MA4P4002B-402 [MACOM]
High Avg. Power;型号: | MA4P4002B-402 |
厂家: | Tyco Electronics |
描述: | High Avg. Power 衰减器 开关 二极管 |
文件: | 总12页 (文件大小:1650K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Package Styles
Features
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
High Power Handling
Low Loss / Low Distortion
Voltage Ratings up to 1000 Volts
Passivated Chip for Low Leakage Current
Low Theta (θ) Due to Full Face Chip Bonding
Leadless Low Inductance MELF Packages
Various Package Options
Available as Chips
Fully RoHS Compliant
401 & 402
Non-Magnetic Packages Available for MRI
1072 & 1091
Description
Applications
HIPAX PIN diodes are designed for use in a wide
variety of switch and attenuator applications from HF
through UHF frequencies and at power levels above
1kW, CW. The internal chip as well as each diode
assembly has been comprehensively tested and
characterized to ensure predictable and repeatable
performance.
M/A-COM Technology Solutions MELF and HIPAX
PIN diode series are designed for usage in switch
and attenuator applications requiring high power
handling and low distortion. The MELF and HIPAX
PIN diodes incorporate a fully passivated PIN diode
chip resulting in an extremely low reverse bias
leakage current. The semiconductor technology
utilized in the MELF and HIPAX families draws on
M/A-COM Tech’s substantial experience in PIN
diode design and wafer fabrication. The result is a
device which has a thick I-region and long carrier
lifetime while maintaining low series resistance and
capacitance values. The chips of the MELF and
HIPAX PIN diodes are enclosed in a rugged
ceramic package and is full face bonded to metal
pins on both the anode and cathode. The result is a
low loss PIN diode with low thermal resistance due
to symmetrical thermal paths. The parts are offered
in either magnetic or non-magnetic, HIPAX (axial
leaded) or Metal Electrode Leadless Faced (MELF)
surface mount packages for MRI applications. The
MELF is a rectangular SMQ, package which is
designed for high volume tape and reel assembly.
This easy to use package design makes automatic
pick and place, indexing and assembly, extremely
easy. The parallel flat surfaces are suitable for most
key jaw or vacuum pick-up techniques. All of the
solderable surfaces are tin plated and compatible
with industry standard reflow and vapor phase
soldering processes. See page 7 of Application
Note M538 on the M/A-COM Technology Solutions
website for a typical solder reflow profile.
Design Recommendations
♦Low Distortion Attenuators
•MA4P4301B
♦Surface Mount Switches
•MA4P7101F
♦Cellular Radio Antenna Switches
• MA4P1200, MA4P1250
Absolute Maximum Ratings
TAMB = +25°C (Unless Otherwise Noted) 1
Parameter
Absolute Maximum
D.C. Reverse Voltage (VR)
(See Tables)
Operating Chip Junction
Temperature
-55°C to +175°C
Storage Temperature
Installation Temperature
ESD
-55°C to +200°C
+280°C for 30 Seconds
Class 1A, HBM
Notes
1.Operation of this device above any one of these
parameters may cause permanent damage.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
1
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MA4P1000 Series Electrical Specifications @ TAMB = +25°C
RS
RP
VR
Reverse Voltage
VDC
CT
Total Capacitance
pF
Series Resistance Parallel Resistance
Ω
kΩ
Part Number
Conditions
Conditions
Conditions
Condition
(NM Indicates Non-Magnetic)
f = 1 MHz
VR = 50 V
f = 100 MHz
IF = 50 mA
f = 100 MHz
VR = 0 V
IR = 10 μA
MAXIMUM
MINIMUM
TYPICAL MAXIMUM TYPICAL MAXIMUM
MINIMUM
RATING
MA4P1200 - 401T
MA4P1200NM - 401T
MA4P1250 -1072T
50
50
50
100
100
100
1.2
1.2
0.8
1.5
1.5
1.2
0.5
0.5
0.5
0.75
0.75
0.75
5
5
5
MA4P1250NM -1072T
MA4P1450 -1091T
50
50
100
100
0.8
1.8
1.2
2.5
0.5
0.5
0.75
0.75
5
5
TL
Forward Bias
Reverse Bias
VF
Carrier Lifetime
Harmonic Distortion Harmonic Distortion
Forward Voltage
(Max. I Forward @ 1V ≤ 1.5A)
R(2a/a) * R(3a/a)
R(2a/a) – R(3a/a)
Part Number
Condition
IF = 50 mA
Conditions
IF = 10 mA
Conditions
f = 100 MHz
Conditions
f = 100 MHz
(NM Indicates Non-Magnetic)
MAXIMUM
TYPICAL
MINIMUM TYPICAL MINIMUM TYPICAL MINIMUM TYPICAL
RATING
MA4P1200 - 401T
MA4P1200NM - 401T
MA4P1250 -1072T
MA4P1250NM -1072T
MA4P1450 -1091T
0.85
0.85
0.85
0.85
0.85
1.0
1.0
1.0
1.0
1.0
2
2
2
2
2
8
8
8
8
8
80
80
80
80
80
90
90
90
90
90
60
60
60
60
60
70
70
70
70
70
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel
Power Dissipation and Thermal Resistance Ratings @ TAMB = +25°C
MA4P1200(NM)-401T
MA4P1250(NM)-1072T
MA4P1450-1091T
Package
Style
CONDITION
PDISS
1.5 W
5.5W
θJC
PDISS
—
θJC
—
PDISS
—
θJC
—
No Heatsink
B
15°C/W
Axial Lead
Lead Length 1/4"
No Heatsink
—
—
—
—
6W
18W
10W
30W
F
15°C/W
5°C/W
MELF
Infinite Heatsink
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
2
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1200 Series
Capacitance vs. Frequency & Reverse Bias
Series Resistance @ 100 MHz vs. Forward Current
pF
Ω
MHz
Frequency
Forward Current
Heatsink Temperature vs. Max. Power Dissipation
Parallel Resistance vs. Frequency & Reverse Bias
Ω
MHz
Frequency
°C
Heatsink Temperature
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
3
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1250 Series
Series Resistance @ 100 MHz vs. Forward Current
Capacitance vs. Frequency & Reverse Bias
pF
Ω
MHz
Forward Current
Frequency
Parallel Resistance vs. Frequency & Reverse Bias
Carrier Lifetime vs. Forward Bias Current
Ω
MHz
Frequency
Forward Current
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
4
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1450 Series
Capacitance vs. Frequency and Reverse Bias
Series Resistance @ 100 MHz vs. Forward Current
pF
Ω
MHz
Frequency
Forward Current
Parallel Resistance vs. Frequency and Reverse Bias
Ω
MHz
Frequency
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
5
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MA4P4000 - MA4P7100 Series Electrical Specifications @ TAMB = +25°C
MA4P4000 MA4P4300
MA4P7000 MA4P7100
Parameter
Symbol
Condition
Series
Series
Series
Series
Maximum Series Resistance
Maximum Total Capacitance
Minimum Parallel Resistance
Minimum Carrier Lifetime
Maximum Forward Voltage
Maximum Reverse Current
Nominal I-Region Width
RS
CT
RP
TL
VF
IR
IF = 100 mA
VR = 100 V
VR = 100 V
IF = 10 mA
IF = 100 mA
At max. rated voltage
—
0.5 Ω
1.0 Ω
0.9 Ω
0.5 Ω
2.2 pF
2.0 pF
0.7 pF
1.0 pF
20 kΩ
20 µs
1.0 V
50 kΩ
15 µs
1.2 V
200 kΩ
5 µs
100 kΩ
2.5 µs
1.0 V
1.0 V
1 µA
1 µA
1 µA
1 µA
μ
175 µm
300 µm
175 µm
100 µm
Maximum Reverse Voltage Rating ( VR )
Maximum Reverse
Voltage Rating
MA4P4000
Series
MA4P4300
Series
MA4P7000
Series
MA4P7100
Series
MA4P4001B-402
MA4P4001BNM-402
MA4P4001F-1091T
MA4P4301B-402
MA4P4301F-1091T
MA4P7101B-401T
MA4P7101F-1072T
100 Volts
MA4P7001F-1072T
MA4P7002B-401T
MA4P4002B-402
MA4P4002F-1091T
MA4P7102B-401T
MA4P7002F-1072T MA4P7102F-1072T
200 Volts
400 Volts
MA4P4302B-402
MA4P7104B-401T
MA4P7104F-1072T
—
—
—
—
MA4P4006F-1091T
MA4P4006B-402
MA4P7006B-401T
—
600 Volts
MA4P7006F-1072T
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel
MA4P4000
Series
MA4P4300
Series
PDISS θJC
MA4P7000
Series
MA4P7100
Series
Package Style
Condition
PDISS
θJC
PDISS
θJC
PDISS
θJC
1/4” Lead Length
No Heatsink
12 W 12.5°C/W 10 W 15°C/W
5 W
30°C/W
6 W
25°C/W
B
Axial Leaded
2.5 W
7.5 W
—
20°C/W
—
2.5 W
5 W
—
30°C/W
—
1.5 W
—
1.5 W
—
F
Infinite Heatsink
Single 1 µs pulse
10 W 15°C/W 11.5 W 13°C/W
15 kW 15 kW
MELF
Both B and F
Both B and F
100 kW
100 kW
—
—
Single 100 µs pulse 5 kW 0.03°C/W 5 kW 0.03°C/W 300 W 0.5°C/W 300 W 0.5°C/W
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
6
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000,MA4P4300, MA4P7000, MA4P7100 Series
Series Resistance at 100 MHz vs. Forward Current
MA4P4000, MA4P4300 Series
Series Resistance at 100 MHz vs. Forward Current
MA4P7000, MA4P7100 Series
Ω
Ω
Forward Current
Forward Current
Carrier Lifetime vs. Forward Bias Current
Thermal Resistance vs. Pulse Width
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
µS
°C/W
Forward Current
Pulse Width
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
7
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Capacitance vs. Frequency & Reverse Bias
Capacitance vs. Frequency & Reverse Bias
MA4P4000 Series
MA4P4300 Series
pF
pF
MHz
Frequency
MHz
Frequency
Capacitance vs. Frequency & Reverse Bias
MA4P7100 Series
Capacitance vs. Frequency & Reverse Bias
MA4P7000 Series
pF
pF
MHz
MHz
Frequency
Frequency
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
8
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4000 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4300 Series
Ω
Ω
Volts
Volts
Reverse Bias
Reverse Bias
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7000 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7100 Series
Ω
Ω
Volts
Volts
Reverse Bias
Reverse Bias
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
9
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Case Styles
401 Axial Leaded Packages
Cathode Band
402 Axial Leaded Packages
Cathode Band
B
B
D
D
C
C
A
C
C
A
401 Package
(tape and reel only)
402 Package
(bulk only)
INCHES
MM
INCHES
MM
500 or 1000pcs/reel
specify when ordering
100pcs/bag
MIN. MAX. MIN. MAX.
MIN. MAX MIN. MAX.
A
—
0.230
0.140
—
5.84
A
B
—
—
0.130
0.090
—
—
3.30
2.29
—
MA4P1200-401T
MA4P1200NM-401T
MA4P7002B-401T
MA4P7006B-401T
MA4P7101B-401T
MA4P7102B-401T
MA4P7104B-401T
MA4P4001B-402
MA4P4001BNM-402
MA4P4002B-402
MA4P4006B-402
MA4P4301B-402
MA4P4302B-402
B
C
—
—
3.56
—
0.975
24.77
C 0.975
24.77
D
0.039 0.041 0.99 1.04
D 0.027 0.029 0.69 0.74
1072 MELF Surface Mount Packages
1091 MELF Surface Mount Packages
Cathode
Cathode
B
A
B
A
Solderable
Surfaces
Solderable
Surfaces
A
A
C
C
1072 Package
(tape and reel only)
1091 Package
(tape and reel only)
INCHES
MM
INCHES
MM
1500 or 5000pcs/reel
specify when ordering
500pcs/reel
MIN. MAX. MIN. MAX.
MIN. MAX. MIN. MAX.
MA4P1250-1072T
MA4P1250NM-1072T
MA4P7001F-1072T
MA4P7002F-1072T
MA4P7006F-1072T
MA4P7101F-1072T
MA4P7104F-1072T
A 0.080 0.095 2.032 2.413
A
B
C
0.138 0.155 3.51 3.94
MA4P1450-1091T
MA4P4001F-1091T
MA4P4002F-1091T
MA4P4006F-1091T
MA4P4301F-1091T
B 0.115 0.125 2.921 3.175
C 0.008 0.023 0.203 0.584
0.181 0.191 4.57 4.85
0.011 0.026 0.279 0.660
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
10
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MELF Assembly Recommendations
♦ Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. Axial leads and solderable
surfaces of MELF devices are tin plated 50 μm thick to ensure an optimum connection.
MELF Internal Construction
Circuit Pad Layout for MELF Diodes
Package Style
1072
Package Style
1091
Dimension
inches
mm
inches
mm
A
B
C
0.093
0.050
0.060
2.36
1.27
1.52
0.150
0.050
0.100
3.81
1.27
2.54
Ordering Information
MELF diodes are available in tape and reel in quantities as shown in table below
Package Style
Quantity (7” Reel)
Bulk Devices Per Bag
1072T
1091T
1500 or 5000
500
N/A
N/A
Tape and reel information can be found on the M/A-COM website at http://www.macomtech.com/Application Notes/pdf/M513.pdf
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
11
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Axial Leaded HIPAX Assembly Recommendations
♦ Bends on case styles 401 and 402, axially leaded devices, must be made while holding the lead firm and forming the
bend no closer than .060 inches from the body of the part. Bending the lead < 0.060 inches from the body of the part
is not recommended and may cause internal damage to the chip. Appropriate fixturing should be used.
♦ Devices may be soldered using standard 60Sn/40Pb or any RoHS compliant solders. Axial leads are tin plated 50μm
thick to ensure an optimum connection.
♦ For recommended Sn/Pb and RoHS soldering profiles see page 7 of Application Note M538 on the M/A-COM Tech-
Case Style 401 & 402
Internal Construction
Case Style 401 & 402
Minimum Bend Distance
Cathode Band
Passivated Chip
.060” Min
.060” Min
Ordering Information
Axial leaded diodes are available in tape and reel or bulk in quantities shown in the table below
Package Style
Quantity Per Reel
Bulk Devices Per Bag
401T
402
500 or 1000 (specify qty. when ordering)
N/A
N/A
100
Environmental Ratings
HIPAX PIN diodes are designed to meet most environmental and electrical requirements and may be ordered
screened to MIL-STD-750 specifications as described in the table below.
TEST
METHOD
DESCRIPTION/ CONDITIONS
Moisture Resistance
High Temperature Storage
HTRB
1021
1031
85°C, 85% Relative Humidity, 168 hrs
+175°C , 250 Hours
1038
80% of rated VR, 50°C, 96 Hours
-65°C to +175°C, 20 Cycles
1 X 10-7 CC/Sec
Temperature Shock
Fine Leak
1051
1071 Cond. H
2006
Constant Acceleration
Solderability
20,000 G’s
2026
IPC/JDEC J-STD-02
Tension1
Lead Fatigue1
2036.3 Cond. A
2036.3 Cond. E
2 Lbs., 30 Seconds
3 Cycles, 8 oz., 90°,
Note:
1) Test applicable to HIPAX axially leaded devices only.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
12
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明