EV200HAABA [MACOM]

KILOVAC EV200 Series Contactor With 1 Form X Contacts Rated 500 Amps, 12-900VDC; KILOVAC EV200系列接触器1 X型触点额定500安培, 12-900VDC
EV200HAABA
型号: EV200HAABA
厂家: Tyco Electronics    Tyco Electronics
描述:

KILOVAC EV200 Series Contactor With 1 Form X Contacts Rated 500 Amps, 12-900VDC
KILOVAC EV200系列接触器1 X型触点额定500安培, 12-900VDC

文件: 总2页 (文件大小:255K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
KILOVAC EV200 Series Contactor With 1 Form X  
Contacts Rated 500+ Amps, 12-900VDC  
Product Facts  
Designed to be the smallest,  
lightest weight, lowest cost sealed  
contactor in the industry with its  
current rating (500+A carry, 2000A  
interrupt at 320VDC).  
Built-in coil economizer – only  
1.7W hold power @ 12VDC and it  
limits back EMF to 0V. Models  
requiring extenal economizer also  
available.  
Optional auxiliary contact for easy  
monitoring of power contact  
position.  
Hermetically sealed – intrinsically  
safe, operates in explosive/harsh  
environments with no oxidation or  
contamination of coils or contacts,  
including long periods of non-  
operation.  
Versatile coil/power connections.  
CE marked for EC applications.  
Typical EV200 applications include battery  
switching and back-up, DC voltage power  
control, circuit protection and safety.  
EV200 Series Contactor  
(CZONKA® Relay, Type III)  
AIAG QS9000 designed, built and  
approved  
File E208033  
For factory-direct application assistance, dial  
800-253-4560, ext. 2055, or 805-220-2055.  
Performance Data  
Parameter  
Contact Arrangement, power contacts  
Rated Operating Voltage  
Units Value for EV200 Series  
1 Form X (SPST-NO-DM)  
VDC 12 - 900  
Coil Operating Voltage (valid over temperature range)  
Voltage (will operate)  
Voltage (Max.)  
9-36VDC  
36VDC  
9VDC  
32-95VDC 48-95VDC  
95VDC  
32VDC  
22VDC  
18VDC  
1.3A  
95VDC  
48VDC  
34VDC  
27VDC  
0.7A  
Continuous (Carry) Current, Typical  
A
500 @ 85°C, 400 mcm conductors  
Pickup (close) Voltage Max.  
Hold Voltage (Min.)  
Consult Factory for required conductors for higher (500+ A) currents  
7.5VDC  
6VDC  
Make/Break Current at Various Voltages 1  
A
A
See next page  
2,000, 1 cycle 3  
/
Dropout (open) Voltage (Min.)  
Inrush Current (Max.)  
Holding Current (Avg.)  
Inrush Time (Max.)  
Break Current at 320VDC 1  
/
/
3.8A  
Contact Resistance, Typ. (@200A)  
Load Life  
mohms 0.2  
0.13A@12V, 0.07A@24V 0.03A@48V 0.02A@72V  
Cycles See next page  
Cycles 1 million  
130ms  
130ms  
130ms  
Mechanical Life  
Contact Arrangement, auxiliary contacts  
1 Form A (SPST-NO)  
Part Numbering System  
Aux. Contact Current, Max.  
Aux. Contact Current, Min.  
A
mA  
2A @ 30VDC / 3A @ 125VAC  
100mA @ 8V  
Typical Part Number  
Series:  
EV200 = 500+ Amp, 12-900VDC Contactor  
EV200  
A
A
A
N
A
Aux. Contact Resistance, Max.  
ohms 0.417 @ 30VDC / .150 @ 125VAC  
Operate Time @ 25°C  
Close (includes bounce), Typ.  
Bounce (after close only), Max.  
Release (includes arcing), Max @ 2000A ms  
ms  
ms  
15  
7
12  
Contact Form:  
A = Normally Open  
H = Normally Open with Aux. Contacts  
Coil Voltage:  
Dielectric Withstanding Voltage  
Insulation Resistance @ 500VDC  
Shock, 11ms 1/2 sine, peak, operating  
Vibration, sine, 80-2000Hz., peak  
Operating Ambient Temperature  
Weight, Nominal  
Vrms 2,200 @ sea level (leakage <1mA)  
megohms 100 2  
A = 9-36VDC (1 = requires external coil economizer)  
D = 32-95VDC (2 = requires external coil economizer)  
J = 48-95VDC (3 = requires external coil economizer)  
R = 28VDC with Mechanical Economizer  
/
G
G
20  
20  
Coil Wire Length:  
A = 15.3 in (390 mm)  
°C  
-40 to +85  
B = 6.0 in (152 mm)  
lb.(kg) .95 (.43)  
Coil Terminal Connector:  
N = None  
B = Yazaki 7282-5558-10 male, 7114-4102-02, 7158-3030-50  
+red is pin 2 (B length only)  
C = Molex Mini-fit Jr, 2 Ckt, Female 18-24, P/N 39-01-2020 &  
39-00-0060 +red is pin 1 (A length only)  
1/ Main power contacts  
2/ 50 at end of life  
3/ Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts  
Mounting & Power Terminals:  
A = Bottom Mount & Male 10mm x M8 Terminals  
© 2004 & 2007 by Tyco Electronics Corporation. All Rights Reserved.  
KILOVAC, CZONKA, TE mark and TYCO ELECTRONICS are trademarks.  
Other products and company names mentioned herein may be trademarks of their  
respective owners.  
1
Catalog EV200--R-TBD  
Revised 8-07  
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
C. America: 52-55-5-729-0425  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
UK: 44-141-810-8967  
www.tycoelectronics.com  
500+ Amp, 12-900VDC Contactor with  
1 Form A (SPST-NO) Contacts  
KILOVAC EV200 Series (CZONKA® Relay, Type III) (Continued)  
Outline Dimensions  
M8 x 1.25 POWER TERMINALS  
(HARDWARE SUPPLIED):  
2 X M8 WASHER, STAINLESS  
1.05 ± .01  
(26.67 ± .26)  
2.29 ± .02 DIA  
(58.19 ± .51)  
2 X M8 LOCKWASHER – SPLIT RING, STAINLESS  
2 X M8 x 1.25 NUT, STAINLESS  
TORQUE 80 TO 100 IN-LB (8.8 TO 11 NM)  
A1 "+" POSITIVE TERMINAL  
A2 "–" NEGATIVE TERMINAL  
.225 ± .01DIA  
(5.72 ± .26)  
MOUNTING HARDWARE (NOT SUPPLIED):  
2 X M5 BOLT  
2 X M5 LOCKWASHER  
2 X M5 NARROW WASHER  
TORQUE 15 TO 30 IN-LB (1.7 TO 3.3 NM)  
1.65 ± .01  
(42.0 ± .26)  
2.688 ± .01  
(68.28 ± .26)  
WHITE = AUXILIARY CONTACT  
(WHEN ORDERED)  
AUXILIARY CONTACT LEADS  
BLACK = – COIL  
RED = + COIL  
COIL LEADS  
SEE COIL WIRE  
LENGTH IN P/N  
2.20 ± .025  
(55.81 ± .63)  
2.85 ± .025  
(72.3 ± .63)  
STAINLESS  
2.04 ± .02 DIA  
(51.94 ± .51)  
.55 ± .025  
(14.04 ± .63)  
2.05 ± .02  
(52 ± .51)  
2.58 ± .02  
(65.6 ± .51)  
3.17 ± .01  
(80.48 ± .26)  
.5 ± .01  
(12.6 ± .26)  
Estimated Make & Break Power Switching Ratings  
Electrical Load Life Ratings for Typical EV Applications  
Make and Break Power Switching Region  
Break Only Above 650A  
650A  
Make/Break Life Capacitive & Resistive Loads at 320VDC (1) (2)  
100,000  
10,000  
1,000  
100  
@90% capacitive pre-charge (make only) see chart below  
@80% capacitive pre-charge (make only) see chart below  
@200A make/break (2 consecutive, reverse polarity) (1)  
2,000A (break only) (1)  
Cycles  
Cycles  
Cycles  
Cycles  
50,000  
50  
12  
1*  
Mechanical Life  
Cycles 1 million  
(1) Resistive load includes inductance L = 25µH. Load @ 2500A tested @ 200µH.  
(2) Life based on projected Weibull Life with 95% teliability.  
* Does not meet dielectric and IR after test.  
EV200 Capacitive Make Test Curves for Pre-Charged Motor Controller  
700  
650  
600  
10  
80% Minimum  
Pre Charge  
550  
500  
450  
400  
350  
300  
250  
200  
150  
100  
50  
1
1
10  
100  
1,000  
10,000  
Load Current (A)  
NOTES:  
90% Nominal  
Pre Charge  
1) For resistive loads with 300H maximum inductance. Consult factory for inductive loads.  
2) Estimates based on extrapolated data. User is encouraged to confirm performance in application.  
3) End of life when dielectric strength between terminals falls below 50 megohms @ 500VDC.  
4) The maximum make current is 650A to avoid contact welding.  
0
0.0  
0.5  
1.0  
1.5  
2.0  
Time (ms)  
For factory-direct application assistance, dial  
800-253-4560, ext. 2055, or 805-220-2055.  
EV200--R-TBD – 0M – KRG – FP – 8-07  
Printed in U.S.A.  
2
Dimensions are in inches and  
millimeters unless otherwise  
specified. Values in brackets  
are metric equivalents.  
Dimensions are shown for  
reference purposes only.  
Specifications subject  
to change.  
USA: 1-800-522-6752  
South America: 55-11-3611-1514  
Hong Kong: 852-2735-1628  
Japan: 81-44-844-8013  
Canada: 1-905-470-4425  
Mexico: 01-800-733-8926  
www.tycoelectronics.com  
C. America: 52-55-5-729-0425  
UK: 44-141-810-8967  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY