.
L
M
P
R
S
Plain
1.080
.915
.450
1.315
.173
20
5786554-1
5786554-2
5786554-5
5786556-5
5786554-7
—
—
—
—
27.43
23.24
11.43
33.40
4.39
1.230
31.34
1.065
27.05
.600
15.24
1.465
37.21
.173
4.39
26
50
—
.173
4.39
5786155-5
—
5786555-5
—
1.830
46.48
1.665
42.29
1.200
30.48
2.065
52.45
.280
7.11
.173
4.39
5786155-7
786155-7
—
5786555-7
5786557-7
5786555-9
—
2.280
57.91
2.115
53.72
1.650
41.91
2.515
63.88
68
.280
7.11
3.080
78.23
2.915
74.04
2.450
62.23
3.315
84.20
.173
4.39
100
120
5786554-9
1-5786554-0
3.580
90.93
3.415
86.74
2.950
74.93
3.815
96.90
.173
4.39
—
Note: All part numbers are RoHS compliant.
11
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Plug Connectors, Series III
Shielded Plugs
B
.050
[1.27]
Typ.
.100
[2.54]
Typ.
.224
[5.69]
.003
0.08]
D [
Shielded Plug
.003
0.08]
A
[
Mating Face
Typ.
Shell
.010
.588
0.25
[14.94
]
Typ.
.327 +.003
-.002
+0.08
-0.05
8.31
[
]
Housing
Wire Lacing Termination Covers
Termination
Area
Materials:
Typ.
Housing and Covers—
Thermoplastic, 94V-0 rated, black or
gray
Shielded Plug with Unassembled Wire Lacing Termination Covers
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin on termination end, all
underplated .nickel
Shell—Steel, plated tin-nickel alloy
over nickel over min. copper
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
Connector With Unassembled Wire Lacing Termination Covers
Part Numbers
Dimensions
B
No. of
Pos.
.032-.036
.029-.031
[0.81-0.91]
[0.74-0.79]
A
D
Outer Wire Dia. Black Outer Wire Dia. Gray
.293
.600
.979
26
50
5750913-2
5750913-5
5750913-7
—
1-5750913-2
1-5750913-5
1-5750913-7
1-5750913-9
7.44
15.24
24.87
.293
7.44
1.200
30.48
1.579
40.11
[0.74-0.89] insulation diameter.
.293
7.44
1.650
41.91
2.029
51.54
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
68
.373
9.47
2.450
62.23
2.829
71.86
100
Notes: 1. Plug connector requires backshell kit for complete assembly. Refer to pages 16-19 for backshell kit part
Instruction Sheet—408-9427
numbers.
2. For termination, cover closing and wire lacing tooling, see page 14.
Note: All part numbers are RoHS compliant.
12
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued)
Shielded Plugs
(Continued)
B
Terminating Cover
.050
.588
[14.94]
[1.27]
.100
[2.54]
Plug Shell
.224
[5.69]
Shielded Plug with Unassembled
Standard Termination Covers
E
Plug Housing
D
.327
[8.31]
Terminating Cover
Shielded Plug with Assembled
Standard Termination Covers
Materials:
Shielded Plug with Assembled or Unassembled Standard Termination Covers
Housing and Covers—
Thermoplastic, 94V-0 rated, black
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin on termination end, all
underplated nickel
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Shell—Steel, plated tin-nickel alloy
over nickel over copper
Recommended wire size3 —
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
Connectors With Standard Termination Covers
Dimensions
Part Numbers
No. of
Pos.
B
D
E
w/Rails & Latchblocks
w/Latchblocks
[0.74-0.89] insulation diameter.
.450
.829
.293
20
26
5749111-1
1-5749111-0
—
5749621-1
11.43
21.06
7.44
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
.600
15.24
.979
24.87
.293
7.44
5749621-2
5749621-3
5749621-4
5749621-5
5749621-7
5749621-8
5749621-9
1-5749621-0
.650
16.50
1.029
26.14
.293
7.44
28
.950
24.13
1.329
33.76
.293
7.44
40
5749111-3
5749111-4
5749111-6
5749111-7
5749111-8
5749111-9
Instruction Sheet—408-9427
1.200
30.48
1.579
40.11
.293
7.44
50
1.650
41.91
2.029
51.54
.293
7.44
68
1.950
49.53
2.329
59.16
.373
9.47
80
2.450
62.23
2.829
71.86
.373
9.47
100
120
2.950
74.93
3.329
84.56
.373
9.47
Notes: 1. Plug connector requires backshell kit for complete assembly and must use round jacketed cable (discrete
or laminated). Refer to pages 16-19 for backshell kit part numbers.
2. For termination tooling, see pages 28 & 29.
3. The CHAMPOMATOR 2.5 Automatic Termination Machine will accept diameters as low as .023 [0.58].
Note: All part numbers are RoHS compliant.
13
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued)
AMPLIMITE .050 Series
Connector Application
Tooling for Use with Wire
Lacing Termination Covers
Manual Arbor Frame
Assembly—Part No. 58024-1
Equipped with Cover
Lacing Assembly—Part No.
91293-1 (Includes Seating
Bars for 50 and 100
Positions). See Table 3 for
Seating Bar Part Numbers.
Extra Lacing Stations avail-
able for use with Lacing
Assembly—Part No. 91293-1
Order Lower Tooling
Miniature Applicator Frame Assembly
Part No. 91295-1
Lower Tooling Assembly Equipped with Cover Closing Kit
Assembly—Part No. 543481-1
Arbor Frame, Part No. 58024-1
Equipped with
Cover Lacing Assembly,
Part No. 91293-1
Part No. 543481-1
Part No. 543508-1
Table Number 3
No. of
Pos.
Seating Bar
Part No.
26
40
543494-2
543494-3
543494-1
543502-2
543502-1
Note: AMP Manual Miniature
Applicator Frame Assembly, Cover
Closing Kit, and Staple Insertion Kit
each must be ordered separately by
part number.
50
68
100
Seatings Bars
Note: All Tooling must be ordered
separately by part number.
Note: All part numbers are RoHS compliant.
14
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Cable Receptacle Connectors, Series III
Shielded Receptacles
.592
[15.04]
B
Ref.
Terminating
Cover
.050
[1.27]
E
Shielded Receptacle
with Assembled
Receptacle
Housing
Termination Covers
Receptacle
Shell
Terminating
Cover
Materials:
Housing and Covers—
Thermoplastic, 94V-0 rated, black
D
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin on termination end, all
underplated nickel
Mating Face
Shell—Steel, plated bright tin over
copper
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Part Numbers
Connectors With Standard Termination Covers
Dimensions
D
No. of
Pos.
B
E
Assembled Covers
Unassembled Covers
.950
1.329
.293
40
50
—
—
24.13
33.76
7.44
1.200
30.48
1.579
40.11
.293
7.44
5749210-5
5749210-7
—
5749699-5
5749699-7
5749699-8
1.650
41.91
2.029
51.54
.293
7.44
68
2.450
62.23
2.829
71.86
.373
9.47
100
Notes: 1. Receptacle connector requires backshell kit for complete assembly. Refer to pages 16-19 for backshell
kit part numbers.
2. For termination, cover closing and wire lacing tooling, see page 14.
3. For Termination Tooling other than Wire Lacing see pages 28 & 29.
Note: All part numbers are RoHS compliant.
15
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews,
Series III
Cable Supplied
Strain Relief Staple
By Customer
(1 Supplied)
Jackscrew 2-56 Thd.
(2 Supplied)
Machine Screw
A
Straight Exit
Male Jackscrews
Style A
Connector (Must Be
Purchased Separately)
B
Upper Shield
(1 Supplied)
C
Lower Shield
(1 Supplied)
Style A
Straight Exit Male Jackscrews
Strain Relief
(1 Supplied)
Cable Supplied
By Customer
Jackscrew 2-56 Thd.
(2 Supplied)
Straight Exit
Male Jackscrews
Style B
A
Machine Screws
(4 Supplied)
Connector
(Must be
Purchased
Separately)
B
.404
[10.26]
Upper Shield
(1 Supplied)
C
Straight Exit
Female Jackscrews
Style A
Lower Shield
(1 Supplied)
Style B
Straight Exit Male Jackscrews
Cable Supplied
By Customer
Strain Relief Staple
(1 Supplied)
Materials:
Jackscrews—Stainless steel or steel,
black electroless nickel plated
Jackscrew 2-56 Thd.
(2 Supplied)
Jackscrew Caps—Polyolefin or PVC,
black
Machine Screw
A
2-56 Screws—Stainless steel
Backshell—Zinc, plated nickel over
copper
Connector (Must Be
Purchased Separately)
Strain Relief Staple—Steel, plated
tin over nickel
B
Upper Shield
(1 Supplied)
Technical Documents:
Product Specifications—108-1228
C
Application Specifications—
114-40029
Lower Shield
(1 Supplied)
Style A
Instruction Sheet—408-9427
Straight Exit Female Jackscrews
16
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews,
Series III (Continued)
Male with
#2-56
Threads
Female with
#2-56
Threads
Dimensions
B
No. of
Pos.
Max.
O.D.
Style
Pkg.
A
C
.450
Bulk
Bulk
5787543-1
5787543-2
5787543-3
5749080-1
5749080-2
5750752-3
5786152-3
5749854-1
5749081-1
1-5787543-7
11.43
1.822
46.25
1.830
46.48
.456
11.58
.400
10.16
40
B
1-5787543-8
.350
8.89
Bulk
1-5787543-9
.400
10.16
Individual
Bulk
—
—
—
—
—
—
1.270
2.085
.480
50
68
A
B
A
32.26
52.96
12.19
.400
10.16
1.887
47.93
2.645
67.18
.660
16.76
.550
13.97
Bulk
1.822
46.28
2.525
64.14
.564
14.33
.550
13.97
Individual
Individual
Individual
2.082
52.88
3.325
84.46
.615
15.62
.500
12.70
100
1.695
43.05
3.325
84.46
.595
15.11
.500
12.70
Notes: 1. Each backshell kit includes upper and lower backshells, two male or female jackscrews, one strain relief staple and two or four #2-56 screws.
All are packaged unassembled.
Notes: 2. For Staple Insertion Tooling see page 29.
Note: All part numbers are RoHS compliant.
17
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches,
Series III
Strain Relief Staple
(1 Supplied)
Cable Supplied
by Customer
Rear Plug
Machine Screw
A
Spring Latch
(2 Supplied)
Style A
Straight Exit
with Latches
Connector
(Must be
Purchased
Separately)
Upper Backshell,
(1 Supplied)
B
C
Lower Backshell
(1 Supplied)
Style A
Straight Exit with Latches
Style A
Angled Exit
with Latches
Cable Supplied
by Customer
Strain Relief Staple
(1 Supplied)
Machine Screw
A
Spring Latch
(2 Supplied)
Connector
(Must be
Purchased
Separately)
Upper Backshell
(1 Supplied)
B
Style B
Straight Exit
with Latches
C
Lower Backshell
(1 Supplied)
Materials:
Style A
Angled Exit with Latches
Backshell—Zinc, plated nickel over
copper
Spring Latch—Stainless steel
2-56 Screws—Stainless steel
Strain Relief Staple—Steel, plated
tin over nickel
Cable Supplied
by Customer
Strain Relief Staple
(1 Supplied)
Spring Latch
(2 Supplied)
A
Machine Screw
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Connector
(Must be
Purchased
Separately)
B
Instruction Sheet—408-9427
Upper Backshell
(1 Supplied)
Note: Extra pin contact protection is provided
by rails on the receptacle, which facilitate a
straight-out unmating motion. A side-to-side
rocking motion should not be used to disen-
gage the connector system.
C
Lower Backshell
(1 Supplied)
Style B
Straight Exit with Latches
18
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches,
Series III (Continued)
Straight Exit
with
Latches
Angled Exit
with
Latches
Dimensions
B
No. of
Pos.
Max.
O.D.
Style
Pkg.
A
C
1.290
1.215
.400
.270
20
A
A
B
Individual
Individual
Individual
5749190-1
—
5749199-1
5749609-1
—
32.77
30.86
10.16
6.86
1.290
32.77
1.365
34.67
.400
10.16
.270
6.86
26
1.290
32.77
1.335
33.91
.400
10.16
.270
6.86
749608-2
—
.320
8.13
5749201-1
—
1.290
32.77
1.715
43.56
.400
10.16
40
A
Individual
.320
8.13
5749192-1
—
.400
10.16
Individual
Bulk
5749202-2
—
.400
10.16
5749202-3
5749193-1
5749193-2
5749889-3
5749889-4
—
1.395
35.43
1.965
49.91
.480
12.19
A
.355
9.02
—
50
Individual
.400
10.16
—
.480
12.19
Bulk
—
1.800
45.72
1.965
49.91
.492
12.50
B
A
A
.480
12.18
Individual
—
.400
10.16
5749204-1
5749204-2
5749205-1
—
1.405
35.69
2.415
61.34
.520
13.21
68
80
Individual
Individual
.440
11.18
5749195-2
—
.420
10.67
1.600
40.64
2.715
68.96
.565
14.35
.500
12.70
749196-2
5749197-1
5749198-1
1.725
43.82
3.215
81.66
.615
15.62
.500
12.70
100
120
A
A
Individual
Individual
5749206-1
5749207-1
1.725
43.82
3.715
94.36
.665
16.89
.550
13.97
Note: All part numbers are RoHS compliant.
19
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Shielded Enclosure Kits,
With Male Jackscrews, Series III
68-Position
Material and Finish:
Backshells—Zinc
Boot—PVC, black
Jackscrews—Stainless steel and PVC,
black
Staple—Carbon steel, plated tin over
nickel
Screws—Stainless steel, #2-56 threads
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
.550
[13.97]
Max. Dia.
Cable Supplied
by Customer
1.887
[47.93]
Connector
(Must be
Purchased
Separately)
2.645
[67.18]
.660
[16.76]
.520
[13.21]
No. of
Pos.
Part Number
Male 2-56 Jackscrews
Part Number
Male 4-40 Jackscrews
68
5750752-1
5750752-2
Notes: 1. Each enclosure kit contains two backshells, one boot, two jackscrews,
one staple and two screws. All are packaged unassembled.
2. For staple insertion tooling see page 29.
3. Meets SCSI-3 standards.
Note: All part numbers are RoHS compliant.
20
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Receptacle Assemblies
Without Rails, With Latch Blocks, Series III
C
Recessed Cavity
Identification
.050
[1.27]
Typ.
.406
[10.31]
Materials:
2-56 UNC*
2 Plc.
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
Shell—Steel, plated bright nickel over
copper
E
Bracket—Zinc, plated nickel over
copper
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin in termination
area, all nickel underplated
.004
0.10]
F
[
.201 .002
[5.11 0.05
Mating Face
]
.596
[15.14]Ref.
Typ.
Contact
Typ.
.170 .002
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter or
.050 [1.27] centerline, 28 AWG
[0.08-0.09mm2]stranded, PVC, flat
ribbon cable.
[4.32 0.05
]
.007
0.18]
Housing
D
[
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Part Numbers
ConnectorsWith Unassembled
Wire LacingTermination Covers
Dimensions
D
No. of
Pos.
ConnectorsWith Assembled
StandardTermination Covers
C
E
F
.032-.036
.029-.031
[0.74-0.79]
[0.81-0.91]
OuterWire Dia. OuterWire Dia.
1.830
1.629
2.065
1.665
50
50
1-749656-1
5-750640-1*
1-749656-2
6-749656-0
5-786862-5
6-786862-5
46.48
41.38
52.45
42.29
1.830
46.48
1.629
41.38
2.065
52.45
1.665
42.29
5-786865-5*
—
—
—
2.280
57.91
2.079
52.81
2.515
63.88
2.115
53.72
68
—
—
3.580
90.93
3.379
85.83
3.815
96.90
3.415
86.74
120
*Part Numbers 5-750640-1 and 5-786865-5 have 4-40 threaded holes. All others have 2-56 threaded holes.
Note: For termination, cover closing and wire lacing tooling, see page 14.
Note: For termination tooling other than wire lacing see pages 28 & 29.
Note: All part numbers are RoHS compliant.
21
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Flat Top Receptacle Assemblies
Without Rails and Latch Blocks, Series III
C
.050
[1.27]
Typ.
Cavity
Identification
Terminating
Cover
.406
[10.31]
4-40 UNC
2 Plcs.
Receptacle
Housing
Materials:
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
E
.197
[5.00]
Mating Face
Shell—Steel, plated bright nickel over
copper
Bracket—Zinc, plated nickel over
copper
.592
Ref.
[15.04]
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end; tin on solder end; all nickel
underplated
.002
0.05
.170
[4.32
]
Typ.
.007
0.18]
D
[
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter or
.050 [1.27] centerline, 28 AWG
[0.08-0.09mm2]stranded, PVC,
flat ribbon cable
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Part Numbers
Connectors With Assembled
Standard Termination Covers
Dimensions
D
Pos.
No. of
C
E
1.830
1.629
2.065
50
68
5-749877-5
5-749877-7
5-749877-9
46.48
41.38
52.45
2.280
57.91
2.079
52.81
2.515
63.88
3.080
78.23
2.879
73.13
3.315
84.20
100
Note: For termination, cover closing and wire lacing tooling, see page 14.
Note: For termination tooling other than wire lacing see pages 28 & 29.
Note: All part numbers are RoHS compliant.
22
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Plug Assemblies
With Rails, Latch Blocks, Series III
Plug
C
.050
[1.27]
Recessed Cavity
Identification
Typ.
.406
[10.31]
2-56 UNC
2 Plc.
Materials:
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
E
Bracket—Zinc, plated nickel over
.004
0.10]
F
[
copper
Mating Face
.002
0.05
.217
[5.51
.001
0.03
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin in termination
area, all nickel underplated
.024
[0.61
Typ.
]
]
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter or
.050 [1.27] centerline, 28 AWG
[0.08-0.09mm2]stranded, PVC, flat
ribbon cable.
.598
[15.19]
Ref.
.002
0.05
.154
[3.91
]
.007
0.18]
D
[
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Dimensions
No. of
Positions
Part
Numbers
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out, unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
C
D
E
F
1.830
1.629
2.065
1.665
50
68
5-749878-5
46.48
41.38
52.45
42.29
2.280
57.91
2.079
52.81
2.515
63.88
2.115
53.72
5-749878-7
5-749878-9
3.080
78.23
2.879
73.13
3.315
84.20
2.915
74.04
100
Note: All part numbers are RoHS compliant.
23
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Plug Assemblies
With Rails, Latch Blocks, Series III (Continued)
C
.050
Cavity Identification
[1.27]
Typ.
.406
[10.31]
2-56 UNC*
2 Plc.
Materials:
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
Shell—Steel, plated bright nickel over
copper
Bracket—Zinc, plated nickel over
copper
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin in termination
area, all nickel underplated
Recommended wire size—
28 AWG [0.08-0.09mm2] or
30 AWG [0.05mm2], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter or
.050 [1.27] centerline, 28 AWG
[0.08-0.09mm2]stranded, PVC, flat
ribbon cable.
E
.004
0.05]
F [
.002
Mating Face
.201
0.05
[5.11
]
Typ.
.596
[15.14]
Typ.
Contact
Typ.
.002
.170
[4.32
0.05
]
Typ.
.007
0.18]
Housing
D [
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out, unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
Part Numbers
Connectors With Assembled
Standard Termination Covers
Dimensions
No. of
Pos.
C
D
E
F
1.080
.879
1.315
.915
20
26
5-749611-2*
5-749611-1*
5-749611-5*
5-750450-1*
27.43
22.33
33.40
23.24
1.230
31.24
1.029
26.14
1.465
37.21
1.065
27.05
1.830
46.48
1.629
41.38
2.065
52.45
1.665
42.29
50
1.830
46.48
1.629
41.38
2.065
52.45
1.665
42.29
50
3.080
78.23
2.879
73.13
3.315
84.20
2.915
74.04
100
5-749611-9
*
*Part Number 750450-1 has 4-40 threaded holes. All others have 2-56 threaded holes.
Note: For termination, cover closing and wire lacing tooling, see page 14.
Note: For termination tooling other than wire lacing see pages 28 & 29.
Note: All part numbers are RoHS compliant.
24
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Plug Assemblies Unshielded
for .025 [0.64] Centerline Ribbon Cable, Series III
.050
Typ.
Plug Assembly
Materials:
[1.27]
.003
0.08]
E
[
.015
.778
[19.76
Housing and Termination Covers—
0.38
]
Thermoplastic, 94V-0 rated, black
Unshielded
Plug Housing
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin on termination
end, all over nickel underplating
.423
[10.74]
Recommended wire size—
.025 [0.64] centerline, 30 AWG
[0.05mm2] solid or 7 strand, PVC,
flat ribbon cable.
Termination
Cover
.025
[0.64]
.003
0.08]
F
[
Note: Cable must be approved by
TE Engineering.
Dimensions
No. of
Pos.
Part
No.
E
F
Technical Documents for
5786090-7 only:
1.578
40.07
1.578
40.07
50
68
5390377-51
5786090-7
2.029
51.54
2.023
51.30
Product Specifications—108-1359
Application Specifications—
114-40049
Note: Termination Tooling: Manual Arbor Press Part No. 91085-2 or
Pneumatic Press Part No. 91112-3, Universal Base Tool Part
No. 768338-4, and Connector Specific Kit Part No. 679235-2.
Refer to page 29.
1 Accepts 32 AWG Flat Ribbon Cable. Selection of compatible ribbon cable is
the responsibility of the user.
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
A
Backshell Kit for 5786090-7
.015
B[
0.38]
Typ.
.025 [0.64] C Unshielded
C
L
Plug
.020
.682
[17.32
.015
.400
[10.16
0.51
]
0.38
]
.833
[21.16]
Typ.
Materials:
Dimensions
No. of
Pos.
Kit
Backshell—Thermoplastic, 94V-0
rated, black
Part No.
A
B
68
787032-7
2.415 [61.34]
2.125 [53.48]
Spring Latches—Stainless steel
.019
.596
0.48
[15.14
]
.466
[11.84]
4 Plc.
2 Plc.
Strain Relief for 5786090-7
.025 [0.64]CC Unshielded
L
Plug
.002
.356
[9.04
.003
1.715
[43.56
0.05
]
0.08
]
68-Position
Part No. 787043-7
Materials:
Thermoplastic, 94V-0 rated, black
.009
Note: Pull tab Part No. 88450-8
can be used with this strain relief.
Must be ordered separately.
2.109
0.23
[53.57
]
Note: All part numbers are RoHS compliant.
25
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Hardware and Dust Covers, Series III
.187
[4.75]
Screwlock Kits
Materials:
Stainless steel (female)
Steel, zinc plated black (male)
Screwlock
(2 Supplied)
.062
[1.57]
Panel
.177
[4.50]
#2-56 Thd.
Related Product Data:
Used with the following
connectors:
Right-Angle Receptacle Header—
page 7
Male
Part No. 749086-1
(Includes two screwlocks)
Connector
.532
[13.51]
Vertical Receptacle Header—
pages 8-11
.050
[1.27]
Panel Mount Plug and Receptacle
Headers—pages 21 & 22
#4-40 Thd.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
.187
[4.75]
#2-56 Thd.
Screwlock
.062
[1.57]
Panel
B
Female
(Includes two screwlocks)
Dim.
A
Dim.
B
Individual Kits
Bulk
Part No.
Part No.
.562
14.27
.157
3.99
Connector
749087-1
—
A
.380
.157
749087-21
749087-4*
749087-3
749087-8
.050
[1.27]
9.65
3.99
.562
14.27
.165
4.19
#4-40 Thd.
1 Recommended for right-angle board mount connectors.
.187
[4.75]
Dia.
2-56 UNC
B
Min. Deep
.027 .003
Typ.
]
Female
(Includes two screwlocks)
[0.69 0.08
Thread Size
Kits
Part No.
Bulk
Part No.
A
B
.110
4-40
750644-1*
786585-2
—
2.79
.090
2.29
2-56
786585-3
.100 .003
[2.54 0.08
.355
[9.02]
]
Recommended for pc board mount of panel mount connectors with
latches or latches and rails. Permits cable connectors to be spring latch-
type or jackscrew-type
A
Note: All part numbers are RoHS compliant.
26
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Performance Specifications and
Technical Documents
Performance Specifications for Mating Cycles (Durability): 500 max.
Right-Angle, Vertical and .050
Centerline Cable Products
Current Rating (30°C T-Rise): 1A max., 50% energized
Termination Resistance (Mated): 25 milliohms max.
Insulation Resistance: 1000 megohms min.
Dielectric Withstanding Voltage: 500 VAC
Header Processing Temperature: +220°C max. for 3 minutes
Temperature Range: –55°C to 105°C
Performance Specifications for Current Rating (30°C T-Rise): 1A max. center four contacts energized (two from top row, two
.025 [1.27] Centerline Ribbon
Cable Product. Same as above
except:
from bottom row)
Termination Resistance (Mated): 50 milliohms max.
Product Specifications:
108-1228
108-1359
108-1228
AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied
AMPLIMITE .050 Series .025 [0.64] Centerline Connectors
AMPLIMITE .050 Series Stacked Connectors
108-1228-2 AMPLIMITE .050 Series ACTION PIN Connectors
108-1228-3 AMPLIMITE .050 Series SBus Connectors
Application Specifications:
114-40029 AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied
Connectors
114-40049 AMPLIMITE .050 Series .025 [0.64] Centerline Connectors
Instruction Sheets:
408-6923
408-6927
AMP Manual Arbor Frame Assembly
TE Design Recommendations for Printed Circuit Board
Support Fixture
408-9200
408-9822
408-9820
408-9663
408-9750
408-9757
408-9817
408-9427
408-9875
408-9892
AMP Single Wire Insertion Tool
Wire Termination Tooling Kit for CHAMPOMATOR 2.5 Machine
AMP Cover Closing and Staple Inserter Kits
AMP Mass Insertion Tool
AMP Cover Lacing Fixture
AMP Tooling Assembly for ACTION PIN Receptacles
AMP Manual Miniature Applicator Frame Assembly
Round-to-Flat Cable Termination
AMP Universal Base Tool for .025 [0.64] C Connectors
L
AMP Tool Kit for .025 [0.64] C Connectors
L
Customer Manuals:
409-5839
409-5791
CHAMPOMATOR 2.5 Machine
Control Unit for CHAMPOMATOR 2.5 Machine
27
Catalog 82068
Revised 4-12
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Application Tooling, Series III
Discrete Wire
Application Tooling
To meet medium to high
volume production of
dis-crete wire terminations,
TE offers the following
tooling:
The CHAMPOMATOR
Model 2.5 Bench
Terminating Machine—
Part No. 354786-1, used in
conjunction with Control
Module—Part No. 852423- ,
▫
and Tie Bar—Part No.
Control Module
Part No. 852423-1 120 VAC
852423-2 100 VAC
CHAMPOMATOR
2.5 Machine Tool Kit
Part No. 354786-1
762637- (Table No. 1).
▫
852423-3 230 VAC
Note: The CHAMPOMATOR 2.5 Machine includes plug
and receptacle nests, as well as wire setup gauge.
Table Number 1
Connector
Size
Tie Bar
Part No.
20 Pos.
26 Pos.
28 Pos.
40 Pos.
50 Pos.
60 Pos.
68 Pos.
80 Pos.
100 Pos.
120 Pos.
1-762637-1
1-762637-1
1-762637-2
1-762637-3
1-762637-4
1-762637-5
1-762637-6
1-762637-7
1-762637-9
1-762637-0
Discrete Wire
Application Tooling
For low to medium volume
production use the AMP
Arbor Frame Assembly—
Part No. 58024-1 equipped
with Applicator—Part No.
91291-1 for .032-.035
[0.81-0.89] Conductor
Insulation O.D. and Appli-
cator—Part No. 91291-2
for .029-.032 [0.74-0.81]
Conductor Insulation O.D.
Note: AMP Arbor Frame Assembly and
Applicator Kit must be ordered separately.
Arbor Frame
Part No. 58024-1
Equipped with
Applicator Part No.
91291-
▫
Note: All part numbers are RoHS compliant.
28
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Application Tooling, Series III (Continued)
Cover Closing/
Termination Tooling
Manual Miniature Applicator
Frame Assembly—
Part No. 91295-1
This Frame requires Cover
Closing Kit—Part No. 543508-1
Cable Staple Tooling
To provide cable strain relief
use Manual Miniature
Applicator Frame Assembly—
Part No. 91295-1. This Frame
requires Staple Insertion
Kit—Part No. 543515-1 to
install staples into lower
backshells of connector kits
and assemblies.
Staple Insertion Kit
Part No. 543515-1
(For use with Miniature Applicator
Frame Assembly
Part No. 91295-1)
Miniature Applicator Frame Assembly
Part No. 91295-1
Equipped with Cover Closing Kit
Part No. 543508-1
AMPLIMITE .050 Series
Connector Application
Tooling for Use with Wire
Lacing Terminating Covers
Manual Arbor Frame
Assembly—Part No. 58024-1
Seatings Bars
Equipped with Cover
Lacing Assembly—Part No.
91293-1 (Includes Seating
Bars for 50 and 100 Positions).
See Table 3 for Seating Bar
Part Numbers.
Table Number 3
No. of
Pos.
Seating Bar
Part No.
26
50
543494-2
543494-1
543502-2
543502-1
Extra Lacing Stations avail-
able for use with Lacing
Assembly—Part No. 91293-1
Order Lower Tooling
68
100
Notes: All Tooling must be ordered
separately by part number.
Two seating bars required
per tool assembly.
Assembly—Part No. 543481-1
Termination Tooling for
.025 [0.64] Centerline
Ribbon Cable
Used with Manual Arbor
Tool Part No. 91085-2, or
Pneumatic Arbor Tool Part No.
91112-3 and Universal Base
Tool Part No. 768338-4.
Arbor Frame, Part No. 58024-1
Equipped with
Cover Lacing Assembly, Part No. 91293-1
Note: AMP Manual Miniature
Applicator Frame Assembly, Cover
Closing Kit, and Staple Insertion
Kit each must be ordered separately
by part number.
No. of
Pos.
Plug/Receptacle
Upper Tooling Kit
50
68
679235-2
Lower Tooling Assembly
Part No. 543481-1
Note: All part numbers are RoHS compliant.
29
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors
Product Facts
Ⅲ Compact design, profile
for the right-angle header
1.230 x .588 [31.24 x 14.94],
vertical header 1.230 x .433
[31.24 x 11.00], right-angle
stacked headers 1.230 x
.803 [31.24 x 20.40]
Ⅲ Housings and covers made
of UL 94V-0 rated thermo-
plastic
Ⅲ Headers are compatible
with surface mount reflow
solder processes
Ⅲ Header footprint for right-
angle and stacked configura-
tions is .100 x .050
[2.54 x 1.27] staggered
centerlines
Ⅲ Right-angle and stacked
headers feature integral
boardlocks for positive board
retention and grounding
Ⅲ Stacked headers reduce
overall total header volume
by 48% and PC board area
by 38%
Ⅲ Stacked headers offer
optional contact shield for
additional EMI/RFI protection
Shielded AMPLIMITE .050
Series, Slimline Connectors
answer today’s industry
requirement for higher
density in a smaller overall
package. The present line
consists of 26 position,
shielded right-angle, 26
position right-angle stacked
PCB receptacle header, and
mating 26 position plug
connectors. All header, plug
boardlocks for positive board
retention and grounding.
The mating plug connector
consists of a thermoplastic
housing, preloaded with
insulation displacement
contacts (IDC) for fast, reli-
able terminations that offer
greater applied cost sav-
ings. TE offers a choice of
termination equipment to
meet your production
Ⅲ Plugs preloaded with
insulation displacement
contacts (IDC) provide fast,
reliable and economical
terminations
Right-angle stacked headers
provide 52 contacts in a
package only .635 [16.13]
high, allowing parallel
(board-over-board) board
spacing of .800 [20.32].
Centerlines between the top
connector and the bottom
connector measure .335
[8.51] when compared to
.400 [10.16] on the standard
.050 Series stacked headers.
This results in an over-all
reduction of total header
volume, in comparison to
the standard AMPLIMITE
.050 Series header, of 48%,
and a comparative reduction
in PC board area of 38%.
Ⅲ Aesthetically designed back-
shell kits feature easy-to-use
finger grip jackscrews to
requirements.
secure mated connectors
The backshell hardware kit
includes a two-piece, aes-
thetically designed, thermo-
plastic cover over an inner
and outer shield and two,
high strength #2-56 male
jackscrews with insulated
heads (easy finger grip
caps) to secure mated
connectors.
Ⅲ Listed and complies with UL and backshell housings are
1863, Communication
Circuit Accessories,
File No. E81956
made of UL 94V-0 rated
thermoplastic. PCB headers
are compatible with surface
mount reflow solder
processes. Right-angle and
stacked PCB headers fea-
ture con-tact footprints on
.100 x .050 [2.54 x 1.27]
staggered centerlines.
R
Ⅲ Certified by
Canadian Standards
Association
R
File No. 1088108
(LR 7189A-207)
Stacked header board
The AMPLIMITE .050
I Produced under a Quality
Management System certi-
fied to ISO 9001
I A copy of the
certificate is available
upon request
The compact design of the
right-angle header package
measures only 1.230 W x
.588 D x .300 H [31.24 W x
14.94 D x 7.62 H] for maxi-
mum board real estate con-
servation. Right-angle PCB
headers feature integral
retention and stabilization
is provided by two board-
locks and four grounding
posts. In addition, an
Series, Slimline family of
connectors offers keyed
coupling. This feature elimi-
nates the problem of mis-
match mating of plug and
receptacle, particularly in
stacked applications.
optional rear contact shield
is available for additional
EMI/RFI protection.
30
Catalog 82068
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
Revised 4-12
reference purposes only.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors (Continued)
Right-Angle Header,
Receptacle
.118
[3.00]
Date Code Marked
In Area Indicated
.975
[24.77]
.588
[14.94]
Position 1
Part No. 750823-1
Material and Finish
.300
[7.26]
.100
[2.54]
1.230
[31.24]
Housing—UL 94V-0 rated thermo-
plastic, black
Position 26
Bracket—Zinc, plated tin or tin over
copper
.263
Metal-Shell—Carbon steel, plated tin
[6.680]
over copper
.050
[1.27]
Typ.
.338
[8.59]
Boardlocks—Copper alloy, tin plated
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin plated on solder end, all
over nickel
.050
[1.27]
Typ.
.188
[4.76]
.600
[15.24]
Notes:
1. Rear panel mounting only.
2. Female screwlocks to be used with connectors mounted to panels having a thickness of .047 [1.19].
3. See Application Specification 114-40036 for the most up-to-date detailed panel cutout and recommended
PC Board hole pattern.
4. Female screwlocks are not included with receptacles and must be ordered separately. See page 33 for screwlock kit
information.
Note: All part numbers are RoHS compliant.
31
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors (Continued)
Shielded Right-Angle
Stacked Header,
Receptacle
Shield
Date Code Marked
In Area Indicated
.168
[4.27]
.215
[5.46]
2 Plc.
.015
.870
[22.10
0.38
]
.803
[20.40]
Position 1
With Shielding
Position 1
.635
[16.13]
Position 26
1.230
[31.24]
Position 26
Without Shielding
.363
[9.22]
.538
[13.67]
.050
[1.27]
Typ.
Material and Finish:
Housing—UL 94V-0 rated thermo-
plastic, black
Bracket—Zinc, plated tin over copper
Metal-Shell—Carbon steel, plated tin
.050
Typ.
.188
[4.76]
over copper
[1.27]
.600
[15.24]
Boardlocks—Copper alloy, tin plated
Contact Shield—Phosphor bronze,
plated tin
Shielded Header with Rear Contact Shield
Part Numbers
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. on
mating end, tin plated on solder end, all
over nickel
No. of
Positions
Std. Rcpt. without
Rcpt. with
Rear Contact Shield3
Keyed1 Unkeyed2
Rear Contact Shield
Keyed1
Unkeyed2
26/26
—
5786200-1
5750821-1 5750820-1
1Lower header unkeyed with 4-40 threaded holes, upper header keyed in keying
position 1. See page 33 for keying code.
2Both headers unkeyed with 4-40 threaded holes.
3Receptacle includes a metal contact shield for added RFI protection to the rear
of the receptacle assembly.
Note: See Application Specification 114-40036 for the most up-to-date detailed panel cutout and recom-
mended PC Board hole pattern.
Note: All part numbers are RoHS compliant.
32
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors (Continued)
Cable Connector, Plug
Part No. 750833-1
Material and Finish:
.275
[6.99]
Housing and Termination Covers—
UL 94V-0 rated thermoplastic, black
Shell—Steel, plated bright tin over
copper
.576
[14.63]
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin on termination
end, all underplated nickel
.975
[24.77]
1.170
[29.72]
Bracket—Zinc, plated nickel over
copper
Recommended Wire Size—28 AWG
[0.08 mm2] with max. O.D. .032 [0.813].
PVC or polyolefin insulation.
Note: Cable Connectors must be used with Backshell Kits. See page 34.
Keying Code, Receptacle
Keying Code, Plug
Position 1 (Up)
#2-56 Thread
Accessories
.170
[4.32]
Female Screwlock Kit
.142
[3.61]
Material—Stainless Steel
.170
[4.32]
Note: Female screwlocks to be used with con-
nectors mounted to panels having a thickness
of .047 [1.19]
.390
[9.91]
#4-40 Thread
Part No.
Packaging
Individually Packed Kit
(2 Screwlocks per kit)
750831-1
*Minimum order is 510 kits.
Note: All part numbers are RoHS compliant.
33
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors (Continued)
Backshell Kits
1.745
[44.32]
Material and Finish:
Backshells—Copper-nickel alloy
Jackscrews—Steel, plated tin over
copper, handles covered with ABS, gray
1.250
[31.75]
.330
[8.38]
Keyed and Unkeyed Inserts—Zinc,
plated tin over copper
Outside Covers—ABS, gray
Connector shown for illustration purposes
only, must be purchased separately.
.805
[20.45]
Cable Supplied
By Customer
Must Be
TE Approved
Inner Shell
Outer Shell
1.531
[38.89]
1.252
[31.80]
.275
[6.98]
Plug Assembly Must Be
Purchased Separately
Backshell Kits
Unkeyed Kit
Part No.
Cable Dia.
Packaging*
750850-1
750850-2
Individually Packed Kit
Bulk Packed Kit
.250-.280
6.35-7.11
.280-.310
7.11-7.87
750850-3
Individually Packed Kit
*Bulk packaging—100 kits per box.
Note: All part numbers are RoHS compliant.
34
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors, Application Tooling
Discrete Wire
Application Tooling
To meet medium to high
volume production of dis-
crete wire terminations, TE
offers the following tooling:
The CHAMPOMATOR
Model 2.5 Bench
Terminating Machine—
Part No. 354786-1, used in
conjunction with Control
Module—Part No. 852423-I,
and Tie Bar—Part No.
1-762637-3.
Control Module
Part No. 852423-1 120 VAC
852423-2 100 VAC
CHAMPOMATOR
2.5 Machine
Part No. 354786-1
852423-3 230 VAC
Note: CHAMPOMATOR 2.5
Machine and Control Module
must be ordered separately by
part number.
26 Position
Tie Bar
1-762637-3
Wire Setup Gauge
Wire Insulation Dia.
Part No.
in.
mm
.026-.028
.029-.031
.032-.035
0.66-0.71
0.74-0.79
0.81-0.89
763382-3
763382-4
763382-5
Discrete Wire
Application Tooling
For low to medium volume
production use the TE Arbor
Tool—Part No. 58024-1
equipped with Applicator—
Part No. 91291-1 and Special
Locator—Part No. 543506-1.
Arbor Tool
Staple Insertion Kit
Part No. 58024-1
Equipped with
Applicator Part No.
91291-1
Part No. 543515-1
(For use with Miniature Applicator
Frame Assembly
Cable-to-Shell Staple
Tooling (For discrete
wire jacketed cable only)
Part No. 91295-1)
To meet medium to high
volume production use
TE Pneumatic Crimper—
Part No. 312522-3 equipped
with Die Holder Assembly—
Part No. 58449-1 and Die—
Part No. 90437-1 to crimp
outer backshells onto inner
backshells of connector kits
and assemblies.
Backshell Tooling and
Cover Tooling
To assemble backshell into
plastic housing use Manual
Miniature Applicator Frame
Assembly—Part No. 91295-1
equipped with Part No.
543521-1. To assemble
upper cover on lower
cover use Part No. 91295-1
equipped with Part No.
543522-1.
Miniature Applicator Frame Assembly
Part No. 91295-1
Equipped with Cover Closing Kit
Part No. 543508-1
For low volume use Manual
Arbor Tool—Part No. 91085-2,
equipped with Backshell
Crimper Assembly Tool—
Part No. 856684-1.
Pneumatic Bench Tool
No. 312522-3
(Requires Die Set Holder
No. 58449-1)
For tooling information call
Tooling Assistance Center
1-800-722-1111.
Note: All part numbers are RoHS compliant.
35
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Contact Arrangements, Performance
Specifications, Technical Documents—Slimline Connectors
A
Position 1
Contact Arrangements
C
B
Note: Mating face of receptacle is shown, plug is mirror image.
Position No.
No. of
Pos.
A
B
C
26
13
14
26
Mating Cycles (Durability): 500 max.
Performance Specifications
Technical Documents
Current Rating (30°C T-Rise): 1A max., 50% loading
Termination Resistance (Mated): 25 milliohms max.
Insulation Resistance: 1000 megohms min.
Dielectric Withstanding Voltage: 500 VAC
Header Processing Temperature: +220°C max. for 3 minutes
Temperature Range: –55°C to +105°C
Product Specifications describe technical performance
characteristics and verification tests. They are intended for
the Design, Component and Quality Engineer.
108-1366
Shielded AMPLIMITE .050 Series,
Slimline Connectors
Application Specifications describe requirements for using
the product in its intended application and/or termination infor-
mation. They are intended for the Packaging and
Design Engineer and the Setup person.
114-40036
Shielded AMPLIMITE .050 Series,
Slimline Connectors
Instruction Sheets provide instructions for assembling or
applying product. They are intended for Manufacturing
Assembler or Operator.
408-9663
408-6923
408-9701
Mass Insertion Tooling–Part No. 91291-I
AMP Manual Arbor Frame–Part No. 58024-1
Wire Termination Tooling Kit for CHAMPOMATOR 2.5
Machine–Part No. 1-762661-4
408-7777
408-9746
408-9200
408-9721
AMP Manual Arbor Frame w/Slide–Part No. 91085-2
Crimper Assembly–Part No. 856684-1
Single Wire Insertion Tool–Part No. 58430-1
Die Holder Assembly for Pneumatic Crimper–
Part No. 58449-I
408-9788
408-9898
Die Assembly–Part No. 90437-1
Backshell and Cover Tooling Assemblies–
Part No. 543521-1 and 543522-1
Customer Manuals provide information on TE termination
equipment. They are intended for Manufacturing Assemblers or
Operators.
409-5786
409-5791
CHAMPOMATOR 2.5 Machine
CHAMPOMATOR 2.5 Control Module–
Part No. 852423-I
409-5822
409-5843
Pneumatic Crimper–Part No. 312522-3
Pneumatic Power Unit
Note: All part numbers are RoHS compliant.
36
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
millimeters unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Receptacle Assemblies
for .025 [0.64] Centerline Ribbon Cable, Series III
.006
0.15]
E
[
.050
Typ.
[1.27]
.406
[10.31]
see table
Materials:
.786 .015
[19.96 0.38
Panel Mount
Bracket
]
H
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
.004
0.10]
G
.201 .002
[5.11 0.05
[
]
Shell—Steel, plated bright tin over
copper
.423
[10.74]
Bracket—Zinc, plated nickel over
copper
latch
blocks
.170 .002
[4.32 0.05
]
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end; tin on solder end; all nickel
underplated
Termination Cover
Receptacle Housing
.025
[0.64]
Recommended wire size—
.025 [0.64] centerline, 30 AWG
.003
0.08]
F
[
[0.05mm2] and 32 AWG [0.03mm2]
solid or 7 strand, PVC, flat ribbon cable.
Selection of compatible ribbon cable is
the responsibility of the user.
Dimensions
No. of
Pos.
Gold
Plating
Mating Hardware
Part No.
E
F
G
H
1.831
1.602
2.066
N/A
15µ
w/ 4-40 threaded holes
w/ 4-40 threaded holes
1-5390378-5
5390378-5
Technical Documents:
See customer drawings for
Product Performance criteria.
46.50
40.70
52.47
1.831
46.50
1.602
40.70
2.066
52.47
N/A
30µ
flash
15µ
30µ
30µ
15µ
30µ
flash
15µ
30µ
1.831
46.50
1.602
40.70
1.664
42.27
2.066
52.47
w/ latch blocks and
4-40 threaded holes
2-5390399-5
1-5390399-5
5390399-5
50
1.831
46.50
1.602
40.70
1.664
42.27
2.066
52.47
w/ latch blocks and
4-40 threaded holes
I Recognized under
the Component Program
of Underwriters
Laboratories, Inc.,
File No. E28476
1.831
46.50
1.602
40.70
1.664
42.27
2.066
52.47
w/ latch blocks and
4-40 threaded holes
R
1.831
46.50
1.602
40.70
1.664
42.27
2.066
52.47
w/ latch blocks and
2-56 threaded holes
5390379-5
2.281
57.93
2.018
51.50
2.516
63.90
N/A
N/A
w/ 4-40 threaded holes
w/ 4-40 threaded holes
1-5390378-7
5390378-7
I Certified by
Canadian Standards
2.281
57.93
2.018
51.50
2.516
63.90
R
Association,
2.281
57.93
2.018
51.50
2.114
53.70
2.516
63.90
w/ latch blocks and
4-40 threaded holes
File No. LR 7189
2-5390399-7
1-5390399-7
5390399-7
68
2.281
57.93
2.018
51.50
2.114
53.70
2.516
63.90
w/ latch blocks and
4-40 threaded holes
2.281
57.93
2.018
51.50
2.114
53.70
2.516
63.90
w/ latch blocks and
4-40 threaded holes
Note: Termination Tooling: Manual Arbor Press Part No. 91085-2 or Pneumatic Press Part No. 91112-3, Universal
Base Tool Part No. 768338-4, and Connector Specific Kit Part No. 1490479-1.
Note: All part numbers are RoHS compliant.
37
Catalog 82068
Revised 4-12
Dimensions are shown for
Dimensions are in inches and
millimeters unless otherwise
specified.
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
Specifications subject
to change.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
www.te.com
USA: +1 (800) 522-6752
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明